aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-02-14VPP-279: Document changes for vnet/vnet/devicesBilly McFall2-52/+210
Add doxygen documentation for pcap tx trace CLI command. In the process of adding the documentation, made the following changes to the way the command worked: * If there is an error with any of the attributes, the whole command fails. The existing behavior was to apply attribute by attribute, then bail if there was an issue, with partial apply. * Move the 'on' processing to the end. The existing behavior was to process the 'on' as it was encountered on the commandline. That meant that any attributes after the 'on' in the commandline were saved and displayed, but not really being used in the packet trace. * Enhanced the 'status' to show all the configured attributes. NOTE: The packet capture has some weird behavior with regards to how many packets are written to file and if the file is appended or overwritten. VPP-634 written to document the issue. Change-Id: Iab241228b125385052de242865afd9515fa2524f Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-02-14BFD: respect remote demand modeKlement Sekera3-348/+590
Change-Id: I5063d31f5305c848043afb32fcacff6e61aed79f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-14make test: improve stabilityKlement Sekera6-88/+149
Disable automatic garbage collection and run it manually before running each test case to minimize stalls. Improve vpp subprocess cleanup. Reduce helper thread count to one and properly clean that thread once it's not needed. Change-Id: I3ea78ed9628552b5ef3ff29cc7bcf2d3fc42f2c3 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-14BFD: set per session UDP source port per RFCKlement Sekera4-16/+43
Change-Id: Id294dbbd6499ae8221cc8143e1027adc08866ae6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-14Fix coverity issues: ioamShwetha Bhandari3-8/+15
Change-Id: I0963760a7da95612d5cab19596919b369a4d0f8e Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
2017-02-14Fix is_server flag in vhost dump (VPP-562)Marek Gradzki1-0/+1
Change-Id: I5b308eb39ae770d58d1498d7fafa49b236b3f534 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-02-14Fix typo in API warning message.Jon Loeliger1-1/+1
Change-Id: I51488620a7eeaf7a0edba71437d2b49ae3cf0bf5 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-14vhost-user: fix crash when descriptor points to unknown regionDamjan Marion1-1/+2
This happens only on when compiled for older microarchitectures, where BSF insutruction is used instead of TZCNT. BSF provides undefined result if operand is 0. Change-Id: I7a13350786a533428168595097ef01a560fde53b Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-14Update CSIT tests 170129 -> 170213Jan Gelety1-1/+1
- update of CSIT operational branch to be used for VPP-patch test Change-Id: I43cc99ea3ad6266b4792a7721968de89b7328306 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-02-13Out-of-tree Build Error fixAkshayaNadahalli2-22/+20
File vnet/fib/fib_urpf_list.h was included in vnet/fib/ip6_fib.h but was exported to be installed in /usr/include/vnet. So out-of-tree builds relying on an installed package was failing. Fix is to inlcude fib_urpf_list.h in source file rather than including it in header file. Change-Id: Iae39c1d9417dbd31ee67fa1bd2d1915d5e813c73 Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-02-13Augment IP_DETAILS, IP_ADDRESS_DETAILS with a few context fields.Jon Loeliger2-5/+15
When handling the IP_DETAILS and IP_ADDRESS_DETAILS replies, it is almost certainly going to require having both the is_ipv6 and sw_if_index context to handle them properly. Placing these values in an essentially global location as the current VAT does isn't thread-safe. Fruthermore, rather than forcing every API user to hoop-jump to establish these context values, simply provide them in their DETAILS reply messages. Change-Id: I6a9e0cb16ecdbf87fca8fc5c7663e98d3a53c26c Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-13Basic support for LISP-GPE encapsulated NSH packetsFlorin Coras28-22/+944
Change-Id: I97fedb0f70dd18ed9bbe985407cc5fe714e8a2e2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-13VPP-632 : InBand OAM AnalyserAkshayaNadahalli33-336/+2797
Refer to jira ticket for more details. Change-Id: I6facb9ef8553a21464f9a2e612706f152badbb68 Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-02-10Update plugin templatesDave Barach3-118/+106
Disguise the string "fd.io coding-style blah blah blah" to avoid spurious checkstyle failures on the emacs lisp code. DGMS. Change-Id: I6b88d9588dff7d67c6e509052ae4f32529684de7 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-09make test: work around scapy truncated packetsKlement Sekera2-0/+65
