diff options
Diffstat (limited to 'vlib/vlib/threads_cli.c')
-rw-r--r-- | vlib/vlib/threads_cli.c | 362 |
1 files changed, 362 insertions, 0 deletions
diff --git a/vlib/vlib/threads_cli.c b/vlib/vlib/threads_cli.c new file mode 100644 index 00000000000..26cb2213d95 --- /dev/null +++ b/vlib/vlib/threads_cli.c @@ -0,0 +1,362 @@ +/* + * Copyright (c) 2015 Cisco and/or its affiliates. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include <vppinfra/format.h> +#include <vlib/vlib.h> + +#include <vlib/threads.h> + +static clib_error_t * +show_threads_fn (vlib_main_t * vm, + unformat_input_t * input, + vlib_cli_command_t * cmd) +{ + vlib_worker_thread_t * w; + int i; + + vlib_cli_output (vm, "%-7s%-20s%-12s%-8s%-7s%-7s%-7s%-10s", + "ID", "Name", "Type", "LWP", + "lcore", "Core", "Socket", "State"); + +#if !defined(__powerpc64__) + for (i = 0; i < vec_len(vlib_worker_threads); i++) + { + w = vlib_worker_threads + i; + u8 * line = NULL; + + line = format(line, "%-7d%-20s%-12s%-8d", + i, + w->name ? w->name : (u8 *) "", + w->registration ? w->registration->name : "", + w->lwp); + +#if DPDK==1 + int lcore = w->dpdk_lcore_id; + if (lcore > -1) + { + line = format(line, "%-7u%-7u%-7u", + lcore, + lcore_config[lcore].core_id, + lcore_config[lcore].socket_id); + + switch(lcore_config[lcore].state) + { + case WAIT: + line = format(line, "wait"); + break; + case RUNNING: + line = format(line, "running"); + break; + case FINISHED: + line = format(line, "finished"); + break; + default: + line = format(line, "unknown"); + } + } +#endif + vlib_cli_output(vm, "%v", line); + vec_free(line); + } +#endif + + return 0; +} + + +VLIB_CLI_COMMAND (show_threads_command, static) = { + .path = "show threads", + .short_help = "Show threads", + .function = show_threads_fn, +}; + +/* + * Trigger threads to grab frame queue trace data + */ +static clib_error_t * +trace_frame_queue (vlib_main_t *vm, unformat_input_t *input, + vlib_cli_command_t *cmd) +{ + clib_error_t * error = NULL; + frame_queue_trace_t *fqt; + frame_queue_nelt_counter_t *fqh; + vlib_thread_main_t *tm = vlib_get_thread_main(); + u32 num_fq; + u32 fqix; + u32 enable = 0; + + if (unformat(input, "on")) { + enable = 1; + } else if (unformat(input, "off")) { + enable = 0; + } else { + return clib_error_return(0, "expecting on or off"); + } + + num_fq = vec_len(vlib_frame_queues); + if (num_fq == 0) + { + vlib_cli_output(vm, "No frame queues exist\n"); + return error; + } + + // Allocate storage for trace if necessary + vec_validate_aligned(tm->frame_queue_traces, num_fq-1, CLIB_CACHE_LINE_BYTES); + vec_validate_aligned(tm->frame_queue_histogram, num_fq-1, CLIB_CACHE_LINE_BYTES); + + for (fqix=0; fqix<num_fq; fqix++) { + fqt = &tm->frame_queue_traces[fqix]; + fqh = &tm->frame_queue_histogram[fqix]; + + memset(fqt->n_vectors, 0xff, sizeof(fqt->n_vectors)); + fqt->written = 0; + memset(fqh, 0, sizeof(*fqh)); + vlib_frame_queues[fqix]->trace = enable; + } + return error; +} + +VLIB_CLI_COMMAND (cmd_trace_frame_queue,static) = { + .path = "trace frame-queue", + .short_help = "trace frame-queue (on|off)", + .function = trace_frame_queue, + .is_mp_safe = 1, +}; + + +/* + * Adding two counters and compute percent of total + * Round up, e.g. 0.000001 => 1% + */ +static u32 +compute_percent (u64 *two_counters, u64 total) +{ + if (total == 0) + { + return 0; + } + else + { + return (((two_counters[0] + two_counters[1]) * 100) + (total-1)) / total; + } +} + +/* + * Display frame queue trace data gathered by threads. + */ +static clib_error_t * +show_frame_queue_internal (vlib_main_t *vm, + u32 histogram) +{ + vlib_thread_main_t *tm = vlib_get_thread_main(); + clib_error_t * error = NULL; + frame_queue_trace_t *fqt; + frame_queue_nelt_counter_t *fqh; + u32 num_fq; + u32 fqix; + + num_fq = vec_len(tm->frame_queue_traces); + if (num_fq == 0) + { + vlib_cli_output(vm, "No trace data for frame queues\n"); + return error; + } + + if (histogram) + { + vlib_cli_output(vm, "0-1 2-3 4-5 6-7 8-9 10-11 12-13 14-15 " + "16-17 18-19 20-21 22-23 24-25 26-27 28-29 30-31\n"); + } + + for (fqix=0; fqix<num_fq; fqix++) { + fqt = &(tm->frame_queue_traces[fqix]); + + vlib_cli_output(vm, "Thread %d %v\n", fqix, vlib_worker_threads[fqix].name); + + if (fqt->written == 0) + { + vlib_cli_output(vm, " no trace data\n"); + continue; + } + + if (histogram) + { + fqh = &(tm->frame_queue_histogram[fqix]); + u32 nelt; + u64 total = 0; + + for (nelt=0; nelt<FRAME_QUEUE_MAX_NELTS; nelt++) { + total += fqh->count[nelt]; + } + + /* + * Print in pairs to condense the output. + * Allow entries with 0 counts to be clearly identified, by rounding up. + * Any non-zero