diff options
Diffstat (limited to 'vnet/etc/scripts')
77 files changed, 0 insertions, 3645 deletions
diff --git a/vnet/etc/scripts/arp4 b/vnet/etc/scripts/arp4 deleted file mode 100644 index acb20da33c8..00000000000 --- a/vnet/etc/scripts/arp4 +++ /dev/null @@ -1,21 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.0.0.2 - ICMP echo_request - incrementing 100 - } -} - -trace add pg-input 100 -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 1.0.0.1/24 -set int ip address loop1 2.0.0.1/24 diff --git a/vnet/etc/scripts/arp4-mpls b/vnet/etc/scripts/arp4-mpls deleted file mode 100644 index d3d39f3b921..00000000000 --- a/vnet/etc/scripts/arp4-mpls +++ /dev/null @@ -1,24 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.2.2.2 - ICMP echo_request - incrementing 100 - } -} - -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 1.0.0.1/24 -set int ip address loop1 2.0.0.1/24 - -ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 - -trace add pg-input 100 diff --git a/vnet/etc/scripts/arp6 b/vnet/etc/scripts/arp6 deleted file mode 100644 index e6a98935309..00000000000 --- a/vnet/etc/scripts/arp6 +++ /dev/null @@ -1,21 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip6-input - size 64-64 - no-recycle - data { - ICMP6: 2000::2 -> 2001::2 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 2000::1/64 -set int ip address loop1 2001::1/64 diff --git a/vnet/etc/scripts/bvi b/vnet/etc/scripts/bvi deleted file mode 100644 index 2174da0db63..00000000000 --- a/vnet/etc/scripts/bvi +++ /dev/null @@ -1,76 +0,0 @@ - - -set int state tuntap-0 down -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 - -set int state GigabitEthernet2/1/0 up -cre sub GigabitEthernet2/1/0 1 dot1q 7 -set int state GigabitEthernet2/1/0.1 up - -set int state GigabitEthernet2/2/0 up -cre sub GigabitEthernet2/2/0 1 dot1q 9 -set int state GigabitEthernet2/2/0.1 up - - -loop create -set int l2 bridge loop0 0 bvi -set int ip table loop0 0 -set int state loop0 up - - -set int l2 bridge GigabitEthernet2/1/0.1 0 -set int l2 bridge GigabitEthernet2/2/0.1 0 - -set int l2 tag-rewrite GigabitEthernet2/1/0.1 pop 1 -set int l2 tag-rewrite GigabitEthernet2/2/0.1 pop 1 - -l2fib add 00:22:44:06:08:0a 0 GigabitEthernet2/1/0.1 static -l2fib add 00:02:04:06:08:0a 0 GigabitEthernet2/2/0.1 static - - -ip route table 0 8.0.0.1/32 via loop0 -set ip arp loop0 8.0.0.1 00:02:04:06:08:0a - - -ip route add 1.2.3.3/32 via GigabitEthernet2/1/0 IP4: 00:15:17:61:73:47 -> 00:15:17:61:73:46 - -cle er -cle int -cle run - -packet-generator new { - name bvi_to_l2 - limit 100 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 0050.56b7.296d - GRE: 1.2.3.3 -> 8.0.0.1 mpls_unicast - } -} - -packet-generator new { - name l2_to_bvi - limit 50 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0 - data { - IP4: 0050.56b7.7c83 -> dead.0000.0000 vlan 9 - GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast - } -} - -packet-generator new { - name l2_to_bvi_via_flood - limit 25 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0 - data { - IP4: 0050.56b7.7c83 -> ffff.ffff.ffff vlan 9 - GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast - } -} - diff --git a/vnet/etc/scripts/dhcp/dhcpd.conf b/vnet/etc/scripts/dhcp/dhcpd.conf deleted file mode 100644 index d4cb3ed718a..00000000000 --- a/vnet/etc/scripts/dhcp/dhcpd.conf +++ /dev/null @@ -1,8 +0,0 @@ -# add at the bottom - -subnet 192.168.0.0 netmask 255.255.0.0 { - range 192.168.1.10 192.168.1.254; - option routers 192.168.1.1; - default-lease-time 15; - max-lease-time 15; -} diff --git a/vnet/etc/scripts/dhcp/left-ping-target.sh b/vnet/etc/scripts/dhcp/left-ping-target.sh deleted file mode 100644 index 2edc2a50eaa..00000000000 --- a/vnet/etc/scripts/dhcp/left-ping-target.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash - -# to obtain dhcp address from leftpeer -dhclient -d -v eth1 diff --git a/vnet/etc/scripts/dhcp/leftpeer.conf b/vnet/etc/scripts/dhcp/leftpeer.conf deleted file mode 100644 index 458eecf0caf..00000000000 --- a/vnet/etc/scripts/dhcp/leftpeer.conf +++ /dev/null @@ -1,17 +0,0 @@ -set int ip table GigabitEthernet2/2/0 12 -set int ip address GigabitEthernet2/2/0 192.168.1.1/24 -set int state GigabitEthernet2/2/0 up - -set int ip table GigabitEthernet2/7/0 11 -set int ip address GigabitEthernet2/7/0 192.168.2.1/24 -set int state GigabitEthernet2/7/0 up - -comment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } - -comment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } - -ip route add 0.0.0.0/24 table 11 via local -ip route add 255.255.255.255/24 table 11 via local - -ip route add 0.0.0.0/24 table 12 via local -ip route add 255.255.255.255/24 table 12 via local diff --git a/vnet/etc/scripts/icmp b/vnet/etc/scripts/icmp deleted file mode 100644 index 1e054e2df4a..00000000000 --- a/vnet/etc/scripts/icmp +++ /dev/null @@ -1,16 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.2.3.4 -> 5.6.7.8 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 -ip route 5.6.7.8/32 via local -ip route 1.2.3.4/32 via local diff --git a/vnet/etc/scripts/icmp6 b/vnet/etc/scripts/icmp6 deleted file mode 100644 index 2a65acba256..00000000000 --- a/vnet/etc/scripts/icmp6 +++ /dev/null @@ -1,16 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip6-input - size 64-64 - no-recycle - data { - ICMP6: ::1 -> ::2 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 -ip route ::1/128 via local -ip route ::2/128 via local diff --git a/vnet/etc/scripts/ige b/vnet/etc/scripts/ige deleted file mode 100644 index 80d045af36d..00000000000 --- a/vnet/etc/scripts/ige +++ /dev/null @@ -1,19 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-lookup - size 50-50 - data { - ICMP: 1.0.0.1 -> 1.0.0.3 ttl 1 - incrementing 30 - } -} - -comment { tr add pg-input 100 } -set int ip address GigabitEthernet4/0/0 1.0.0.1/24 -set int ip address GigabitEthernet4/0/1 1.0.0.2/24 -set int state GigabitEthernet4/0/0 up -set int state GigabitEthernet4/0/1 up - -ip route add 1.0.0.3/32 via GigabitEthernet4/0/1 IP4: 00:15:17:61:73:47 -> 00:15:17:61:73:46 -tr add ige-input 10 diff --git a/vnet/etc/scripts/ip6 b/vnet/etc/scripts/ip6 deleted file mode 100644 index 4f9f3ee5474..00000000000 --- a/vnet/etc/scripts/ip6 +++ /dev/null @@ -1,15 +0,0 @@ -packet-generator new { - name x - limit 1 - node ethernet-input - size 64-64 - no-recycle - data { - IP6: 1.2.3 -> 4.5.6 - ICMP: ::1 -> ::2 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 diff --git a/vnet/etc/scripts/ip6-hbh b/vnet/etc/scripts/ip6-hbh deleted file mode 100644 index 0c6de47f100..00000000000 --- a/vnet/etc/scripts/ip6-hbh +++ /dev/null @@ -1,84 +0,0 @@ -tap connect tap0 -set int state tap-0 up -set int ip address tap-0 1::1/64 -packet-generator new { - name hbh1 - limit 1 - node ip6-input - size 48-48 - no-recycle - data { - IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 - hex 0x3B00010403040506 - incrementing 100 - } -} -packet-generator new { - name hbh2 - limit 1 - node ip6-input - size 48-48 - no-recycle - data { - IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 - hex 0x3B00C10403040506 - incrementing 100 - } -} - -packet-generator new { - name hbh3 - limit 1 - node ip6-input - size 48-48 - no-recycle - data { - IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 - hex 0x3BffC10403040506 - incrementing 100 - } -} - -packet-generator new { - name hbh4 - limit 1 - node ip6-input - size 64-64 - no-recycle - data { - IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 - hex 0x3BffC10403040506 - incrementing 100 - } -} - -packet-generator new { - name hbh5 - limit 1 - node ip6-input - size 56-56 - no-recycle - data { - IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 - length 16 - hex 0x3B010104030405060106030405060708 - incrementing 100 - } -} - -packet-generator new { - name hbh6 - limit 1 - node ip6-input - size 56-56 - no-recycle - data { - IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 - length 16 - hex 0x3a00050200000100 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 diff --git a/vnet/etc/scripts/ixge b/vnet/etc/scripts/ixge deleted file mode 100644 index 6722b5369cd..00000000000 --- a/vnet/etc/scripts/ixge +++ /dev/null @@ -1,15 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-lookup - size 50-50 - data { - ICMP: 1.0.0.1 -> 1.0.0.3 ttl 1 - incrementing 30 - } -} - -comment { tr add pg-input 100 } -set int ip address TenGigabitEthernet5/0/0 33.0.1.1/8 -set int state TenGigabitEthernet5/0/0 up - diff --git a/vnet/etc/scripts/l2efpfilter b/vnet/etc/scripts/l2efpfilter deleted file mode 100644 index 307b4436e81..00000000000 --- a/vnet/etc/scripts/l2efpfilter +++ /dev/null @@ -1,83 +0,0 @@ - -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 -set int state GigabitEthernet2/1/0 up -set int state tuntap-0 down - - -cre sub GigabitEthernet2/1/0 1 dot1q 1 -cre sub GigabitEthernet2/1/0 2 dot1q 2 -cre sub GigabitEthernet2/1/0 3 dot1q 3 -cre sub GigabitEthernet2/2/0 1 dot1q 1 -cre sub GigabitEthernet2/2/0 100 dot1q 100 - -set int l2 bridge GigabitEthernet2/1/0 0 -set int l2 bridge GigabitEthernet2/1/0.1 0 -set int l2 bridge GigabitEthernet2/1/0.2 0 -set int l2 bridge GigabitEthernet2/1/0.3 0 -set int l2 bridge GigabitEthernet2/2/0 0 -set int l2 bridge GigabitEthernet2/2/0.1 0 -set int l2 bridge GigabitEthernet2/2/0.100 0 - -set int l2 tag-rewrite GigabitEthernet2/2/0.1 push dot1q 50 -set int l2 tag-rewrite GigabitEthernet2/1/0.2 translate 1-1 dot1q 100 -set int l2 tag-rewrite GigabitEthernet2/1/0.3 translate 1-1 dot1q 99 - -set int l2 efp-filter GigabitEthernet2/2/0 -set int l2 efp-filter GigabitEthernet2/2/0.1 -set int l2 efp-filter GigabitEthernet2/2/0.100 - - -l2fib add 00:00:00:00:00:11 0 GigabitEthernet2/2/0.1 static -l2fib add 00:00:00:00:00:22 0 GigabitEthernet2/2/0.100 static - -set int state GigabitEthernet2/1/0 up -set int state GigabitEthernet2/1/0.1 up -set int state GigabitEthernet2/1/0.2 up -set int state GigabitEthernet2/1/0.3 up -set int state GigabitEthernet2/2/0 up -set int state GigabitEthernet2/2/0.1 up -set int state GigabitEthernet2/2/0.100 up - - -trace add pg-input 6 - -clear error -clear run -clear int - -packet-generator new { - name pre_vtr_fail - limit 10 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 00:00:00:00:00:11 vlan 1 - GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast - } -} - -packet-generator new { - name post_vtr_pass - limit 20 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 2 - GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast - } -} - -packet-generator new { - name post_vtr_fail - limit 50 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 3 - GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast - } -} - diff --git a/vnet/etc/scripts/l2efpfilter_perf b/vnet/etc/scripts/l2efpfilter_perf deleted file mode 100644 index b2f4b490cb8..00000000000 --- a/vnet/etc/scripts/l2efpfilter_perf +++ /dev/null @@ -1,58 +0,0 @@ - -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 -set int state GigabitEthernet2/1/0 up -set int state tuntap-0 down - - -cre sub GigabitEthernet2/1/0 1 dot1q 1 -cre sub GigabitEthernet2/1/0 2 dot1q 2 -cre sub GigabitEthernet2/1/0 3 dot1q 3 -cre sub GigabitEthernet2/2/0 1 dot1q 1 -cre sub GigabitEthernet2/2/0 100 dot1q 100 - -set int l2 bridge GigabitEthernet2/1/0 0 -set int l2 bridge GigabitEthernet2/1/0.1 0 -set int l2 bridge GigabitEthernet2/1/0.2 0 -set int l2 bridge GigabitEthernet2/1/0.3 0 -set int l2 bridge GigabitEthernet2/2/0 0 -set int l2 bridge GigabitEthernet2/2/0.1 0 -set int l2 bridge GigabitEthernet2/2/0.100 0 - -set int l2 tag-rewrite GigabitEthernet2/2/0.1 push dot1q 50 -set int l2 tag-rewrite GigabitEthernet2/1/0.2 translate 1-1 dot1q 100 -set int l2 tag-rewrite GigabitEthernet2/1/0.3 translate 1-1 dot1q 99 - -set int l2 efp-filter GigabitEthernet2/2/0 -set int l2 efp-filter GigabitEthernet2/2/0.1 -set int l2 efp-filter GigabitEthernet2/2/0.100 - - -l2fib add 00:00:00:00:00:11 0 GigabitEthernet2/2/0.1 static -l2fib add 00:00:00:00:00:22 0 GigabitEthernet2/2/0.100 static - -set int state GigabitEthernet2/1/0 up -set int state GigabitEthernet2/1/0.1 up -set int state GigabitEthernet2/1/0.2 up -set int state GigabitEthernet2/1/0.3 up -set int state GigabitEthernet2/2/0 up -set int state GigabitEthernet2/2/0.1 up -set int state GigabitEthernet2/2/0.100 