aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-10-08tests: handle unicode charactes in cli outputKlement Sekera1-1/+2
Type: fix Change-Id: Ic4fb53e6d10a1de155a3088be81d53d9efeb0c0f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-08hsa: make vpp_echo use mq instead of bapiNathan Skrzypczak10-193/+288
Type: refactor Change-Id: I4f370b09e22dbbc8920272df9a042dae04825bfc Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-10-08session: add is_migrating flagNathan Skrzypczak4-49/+40
Type: fix Add SESSION_F_IS_MIGRATING flag for session. It is set by the session layer before poking the transport for migration. It's the transport responsibility to unset the flag & act apropriatly if RX happens on a migrating session. Change-Id: Ie722917f1cf9344d8f041cad4ed8b064fb5853b6 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-10-07api: Add API support for marvell PP2 pluginJianlin Lv7-1/+336
Support create/delete interface with PP2 api Type: feature Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com> Change-Id: Ia9c0ac0f237fd9f71f5480d736d6bcabee763fff
2019-10-07ip: remove dead code in ip6-svrKlement Sekera1-27/+0
Type: fix Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75 Change-Id: Ia714c2e46627864091d3f686dbced4cdd9c1a773 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-07docs: change VPP_WITH_SAMPLE_PLUGIN to SAMPLE_PLUGIN in sample plugin ↵Haggai Eran1-4/+4
documentation The sample_plugin_doc.md file refers to VPP_WITH_SAMPLE_PLUGIN make parameter, while the VPP makefile uses SAMPLE_PLUGIN instead. Type: docs Signed-off-by: Haggai Eran <haggai.eran@gmail.com> Change-Id: Id11090fcdc78b77e246da48d0d890865011f1132
2019-10-07devices: vhost not reading packets from vringSteven Luong2-0/+25
In a rare event, after the vhost protocol message exchange has finished and the interface had been brought up successfully, the driver MAY still change its mind about the memory regions by sending new memory maps via SET_MEM_TABLE. Upon processing SET_MEM_TABLE, VPP invalidates the old memory regions and the descriptor tables. But it does not re-compute the new descriptor tables based on the new memory maps. Since VPP does not have the descriptor tables, it does not read the packets from the vring. In the normal working case, after SET_MEM_TABLE, the driver follows up with SET_VRING_ADDRESS which VPP computes the descriptor tables. The fix is to stash away the descriptor table addresses from SET_VRING_ADDRESS. Re-compute the new descriptor tables when processing SET_MEM_TABLE if descriptor table addresses are known. Type: fix Ticket: VPP-1784 Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I3361f14c3a0372b8d07943eb6aa4b3a3f10708f9 (cherry picked from commit 61b8ba69f7a9540ed00576504528ce439f0286f5)
2019-10-07rdma: fix crash when failing to read pci addr on createBenoît Ganne1-0/+3
Type: fix Change-Id: I543e2e5976cb384b81278a7ec98a0a6ab1612438 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-07rdma: fix crash when failing to detect numa node on createBenoît Ganne1-0/+5
Type: fix Change-Id: Ibb8e7c1c13869c1dce2385f58bd7260fcf776c5a Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-07dhcp: Move to pluginNeale Ranns38-1736/+1776
Type: feature Change-Id: I3fe27a8ef577741d9a5c4f090ec91cf68fb44fe3 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-07mactime: add a "top" command to watch device statsDave Barach8-26/+941
Include a binary API change NOT suitable for cherry-picking into 19.08 Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Id369514a3085f5e4bcee34819c55c4636df9b518
2019-10-07ip: add tracing for ipv6 frag headersKlement Sekera1-0/+24
Type: feature Change-Id: I0e049b28d8c21b67ea4545e865eda4e88f10e485 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-07quic: fix wrong condition in update_fifo_sizeMathiasRaoul1-1/+1
Type: fix Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: If371cde9412be29634164830c58634da248ad0ae
2019-10-07mactime: remove unnecessary function declarationNeale Ranns1-2/+0
Type: fix Change-Id: I80cb666d9eae9d0f780d51fb95454d97ed320454 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-07vlib: move thread barrier around mod of global node next dataChristian E. Hopps1-6/+5
