diff options
Diffstat (limited to 'vnet/etc/scripts/virl/simple.virl')
| -rw-r--r-- | vnet/etc/scripts/virl/simple.virl | 389 |
1 files changed, 0 insertions, 389 deletions
diff --git a/vnet/etc/scripts/virl/simple.virl b/vnet/etc/scripts/virl/simple.virl deleted file mode 100644 index 6033c42c36a..00000000000 --- a/vnet/etc/scripts/virl/simple.virl +++ /dev/null @@ -1,389 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="yes"?> -<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd"> - <extensions> - <entry key="management_network" type="String">flat</entry> - </extensions> - <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="427,219" ipv4="192.168.0.2"> - <extensions> - <entry key="config" type="string">! -! Last configuration change at 14:27:32 UTC Fri Mar 27 2015 -! -version 15.4 -service timestamps debug datetime msec -service timestamps log datetime msec -no service password-encryption -! -hostname iosv-1 -! -boot-start-marker -boot-end-marker -! -! -enable password cisco -! -no aaa new-model -! -! -! -mmi polling-interval 60 -no mmi auto-configure -no mmi pvc -mmi snmp-timeout 180 -! -! -! -! -! -! -! -! -! -! -! -! -! -no ip domain lookup -ip cef -ipv6 unicast-routing -ipv6 cef -! -multilink bundle-name authenticated -! -! -cts logging verbose -! -! -! -redundancy -! -! -! -! -! -! -! -! -! -! -! -! -! -! -! -interface Loopback0 - description Loopback - ip address 192.168.0.2 255.255.255.255 -! -interface GigabitEthernet0/0 - description OOB Management - ip address 172.16.1.167 255.255.255.0 - duplex auto - speed auto - media-type rj45 -! -interface GigabitEthernet0/1 - description to vpp-1 - ip address 10.0.0.5 255.255.255.252 - ip ospf cost 1 - duplex auto - speed auto - media-type rj45 -! -router ospf 1 - passive-interface Loopback0 - network 10.0.0.4 0.0.0.3 area 0 - network 192.168.0.2 0.0.0.0 area 0 -! -router bgp 1 - bgp router-id 192.168.0.2 - bgp log-neighbor-changes - neighbor 192.168.0.3 remote-as 1 - neighbor 192.168.0.3 description iBGP peer iosv-2 - neighbor 192.168.0.3 update-source Loopback0 - ! - address-family ipv4 - network 192.168.0.2 mask 255.255.255.255 - neighbor 192.168.0.3 activate - exit-address-family -! -ip forward-protocol nd -! -! -no ip http server -no ip http secure-server -ip route 10.0.0.9 255.255.255.255 10.0.0.6 -! -! -! -! -control-plane -! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh -! -no scheduler allocate -! -end</entry> - <entry key="AutoNetkit.mgmt_ip" type="string"></entry> - </extensions> - <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/> - </node> - <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="704,221" ipv4="192.168.0.3"> - <extensions> - <entry key="config" type="string">! -! Last configuration change at 14:26:58 UTC Fri Mar 27 2015 -! -version 15.4 -service timestamps debug datetime msec -service timestamps log datetime msec -no service password-encryption -! -hostname iosv-2 -! -boot-start-marker -boot-end-marker -! -! -enable password cisco -! -no aaa new-model -! -! -! -mmi polling-interval 60 -no mmi auto-configure -no mmi pvc -mmi snmp-timeout 180 -! -! -! -! -! -! -! -! -! -! -! -! -! -no ip domain lookup -ip cef -ipv6 unicast-routing -ipv6 cef -! -multilink bundle-name authenticated -! -! -cts logging verbose -! -! -! -redundancy -! -! -! -! -! -! -! -! -! -! -! -! -! -! -! -interface Loopback0 - description Loopback - ip address 192.168.0.3 255.255.255.255 -! -interface GigabitEthernet0/0 - description OOB Management - ip address 172.16.1.164 255.255.255.0 - duplex auto - speed auto - media-type rj45 -! -interface GigabitEthernet0/1 - description to vpp-1 - ip address 10.0.0.9 255.255.255.252 - ip ospf cost 1 - duplex auto - speed auto - media-type rj45 -! -router ospf 1 - passive-interface Loopback0 - network 10.0.0.8 0.0.0.3 area 0 - network 192.168.0.3 0.0.0.0 area 0 -! -router bgp 1 - bgp router-id 192.168.0.3 - bgp log-neighbor-changes - neighbor 192.168.0.2 remote-as 1 - neighbor 192.168.0.2 description iBGP peer iosv-1 - neighbor 192.168.0.2 update-source Loopback0 - ! - address-family ipv4 - network 192.168.0.3 mask 255.255.255.255 - neighbor 192.168.0.2 activate - exit-address-family -! -ip forward-protocol nd -! -! -no ip http server -no ip http secure-server -ip route 10.0.0.5 255.255.255.255 10.0.0.10 -! -! -! -! -control-plane -! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh -! -no scheduler allocate -! -end</entry> - <entry key="AutoNetkit.mgmt_ip" type="string"></entry> - </extensions> - <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" netPrefixLenV4="30"/> - </node> - <node name="vpp-1" type="SIMPLE" subtype="vPP" location="561,217"> - <extensions> - <entry key="config" type="string">#cloud-config -bootcmd: -- ln -s -t /etc/rc.d /etc/rc.local -hostname: vpp-1 -manage_etc_hosts: true -runcmd: -- start ttyS0 -- systemctl start getty@ttyS0.service -- systemctl start rc-local -- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config -- echo "UseDNS no" >> /etc/ssh/sshd_config -- service ssh restart -- service sshd restart -- sed -i 's/no-pci//' /cisco/etc/qn.conf -- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf -users: -- default -- gecos: User configured by VIRL Configuration Engine 0.15.3 - lock-passwd: false - name: cisco - plain-text-passwd: cisco - shell: /bin/bash - ssh-authorized-keys: - - VIRL-USER-SSH-PUBLIC-KEY - sudo: ALL=(ALL) ALL -write_files: -- path: /etc/init/ttyS0.conf - owner: root:root - content: | - # ttyS0 - getty - # This service maintains a getty on ttyS0 from the point the system is - # started until it is shut down again. - start on stopped rc or RUNLEVEL=[12345] - stop on runlevel [!12345] - respawn - exec /sbin/getty -L 115200 ttyS0 vt102 - permissions: '0644' -- path: /etc/systemd/system/dhclient@.service - content: | - [Unit] - Description=Run dhclient on %i interface - After=network.target - [Service] - Type=oneshot - ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease - RemainAfterExit=yes - owner: root:root - permissions: '0644' -- path: /cisco/etc/vpp-server.conf - owner: root:root - permissions: '0644' - content: |- - set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 - set interface state GigabitEthernet0/4/0 up - set interface ip address GigabitEthernet0/5/0 10.0.0.10/30 - set interface state GigabitEthernet0/5/0 up -</entry> - </extensions> - <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/> - <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" netPrefixLenV4="30"/> - </node> - <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/> - <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[2]"/> -</topology> |