up - - -trace add pg-input 6 - -clear error -clear run -clear int - -packet-generator new { - name post_vtr_pass - limit 9111003 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 2 - GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast - } -} diff --git a/vnet/etc/scripts/l2fib b/vnet/etc/scripts/l2fib deleted file mode 100644 index 81ede171ef2..00000000000 --- a/vnet/etc/scripts/l2fib +++ /dev/null @@ -1,46 +0,0 @@ - -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 -set int state GigabitEthernet2/1/0 up - -set int state GigabitEthernet2/2/0 up -cre sub GigabitEthernet2/2/0 1 dot1q 9 -set int state GigabitEthernet2/2/0.1 up -set int state tuntap-0 down - -set int acl input GigabitEthernet2/1/0 -set int acl output GigabitEthernet2/1/0 -set int acl input GigabitEthernet2/2/0.1 -set int acl output GigabitEthernet2/2/0.1 - -set int l2 bridge GigabitEthernet2/1/0 0 -set int l2 bridge GigabitEthernet2/2/0.1 0 - -set int l2 tag-rewrite GigabitEthernet2/1/0 push dot1q 50 -set int l2 tag-rewrite GigabitEthernet2/2/0.1 pop 1 - - -trace add pg-input 6 - -clear error -clear run -clear int - -packet-generator new { - name new_input_if_index_mac_move - limit 4 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - size 98-98 - data { hex 0x00010203040500020406080a080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } -} - -packet-generator new { - name dmac_hit - limit 7 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0 - size 98-98 - data { hex 0x00020406080a00224406080a8100000981000011080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } -} diff --git a/vnet/etc/scripts/l2fib_perf b/vnet/etc/scripts/l2fib_perf deleted file mode 100644 index 638317ff705..00000000000 --- a/vnet/etc/scripts/l2fib_perf +++ /dev/null @@ -1,29 +0,0 @@ - -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 -set int state GigabitEthernet2/1/0 up - -set int state GigabitEthernet2/2/0 up -cre sub GigabitEthernet2/2/0 1 dot1q 9 -set int state GigabitEthernet2/2/0.1 up -set int state tuntap-0 down - -set int l2 bridge GigabitEthernet2/1/0 0 -set int l2 bridge GigabitEthernet2/2/0.1 0 - -l2fib add 00:22:44:06:08:0a 0 GigabitEthernet2/1/0 static -l2fib add 00:02:04:06:08:0a 0 GigabitEthernet2/2/0.1 static - -cle er -cle int -cle run - -packet-generator new { - name perf - limit 9111003 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0.1 - size 98-98 - data { hex 0x00224406080a00020406080a81000009080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } -} - diff --git a/vnet/etc/scripts/l2fib_xc b/vnet/etc/scripts/l2fib_xc deleted file mode 100644 index 35d7342b3f7..00000000000 --- a/vnet/etc/scripts/l2fib_xc +++ /dev/null @@ -1,31 +0,0 @@ - -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 -set int state GigabitEthernet2/1/0 up - -set int state GigabitEthernet2/2/0 up -cre sub GigabitEthernet2/2/0 1 dot1q 9 -set int state GigabitEthernet2/2/0.1 up -set int state tuntap-0 down - -set int acl input GigabitEthernet2/1/0 -set int acl output GigabitEthernet2/1/0 -set int acl input GigabitEthernet2/2/0.1 -set int acl output GigabitEthernet2/2/0.1 - -set int l2 xc GigabitEthernet2/1/0 GigabitEthernet2/2/0.1 -set int l2 xc GigabitEthernet2/2/0.1 GigabitEthernet2/1/0 - -clear error -clear run -clear int - -packet-generator new { - name xc - limit 11 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - size 98-98 - data { hex 0x00010203040500020406080a080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } -} - diff --git a/vnet/etc/scripts/l2flood b/vnet/etc/scripts/l2flood deleted file mode 100644 index 013462cef64..00000000000 --- a/vnet/etc/scripts/l2flood +++ /dev/null @@ -1,42 +0,0 @@ - -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 -set int state GigabitEthernet2/1/0 up -set int state tuntap-0 down - - -loop create -cre sub loop0 1 dot1q 1 -cre sub loop0 2 dot1q 2 -cre sub loop0 3 dot1q 3 -cre sub GigabitEthernet2/1/0 1 dot1q 1 - - -set int l2 bridge loop0.1 7 -set int l2 bridge loop0.2 7 -set int l2 bridge loop0.3 7 -set int l2 bridge GigabitEthernet2/1/0.1 7 - -loop cre -set int l2 bridge loop1 7 bvi - -set int state GigabitEthernet2/1/0.1 up - -trace add pg-input 6 - -clear error -clear run -clear int - -packet-generator new { - name flood - limit 1 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> ffff.ffff.ffff vlan 1 - GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast - } - -} - diff --git a/vnet/etc/scripts/l2tp b/vnet/etc/scripts/l2tp deleted file mode 100644 index 337805aa44c..00000000000 --- a/vnet/etc/scripts/l2tp +++ /dev/null @@ -1,134 +0,0 @@ - -set int ip address GigabitEthernet2/1/0 1.2.3.4/24 -set int state GigabitEthernet2/1/0 up -set int state tuntap-0 down - - -cre sub GigabitEthernet2/1/0 1 dot1q 1 -cre sub GigabitEthernet2/1/0 2 dot1q 2 -cre sub GigabitEthernet2/1/0 3 dot1q 3 -cre sub GigabitEthernet2/2/0 1 dot1q 1 -cre sub GigabitEthernet2/2/0 100 dot1q 100 - - -set int l2 tag-rewrite GigabitEthernet2/1/0.1 pop 1 -set int l2 tag-rewrite GigabitEthernet2/1/0.2 pop 1 - - -l2tp session add client 11::1 our 22::2 l2-interface GigabitEthernet2/1/0.1 -l2tp session add client 11::1 our 22::3 l2-interface GigabitEthernet2/1/0.2 local-session-id 2 l2-sublayer-present - -ip route 11::1/128 via GigabitEthernet2/2/0 -set ip6 neighbor GigabitEthernet2/2/0 11::1 00:02:04:06:08:0a - -enable ip6 interface GigabitEthernet2/2/0 - -set int ip6 l2tpv3 GigabitEthernet2/2/0 - -set int state GigabitEthernet2/1/0 up -set int state GigabitEthernet2/1/0.1 up -set int state GigabitEthernet2/1/0.2 up -set int state GigabitEthernet2/1/0.3 up -set int state GigabitEthernet2/2/0 up - - -trace add pg-input 2 - -clear error -clear run -clear int - -packet-generator new { - name decap - limit 10 - size 200-200 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0 - data { - IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a - L2TP: 11::1 -> 22::2 - L2TP: session_id 1 cookie 0xffffffffffffffff - IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 - UDP: 1.2.3.4 -> 5.6.7.8 - incrementing 8 - } -} - -packet-generator new { - name decap_bad_sid - limit 30 - size 200-200 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0 - data { - IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a - L2TP: 11::1 -> 22::2 - L2TP: session_id 0x999 cookie 0xffffffffffffffff - IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 - UDP: 1.2.3.4 -> 5.6.7.8 - incrementing 8 - } -} - -packet-generator new { - name decap_bad_cookie - limit 50 - size 200-200 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0 - data { - IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a - L2TP: 11::1 -> 22::2 - L2TP: session_id 1 cookie 0x3333ffffffffffff - IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 - UDP: 1.2.3.4 -> 5.6.7.8 - incrementing 8 - } -} - -packet-generator new { - name encap - limit 100 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0000.5555.0002 -> 00:00:dd:dd:00:02 vlan 1 - UDP: 1.2.3.4 -> 5.6.7.8 - incrementing 8 - } -} - -packet-generator new { - name decap_sublayer - limit 300 - size 200-200 - no-recycle - node ethernet-input - interface GigabitEthernet2/2/0 - data { - IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a - L2TP: 11::1 -> 22::3 - L2TP: session_id 2 cookie 0xffffffffffffffff l2_sublayer 0 - IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 - UDP: 1.2.3.4 -> 5.6.7.8 - incrementing 8 - } -} - -packet-generator new { - name encap_sublayer - limit 700 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0000.5555.0002 -> 00:00:dd:dd:00:02 vlan 2 - UDP: 1.2.3.4 -> 5.6.7.8 - incrementing 8 - } -} - diff --git a/vnet/etc/scripts/leftpeer/leftpeer-classify b/vnet/etc/scripts/leftpeer/leftpeer-classify deleted file mode 100755 index 74285912aeb..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-classify +++ /dev/null @@ -1,8 +0,0 @@ -classify table mask l2 src l3 ip4 src buckets 2 miss-next local - -comment { classify table mask l3 ip4 src buckets 2 miss-next local } -set ip classify intfc GigabitEthernet2/2/0 table-index 0 -set int ip address GigabitEthernet2/2/0 192.168.1.1/24 -set int state GigabitEthernet2/2/0 up - -classify session hit-next local table-index 0 match l2 src 00:50:56:b7:05:bb l3 ip4 src 192.168.1.2 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-classify6 b/vnet/etc/scripts/leftpeer/leftpeer-classify6 deleted file mode 100644 index 6579d50d3c5..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-classify6 +++ /dev/null @@ -1,5 +0,0 @@ -classify table mask l3 ip6 src buckets 2 miss-next local -set ip6 classify intfc GigabitEthernet2/2/0 table-index 0 -set int ip address GigabitEthernet2/2/0 db01::1/64 -set int state GigabitEthernet2/2/0 up -classify session hit-next local table-index 0 match l3 ip6 src db01::2 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-classifyl2 b/vnet/etc/scripts/leftpeer/leftpeer-classifyl2 deleted file mode 100644 index 6be4b1e52cf..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-classifyl2 +++ /dev/null @@ -1,8 +0,0 @@ -set int ip address GigabitEthernet2/2/0 192.168.1.1/24 -set int state GigabitEthernet2/2/0 up - -classify table mask l3 ip4 src buckets 2 l2-miss-next ethernet - -classify session advance 14 l2-hit-next ip4 table-index 0 match l3 ip4 src 192.168.1.2 - -set int l2 class intfc GigabitEthernet2/2/0 ip4-table 0 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-dhcp b/vnet/etc/scripts/leftpeer/leftpeer-dhcp deleted file mode 100644 index c13a8f3aa5e..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-dhcp +++ /dev/null @@ -1,23 +0,0 @@ -loop cre -set int ip table loop0 12 -set int ip address loop0 192.168.1.1/24 -set int state loop0 up - -set int ip table GigabitEthernet2/2/0 12 -comment { set int ip address GigabitEthernet2/2/0 192.168.1.1/24 } -set int unnumbered GigabitEthernet2/2/0 use loop0 -set int state GigabitEthernet2/2/0 up - -set int ip table GigabitEthernet2/7/0 11 -set int ip address GigabitEthernet2/7/0 192.168.2.1/24 -set int state GigabitEthernet2/7/0 up - -uncomment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } - -uncomment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } - -ip route add 0.0.0.0/24 table 11 via local -ip route add 255.255.255.255/24 table 11 via local - -ip route add 0.0.0.0/24 table 12 via local -ip route add 255.255.255.255/24 table 12 via local diff --git a/vnet/etc/scripts/leftpeer/leftpeer-ioam.conf b/vnet/etc/scripts/leftpeer/leftpeer-ioam.conf deleted file mode 100644 index 6c1b502c2f7..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-ioam.conf +++ /dev/null @@ -1,15 +0,0 @@ -comment { connects to linux ping source eth1 addr db02::2/64 } -set int ip address GigabitEthernet2/2/0 db02::1/64 -set int state GigabitEthernet2/2/0 up - -comment { connects to ioam domain rightpeer eth2 addr db03::3/64 } -set int ip address GigabitEthernet2/3/0 db03::1/64 -set int state GigabitEthernet2/3/0 up - -ioam set rewrite trace-elts 2 pow - -set ip6 neighbor GigabitEthernet2/3/0 db03::3 00:50:56:b7:05:cb - -ip route add db04::0/64 via db03::3 - -ioam set destination db04::0/64 add diff --git a/vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf b/vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf deleted file mode 100644 index a75f9b4c8ae..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-l3vxlan.conf +++ /dev/null @@ -1,12 +0,0 @@ -comment { tunnel to rightpeer 6.0.3.3 on vlan 101 } - -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -vxlan tunnel src 6.0.3.1 peer 6.0.3.3 vni 123 adj 6.0.4.4/24 - diff --git a/vnet/etc/scripts/leftpeer/leftpeer-lisp.conf b/vnet/etc/scripts/leftpeer/leftpeer-lisp.conf deleted file mode 100644 index cb3180b711d..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-lisp.conf +++ /dev/null @@ -1,18 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to rightpeer on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 -set int ip address lisp_gpe_tunnel0 6.0.4.1/24 -set int state lisp_gpe_tunnel0 up - -lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 -set int stat lisp_gpe_tunnel1 up diff --git a/vnet/etc/scripts/leftpeer/leftpeer-mpls.conf b/vnet/etc/scripts/leftpeer/leftpeer-mpls.conf deleted file mode 100644 index 74bce81b190..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-mpls.