The old code modified the node next array prior to obtaining the thread barrier. Then it updated the runtime node data, and upon barrier release caused reforking of each worker thread. The reforking clones the main thread nodes and reconstructs the runtime node structure. This cloning is not 100% "deep" in the sense that the node next array is shared (i.e., only the pointer is copied). So prior to the barrier being obtained the node's next array is being changed while workers are actively using it (bad). Treating the node next array as read-only in the workers and sharing it is a decent optimization so instead of trying to fix that just move the barrier a little earlier in the process to protect the node next array as well. This was tripping an assert in next frame ownership change by way of the ip4-arp node. The assert verifies that the node's next array length is equal to the runtime next node count. The race above was lost and the node next array data was updated in the main thread while the arp code was still executing in a worker. This was being hit when many arp requests were being sent from both ends of a tunnel during which the add next node function was called, which often led to an assert b/c the next node array was out of sync with the runtime next node count. - PS#2 update - move barrier sync to just above code that modifies state. Ticket: VPP-1783 Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: I868784e28f994ee0922aaaae11c4894a3f4f1fe7 Signed-off-by: Christian E. Hopps <chopps@chopps.org>
2019-10-07quic: Refactor naming & clibsNathan Skrzypczak2-277/+209
Type: refactor Change-Id: I067fc7dbcc0985277df01384d9dcdb0bdf62fba5 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-10-07docs: grammar police raidDave Barach1-7/+9
Edit the front-page intro text. Fix egregious grammar errors, including an "it's" vs. "its" blunder. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: If9d7d07899c402cd49bbae988110a15216035b02
2019-10-07ip: reassembly add missing gotoKlement Sekera1-0/+1
Type: fix Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75 Change-Id: I256ef153b3b27a1f7ab7daa45015a2ec4bc84076 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-07ip: reassembly remove dead codeKlement Sekera1-8/+0
Type: fix Fixes: de34c35fc73226943538149fae9dbc5cfbdc6e75 Change-Id: I79589f648f4c75762e5277fb94636a91fa36ccdd Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-10-07build: add env variable to pass extra cmake argsNathan Skrzypczak1-0/+4
If VPP_EXTRA_CMAKE_ARGS is set, its content will be appended to the vpp cmake command cli Type: feature Change-Id: I825d4239e62b0a2fb70a652f0671f6c559630aad Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2019-10-07dhcp: API return code fixNeale Ranns1-2/+2
Type: fix Change-Id: Ifcbfeecd6ca1215ec473eec4cce736ab4eacde80 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-07ip: MFIB CLI fix for parsing path flagsNeale Ranns2-3/+4
Type: fix Change-Id: I7ed9726d8c5ca26715a84b004a18fd7f93142486 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-06rdma: prevent loopback of broadcast packetsBenoît Ganne1-4/+9
TX queues must be created before RX queues on Mellanox cards in order to not receive our own broadcast packets. Type: fix Change-Id: I32ae25a47d819f715feda621a5ecddcf4efd71ba Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-06bonding: traffic traversing the wrong interfaceSteven Luong1-0/+1
Missing an increment in the while loop. Hashes not stored in the array. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I603027f5a7305478f48a102ac8035ffde9102c53 (cherry picked from commit 0471cdbd3fe04a88a8b70b5f0eff0c378e19abf7)
2019-10-06ip: Fix IP unnumbered dump of one interfaceNeale Ranns2-1/+10
Type: fix Change-Id: I35fb6fdfba50c4a59cf1ffb94cb51487bcf5afc9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-10-05misc: add "show run summary"Dave Barach1-11/+19
Prints the interior node vector rate, rx / tx / drop rates Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I57130db0f99e852a8498aa90d01e52f7ac33dcc9
2019-10-05rdma: make sure pci subsystem is initializedBenoît Ganne1-1/+6
The rdma driver use the pci subsystem, make sure the dependency is recorded. Type: fix Change-Id: Ibd613f623d355612881acc31b9423f2de13793a3 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-05vlib: pci: set pci driver name to none when no driver is loadedBenoît Ganne1-0/+2
If no Linux PCI driver module is loaded, then the driver_name in the PCI info struct is NULL. This can triggers crash when checking driver name eg. in vlib_pci_device_open(). Default to "<NONE>" as driver name, which should never match. Type: fix Change-Id: I9e69889a7566467bd8220b92bbbaa72ada957257 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-04docs: add packet-generator writeupDave Barach1-0/+183
Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I4abb5c17e6fdfeaed5bbadb2ce83098dde6d05b1
2019-10-04hsa: make APP_OPTIONS_PREALLOC_FIFO_PAIRS configurableMathiasRaoul3-1/+5
-add prealloc_fifo_pairs member in echo_main_t -new cli parameter in vpp_echo Type: feature Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: I6bb1214ee93e06421cd0a3721420278c51cd59c4
2019-10-04quic: make quic fifo size configurable via cliMathiasRaoul2-6/+83
Type: feature Change-Id: I6d6ac649094ef4bee2aed311915dd58f11972e79 Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