value will be displayed as at least one percent. This + * also means the sum of percentages can be > 100, but that is fine. The + * histogram is counted from the last time "trace frame on" was issued. + */ + vlib_cli_output(vm, + "%3d%% %3d%% %3d%% %3d%% %3d%% %3d%% %3d%% %3d%% " + "%3d%% %3d%% %3d%% %3d%% %3d%% %3d%% %3d%% %3d%%\n", + compute_percent(&fqh->count[ 0], total), + compute_percent(&fqh->count[ 2], total), + compute_percent(&fqh->count[ 4], total), + compute_percent(&fqh->count[ 6], total), + compute_percent(&fqh->count[ 8], total), + compute_percent(&fqh->count[10], total), + compute_percent(&fqh->count[12], total), + compute_percent(&fqh->count[14], total), + compute_percent(&fqh->count[16], total), + compute_percent(&fqh->count[18], total), + compute_percent(&fqh->count[20], total), + compute_percent(&fqh->count[22], total), + compute_percent(&fqh->count[24], total), + compute_percent(&fqh->count[26], total), + compute_percent(&fqh->count[28], total), + compute_percent(&fqh->count[30], total)); + } + else + { + vlib_cli_output(vm, " vector-threshold %d ring size %d in use %d\n", + fqt->threshold, fqt->nelts, fqt->n_in_use); + vlib_cli_output(vm, " head %12d head_hint %12d tail %12d\n", + fqt->head, fqt->head_hint, fqt->tail); + vlib_cli_output(vm, " %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d\n", + fqt->n_vectors[0], fqt->n_vectors[1], fqt->n_vectors[2], fqt->n_vectors[3], + fqt->n_vectors[4], fqt->n_vectors[5], fqt->n_vectors[6], fqt->n_vectors[7], + fqt->n_vectors[8], fqt->n_vectors[9], fqt->n_vectors[10], fqt->n_vectors[11], + fqt->n_vectors[12], fqt->n_vectors[13], fqt->n_vectors[14], fqt->n_vectors[15]); + + if (fqt->nelts > 16) + { + vlib_cli_output(vm, " %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d %3d\n", + fqt->n_vectors[16], fqt->n_vectors[17], fqt->n_vectors[18], fqt->n_vectors[19], + fqt->n_vectors[20], fqt->n_vectors[21], fqt->n_vectors[22], fqt->n_vectors[23], + fqt->n_vectors[24], fqt->n_vectors[25], fqt->n_vectors[26], fqt->n_vectors[27], + fqt->n_vectors[28], fqt->n_vectors[29], fqt->n_vectors[30], fqt->n_vectors[31]); + } + } + + } + return error; +} + +static clib_error_t * +show_frame_queue_trace (vlib_main_t *vm, unformat_input_t *input, + vlib_cli_command_t *cmd) +{ + return show_frame_queue_internal (vm, 0); +} + +static clib_error_t * +show_frame_queue_histogram (vlib_main_t *vm, unformat_input_t *input, + vlib_cli_command_t *cmd) +{ + return show_frame_queue_internal (vm, 1); +} + +VLIB_CLI_COMMAND (cmd_show_frame_queue_trace,static) = { + .path = "show frame-queue", + .short_help = "show frame-queue trace", + .function = show_frame_queue_trace, +}; + +VLIB_CLI_COMMAND (cmd_show_frame_queue_histogram,static) = { + .path = "show frame-queue histogram", + .short_help = "show frame-queue histogram", + .function = show_frame_queue_histogram, +}; + + +/* + * Modify the number of elements on the frame_queues + */ +static clib_error_t * +test_frame_queue_nelts (vlib_main_t *vm, unformat_input_t *input, + vlib_cli_command_t *cmd) +{ + clib_error_t * error = NULL; + u32 num_fq; + u32 fqix; + u32 nelts = 0; + + unformat(input, "%d", &nelts); + if ((nelts != 4) && (nelts != 8) && (nelts != 16) && (nelts != 32)) { + return clib_error_return(0, "expecting 4,8,16,32"); + } + + num_fq = vec_len(vlib_frame_queues); + if (num_fq == 0) + { + vlib_cli_output(vm, "No frame queues exist\n"); + return error; + } + + for (fqix=0; fqix<num_fq; fqix++) { + vlib_frame_queues[fqix]->nelts = nelts; + } + + return error; +} + +VLIB_CLI_COMMAND (cmd_test_frame_queue_nelts,static) = { + .path = "test frame-queue nelts", + .short_help = "test frame-queue nelts (4,8,16,32)", + .function = test_frame_queue_nelts, +}; + + +/* + * Modify the max number of packets pulled off the frame queues + */ +static clib_error_t * +test_frame_queue_threshold (vlib_main_t *vm, unformat_input_t *input, + vlib_cli_command_t *cmd) +{ + clib_error_t * error = NULL; + u32 num_fq; + u32 fqix; + u32 threshold = 0; + + if (unformat(input, "%d", &threshold)) { + } else { + vlib_cli_output(vm, "expecting threshold value\n"); + return error; + } + + if (threshold == 0) + threshold = ~0; + + num_fq = vec_len(vlib_frame_queues); + if (num_fq == 0) + { + vlib_cli_output(vm, "No frame queues exist\n"); + return error; + } + + for (fqix=0; fqix<num_fq; fqix++) { + vlib_frame_queues[fqix]->vector_threshold = threshold; + } + + return error; +} + +VLIB_CLI_COMMAND (cmd_test_frame_queue_threshold,static) = { + .path = "test frame-queue threshold", + .short_help = "test frame-queue threshold N (0=no limit)", + .function = test_frame_queue_threshold, +}; + |