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface on vlan 100 } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip table GigabitEthernet2/2/0 1 -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to rightpeer on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.3 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-sr.conf b/vnet/etc/scripts/leftpeer/leftpeer-sr.conf deleted file mode 100644 index a7b962d3aba..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-sr.conf +++ /dev/null @@ -1,24 +0,0 @@ -comment { test sr segment chunk-offset on } -test sr hmac validate on - -comment { trunk to rightpeer } -set int ip address GigabitEthernet2/3/0 db03::2/64 -enable ip6 interface GigabitEthernet2/3/0 -set int state GigabitEthernet2/3/0 up - -comment { subscriber linux-ping-source } -set int ip address GigabitEthernet2/2/0 db02::2/64 -enable ip6 interface GigabitEthernet2/2/0 -set int state GigabitEthernet2/2/0 up - -sr hmac id 2 key Gozzer -sr hmac id 3 key Hoser - -sr tunnel src db01::1 dst db04::1/128 next db03::1 next db04::1 tag db02::2 clean key Gozzer InPE 1 - -tap connect srlocal hwaddr random -set int ip6 table tap-0 1 -set int ip address tap-0 db04::99/64 -enable ip6 interface tap-0 -set int state tap-0 up -ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf b/vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf deleted file mode 100644 index d50e8bf49f3..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer-vxlan.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { tunnel to rightpeer 6.0.3.3 on vlan 101 } - -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -comment { tunnel to thirdpeer 6.0.5.5 on vlan 105 } -set int ip address GigabitEthernet2/7/0 6.0.5.1/24 -set int state GigabitEthernet2/7/0 up - -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -vxlan tunnel src 6.0.3.1 peer 6.0.3.3 peer 6.0.3.5 vni 123 -vxlan l2 GigabitEthernet2/2/0 vni 123 - diff --git a/vnet/etc/scripts/leftpeer/leftpeer.script b/vnet/etc/scripts/leftpeer/leftpeer.script deleted file mode 100644 index f08c809012c..00000000000 --- a/vnet/etc/scripts/leftpeer/leftpeer.script +++ /dev/null @@ -1,9 +0,0 @@ -l2tp_set_lookup_key lookup_v6_src - -sw_interface_add_del_address GigabitEthernet2/3/0 db03::2/64 -sw_interface_set_flags GigabitEthernet2/3/0 admin-up - -comment sw_interface_add_del_address GigabitEthernet2/2/0 db02::2/64 -sw_interface_set_flags GigabitEthernet2/2/0 admin-up - -l2tp_session_add_del client_address db03::1 our_address db03::2 GigabitEthernet2/2/0 local_session_id 1 remote_session_id 3 local_cookie 11 remote_cookie 33 diff --git a/vnet/etc/scripts/lfib/ip4-to-mpls b/vnet/etc/scripts/lfib/ip4-to-mpls deleted file mode 100644 index 85753797751..00000000000 --- a/vnet/etc/scripts/lfib/ip4-to-mpls +++ /dev/null @@ -1,26 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.2.2.2 - ICMP echo_request - incrementing 100 - } -} - -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 1.0.0.1/24 -set int ip address loop1 2.0.0.1/24 - -set ip arp static loop1 2.0.0.2 dead.beef.babe -set int mpls loop1 enable -ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 - -trace add pg-input 100 diff --git a/vnet/etc/scripts/lfib/mpls-pop-to-mpls b/vnet/etc/scripts/lfib/mpls-pop-to-mpls deleted file mode 100644 index 2818ac133e1..00000000000 --- a/vnet/etc/scripts/lfib/mpls-pop-to-mpls +++ /dev/null @@ -1,28 +0,0 @@ -packet-generator new { - name x - limit 1 - node mpls-input - size 72-72 - no-recycle - data { - hex 0x0001e0ff0001f1ff4500004000000000400177ba010000020202020208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 - } -} - -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 1.0.0.1/24 -set int ip address loop1 2.0.0.1/24 - -set ip arp static loop1 2.0.0.2 dead.beef.babe -set int mpls loop1 enable - -ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 - -mpls local-label add 30 non-eos mpls-lookup-in-table 0 -mpls local-label add 31 2.2.2.2/32 - -trace add pg-input 100 diff --git a/vnet/etc/scripts/lfib/mpls-to-ip4 b/vnet/etc/scripts/lfib/mpls-to-ip4 deleted file mode 100644 index 24e235e01db..00000000000 --- a/vnet/etc/scripts/lfib/mpls-to-ip4 +++ /dev/null @@ -1,27 +0,0 @@ -packet-generator new { - name x - limit 1 - node mpls-input - size 68-68 - no-recycle - data { - hex 0x0001e1ff4500004000000000400177ba010000020202020208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 - } -} - -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 1.0.0.1/24 -set int ip address loop1 2.0.0.1/24 - -set ip arp static loop1 2.0.0.2 dead.beef.babe -set int mpls loop1 enable - -ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 - -mpls local-label add 30 eos ip4-lookup-in-table 0 - -trace add pg-input 100 diff --git a/vnet/etc/scripts/lfib/mpls-to-mpls b/vnet/etc/scripts/lfib/mpls-to-mpls deleted file mode 100644 index 497dbab324f..00000000000 --- a/vnet/etc/scripts/lfib/mpls-to-mpls +++ /dev/null @@ -1,26 +0,0 @@ -packet-generator new { - name x - limit 1 - node mpls-input - size 68-68 - no-recycle - data { - hex 0x0001e1ff4500004000000000400177ba010000020200000208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 - } -} - -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 1.0.0.1/24 -set int ip address loop1 2.0.0.1/24 - -set ip arp static loop1 2.0.0.2 dead.beef.babe -set int mpls loop1 enable - -ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 -mpls local-label add 30 2.2.2.2/32 - -trace add pg-input 100 diff --git a/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf b/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf deleted file mode 100644 index dd37b942062..00000000000 --- a/vnet/etc/scripts/mpls-o-ethernet/leftpeer.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase2 configuration } - -comment { local client facing interface } -comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } - -set int ip table GigabitEthernet2/2/0 1 -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to rightpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.4.1 -mpls decap add label 30 fib 1 - -create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 6.0.4.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/vnet/etc/scripts/mpls-o-ethernet/pg b/vnet/etc/scripts/mpls-o-ethernet/pg deleted file mode 100644 index ba5397f7648..00000000000 --- a/vnet/etc/scripts/mpls-o-ethernet/pg +++ /dev/null @@ -1,10 +0,0 @@ -packet-generator new { - name x - limit 1 - node mpls-ethernet-input - size 68-68 - no-recycle - data { - hex 0x0001e1ff4500004000000000400177ba010000020200000208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 - } -}
\ No newline at end of file diff --git a/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf b/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf deleted file mode 100644 index 7709ce4d584..00000000000 --- a/vnet/etc/scripts/mpls-o-ethernet/rightpeer.conf +++ /dev/null @@ -1,15 +0,0 @@ -comment { local client facing interface } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to leftpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.2.1 -mpls decap add label 30 fib 1 - -create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.2.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/vnet/etc/scripts/mpls-o-ethernet/single.conf b/vnet/etc/scripts/mpls-o-ethernet/single.conf deleted file mode 100644 index 2a25d35512c..00000000000 --- a/vnet/etc/scripts/mpls-o-ethernet/single.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { single node configuration } - -loop create -loop create -set int state loop0 up -set int state loop1 up - -set int ip address loop0 1.0.0.1/24 -set int ip address loop1 2.0.0.1/24 - - -ip route add 2.2.2.2/32 via 2.0.0.2 loop1 - -mpls encap add label 30 fib 0 dest 2.2.2.2 -mpls decap add label 30 fib 0 - -create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 2.2.2.2/32 tx-intfc loop1 fib-id 0 diff --git a/vnet/etc/scripts/mpls-o-gre/dhcpd.conf b/vnet/etc/scripts/mpls-o-gre/dhcpd.conf deleted file mode 100644 index f0f659cd55f..00000000000 --- a/vnet/etc/scripts/mpls-o-gre/dhcpd.conf +++ /dev/null @@ -1,116 +0,0 @@ -# -# Sample configuration file for ISC dhcpd for Debian -# -# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as -# configuration file instead of this file. -# -# - -# The ddns-updates-style parameter controls whether or not the server will -# attempt to do a DNS update when a lease is confirmed. We default to the -# behavior of the version 2 packages ('none', since DHCP v2 didn't -# have support for DDNS.) -ddns-update-style none; - -# option definitions common to all supported networks... -option domain-name "example.org"; -option domain-name-servers ns1.example.org, ns2.example.org; - -default-lease-time 600; -max-lease-time 7200; - -# If this DHCP server is the official DHCP server for the local -# network, the authoritative directive should be uncommented. -#authoritative; - -# Use this to send dhcp log messages to a different log file (you also -# have to hack syslog.conf to complete the redirection). -log-facility local7; - -# No service will be given on this subnet, but declaring it helps the -# DHCP server to understand the network topology. - -#subnet 10.152.187.0 netmask 255.255.255.0 { -#} - -# This is a very basic subnet declaration. - -#subnet 10.254.239.0 netmask 255.255.255.224 { -# range 10.254.239.10 10.254.239.20; -# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; -#} - -# This declaration allows BOOTP clients to get dynamic addresses, -# which we don't really recommend. - -#subnet 10.254.239.32 netmask 255.255.255.224 { -# range dynamic-bootp 10.254.239.40 10.254.239.60; -# option broadcast-address 10.254.239.31; -# option routers rtr-239-32-1.example.org; -#} - -# A slightly different configuration for an internal subnet. -#subnet 10.5.5.0 netmask 255.255.255.224 { -# range 10.5.5.26 10.5.5.30; -# option domain-name-servers ns1.internal.example.org; -# option domain-name "internal.example.org"; -# option routers 10.5.5.1; -# option broadcast-address 10.5.5.31; -# default-lease-time 600; -# max-lease-time 7200; -#} - -# Hosts which require special configuration options can be listed in -# host statements. If no address is specified, the address will be -# allocated dynamically (if possible), but the host-specific information -# will still come from the host declaration. - -#host passacaglia { -# hardware ethernet 0:0:c0:5d:bd:95; -# filename "vmunix.passacaglia"; -# server-name "toccata.fugue.com"; -#} - -# Fixed IP addresses can also be specified for hosts. These addresses -# should not also be listed as being available for dynamic assignment. -# Hosts for which fixed IP addresses have been specified can boot using -# BOOTP or DHCP. Hosts for which no fixed address is specified can only -# be booted with DHCP, unless there is an address range on the subnet -# to which a BOOTP client is connected which has the dynamic-bootp flag -# set. -#host fantasia { -# hardware ethernet 08:00:07:26:c0:a5; -# fixed-address fantasia.fugue.com; -#} - -# You can declare a class of clients and then do address allocation -# based on that. The example below shows a case where all clients -# in a certain class get addresses on the 10.17.224/24 subnet, and all -# other clients get addresses on the 10.0.29/24 subnet. - -#class "foo" { -# match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; -#} - -#shared-network 224-29 { -# subnet 10.17.224.0 netmask 255.255.255.0 { -# option routers rtr-224.example.org; -# } -# subnet 10.0.29.0 netmask 255.255.255.0 { -# option routers rtr-29.example.org; -# } -# pool { -# allow members of "foo"; -# range 10.17.224.10 10.17.224.250; -# } -# pool { -# deny members of "foo"; -# range 10.0.29.10 10.0.29.230; -# } -#} -subnet 6.0.0.0 netmask 255.255.0.0 { - range 6.0.2.2 6.0.2.5; - option routers 6.0.2.1; - default-lease-time 15; - max-lease-time 15; -} diff --git a/vnet/etc/scripts/mpls-o-gre/leftpeer.conf b/vnet/etc/scripts/mpls-o-gre/leftpeer.conf deleted file mode 100644 index 149c70c068d..00000000000 --- a/vnet/etc/scripts/mpls-o-gre/leftpeer.conf +++ /dev/null @@ -1,14 +0,0 @@ -comment { left linux ping target configure at e.g. 6.0.2.2/24 } - -set int ip table GigabitEthernet2/2/0 1 -set int ip address GigabitEthernet2/2/0 6.0.2.1/24 -set int state GigabitEthernet2/2/0 