Age | Commit message (Collapse) | Author | Files | Lines |
|
This makes libc use vpp main heap instead of the default libc heap.
This gives better visibility (accounting, tracing) on allocations
happening in external libraries called from vpp (eg. OpenSSL).
Type: feature
Change-Id: I5d8a673472145a4e090bedb443b8c58a967d1cca
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6455f2d38a2927f16fd4cb0e26b8560a2357cebe
|
|
Implements CLI to show the IPv6 address used as source address for the SRv6 encapsulation.
Type: feature
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: Ia442d9345a7793836148d890745fc5dc92729b6f
|
|
When a 'del' is used to delete a classify table, only the
mask is needed to locate the table. Any match vector is
unneeded. The tests failed to notice this, but if the
test is run by hand in vppctl, it issues a parse error.
Fix the test so that it doesn't supply irrelevant data.
Fix the CLI processing to read always complete newline
terminated line of input instead. This allows unneeded
CLI parameters to be ignored. It also necessitated
fixing a trace test which had then erroneously split
a single CLI command over multiple lines.
While in the area, fix a latent bug on table matching
where a test for compatible mask vector sizes were
not matching impedance properly (byte vs ux32x4).
Type: fix
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Change-Id: I1177ab1dd417f3d11f30eecbaa2b0fb1015c3ab5
|
|
Type: fix
When using sNAT in combination with cnat translations
it might happen that the cnat_node_vip.c picks up a
translation on a session that has an invalid lb index,
thus resulting in a later crash in ip4-load-balance
Change-Id: I82607086b2d672a9dcf26bfb82ad7f83e6474562
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Quite a noticeable amount of memory. Recoded ra event tx and rx fns in
the usual manner, which terminated the leaks.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I486d348456b465ad3940a280d4cf489e8dd655a5
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I73fbf991f42e643f906b6a3badd95ef46106eb25
|
|
Session layer only supports bapi with socket transport or app socket api
attachements. Going forward this will be further restricted to the
latter.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ib368cf2ce92bbca192cca977664800879cd4058e
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I21bda0c46406aff54ad8fe5e44491e8e332de170
|
|
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If8a19eb6688755311a3430437331ddf13c7e28c8
|
|
Fifo chunk ooo lookup data structures are private (not allocated on
segment heap) and should only be initialized by transport protocols that
require out-of-order enqueues/dequeues (like tcp).
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iaa15d6850385bf903cc501c54c2752e8e811449e
|
|
Type: test
Change-Id: I9c1129a8596344551f3f8f2e029846d22511482e
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
First step towards deprecating the use of binary api's segment for mq
allocation.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9d3d17e4d406575d64e0426bb65465130a84980a
|
|
When using classifier to filter traces, not all packets will be traced.
In that case, we should only count traced packets.
Type: fix
Change-Id: I87d1e217b580ebff8c6ade7860eb43950420ae78
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: Id922895c269f0d2450e55fcb6871b6857f443462
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I8c66f79f2d8cfff7c6d45e1fc5b529ffb3941491
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
A plugin can set the speed on a host interface making it possible for
host applications to be aware of the actual interface speed, not the
one that the driver reports by default.
With this change, add a function to set speed on a host interface.
Type: feature
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I259a52b736022bdd805e8d92dcd1bfd5c58f6f96
|
|
ipsec_{crypto,integ}_alg_t are packed and smaller than u32. Callers are
using those enums so unformat functions should too instead of u32 to
not overflow the stack.
Type: fix
Change-Id: Ifc86366f1928ca6352f06f390a88ac64668289d5
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I195949b610dca1b860baca18a059d39949627961
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I840741dfe040718b682935cdbcb0ba958d45a591
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Thanks to Shaligram Prakash <Shaligram.Prakash@enea.com> for reporting.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I135d23957a0dbb56a30994dfe3a316efd1eabad1
|
|
Type: fix
Fixes: 17a8ab6857f023bc1436d84808acc58dd614203e
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I597d08d1d2457116e6856fa40cd65987e13a28d4
|
|
While underlying mspace_malloc() respects MALLOC_ALIGNMENT (16)
mspace_get_aligned moves start of data for 4 bytes making final result
not aligned to MALLOC_ALIGNED.
Type: fix
Change-Id: Ib1584f315e3658b3b748ebf4886fb7389ce640fe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I0e24f1d2ad5c7a11a8bd40125428f86aca867bec
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Ask linker to remove symbols which are not referenced or exported.