Under stress, it's possible to hit a race condition, when the packet header is fully written to pcap, but not all packet data - yet. Scapy is stupid enough to: 1. not detect and report this error, truncating the packet instead 2. continue munching more data from wrong offset The work around is to scan the file ahead, parse the packet header, figure out how much data we need, wait for the file to be big enough, then restore the file position back to where it was and finally let scapy parse the packet. Change-Id: I9fc71d3ebdc62ecab6c90b90f177d0eaeb09b8bb Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-09Improve MFIB doxygen helpNeale Ranns4-4/+12
Change-Id: Ie490b7fd5238cbad23f0199161cc14324fd9c554 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-08BFD: minor fixesKlement Sekera2-5/+3
Change-Id: I1c93f96a752eb2ffd1117a656552131cde1fa489 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08make test: BFD tests speedupKlement Sekera1-2/+4
Change-Id: I0b3064a311f28ebf7cd9db0a59cb04c7c25c9d58 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08BFD: modify session parametersKlement Sekera13-127/+601
Change-Id: I666e5c0cc71a3693640960c93cdd1907f84fbe23 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-08Fix source address reachability check for ip6 local packetsAkshayaNadahalli2-7/+26
Currently ip6 local check fails with error - source lookup miss if route to source of packet is over a dpo object such as load balance - recurssive route, tunnel adj - GRE, SR etc. So unless packet source is of a directly connected neibhor or has route with both interface and nexthop specified, it will be dropped. Fix is to check urpf list and if at least one link exists in the list, then allow packets to be processed, else drop. Change-Id: Id426311bb63bab506754a79409c602fdb6d0f190 Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
2017-02-07VPP-630: Null pointer dereferences in vlib/unix/plugin.cOle Troan1-1/+1
Change-Id: Iafb071c684a43e21925e3a43019cd86372347898 Signed-off-by: Ole Troan <ot@cisco.com>
2017-02-07Multiple platofrm support for dpdk/Makefile, fix optimizationsDamjan Marion4-78/+25
Using -march=native was causing SIGILLs on Atoms. Change-Id: I98c7fdaa139e3db70c972950dc9c167bf5803656 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-07Fix M(), M2() macros in VATFilip Tehlar1-2/+4
Change-Id: I76593632cde97f7cb80bbc395735404f39f3bd3f Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-07LISP: reject remote mappings that have as locators local IPsFilip Tehlar2-1/+29
Change-Id: Ifaf46554e45557ebf82009d9c46a9e905a46f884 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-06Add pool_get[_aligned]_will_expand(...)Dave Barach2-0/+67
Change-Id: Iefffcf7843dc11803d69a875a72704a2543911a1 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-06make test: improve test filteringKlement Sekera3-5/+81
Implement fine-grained test filtering by supporting more complicated filters beside the original file name suffix filter. Change-Id: If5a166d08cffe8c58cc6cf174e6df861c34dbaa6 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-06vlib: remove algned/unaligned buffers schemeDamjan Marion6-386/+57
Change-Id: I4433eaed3f4e201edc329c4842cbbf74beb19a9a Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-06make test: fix dependenciesKlement Sekera1-2/+2
checkstyle - doesn't need scapy/pexpect, remove it doc - scapy wasn't patched properly, fix it Change-Id: I65202cb14edeb239d21ce10f17d9b4fccce43d62 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-06SNAT: fix snat_add_static_mapping_command() uninitialized variableMatus Fabian2-5/+16
Change-Id: I7775dd3b90d5a3449650c3102e24bfedd770beb1 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-05SNAT: initialize outside and inside FIB index in snat_configMatus Fabian2-36/+5
Change-Id: If26d758997d71792cedad1afae8d6a38cfd364ac Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-05fix some 'stored but never read' warnings raised by clangGabriel Ganne2-6/+7
found by `scan-build make plugins-release` Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com> Change-Id: I52048e3a8ae3fb85eb3d91f6a5e15216dd7b9baa
2017-02-05Wheel-timer infraDave Barach8-0/+1289
Change-Id: I5499dd6b768425a56936afae50bd578620c83d30 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-05Test checksyle for IP mcast testsNeale Ranns2-3/+3
Change-Id: I20b61b7e63f74b4656d84717633e06646514c5eb Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-04dpdk: move to uio_pci_genericDamjan Marion6-27/+9
Change-Id: I3d8b7947ae6d721e9b514a59a7d2de49aed419b5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-03pg: add trace information for pg tx nodeDamjan Marion3-9/+46
Change-Id: I31730d58c34331f25f5b02cd065be94251f1302c Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-03vhost-user: fix missing speculative enqueue unwindSteven1-0/+4
Running trex in a VM with a bad config, trex sent a bogus pack from the VM to the Virtual interface. It caused a crash. Change-Id: I64d0197b444265553ab4c24f21e6a962e89cb587 Signed-off-by: Steven <sluong@cisco.com>