up - -comment { tunnel to rightpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.1/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.3 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/mpls-o-gre/rightpeer.conf b/vnet/etc/scripts/mpls-o-gre/rightpeer.conf deleted file mode 100644 index b5bb597db49..00000000000 --- a/vnet/etc/scripts/mpls-o-gre/rightpeer.conf +++ /dev/null @@ -1,14 +0,0 @@ -comment { right linux ping target configure e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to leftpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.1 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/mpls-tunnel b/vnet/etc/scripts/mpls-tunnel deleted file mode 100644 index d04b29702e7..00000000000 --- a/vnet/etc/scripts/mpls-tunnel +++ /dev/null @@ -1,87 +0,0 @@ -packet-generator new { - name x0 - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.0.0.2 - ICMP echo_request - incrementing 100 - } -} -packet-generator new { - name x1 - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.0.1.2 - ICMP echo_request - incrementing 100 - } -} -packet-generator new { - name x2 - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.0.2.2 - ICMP echo_request - incrementing 100 - } -} -packet-generator new { - name x3 - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.0.3.2 - ICMP echo_request - incrementing 100 - } -} - - - -trace add pg-input 100 - -loop create -set int state loop0 up - -set int ip address loop0 10.0.0.1/24 -set ip arp loop0 10.0.0.2 00:00:11:aa:bb:cc - -mpls tunnel add via 10.0.0.2 loop0 out-label 33 out-label 34 out-label 35 out-label 36 -set int state mpls-tunnel0 up -set int ip addr mpls-tunnel0 192.168.0.1/32 -ip route add 2.0.0.2/32 via 192.168.0.2 mpls-tunnel0 - - -mpls tunnel add via 10.0.0.2 out-label 33 -set int state mpls-tunnel1 up -set int ip addr mpls-tunnel1 192.168.1.1/32 -ip route add 2.0.1.2/32 via 192.168.1.2 mpls-tunnel1 out-label 99 - -mpls tunnel add via 10.0.0.2 loop0 out-label 3 -set int state mpls-tunnel2 up -set int ip addr mpls-tunnel2 192.168.2.1/32 -ip route add 2.0.2.2/32 via 192.168.2.2 mpls-tunnel2 - - -mpls tunnel add l2-only via 10.0.0.2 loop0 out-label 234 out-label 0 -set int state mpls-tunnel3 up -set int l2 bridge mpls-tunnel3 1 - -loop create -set int ip addr loop1 6.0.1.44/24 -set int l2 bridge loop1 1 bvi -set int l2 learn loop1 disable -set int state loop1 up - -ip route add 2.0.3.2/32 via 6.0.1.45 loop1 diff --git a/vnet/etc/scripts/pcap b/vnet/etc/scripts/pcap deleted file mode 100644 index 692e5f27012..00000000000 --- a/vnet/etc/scripts/pcap +++ /dev/null @@ -1,18 +0,0 @@ -packet-generator new { - name x - limit 1 - node ethernet-input - no-recycle - pcap /home/eliot/pcap-data/ISIS_level1_adjacency.cap -} - -packet-generator new { - name y - limit 1 - node hdlc-input - no-recycle - pcap /home/eliot/pcap-data/ISIS_p2p_adjacency.cap -} - -tr add pg-input 10 - diff --git a/vnet/etc/scripts/probe4 b/vnet/etc/scripts/probe4 deleted file mode 100644 index b530e0dbc1d..00000000000 --- a/vnet/etc/scripts/probe4 +++ /dev/null @@ -1,11 +0,0 @@ -ethernet create-interfaces -set int state fake-eth0 up -set int ip address fake-eth0 1.0.0.1/24 -comment { error } -comment { ip probe fake-eth0 1.0.0.1 } -comment { ip probe fake-eth0 1.2.3.4 } -comment { error } -comment { ip probe fake-eth0 1.0.0.2 } - - - diff --git a/vnet/etc/scripts/probe6 b/vnet/etc/scripts/probe6 deleted file mode 100644 index a5490c90b98..00000000000 --- a/vnet/etc/scripts/probe6 +++ /dev/null @@ -1,7 +0,0 @@ -ethernet create-interfaces -set int state fake-eth0 up -set int ip address fake-eth0 2000::1/64 -comment { ip probe fake-eth0 2000::1 } - - - diff --git a/vnet/etc/scripts/rewrite b/vnet/etc/scripts/rewrite deleted file mode 100644 index d41b9dbf7fc..00000000000 --- a/vnet/etc/scripts/rewrite +++ /dev/null @@ -1,62 +0,0 @@ - - -comment { test ipv4 port/vlan/qinq rewrites by generating arps } - -set int state tuntap-0 down - -set int ip address GigabitEthernet2/2/0 1.2.5.4/24 - -cre sub GigabitEthernet2/2/0 1 dot1q 6 exact-match -set int ip address GigabitEthernet2/2/0.1 1.2.6.4/24 - -cre sub GigabitEthernet2/2/0 2 dot1ad 7 inner-dot1q 8 exact-match -set int ip address GigabitEthernet2/2/0.2 1.2.7.4/24 - -set int state GigabitEthernet2/1/0 up -set int state GigabitEthernet2/2/0 up -set int state GigabitEthernet2/2/0.1 up -set int state GigabitEthernet2/2/0.2 up - -trace add pg-input 2 - -cle er -cle int -cle run - -packet-generator new { - name toport - limit 2 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 0050.56b7.296d - GRE: 8.0.0.1 -> 1.2.5.6 mpls_unicast - } -} - -packet-generator new { - name tovlan - limit 2 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 0050.56b7.296d - GRE: 8.0.0.1 -> 1.2.6.6 mpls_unicast - } -} - -packet-generator new { - name toqinq - limit 2 - no-recycle - node ethernet-input - interface GigabitEthernet2/1/0 - data { - IP4: 0050.56b7.7c83 -> 0050.56b7.296d - GRE: 8.0.0.1 -> 1.2.7.6 mpls_unicast - } -} - - diff --git a/vnet/etc/scripts/rightpeer/rightpeer-ioam.conf b/vnet/etc/scripts/rightpeer/rightpeer-ioam.conf deleted file mode 100644 index 3e9a8d343e2..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer-ioam.conf +++ /dev/null @@ -1,14 +0,0 @@ -comment { connects to right ping target eth3 addr db04::4/64 } -set int ip address GigabitEthernet2/4/0 db04::1/64 -set int state GigabitEthernet2/4/0 up - -comment { connects to ioam domain leftpeer addr db03::1/64 } -set int ip address GigabitEthernet2/3/0 db03::3/64 -set int state GigabitEthernet2/3/0 up - -set ip6 neighbor GigabitEthernet2/3/0 db03::1 00:50:56:b7:05:bf -set ip6 neighbor GigabitEthernet2/4/0 db04::4 00:50:56:b7:05:d2 - -ip route add db02::0/64 via db03::1 - -ioam set destination db04::4/128 pop diff --git a/vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf b/vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf deleted file mode 100644 index abba1ab0ef6..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer-l3vxlan.conf +++ /dev/null @@ -1,9 +0,0 @@ -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to leftpeer on vlan 101 } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -vxlan tunnel src 6.0.3.3 peer 6.0.3.1 vni 123 adj 6.0.2.0/24 - diff --git a/vnet/etc/scripts/rightpeer/rightpeer-lisp.conf b/vnet/etc/scripts/rightpeer/rightpeer-lisp.conf deleted file mode 100644 index 961204a346b..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer-lisp.conf +++ /dev/null @@ -1,16 +0,0 @@ -comment { local client facing interface } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to leftpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 -set int ip address lisp_gpe_tunnel0 6.0.2.3/24 -set int state lisp_gpe_tunnel0 up - -lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 -set int state lisp_gpe_tunnel1 up diff --git a/vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf b/vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf deleted file mode 100644 index 0ce38583e83..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer-mpls-l2.conf +++ /dev/null @@ -1,24 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to leftpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.1 -mpls decap add label 30 next output GigabitEthernet2/4/0 - -comment { create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 l2-only } - -comment {set int l2 xconnect GigabitEthernet2/4/0 mpls-gre0 } - -uncomment { create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.3.1/8 l2-only tx-intfc GigabitEthernet2/3/0 fib-id 1 } - -uncomment { set int l2 xconnect GigabitEthernet2/4/0 mpls-eth0 } - diff --git a/vnet/etc/scripts/rightpeer/rightpeer-mpls.conf b/vnet/etc/scripts/rightpeer/rightpeer-mpls.conf deleted file mode 100644 index fc97ba16332..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer-mpls.conf +++ /dev/null @@ -1,17 +0,0 @@ -comment { vpe_phase1d configuration } - -comment { local client facing interface } -comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } - -set int ip table GigabitEthernet2/4/0 1 -set int ip address GigabitEthernet2/4/0 6.0.4.1/24 -set int state GigabitEthernet2/4/0 up - -comment { tunnel to leftpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -mpls encap add label 30 fib 1 dest 6.0.3.1 -mpls decap add label 30 fib 1 - -create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/vnet/etc/scripts/rightpeer/rightpeer-sr.conf b/vnet/etc/scripts/rightpeer/rightpeer-sr.conf deleted file mode 100644 index 0b2a98bba1b..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer-sr.conf +++ /dev/null @@ -1,28 +0,0 @@ -comment { test sr segment chunk-offset on } -test sr hmac validate on - -comment { trunk to leftpeer } -set int ip address GigabitEthernet2/3/0 db03::1/64 -enable ip6 interface GigabitEthernet2/3/0 -set int state GigabitEthernet2/3/0 up - -comment { subscriber right peer target } -set int ip address GigabitEthernet2/4/0 db04::2/64 - -comment { next address to fake out ND on shared LAN segment } -comment { set int ip address GigabitEthernet2/4/0 db02::13/64 } - -enable ip6 interface GigabitEthernet2/4/0 -set int state GigabitEthernet2/4/0 up - -sr hmac id 2 key Gozzer -sr hmac id 3 key Hoser - -sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean key Hoser - -tap connect srlocal hwaddr random -set int ip6 table tap-0 1 -set int ip address tap-0 db04::99/64 -enable ip6 interface tap-0 -set int state tap-0 up -ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf b/vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf deleted file mode 100644 index bd4c427e768..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer-vxlan.conf +++ /dev/null @@ -1,16 +0,0 @@ - -comment { local client facing interface } - -comment { configure client lc4 eth1 } -set int state GigabitEthernet2/4/0 up - -comment { tunnel to leftpeer } -set int ip address GigabitEthernet2/3/0 6.0.3.3/24 -set int state GigabitEthernet2/3/0 up - -comment { tunnel to extra ping target } -set int ip address GigabitEthernet2/7/0 6.0.5.3/24 -set int state GigabitEthernet2/3/0 up - -vxlan tunnel src 6.0.3.3 peer 6.0.3.1 peer 6.0.3.5 vni 123 -vxlan l2 GigabitEthernet2/4/0 vni 123 diff --git a/vnet/etc/scripts/rightpeer/rightpeer.script b/vnet/etc/scripts/rightpeer/rightpeer.script deleted file mode 100644 index 153988cefad..00000000000 --- a/vnet/etc/scripts/rightpeer/rightpeer.script +++ /dev/null @@ -1,9 +0,0 @@ -l2tp_set_lookup_key lookup_v6_src - -sw_interface_add_del_address GigabitEthernet2/3/0 db03::1/64 -sw_interface_set_flags GigabitEthernet2/3/0 admin-up - -comment sw_interface_add_del_address GigabitEthernet2/4/0 db02::2/64 -sw_interface_set_flags GigabitEthernet2/4/0 admin-up - -l2tp_session_add_del client_address db03::2 our_address db03::1 GigabitEthernet2/4/0 local_session_id 3 remote_session_id 1 local_cookie 33 remote_cookie 11 diff --git a/vnet/etc/scripts/rpf b/vnet/etc/scripts/rpf deleted file mode 100644 index 571c6b79a8c..00000000000 --- a/vnet/etc/scripts/rpf +++ /dev/null @@ -1,18 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.2.3.4 -> 5.6.7.8 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 -set interface ip source-check pg/stream-0 -ip route 1.2.3.4/32 via pg/stream-0 0x01020304 -ip route 5.6.7.8/32 via drop - diff --git a/vnet/etc/scripts/rtt-test b/vnet/etc/scripts/rtt-test deleted file mode 100644 index 5501b99dc45..00000000000 --- a/vnet/etc/scripts/rtt-test +++ /dev/null @@ -1,31 +0,0 @@ -set int state TenGigabitEthernet4/0/0 up -set int state TenGigabitEthernet5/0/0 up - -set int ip address TenGigabitEthernet4/0/0 1.0.0.1/24 -set int ip address TenGigabitEthernet5/0/0 2.0.0.1/24 - -ip route table 0 1.0.0.2/32 via TenGigabitEthernet4/0/0 IP4: 00:1b:21:74:5b:04 -> 00:1b:21:79:8e:bc -ip route table 0 2.0.0.2/32 via TenGigabitEthernet5/0/0 IP4: 00:1b:21:79:8e:bc -> 00:1b:21:74:5b:04 -ip route table 1 2.0.0.2/32 via local -ip route table 1 1.0.0.2/32 via local - -set int ip table TenGigabitEthernet5/0/0 1 -set int ip table TenGigabitEthernet4/0/0 1 - -comment { trace add rtt-test-tx 100 } -comment { trace add ixge-input 100 } -comment { te rtt { 1.0.0.2 -> 2.0.0.2 count 1e4 rate 1e9 size 100 histogram-time 1e-5 } } - -packet-generator new { - name x - limit 1 - node ip4-input - size 170-170 - data { - ICMP: 1.0.0.2 -> 2.0.0.2 - ICMP echo_request - incrementing 100 - } -} - - diff --git a/vnet/etc/scripts/snat b/vnet/etc/scripts/snat deleted file mode 100644 index 87fd699ee51..00000000000 --- a/vnet/etc/scripts/snat +++ /dev/null @@ -1,34 +0,0 @@ -packet-generator new { - name f1 - limit 1000000 - node ip4-input - size 64-64 - no-recycle - worker 0 - data { - UDP: 10.0.0.3 -> 172.16.1.2 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - - -packet-generator new { - name f2 - limit 1000000 - node ip4-input - size 64-64 - no-recycle - worker 1 - data { - UDP: 10.0.0.3 -> 172.16.1.2 - UDP: 3005 -> 3006 - length 128 checksum 0 incrementing 1 - } -} - -snat add address 172.16.1.3 -ip route 172.16.1.2/32 via drop -set int ip address pg0 10.0.0.1/24 -set int snat in pg0 -trace add pg-input 10 diff --git a/vnet/etc/scripts/snat_static b/vnet/etc/scripts/snat_static deleted file mode 100644 index 8fe48bffaaa..00000000000 --- a/vnet/etc/scripts/snat_static +++ /dev/null @@ -1,44 +0,0 @@ -create packet-generator interface pg0 -create packet-generator interface pg1 - -packet-generator new { - name f1 - limit 1000000 - node ip4-input - size 64-64 - no-recycle - worker 0 - interface pg0 - data { - UDP: 10.0.0.3 -> 172.16.1.2 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - - -packet-generator new { - name f2 - limit 1000000 - node ip4-input - size 64-64 - no-recycle - worker 1 - interface pg1 - data { - UDP: 172.16.1.2 -> 172.16.1.3 - UDP: 3001 -> 3000 - length 128 checksum 0 incrementing 1 - } -} - -snat add address 172.16.1.3 -snat add static mapping local 10.0.0.3 external 172.16.1.3 -set int ip address pg0 10.0.0.1/24 -set int ip address pg1 172.16.1.1/24 -set int state pg0 up -set int state pg1 up -set ip arp static pg0 10.0.0.3 abcd.abcd.abcd -set ip arp static pg1 172.16.1.2 cdef.abcd.abcd -set int snat in pg0 out pg1 -trace add pg-input 10 diff --git a/vnet/etc/scripts/snat_static_with_port b/vnet/etc/scripts/snat_static_with_port deleted file mode 100644 index f646145a5bf..00000000000 --- a/vnet/etc/scripts/snat_static_with_port +++ /dev/null @@ -1,44 +0,0 @@ -create packet-generator interface pg0 -create packet-generator interface pg1 - -packet-generator new { - name f1 - limit 1000000 - node ip4-input - size 64-64 - no-recycle - worker 0 - interface pg0 - data { - UDP: 10.0.0.3 -> 172.16.1.2 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - - -packet-generator new { - name f2 - limit 1000000 - node ip4-input - size 64-64 - no-recycle - worker 1 - interface pg1 - data { - UDP: 172.16.1.2 -> 172.16.1.3 - UDP: 3001 -> 3000 - length 128 checksum 0 incrementing 1 - } -} - -snat add address 172.16.1.3 -snat add static mapping local 10.0.0.3 3000 external 172.16.1.3 3000 -set int ip address pg0 10.0.0.1/24 -set int ip address pg1 172.16.1.1/24 -set int state pg0 up -set int state pg1 up -set ip arp static pg0 10.0.0.3 abcd.abcd.abcd -set ip arp static pg1 172.16.1.2 cdef.abcd.abcd -set int snat in pg0 out pg1 -trace add pg-input 10 diff --git a/vnet/etc/scripts/source_and_port_range_check b/vnet/etc/scripts/source_and_port_range_check deleted file mode 100644 index dce227b4315..00000000000 --- a/vnet/etc/scripts/source_and_port_range_check +++ /dev/null @@ -1,63 +0,0 @@ - -create loop int - -set int state loop0 up -set int ip addr loop0 10.10.10.10/32 - -packet-generator new { - name deny-from-default-route - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 1.2.3.4 -> 5.6.7.8 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - -packet-generator new { - name allow - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 1.1.1.1 -> 5.6.7.8 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - -packet-generator new { - name deny-from-port-range - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 1.1.1.1 -> 5.6.7.8 - UDP: 6000 -> 6001 - length 128 checksum 0 incrementing 1 - } -} - -set ip source-and-port-range-check 1.1.1.0/24 range 2000 - 3000 vrf 99 - -set interface ip source-and-port-range-check pg0 udp-out-vrf 99 - - show ip source-and-port-range-check vrf 99 1.1.1.1 - -set ip source-and-port-range-check 1.1.1.0/24 range 4000 - 5000 vrf 99 - -set ip source-and-port-range-check 1.1.2.0/24 range 4000 - 5000 vrf 99 - -show ip source-and-port-range-check vrf 99 1.1.1.1 -show ip source-and-port-range-check vrf 99 1.1.2.1 - -set ip source-and-port-range-check 1.1.2.0/24 range 4000 - 5000 vrf 99 del - -show ip source-and-port-range-check vrf 99 1.1.2.1 - -tr add pg-input 100 diff --git a/vnet/etc/scripts/speed b/vnet/etc/scripts/speed deleted file mode 100644 index d60d671f29f..00000000000 --- a/vnet/etc/scripts/speed +++ /dev/null @@ -1,14 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-input - size 50-50 - data { - ICMP: 1.2.3.4 -> 5.6.7.8 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 -ip route 5.6.7.8/32 via pg/stream-0 000102030405060708090a0b0c0d diff --git a/vnet/etc/scripts/sr/left-linux-ping.sh b/vnet/etc/scripts/sr/left-linux-ping.sh deleted file mode 100755 index 55b835063c7..00000000000 --- a/vnet/etc/scripts/sr/left-linux-ping.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/bash -ifconfig eth2 inet6 add db02::1/64 -route -A inet6 add db04::1/128 gw db02::2 diff --git a/vnet/etc/scripts/sr/leftpeer.conf b/vnet/etc/scripts/sr/leftpeer.conf deleted file mode 100644 index 9591d968b8b..00000000000 --- a/vnet/etc/scripts/sr/leftpeer.conf +++ /dev/null @@ -1,27 +0,0 @@ -comment { test sr segment chunk-offset on } -test sr hmac validate on - -comment { trunk to rightpeer } -set int ip address GigabitEthernet2/3/0 db03::2/64 -enable ip6 interface GigabitEthernet2/3/0 -set int state GigabitEthernet2/3/0 up - -comment { subscriber left-linux-ping } -set int ip address GigabitEthernet2/2/0 db02::2/64 -enable ip6 interface GigabitEthernet2/2/0 -set int state GigabitEthernet2/2/0 up - -sr hmac id 2 key Gozzer -sr hmac id 3 key Hoser - -sr tunnel src db01::1 dst db04::1/128 next db03::1 next db04::1 tag db02::2 clean key Gozzer InPE 1 - -comment { sr unaware service chaining to db03::5 } -comment { sr tunnel src db01::1 dst db04::1/128 next db03::1 next db03::5 next db04::1 tag db02::2 clean key Gozzer InPE 1 } - -comment { tap connect srlocal hwaddr random } -comment { set int ip6 table tap-0 1 } -comment { set int ip address tap-0 db04::99/64 } -comment { enable ip6 interface tap-0 } -comment { set int state tap-0 up } -comment { ip route add table 1 db02::0/64 lookup in table 0 } diff --git a/vnet/etc/scripts/sr/right-linux-ping.sh b/vnet/etc/scripts/sr/right-linux-ping.sh deleted file mode 100755 index 029368dbb8b..00000000000 --- a/vnet/etc/scripts/sr/right-linux-ping.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash - -ifconfig eth1 inet6 add db04::1/64 -route -A inet6 add db02::1/128 gw db04::2 diff --git a/vnet/etc/scripts/sr/rightpeer.conf b/vnet/etc/scripts/sr/rightpeer.conf deleted file mode 100644 index 6da7a7afd05..00000000000 --- a/vnet/etc/scripts/sr/rightpeer.conf +++ /dev/null @@ -1,22 +0,0 @@ -comment { trunk to leftpeer } -set int ip address GigabitEthernet2/0/0 db03::1/64 -enable ip6 interface GigabitEthernet2/0/0 -set int state GigabitEthernet2/0/0 up - -comment { subscriber right-linux-ping } -set int ip address GigabitEthernet2/2/0 db04::2/64 - -comment { next address to fake out ND on shared LAN segment } -set int ip address GigabitEthernet2/2/0 db02::13/64 - -enable ip6 interface GigabitEthernet2/2/0 -set int state GigabitEthernet2/2/0 up - -sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean - -tap connect srlocal hwaddr random -set int ip6 table tap-0 1 -set int ip address tap-0 db04::99/64 -enable ip6 interface tap-0 -set int state tap-0 up -ip route add table 1 db02::0/64 lookup in table 0 diff --git a/vnet/etc/scripts/sr/srlocal.sh b/vnet/etc/scripts/sr/srlocal.sh deleted file mode 100755 index 2f568408b94..00000000000 --- a/vnet/etc/scripts/sr/srlocal.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/bash - -ifconfig srlocal inet6 add db04::1/64 -route -6 add db02::0/64 gw db04::99 diff --git a/vnet/etc/scripts/srp b/vnet/etc/scripts/srp deleted file mode 100644 index 7cc37011386..00000000000 --- a/vnet/etc/scripts/srp +++ /dev/null @@ -1,27 +0,0 @@ -srp create-interfaces -srp create-interfaces -set int hw-class fake-srp0 srp -set int hw-class fake-srp1 srp - -packet-generator new { - name x - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - ICMP: 1.0.0.2 -> 2.0.0.2 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 -set int state fake-srp0 up -set int state fake-srp1 up - -set int ip address fake-srp0 1.0.0.1/24 -set int ip address fake-srp1 2.0.0.1/24 - - - diff --git a/vnet/etc/scripts/tcp b/vnet/etc/scripts/tcp deleted file mode 100644 index a2ee8b2dacc..00000000000 --- a/vnet/etc/scripts/tcp +++ /dev/null @@ -1,16 +0,0 @@ -packet-generator new { - name x - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - TCP: 1.2.3.4 -> 5.6.7.8 - TCP: 1234 -> 5678 - incrementing 100 - } -} - -tr add pg-input 100 -ip route 5.6.7.8/32 via local -ip route 1.2.3.4/32 via local diff --git a/vnet/etc/scripts/tcp-test b/vnet/etc/scripts/tcp-test deleted file mode 100644 index 52bfbcdd8c0..00000000000 --- a/vnet/etc/scripts/tcp-test +++ /dev/null @@ -1,6 +0,0 @@ -int create-ethernet -set int ip address fake-eth0 1.2.3.4/24 -set int state fake-eth0 up -ip route 1.2.3.5/32 via local -trace add tuntap-rx 100 - diff --git a/vnet/etc/scripts/tf-ucs-1 b/vnet/etc/scripts/tf-ucs-1 deleted file mode 100644 index efa5f2dc27f..00000000000 --- a/vnet/etc/scripts/tf-ucs-1 +++ /dev/null @@ -1,16 +0,0 @@ -comment { connected to Ixia port 1} -set int ip address TenGigabitEthernet4/0/0 1.0.0.2/8 - -set int state TenGigabitEthernet4/0/0 up - -comment { connected to Ixia port 2} -set int ip address TenGigabitEthernet4/0/1 2.0.0.2/8 -set int state TenGigabitEthernet4/0/1 up - -comment { connected to Ixia port 3} -set int ip address TenGigabitEthernet6/0/0 3.0.0.2/8 -set int state TenGigabitEthernet6/0/0 up - -comment { connected to Ixia port 4} -set int ip address TenGigabitEthernet6/0/1 4.0.0.2/8 -set int state TenGigabitEthernet6/0/1 up diff --git a/vnet/etc/scripts/urpf b/vnet/etc/scripts/urpf deleted file mode 100644 index a4d875276ee..00000000000 --- a/vnet/etc/scripts/urpf +++ /dev/null @@ -1,86 +0,0 @@ - -create loop int - -set int state loop0 up -set int ip addr loop0 10.10.10.10/24 - -packet-generator new { - name transit-deny - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 1.2.3.4 -> 2.2.2.2 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - -packet-generator new { - name transit-allow - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 1.1.1.1 -> 2.2.2.2 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - -packet-generator new { - name transit-allow-from-excemption - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 11.11.12.13 -> 2.2.2.2 - UDP: 6000 -> 6001 - length 128 checksum 0 incrementing 1 - } -} - -packet-generator new { - name for-us-allow-from-excemption - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 11.11.12.13 -> 10.10.10.10 - UDP: 6000 -> 6001 - length 128 checksum 0 incrementing 1 - } -} - -packet-generator new { - name for-us-allow - limit 1 - node ip4-input - size 64-64 - no-recycle - data { - UDP: 1.1.1.1 -> 10.10.10.10 - UDP: 3000 -> 3001 - length 128 checksum 0 incrementing 1 - } -} - -tr add pg-input 100 - -set int ip addr pg0 10.10.11.10/24 - -set interface ip source-check pg0 strict - -ip route add 1.1.1.1/32 via 10.10.11.11 pg0 -ip route add 2.2.2.2/32 via 10.10.10.11 loop0 - -ip urpf-accept 11.11.0.0/16 - -#set interface ip source-check pg0 strict del -#set interface ip source-check pg0 loose - -#ip urpf-accept del 11.11.0.0/16 diff --git a/vnet/etc/scripts/virl/ip6sr.virl b/vnet/etc/scripts/virl/ip6sr.virl deleted file mode 100644 index 5d4d1a0ac67..00000000000 --- a/vnet/etc/scripts/virl/ip6sr.virl +++ /dev/null @@ -1,874 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
- <extensions>
- <entry key="management_network" type="String">flat</entry>
- <entry key="AutoNetkit.address_family" type="String">dual_stack</entry>
- <entry key="AutoNetkit.enable_routing" type="Boolean">false</entry>
- </extensions>
- <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="195,78" ipv4="192.168.0.2" ipv6="::b:1:0:0:2">
- <extensions>
- <entry key="config" type="string">!