Type: improvement
Change-Id: Iec01fda7ec5b14bab8f36d25c2652bd6fe619961
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I478f5dcbf7595c62611d25a40aa356d8ce09d216
|
|
Type: feature
Add a function to adjust the link state of the host side of a tap
interface. If an application (e.g. route protocol daemons) running on
the host uses netlink to monitor interface state, a plugin
could use this function to communicate a loss of connectivity
to the application by making the interface appear to go down.
Requires a somewhat recent kernel. E.g. it does not have any effect
on CentOS 7 but it works on CentOS 8.
Change-Id: I677ee7889d2eb142e2395bea98f0b4d7e7e7f810
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: improvement
Change-Id: Iaf98a60e37dd28828feca365b8fdc5d2f7ae6935
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: docs
Change-Id: I96d5cdb41bd938f06d2d72f2625bf1b3d2c5b1b4
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Compile time reduced from ~30s to 2s for
cnat_node_vip.c & cnat_node_snat.c This doesn't
impact performance for now as ts update rwlock
is the main bottleneck.
Type: improvement
Change-Id: Ic92df300ae0dfddc5235c350bd021e73e7c850d9
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: I9930a2a90caa78e848fe657ab2da863467be41ea
|
|
Improves compile time....
Type: improvement
Change-Id: I310a2e55e5e488a953d65fd065f7795a43d2e9a7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When removing an interface we must reset all per-interface per-feature
arc data to ensure we do not get wrong feature arc config data when the
sw_if_index is recycled.
Type: fix
Change-Id: I8c9d850d7c62b7b77193da4258ab5fb9bdda85a6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibbdfb0a2d1ff64044a0f6b2443b526bd1cf12f93
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I835b61f0b88a7324b09d82400debd78ad8b95401
|
|
Type: fix
Change-Id: Ib496e6eb0a76e6268aea09d5f4495f3ecd921ec2
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Inspired by a real-life conundrum: scenario X involves a vpp crash in
ip4-load-balance because vnet_buffer(b)->ip.adj_index[VLIB_TX] is
(still) set to ~0.
The problem takes most of a day to occur, and we need to see the
broken packet's graph trajectory, metadata, etc. to understand the
problem.
Fix a signed/unsigned ASSERT bug in vlib_get_trace_count().
Rename elog_post_mortem_dump() -> vlib_post_mortem_dump(), add
dispatch trace post-mortem dump.
Add FILTER_FLAG_POST_MORTEM so we can (putatively) capture a ludicrous
number of buffer traces, without actually using more than one dispatch
cycle's worth of memory.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: If093202ef071df46e290370bd9b33bf6560d30e6
|
|
Type: fix
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Change-Id: I428c87e581db335362fef30e274db8947a896416
|
|
Type: feature
Ticket: VPP-1935
Change-Id: I705f84047b112279377590157a1c7b4a34f693d2
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: If87f4b8ae92508215fe91178958fe2ddb91e5a35
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This helps to resolve sporadic failures in unit tests.
Type: fix
Change-Id: I3abd77ed74310f9729a841e8569eafe6d7758dcb
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: Ib454ccae5a81f91a744db82b72c7f1fcb29aa0cc
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9e6b5e245533c9ea7bb8dc4f784a31fcb0da88bd
|
|
Calculate bihash buckets as n_elts / 2.5 rounded to closest pow2
per Damjan's recommendation. Remove memory configuration parameters
because bihash init ignores them anyway as it resides in main heap now.
Type: improvement
Change-Id: I189f463f3c4640106cce4f12d3c5a62969276a82
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: feature
Change-Id: I0db0a9b2f872753fa64d27335838cb34645a9ee8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
- we should not copy and iterate over the pool underlying vector, as
slots can be freed (ie in the freelist).
- delete interface instead of adding them again
- fix the log message
Type: fix
Change-Id: If0a7a2f475b4f40793eb29ea80a9d29fe5d1bcb9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Change-Id: I33c38c791cc9a28898de402ae831c4862073eb2d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
- use tunnel_encap_decap_flags to control the copying of DSCP/ECN/etc
during IPSEC tunnel mode encap.
- use DSCP value to have fixed encap value.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: If4f51fd4c1dcbb0422aac9bd078e5c14af5bf11f
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Icf0194f569da88f26a4cba29d8fe75a0bddfc144
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I58fb0e05f62eae45818c23e8e148ff6758ba463a
|