diff options
Diffstat (limited to 'vnet/etc/scripts/virl/simple.virl')
| -rw-r--r-- | vnet/etc/scripts/virl/simple.virl | 389 |
1 files changed, 389 insertions, 0 deletions
diff --git a/vnet/etc/scripts/virl/simple.virl b/vnet/etc/scripts/virl/simple.virl new file mode 100644 index 00000000000..6033c42c36a --- /dev/null +++ b/vnet/etc/scripts/virl/simple.virl @@ -0,0 +1,389 @@ +<?xml version="1.0" encoding="UTF-8" standalone="yes"?> +<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd"> + <extensions> + <entry key="management_network" type="String">flat</entry> + </extensions> + <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="427,219" ipv4="192.168.0.2"> + <extensions> + <entry key="config" type="string">! +! Last configuration change at 14:27:32 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-1 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.2 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.167 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-1 + ip address 10.0.0.5 255.255.255.252 + ip ospf cost 1 + duplex auto + speed auto + media-type rj45 +! +router ospf 1 + passive-interface Loopback0 + network 10.0.0.4 0.0.0.3 area 0 + network 192.168.0.2 0.0.0.0 area 0 +! +router bgp 1 + bgp router-id 192.168.0.2 + bgp log-neighbor-changes + neighbor 192.168.0.3 remote-as 1 + neighbor 192.168.0.3 description iBGP peer iosv-2 + neighbor 192.168.0.3 update-source Loopback0 + ! + address-family ipv4 + network 192.168.0.2 mask 255.255.255.255 + neighbor 192.168.0.3 activate + exit-address-family +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +ip route 10.0.0.9 255.255.255.255 10.0.0.6 +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end</entry> + <entry key="AutoNetkit.mgmt_ip" type="string"></entry> + </extensions> + <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/> + </node> + <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="704,221" ipv4="192.168.0.3"> + <extensions> + <entry key="config" type="string">! +! Last configuration change at 14:26:58 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-2 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.3 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.164 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-1 + ip address 10.0.0.9 255.255.255.252 + ip ospf cost 1 + duplex auto + speed auto + media-type rj45 +! +router ospf 1 + passive-interface Loopback0 + network 10.0.0.8 0.0.0.3 area 0 + network 192.168.0.3 0.0.0.0 area 0 +! +router bgp 1 + bgp router-id 192.168.0.3 + bgp log-neighbor-changes + neighbor 192.168.0.2 remote-as 1 + neighbor 192.168.0.2 description iBGP peer iosv-1 + neighbor 192.168.0.2 update-source Loopback0 + ! + address-family ipv4 + network 192.168.0.3 mask 255.255.255.255 + neighbor 192.168.0.2 activate + exit-address-family +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +ip route 10.0.0.5 255.255.255.255 10.0.0.10 +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end</entry> + <entry key="AutoNetkit.mgmt_ip" type="string"></entry> + </extensions> + <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" netPrefixLenV4="30"/> + </node> + <node name="vpp-1" type="SIMPLE" subtype="vPP" location="561,217"> + <extensions> + <entry key="config" type="string">#cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-1 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.10/30 + set interface state GigabitEthernet0/5/0 up +</entry> + </extensions> + <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/> + <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" netPrefixLenV4="30"/> + </node> + <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/> + <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[2]"/> +</topology> |