-! Last configuration change at 16:41:18 UTC Fri Mar 27 2015
-!
-version 15.4
-service timestamps debug datetime msec
-service timestamps log datetime msec
-no service password-encryption
-!
-hostname iosv-1
-!
-boot-start-marker
-boot-end-marker
-!
-!
-enable password cisco
-!
-no aaa new-model
-!
-!
-!
-mmi polling-interval 60
-no mmi auto-configure
-no mmi pvc
-mmi snmp-timeout 180
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-no ip domain lookup
-ip cef
-ipv6 unicast-routing
-ipv6 cef
-!
-multilink bundle-name authenticated
-!
-!
-cts logging verbose
-!
-!
-!
-redundancy
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-interface Loopback0
- description Loopback
- ip address 192.168.0.2 255.255.255.255
- ipv6 address ::B:1:0:0:2/128
-!
-interface GigabitEthernet0/0
- description OOB Management
- ip address 172.16.1.193 255.255.255.0
- duplex auto
- speed auto
- media-type rj45
-!
-interface GigabitEthernet0/1
- description to vpp-1
- ip address 10.0.0.5 255.255.255.252
- duplex auto
- speed auto
- media-type rj45
- ipv6 address ::A:1:1:0:6/126
-!
-ip forward-protocol nd
-!
-!
-no ip http server
-no ip http secure-server
-!
-! route to iosv-2
-ipv6 route ::A:1:1:0:16/128 ::A:1:1:0:7
-! route to iosv-4
-ipv6 route ::A:1:1:0:22/128 ::A:1:1:0:7
-!
-!
-!
-control-plane
-!
-banner exec `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner incoming `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner login `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-!
-line con 0
- password cisco
-line aux 0
-line vty 0 4
- exec-timeout 720 0
- password cisco
- login
- transport input telnet ssh
-!
-no scheduler allocate
-!
-end</entry>
- <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" ipv6="::a:1:1:0:6" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="667,82" ipv4="192.168.0.3" ipv6="::b:1:0:0:3">
- <extensions>
- <entry key="config" type="string">!
-! Last configuration change at 16:41:10 UTC Fri Mar 27 2015
-!
-version 15.4
-service timestamps debug datetime msec
-service timestamps log datetime msec
-no service password-encryption
-!
-hostname iosv-2
-!
-boot-start-marker
-boot-end-marker
-!
-!
-enable password cisco
-!
-no aaa new-model
-!
-!
-!
-mmi polling-interval 60
-no mmi auto-configure
-no mmi pvc
-mmi snmp-timeout 180
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-no ip domain lookup
-ip cef
-ipv6 unicast-routing
-ipv6 cef
-!
-multilink bundle-name authenticated
-!
-!
-cts logging verbose
-!
-!
-!
-redundancy
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-interface Loopback0
- description Loopback
- ip address 192.168.0.3 255.255.255.255
- ipv6 address ::B:1:0:0:3/128
-!
-interface GigabitEthernet0/0
- description OOB Management
- ip address 172.16.1.191 255.255.255.0
- duplex auto
- speed auto
- media-type rj45
-!
-interface GigabitEthernet0/1
- description to vpp-2
- ip address 10.0.0.21 255.255.255.252
- duplex auto
- speed auto
- media-type rj45
- ipv6 address ::A:1:1:0:16/126
-!
-ip forward-protocol nd
-!
-!
-no ip http server
-no ip http secure-server
-!
-ipv6 route ::A:1:1:0:6/128 ::A:1:1:0:17
-!
-!
-!
-control-plane
-!
-banner exec `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner incoming `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner login `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-!
-line con 0
- password cisco
-line aux 0
-line vty 0 4
- exec-timeout 720 0
- password cisco
- login
- transport input telnet ssh
-!
-no scheduler allocate
-!
-end</entry>
- <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.21" ipv6="::a:1:1:0:16" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <node name="iosv-3" type="SIMPLE" subtype="IOSv" location="194,186" ipv4="192.168.0.6" ipv6="::b:1:0:0:4">
- <extensions>
- <entry key="config" type="string">!
-! Last configuration change at 16:27:43 UTC Fri Mar 27 2015
-!
-version 15.4
-service timestamps debug datetime msec
-service timestamps log datetime msec
-no service password-encryption
-!
-hostname iosv-3
-!
-boot-start-marker
-boot-end-marker
-!
-!
-enable password cisco
-!
-no aaa new-model
-!
-!
-!
-mmi polling-interval 60
-no mmi auto-configure
-no mmi pvc
-mmi snmp-timeout 180
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-no ip domain lookup
-ip cef
-ipv6 unicast-routing
-ipv6 cef
-!
-multilink bundle-name authenticated
-!
-!
-cts logging verbose
-!
-!
-!
-redundancy
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-interface Loopback0
- description Loopback
- ip address 192.168.0.6 255.255.255.255
- ipv6 address ::B:1:0:0:4/128
-!
-interface GigabitEthernet0/0
- description OOB Management
- ip address 172.16.1.192 255.255.255.0
- duplex auto
- speed auto
- media-type rj45
-!
-interface GigabitEthernet0/1
- description to vpp-1
- ip address 10.0.0.9 255.255.255.252
- duplex auto
- speed auto
- media-type rj45
- ipv6 address ::A:1:1:0:A/126
-!
-ip forward-protocol nd
-!
-!
-no ip http server
-no ip http secure-server
-!
-!
-!
-!
-control-plane
-!
-banner exec `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner incoming `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner login `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-!
-line con 0
- password cisco
-line aux 0
-line vty 0 4
- exec-timeout 720 0
- password cisco
- login
- transport input telnet ssh
-!
-no scheduler allocate
-!
-end</entry>
- <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" ipv6="::a:1:1:0:a" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <node name="iosv-4" type="SIMPLE" subtype="IOSv" location="668,193" ipv4="192.168.0.8" ipv6="::b:1:0:0:5">
- <extensions>
- <entry key="config" type="string">!
-! Last configuration change at 16:27:43 UTC Fri Mar 27 2015
-!
-version 15.4
-service timestamps debug datetime msec
-service timestamps log datetime msec
-no service password-encryption
-!
-hostname iosv-4
-!
-boot-start-marker
-boot-end-marker
-!
-!
-enable password cisco
-!
-no aaa new-model
-!
-!
-!
-mmi polling-interval 60
-no mmi auto-configure
-no mmi pvc
-mmi snmp-timeout 180
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-no ip domain lookup
-ip cef
-ipv6 unicast-routing
-ipv6 cef
-!
-multilink bundle-name authenticated
-!
-!
-cts logging verbose
-!
-!
-!
-redundancy
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-!
-interface Loopback0
- description Loopback
- ip address 192.168.0.8 255.255.255.255
- ipv6 address ::B:1:0:0:5/128
-!
-interface GigabitEthernet0/0
- description OOB Management
- ip address 172.16.1.194 255.255.255.0
- duplex auto
- speed auto
- media-type rj45
-!
-interface GigabitEthernet0/1
- description to vpp-2
- ip address 10.0.0.33 255.255.255.252
- duplex auto
- speed auto
- media-type rj45
- ipv6 address ::A:1:1:0:22/126
-!
-! Route to iosv-1
-ipv6 route ::A:1:1:0:6/128 ::A:1:1:0:23
-ip forward-protocol nd
-!
-!
-no ip http server
-no ip http secure-server
-!
-!
-!
-!
-control-plane
-!
-banner exec `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner incoming `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-banner login `
-**************************************************************************
-* IOSv is strictly limited to use for evaluation, demonstration and IOS *
-* education. IOSv is provided as-is and is not supported by Cisco's *
-* Technical Advisory Center. Any use or disclosure, in whole or in part, *
-* of the IOSv Software or Documentation to any third party for any *
-* purposes is expressly prohibited except as otherwise authorized by *
-* Cisco in writing. *
-**************************************************************************`
-!
-line con 0
- password cisco
-line aux 0
-line vty 0 4
- exec-timeout 720 0
- password cisco
- login
- transport input telnet ssh
-!
-no scheduler allocate
-!
-end</entry>
- <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.33" ipv6="::a:1:1:0:22" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <node name="vpp-1" type="SIMPLE" subtype="vPP" location="302,140">
- <extensions>
- <entry key="config" type="string">#cloud-config
-bootcmd:
-- ln -s -t /etc/rc.d /etc/rc.local
-hostname: vpp-1
-manage_etc_hosts: true
-runcmd:
-- start ttyS0
-- systemctl start getty@ttyS0.service
-- systemctl start rc-local
-- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
-- echo "UseDNS no" >> /etc/ssh/sshd_config
-- service ssh restart
-- service sshd restart
-- sed -i 's/no-pci//' /cisco/etc/qn.conf
-- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
-users:
-- default
-- gecos: User configured by VIRL Configuration Engine 0.15.3
- lock-passwd: false
- name: cisco
- plain-text-passwd: cisco
- shell: /bin/bash
- ssh-authorized-keys:
- - VIRL-USER-SSH-PUBLIC-KEY
- sudo: ALL=(ALL) ALL
-write_files:
-- path: /etc/init/ttyS0.conf
- owner: root:root
- content: |
- # ttyS0 - getty
- # This service maintains a getty on ttyS0 from the point the system is
- # started until it is shut down again.
- start on stopped rc or RUNLEVEL=[12345]
- stop on runlevel [!12345]
- respawn
- exec /sbin/getty -L 115200 ttyS0 vt102
- permissions: '0644'
-- path: /etc/systemd/system/dhclient@.service
- content: |
- [Unit]
- Description=Run dhclient on %i interface
- After=network.target
- [Service]
- Type=oneshot
- ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
- RemainAfterExit=yes
- owner: root:root
- permissions: '0644'
-- path: /cisco/etc/vpp-server.conf
- owner: root:root
- permissions: '0644'
- content: |-
- set interface ip address GigabitEthernet0/4/0 10.0.0.6/30
- set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:7/126
- set interface state GigabitEthernet0/4/0 up
- set interface ip address GigabitEthernet0/5/0 10.0.0.10/30
- set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:b/126
- set interface state GigabitEthernet0/5/0 up
- set interface ip address GigabitEthernet0/6/0 10.0.0.13/30
- set interface ip address GigabitEthernet0/6/0 ::a:1:1:0:e/126
- set interface state GigabitEthernet0/6/0 up
- set interface ip address GigabitEthernet0/7/0 10.0.0.17/30
- set interface ip address GigabitEthernet0/7/0 ::a:1:1:0:12/126
- set interface state GigabitEthernet0/7/0 up
- sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:16/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:16 tag 0::a:1:1:0:7 InPE 1 clean
- sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:22/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:22 tag 0::a:1:1:0:7 InPE 1 clean
-</entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" ipv6="::a:1:1:0:7" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" ipv6="::a:1:1:0:b" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="2" name="GigabitEthernet0/6/0" ipv4="10.0.0.13" ipv6="::a:1:1:0:e" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="3" name="GigabitEthernet0/7/0" ipv4="10.0.0.17" ipv6="::a:1:1:0:12" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <node name="vpp-2" type="SIMPLE" subtype="vPP" location="541,147">
- <extensions>
- <entry key="config" type="string">#cloud-config
-bootcmd:
-- ln -s -t /etc/rc.d /etc/rc.local
-hostname: vpp-2
-manage_etc_hosts: true
-runcmd:
-- start ttyS0
-- systemctl start getty@ttyS0.service
-- systemctl start rc-local
-- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
-- echo "UseDNS no" >> /etc/ssh/sshd_config
-- service ssh restart
-- service sshd restart
-- sed -i 's/no-pci//' /cisco/etc/qn.conf
-- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
-users:
-- default
-- gecos: User configured by VIRL Configuration Engine 0.15.3
- lock-passwd: false
- name: cisco
- plain-text-passwd: cisco
- shell: /bin/bash
- ssh-authorized-keys:
- - VIRL-USER-SSH-PUBLIC-KEY
- sudo: ALL=(ALL) ALL
-write_files:
-- path: /etc/init/ttyS0.conf
- owner: root:root
- content: |
- # ttyS0 - getty
- # This service maintains a getty on ttyS0 from the point the system is
- # started until it is shut down again.