2019-10-04ip: fix use-after-free in IPv6 SLAAC expirationBenoît Ganne1-3/+11
Type: fix Change-Id: I46b166b3a10c4543eafa4422531dd3c725db45f1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-04quic: update quicly to v0.0.5MathiasRaoul4-53/+109
-Update quicly patches -Remove event logger (removed from quicly). -Update quicly functions calls Type: feature Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: I0355befeb5ce961928f17225c83890ba87cf6ebc
2019-10-04vppinfra: create unformat function for data size parsingMathiasRaoul2-0/+26
Type: feature Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com> Change-Id: I8d71078a9ed42326e19453ea10008c6bb6992c52
2019-10-04nat: fix use-after-freeBenoît Ganne1-4/+6
Type: fix Change-Id: Iac91c086c4e975f0bada058f40b7b7d4475377f8 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-03tcp: unittest: do not access non-existent samplesBenoît Ganne1-1/+0
There is no bt->samples for this test, do not use it. Type: fix Change-Id: I2090290887bc5c0b5cdb0561cf2bf72a87781089 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-03acl: fix intermittent test failureAndrew Yourtchenko1-9/+9
ACL tests use random port number in the tests. A port number 6081 causes the decode in scapy to consume some of the Raw payload into GENEVE encoding, which breaks the test. Solution: bring up the lower range of random port to 16384, so that it does not touch any of the well known ports. Type: test Change-Id: I022660d8ec147857924b436f1871b0b5ddcf4c47 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-10-03ebuild: Unite default build platform to vppjuraj.linkes1-1/+1
Top level makefile is using vpp as the default platform. The other place where platform is specified has native as the default. Unite them to the only currently supported platform - vpp. Type: make Change-Id: Idb12ccc3056dd6be640a2d6763dc30e4f789d2ac Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2019-10-03misc: add "maxframe" and "rate" to packet-generator cli.Christian E. Hopps3-5/+13
Allow for setting the maximum number of generated packets to be included in the frame passed to next nodes. This is very important for testing code which may be susceptible to multi-frame vs single-frame bugs (e.g., code that is doing re-ordering where packets may be buffered between frames). Update: - remove redundant packet "rate" option. - reduce n_max_frame to u32 as that's what pulled from the CLI. Type: feature Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: Ie362bbb110b2cf01d9f65c559bbe9101e17b7fdc Signed-off-by: Christian Hopps <chopps@labn.net>
2019-10-03emacs: track improvements in vppapigenDave Barach7-270/+17
Remove boilerplate which is now generated by vppapigen Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I36bff1a651ac48caa969ed76d963b0a733ef5532
2019-10-03memif: memif buffer leaks during disconnect.Padma Ram1-2/+36
- code added to release the mbuf's to main pool during memif disconnect. Type: fix Change-Id: I504dacc9a40bc1702831cf3208fd532d1ae68a6f Signed-off-by: Padma Ram <padmaram86.raja@gmail.com>
2019-10-03api: fix non-null-terminated C-stringBenoît Ganne1-5/+10
Type: fix Change-Id: I132112bf77e1fad7fc0227a96e6b0cee590295e8 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2019-10-03ipsec: initialize msgid and allow no dh in child saChristian E. Hopps1-14/+18
- set msgid to 0 not random. - allow for no DH in ESP child SA Ticket: VPP-1781 Type: fix Signed-off-by: Christian E. Hopps <chopps@chopps.org> Change-Id: Ibe26009d38f444eeaec5b042097f145d161c7672
2019-10-03ethernet: fix dmac filter coverity warningMatthew Smith1-1/+1
Static analysis says that a possibly null pointer is dereferenced. Check it first. Type: fix Change-Id: I3d1a1548162d1dfc26f19fbcf159f0f1f91eb7c4 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2019-10-03pppoe: remove api boilerplateOle Troan6-197/+9
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I42705c508e88dae40a4c19ab20a1340623a57e16
2019-10-03oddbuf: remove api boilerplateOle Troan7-210/+12
Type: refactor Change-Id: Ic4922da46bf941249dd74b1a8bc6a98c62c099b7 Signed-off-by: Ole Troan <ot@cisco.com>
2019-10-03nsim: remove api boilerplateOle Troan6-223/+11
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Idf2206ae3e3d8dd05e98528ee1f02c4c7d567f37
2019-10-03dpdk: remove api boilerplateOle Troan6-236/+11
Type: refactor Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I2cba1e2912902b092348dddcf9cbcba231c75995
2019-10-03feature: API cleanupJakub Grajciar1-6/+8
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Id1e7210298cb494f3cb7a47a9ecf2bc1d9c1d58e
2019-10-03dhcp: API cleanupJakub Grajciar14-370/+421
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: Ia63d920788add2584060a240321acced7a471640