- start on stopped rc or RUNLEVEL=[12345]
- stop on runlevel [!12345]
- respawn
- exec /sbin/getty -L 115200 ttyS0 vt102
- permissions: '0644'
-- path: /etc/systemd/system/dhclient@.service
- content: |
- [Unit]
- Description=Run dhclient on %i interface
- After=network.target
- [Service]
- Type=oneshot
- ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
- RemainAfterExit=yes
- owner: root:root
- permissions: '0644'
-- path: /cisco/etc/vpp-server.conf
- owner: root:root
- permissions: '0644'
- content: |-
- set interface ip address GigabitEthernet0/4/0 10.0.0.25/30
- set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:1a/126
- set interface state GigabitEthernet0/4/0 up
- set interface ip address GigabitEthernet0/5/0 10.0.0.29/30
- set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1e/126
- set interface state GigabitEthernet0/5/0 up
- set interface ip address GigabitEthernet0/6/0 10.0.0.22/30
- set interface ip address GigabitEthernet0/6/0 ::a:1:1:0:17/126
- set interface state GigabitEthernet0/6/0 up
- set interface ip address GigabitEthernet0/7/0 10.0.0.34/30
- set interface ip address GigabitEthernet0/7/0 ::a:1:1:0:23/126
- set interface state GigabitEthernet0/7/0 up
- sr tunnel src 0::a:1:1:0:16 dst 0::a:1:1:0:6/128 next 0::a:1:1:0:1b next 0::a:1:1:0:e next 0::a:1:1:0:6 tag 0::a:1:1:0:17 InPE 1 clean
-</entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.25" ipv6="::a:1:1:0:1a" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.29" ipv6="::a:1:1:0:1e" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="2" name="GigabitEthernet0/6/0" ipv4="10.0.0.22" ipv6="::a:1:1:0:17" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="3" name="GigabitEthernet0/7/0" ipv4="10.0.0.34" ipv6="::a:1:1:0:23" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <node name="vpp-3" type="SIMPLE" subtype="vPP" location="415,89">
- <extensions>
- <entry key="config" type="string">#cloud-config
-bootcmd:
-- ln -s -t /etc/rc.d /etc/rc.local
-hostname: vpp-3
-manage_etc_hosts: true
-runcmd:
-- start ttyS0
-- systemctl start getty@ttyS0.service
-- systemctl start rc-local
-- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
-- echo "UseDNS no" >> /etc/ssh/sshd_config
-- service ssh restart
-- service sshd restart
-- sed -i 's/no-pci//' /cisco/etc/qn.conf
-- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
-users:
-- default
-- gecos: User configured by VIRL Configuration Engine 0.15.3
- lock-passwd: false
- name: cisco
- plain-text-passwd: cisco
- shell: /bin/bash
- ssh-authorized-keys:
- - VIRL-USER-SSH-PUBLIC-KEY
- sudo: ALL=(ALL) ALL
-write_files:
-- path: /etc/init/ttyS0.conf
- owner: root:root
- content: |
- # ttyS0 - getty
- # This service maintains a getty on ttyS0 from the point the system is
- # started until it is shut down again.
- start on stopped rc or RUNLEVEL=[12345]
- stop on runlevel [!12345]
- respawn
- exec /sbin/getty -L 115200 ttyS0 vt102
- permissions: '0644'
-- path: /etc/systemd/system/dhclient@.service
- content: |
- [Unit]
- Description=Run dhclient on %i interface
- After=network.target
- [Service]
- Type=oneshot
- ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
- RemainAfterExit=yes
- owner: root:root
- permissions: '0644'
-- path: /cisco/etc/vpp-server.conf
- owner: root:root
- permissions: '0644'
- content: |-
- set interface ip address GigabitEthernet0/4/0 10.0.0.14/30
- set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:f/126
- set interface state GigabitEthernet0/4/0 up
- set interface ip address GigabitEthernet0/5/0 10.0.0.26/30
- set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1b/126
- set interface state GigabitEthernet0/5/0 up
- comment { fix src rpf drop screws}
- ip route add ::a:1:1:0:6/128 via drop
- ip route add ::a:1:1:0:16/128 via drop
- ip route add ::a:1:1:0:22/128 via drop
-</entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.14" ipv6="::a:1:1:0:f" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.26" ipv6="::a:1:1:0:1b" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <node name="vpp-4" type="SIMPLE" subtype="vPP" location="419,216">
- <extensions>
- <entry key="config" type="string">#cloud-config
-bootcmd:
-- ln -s -t /etc/rc.d /etc/rc.local
-hostname: vpp-4
-manage_etc_hosts: true
-runcmd:
-- start ttyS0
-- systemctl start getty@ttyS0.service
-- systemctl start rc-local
-- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
-- echo "UseDNS no" >> /etc/ssh/sshd_config
-- service ssh restart
-- service sshd restart
-- sed -i 's/no-pci//' /cisco/etc/qn.conf
-- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
-users:
-- default
-- gecos: User configured by VIRL Configuration Engine 0.15.3
- lock-passwd: false
- name: cisco
- plain-text-passwd: cisco
- shell: /bin/bash
- ssh-authorized-keys:
- - VIRL-USER-SSH-PUBLIC-KEY
- sudo: ALL=(ALL) ALL
-write_files:
-- path: /etc/init/ttyS0.conf
- owner: root:root
- content: |
- # ttyS0 - getty
- # This service maintains a getty on ttyS0 from the point the system is
- # started until it is shut down again.
- start on stopped rc or RUNLEVEL=[12345]
- stop on runlevel [!12345]
- respawn
- exec /sbin/getty -L 115200 ttyS0 vt102
- permissions: '0644'
-- path: /etc/systemd/system/dhclient@.service
- content: |
- [Unit]
- Description=Run dhclient on %i interface
- After=network.target
- [Service]
- Type=oneshot
- ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
- RemainAfterExit=yes
- owner: root:root
- permissions: '0644'
-- path: /cisco/etc/vpp-server.conf
- owner: root:root
- permissions: '0644'
- content: |-
- set interface ip address GigabitEthernet0/4/0 10.0.0.18/30
- set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:13/126
- set interface state GigabitEthernet0/4/0 up
- set interface ip address GigabitEthernet0/5/0 10.0.0.30/30
- set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1f/126
- set interface state GigabitEthernet0/5/0 up
-</entry>
- </extensions>
- <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.18" ipv6="::a:1:1:0:13" netPrefixLenV4="30" netPrefixLenV6="126"/>
- <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.30" ipv6="::a:1:1:0:1f" netPrefixLenV4="30" netPrefixLenV6="126"/>
- </node>
- <connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
- <connection dst="/virl:topology/virl:node[5]/virl:interface[2]" src="/virl:topology/virl:node[3]/virl:interface[1]"/>
- <connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[3]"/>
- <connection dst="/virl:topology/virl:node[8]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[4]"/>
- <connection dst="/virl:topology/virl:node[6]/virl:interface[1]" src="/virl:topology/virl:node[7]/virl:interface[2]"/>
- <connection dst="/virl:topology/virl:node[6]/virl:interface[2]" src="/virl:topology/virl:node[8]/virl:interface[2]"/>
- <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[6]/virl:interface[3]"/>
- <connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[6]/virl:interface[4]"/>
-</topology>
diff --git a/vnet/etc/scripts/virl/ip6sr_notes.txt b/vnet/etc/scripts/virl/ip6sr_notes.txt deleted file mode 100644 index 5febf2c690b..00000000000 --- a/vnet/etc/scripts/virl/ip6sr_notes.txt +++ /dev/null @@ -1,38 +0,0 @@ -vpp-1, tunnel 1: iosv-1 vpp-1 vpp-3 vpp-2 iosv-2
-
-iosv-1
-::a:1:1:0:6
-
-to iosv2
-ipv6 route ::a:1:1:0:16/128 ::a:1:1:0:7
-to iosv4
-ipv6 route ::a:1:1:0:22/128 ::a:1:1:0:7
-
-vpp-1
-
-::a:1:1:0:7
-...
-::a:1:1:0:e
-
-sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:16/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:16 tag 0::a:1:1:0:7 InPE 1 clean
-
-vpp-3
-::a:1:1:0:f
-..
-::a:1:1:0:1b
-
-comment {fix src rpf screws}
-ip route add ::a:1:1:0:6/128 via drop
-ip route add ::a:1:1:0:16/128 via drop
-ip route add ::a:1:1:0:22/128 via drop
-vpp-2
-::a:1:1:0:1a
-..
-::a:1:1:0:17
-
-sr tunnel src 0::a:1:1:0:16 dst 0::a:1:1:0:6/128 next 0::a:1:1:0:1b next 0::a:1:1:0:e next 0::a:1:1:0:6 tag 0::a:1:1:0:17 InPE 1 clean
-
-iosv-2
-::a:1:1:0:16
-
-ipv6 route ::a:1:1:0:6/128 ::a:1:1:0:17
diff --git a/vnet/etc/scripts/virl/mplsogre.virl b/vnet/etc/scripts/virl/mplsogre.virl deleted file mode 100644 index 33dd03299d4..00000000000 --- a/vnet/etc/scripts/virl/mplsogre.virl +++ /dev/null @@ -1,319 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="yes"?> -<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd"> - <extensions> - <entry key="management_network" type="String">flat</entry> - </extensions> - <node name="vpp-1" type="SIMPLE" subtype="vPP" location="467,307" vmImage="vPP-hacker [445e503a-564e-4c14-93e1-9660957c539a]" vmFlavor="vPP-small [e7f7de38-54e3-46f1-92ef-92b0039c1c60]"> - <extensions> - <entry key="config" type="string">#cloud-config -bootcmd: -- ln -s -t /etc/rc.d /etc/rc.local -hostname: vpp-1 -manage_etc_hosts: true -runcmd: -- start ttyS0 -- systemctl start getty@ttyS0.service -- systemctl start rc-local -- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config -- echo "UseDNS no" >> /etc/ssh/sshd_config -- service ssh restart -- service sshd restart -- sed -i 's/no-pci//' /cisco/etc/qn.conf -- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf -users: -- default -- gecos: User configured by VIRL Configuration Engine 0.15.3 - lock-passwd: false - name: cisco - plain-text-passwd: cisco - shell: /bin/bash - ssh-authorized-keys: - - VIRL-USER-SSH-PUBLIC-KEY - sudo: ALL=(ALL) ALL -write_files: -- path: /etc/init/ttyS0.conf - owner: root:root - content: | - # ttyS0 - getty - # This service maintains a getty on ttyS0 from the point the system is - # started until it is shut down again. - start on stopped rc or RUNLEVEL=[12345] - stop on runlevel [!12345] - respawn - exec /sbin/getty -L 115200 ttyS0 vt102 - permissions: '0644' -- path: /etc/systemd/system/dhclient@.service - content: | - [Unit] - Description=Run dhclient on %i interface - After=network.target - [Service] - Type=oneshot - ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease - RemainAfterExit=yes - owner: root:root - permissions: '0644' -- path: /cisco/etc/vpp-server.conf - owner: root:root - permissions: '0644' - content: |- - set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 - set interface state GigabitEthernet0/4/0 up - set interface ip address GigabitEthernet0/5/0 10.0.0.9/30 - set interface state GigabitEthernet0/5/0 up - mpls encap add label 30 fib 0 dest 10.0.0.10 - mpls decap add label 30 fib 0 - create mpls gre tunnel src 10.0.0.9 dst 10.0.0.10 intfc 10.0.0.13/30 inner-fib-id 0 outer-fib-id 0 -</entry> - </extensions> - <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/> - <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.9" netPrefixLenV4="30"/> - </node> - <node name="vpp-2" type="SIMPLE" subtype="vPP" location="591,305" vmImage="vPP-hacker [445e503a-564e-4c14-93e1-9660957c539a]" vmFlavor="vPP-small [e7f7de38-54e3-46f1-92ef-92b0039c1c60]"> - <extensions> - <entry key="config" type="string">#cloud-config -bootcmd: -- ln -s -t /etc/rc.d /etc/rc.local -hostname: vpp-2 -manage_etc_hosts: true -runcmd: -- start ttyS0 -- systemctl start getty@ttyS0.service -- systemctl start rc-local -- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config -- echo "UseDNS no" >> /etc/ssh/sshd_config -- service ssh restart -- service sshd restart -- sed -i 's/no-pci//' /cisco/etc/qn.conf -- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf -users: -- default -- gecos: User configured by VIRL Configuration Engine 0.15.3 - lock-passwd: false - name: cisco - plain-text-passwd: cisco - shell: /bin/bash - ssh-authorized-keys: - - VIRL-USER-SSH-PUBLIC-KEY - sudo: ALL=(ALL) ALL -write_files: -- path: /etc/init/ttyS0.conf - owner: root:root - content: | - # ttyS0 - getty - # This service maintains a getty on ttyS0 from the point the system is - # started until it is shut down again. - start on stopped rc or RUNLEVEL=[12345] - stop on runlevel [!12345] - respawn - exec /sbin/getty -L 115200 ttyS0 vt102 - permissions: '0644' -- path: /etc/systemd/system/dhclient@.service - content: | - [Unit] - Description=Run dhclient on %i interface - After=network.target - [Service] - Type=oneshot - ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease - RemainAfterExit=yes - owner: root:root - permissions: '0644' -- path: /cisco/etc/vpp-server.conf - owner: root:root - permissions: '0644' - content: |- - set interface ip address GigabitEthernet0/4/0 10.0.0.10/30 - set interface state GigabitEthernet0/4/0 up - set interface ip address GigabitEthernet0/5/0 10.0.0.14/30 - set interface state GigabitEthernet0/5/0 up - mpls encap add label 30 fib 0 dest 10.0.0.9 - mpls decap add label 30 fib 0 - create mpls gre tunnel src 10.0.0.10 dst 10.0.0.9 intfc 10.0.0.5/30 inner-fib-id 0 outer-fib-id 0 -</entry> - </extensions> - <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.10" netPrefixLenV4="30"/> - <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.14" netPrefixLenV4="30"/> - </node> - <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="326,311" ipv4="192.168.0.1"> - <extensions> - <entry key="config" type="string">! IOS Config generated on 2015-03-03 17:26 -! by autonetkit_0.15.0 -! -hostname iosv-1 -boot-start-marker -boot-end-marker -! -no aaa new-model -! -! -ip cef -ipv6 unicast-routing -ipv6 cef -! -! -service timestamps debug datetime msec -service timestamps log datetime msec -no service password-encryption -no service config -enable password cisco -ip classless -ip subnet-zero -no ip domain lookup -line vty 0 4 - transport input ssh telnet - exec-timeout 720 0 - password cisco - login -line con 0 - password cisco -! -! -interface Loopback0 - description Loopback - ip address 192.168.0.1 255.255.255.255 -! -interface GigabitEthernet0/0 - description OOB Management - ! Configured on launch - no ip address - duplex auto - speed auto - no shutdown -! -interface GigabitEthernet0/1 - description to vpp-1 - ip address 10.0.0.5 255.255.255.252 - ip ospf cost 1 - duplex auto - speed auto - no shutdown -! -! -! -router ospf 1 - network 192.168.0.1 0.0.0.0 area 0 - log-adjacency-changes - passive-interface Loopback0 - network 10.0.0.4 0.0.0.3 area 0 -! -! -router bgp 1 - bgp router-id 192.168.0.1 - no synchronization -! ibgp - ! ibgp peers - ! - neighbor 192.168.0.4 remote-as 1 - neighbor 192.168.0.4 description iBGP peer iosv-2 - neighbor 192.168.0.4 update-source Loopback0 -! -! - ! - address-family ipv4 - network 192.168.0.1 mask 255.255.255.255 - neighbor 192.168.0.4 activate - exit-address-family -! -! -! -ip route 10.0.0.13 255.255.255.255 10.0.0.6 -end -</entry> - <entry key="AutoNetkit.mgmt_ip" type="string"></entry> - </extensions> - <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/> - </node> - <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="741,307" ipv4="192.168.0.4"> - <extensions> - <entry key="config" type="string">! IOS Config generated on 2015-03-03 17:26 -! by autonetkit_0.15.0 -! -hostname iosv-2 -boot-start-marker -boot-end-marker -! -no aaa new-model -! -! -ip cef -ipv6 unicast-routing -ipv6 cef -! -! -service timestamps debug datetime msec -service timestamps log datetime msec -no service password-encryption -no service config -enable password cisco -ip classless -ip subnet-zero -no ip domain lookup -line vty 0 4 - transport input ssh telnet - exec-timeout 720 0 - password cisco - login -line con 0 - password cisco -! -! -interface Loopback0 - description Loopback - ip address 192.168.0.4 255.255.255.255 -! -interface GigabitEthernet0/0 - description OOB Management - ! Configured on launch - no ip address - duplex auto - speed auto - no shutdown -! -interface GigabitEthernet0/1 - description to vpp-2 - ip address 10.0.0.13 255.255.255.252 - ip ospf cost 1 - duplex auto - speed auto - no shutdown -! -! -! -router ospf 1 - network 192.168.0.4 0.0.0.0 area 0 - log-adjacency-changes - passive-interface Loopback0 - network 10.0.0.12 0.0.0.3 area 0 -! -! -router bgp 1 - bgp router-id 192.168.0.4 - no synchronization -! ibgp - ! ibgp peers - ! - neighbor 192.168.0.1 remote-as 1 - neighbor 192.168.0.1 description iBGP peer iosv-1 - neighbor 192.168.0.1 update-source Loopback0 -! -! - ! - address-family ipv4 - network 192.168.0.4 mask 255.255.255.255 - neighbor 192.168.0.1 activate - exit-address-family -! -! -ip route 10.0.0.5 255.255.255.255 10.0.0.14 -! -end -</entry> - <entry key="AutoNetkit.mgmt_ip" type="string"></entry> - </extensions> - <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.13" netPrefixLenV4="30"/> - </node> - <connection dst="/virl:topology/virl:node[1]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[1]"/> - <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[2]"/> - <connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[2]/virl:interface[2]"/> -</topology> diff --git a/vnet/etc/scripts/virl/simple.virl b/vnet/etc/scripts/virl/simple.virl deleted file mode 100644 index 6033c42c36a..00000000000 --- a/vnet/etc/scripts/virl/simple.virl +++ /dev/null @@ -1,389 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="yes"?> -<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd"> - <extensions> - <entry key="management_network" type="String">flat</entry> - </extensions> - <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="427,219" ipv4="192.168.0.2"> - <extensions> - <entry key="config" type="string">! -! Last configuration change at 14:27:32 UTC Fri Mar 27 2015 -! -version 15.4 -service timestamps debug datetime msec -service timestamps log datetime msec -no service password-encryption -! -hostname iosv-1 -! -boot-start-marker -boot-end-marker -! -! -enable password cisco -! -no aaa new-model -! -! -! -mmi polling-interval 60 -no mmi auto-configure -no mmi pvc -mmi snmp-timeout 180 -! -! -! -! -! -! -! -! -! -! -! -! -! -no ip domain lookup -ip cef -ipv6 unicast-routing -ipv6 cef -! -multilink bundle-name authenticated -! -! -cts logging verbose -! -! -! -redundancy -! -! -! -! -! -! -! -! -! -! -! -! -! -! -! -interface Loopback0 - description Loopback - ip address 192.168.0.2 255.255.255.255 -! -interface GigabitEthernet0/0 - description OOB Management - ip address 172.16.1.167 255.255.255.0 - duplex auto - speed auto - media-type rj45 -! -interface GigabitEthernet0/1 - description to vpp-1 - ip address 10.0.0.5 255.255.255.252 - ip ospf cost 1 - duplex auto - speed auto - media-type rj45 -! -router ospf 1 - passive-interface Loopback0 - network 10.0.0.4 0.0.0.3 area 0 - network 192.168.0.2 0.0.0.0 area 0 -! -router bgp 1 - bgp router-id 192.168.0.2 - bgp log-neighbor-changes - neighbor 192.168.0.3 remote-as 1 - neighbor 192.168.0.3 description iBGP peer iosv-2 - neighbor 192.168.0.3 update-source Loopback0 - ! - address-family ipv4 - network 192.168.0.2 mask 255.255.255.255 - neighbor 192.168.0.3 activate - exit-address-family -! -ip forward-protocol nd -! -! -no ip http server -no ip http secure-server -ip route 10.0.0.9 255.255.255.255 10.0.0.6 -! -! -! -! -control-plane -! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh -! -no scheduler allocate -! -end</entry> - <entry key="AutoNetkit.mgmt_ip" type="string"></entry> - </extensions> - <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/> - </node> - <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="704,221" ipv4="192.168.0.3"> - <extensions> - <entry key="config" type="string">! -! Last configuration change at 14:26:58 UTC Fri Mar 27 2015 -! -version 15.4 -service timestamps debug datetime msec -service timestamps log datetime msec -no service password-encryption -! -hostname iosv-2 -! -boot-start-marker -boot-end-marker -! -! -enable password cisco -! -no aaa new-model -! -! -! -mmi polling-interval 60 -no mmi auto-configure -no mmi pvc -mmi snmp-timeout 180 -! -! -! -! -! -! -! -! -! -! -! -! -! -no ip domain lookup -ip cef -ipv6 unicast-routing -ipv6 cef -! -multilink bundle-name authenticated -! -! -cts logging verbose -! -! -! -redundancy -! -! -! -! -! -! -! -! -! -! -! -! -! -! -! -interface Loopback0 - description Loopback - ip address 192.168.0.3 255.255.255.255 -! -interface GigabitEthernet0/0 - description OOB Management - ip address 172.16.1.164 255.255.255.0 - duplex auto - speed auto - media-type rj45 -! -interface GigabitEthernet0/1 - description to vpp-1 - ip address 10.0.0.9 255.255.255.252 - ip ospf cost 1 - duplex auto - speed auto - media-type rj45 -! -router ospf 1 - passive-interface Loopback0 - network 10.0.0.8 0.0.0.3 area 0 - network 192.168.0.3 0.0.0.0 area 0 -! -router bgp 1 - bgp router-id 192.168.0.3 - bgp log-neighbor-changes - neighbor 192.168.0.2 remote-as 1 - neighbor 192.168.0.2 description iBGP peer iosv-1 - neighbor 192.168.0.2 update-source Loopback0 - ! - address-family ipv4 - network 192.168.0.3 mask 255.255.255.255 - neighbor 192.168.0.2 activate - exit-address-family -! -ip forward-protocol nd -! -! -no ip http server -no ip http secure-server -ip route 10.0.0.5 255.255.255.255 10.0.0.10 -! -! -! -! -control-plane -! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh -! -no scheduler allocate -! -end</entry> - <entry key="AutoNetkit.mgmt_ip" type="string"></entry> - </extensions> - <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" netPrefixLenV4="30"/> - </node> - <node name="vpp-1" type="SIMPLE" subtype="vPP" location="561,217"> - <extensions> - <entry key="config" type="string">#cloud-config -bootcmd: -- ln -s -t /etc/rc.d /etc/rc.local -hostname: vpp-1 -manage_etc_hosts: true -runcmd: -- start ttyS0 -- systemctl start getty@ttyS0.service -- systemctl start rc-local -- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config -- echo "UseDNS no" >> /etc/ssh/sshd_config -- service ssh restart -- service sshd restart -- sed -i 's/no-pci//' /cisco/etc/qn.conf -- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf -users: -- default -- gecos: User configured by VIRL Configuration Engine 0.15.3 - lock-passwd: false - name: cisco - plain-text-passwd: cisco - shell: /bin/bash - ssh-authorized-keys: - - VIRL-USER-SSH-PUBLIC-KEY - sudo: ALL=(ALL) ALL -write_files: -- path: /etc/init/ttyS0.conf - owner: root:root - content: | - # ttyS0 - getty - # This service maintains a getty on ttyS0 from the point the system is - # started until it is shut down again. - start on stopped rc or RUNLEVEL=[12345] - stop on runlevel [!12345] - respawn - exec /sbin/getty -L 115200 ttyS0 vt102 - permissions: '0644' -- path: /etc/systemd/system/dhclient@.service - content: | - [Unit] - Description=Run dhclient on %i interface - After=network.target - [Service] - Type=oneshot - ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease - RemainAfterExit=yes - owner: root:root - permissions: '0644' -- path: /cisco/etc/vpp-server.conf - owner: root:root - permissions: '0644' - content: |- - set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 - set interface state GigabitEthernet0/4/0 up - set interface ip address GigabitEthernet0/5/0 10.0.0.10/30 - set interface state GigabitEthernet0/5/0 up -</entry> - </extensions> - <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/> - <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" netPrefixLenV4="30"/> - </node> - <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/> - <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[2]"/> -</topology> diff --git a/vnet/etc/scripts/vlan b/vnet/etc/scripts/vlan deleted file mode 100644 index 076080a6978..00000000000 --- a/vnet/etc/scripts/vlan +++ /dev/null @@ -1,23 +0,0 @@ -int create-ethernet -int create-sub fake-eth0 1 -set int state fake-eth0 up -set int state fake-eth0.1 up - -packet-generator new { - name x - limit 1 - node ethernet-input - interface fake-eth0 - size 64-64 - no-recycle - data { - IP4: 1.2.3 -> 4.5.6 vlan 1 - ICMP: 1.2.3.4 -> 5.6.7.8 - ICMP echo_request - incrementing 100 - } -} - -tr add pg-input 100 -ip route 5.6.7.8/32 via local -ip route 1.2.3.4/32 via local |