2017-02-03Fix CLI help message for set ip addressMatej Klotton1-1/+1
Change-Id: Ie39bb26a9aea88cf2768ec537adcdd8df1de3be0 Signed-off-by: Matej Klotton <mklotton@cisco.com>
2017-02-03pep8 compliance for test_ip6.pyNeale Ranns1-3/+3
Change-Id: If29a1eba3e7056903978de782c062589bec0137e Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-03Next node frame over-flow after replicationNeale Ranns2-6/+28
Change-Id: I25077dd0739787de4f7512e5a70a62e8c34c28e4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-03Plugin infrastructure improvementsDamjan Marion16-210/+367
This patch replaces requirement for vlib_plugin_register function in the plugin so file and introduces new macro: VLIB_PLUGIN_REGISTER () = { .version = "version string", .version_required = "requred version", .default_disabled = 1, .early_init = "early_init_function_name", }; Plugin will nor be loaded if .default_disabled is set to 1 unless explicitely enabled in startup.conf. If .verstion_required is set, plugin will not be loaded if there is version mismatch between plugin and vpp. This can be bypassed by setting "skip-version-check" for specific plugin. If .early-init string is present, plugin loader will try to resolve this specific symbol in the plugin namespace and make a function call. Following startup.conf configuration is added: plugins { path /path/to/plugin/directory plugin ila_plugin.so { enable skip-version-check } plugin acl_plugin.so { disable } } Change-Id: I706c691dd34d94ffe9e02b59831af8859a95f061 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-03SNAT: fix invalid outside FIB indexMatus Fabian1-0/+14
Change-Id: Ia5d3d81cbc2ef85fabf9e19c89a52c589a921d14 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-03SNAT: Port allocation per protocolMatus Fabian9-140/+242
Ports are allocated per protocol (UDP, TCP, ICMP) 1:1 NAT with port is configured for specific protocol Change-Id: I37ae5eed3715b223d0620d4fdaed7a482bb7a834 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-02Added support for openSUSEMarco Varlese1-1/+4
Change-Id: I64a0eeaa066adb70dfaeb33641d0336ddac18cf0 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2017-02-02Remove unnecessary block structure around CONTROL_PING messages.Jon Loeliger2-204/+168
Now that the M() and S() macros accept a message parameter, there is no longer a need to introduce a new block structure around the CONTROL_PING messages just to have a new unbound "mp" variable. Instead, just use one named "mp_ping" directly. Change-Id: I6b283562bb6eec25806e3d35c35b977680ecd1dd Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Refactor fragile msg macro W and W2 to not burry return control flow.Jon Loeliger13-577/+699
Instead, have them accept and assign a return paramter leaving the return control flow up to the caller. Clean up otherwise misleading returns present even after "NOT REACHED" comments. Change-Id: I0861921f73ab65d55b95eabd27514f0129152723 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Localize the timeout variable within the W message macro.Jon Loeliger12-231/+6
Rather than rely on an unbound variable, explicitly introduce the timeout variable within the 'do { ... } while (0)' construct as a block-local variable. Change-Id: I6e78635290f9b5ab3f56b7f116c5fa762c88c9e9 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Convert message macro S to accept a message pointer parameter;Jon Loeliger13-284/+295
Rather than blindly assume an unbound, fixed message parameter explicilty pass it as a paramter to the S() macro. Change-Id: Ieea1f1815cadd2eec7d9240408d69acdc3caa49a Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Convert M() and M2() macros to honor their second, mp, parameter.Jon Loeliger2-4/+4
Now that all the M() and M2() uses properly supply a message pointer as second parameter, fix the macros to use it. Change-Id: I0b8f4848416c3fa2e06755ad6ea7171b7c546124 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Ensure all M() and M2() second parameters are the message pointer.Jon Loeliger12-284/+285
Rather than maintain (?) an unused second parameter, t, and pull an unbound message pointer, mp, out of context, explicitly list the message pointer as the second parameter. Change-Id: I92143efda6211cdf6b935470f8c71579742a6b64 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-02Fix SR multicast post mfib commitNeale Ranns13-650/+508
1 - use the SR policy to construct the replicate DPO. Each bucket therein is a SR tunnel. 2 - install a special mfib entry that links via this replicate 3 - forwarding is now mfib-lookup -> replicate -> sr_rewrite (per-tunnel) no need for a separate sr_replicate node. 4 - Stack the sr tunnel on the forwarding DPO of the first-hop FIB entry. no need for a second lookup post SR encap. 5 - fix some path-list lock leaks in the MFIB entry. Change-Id: I20de96ea4c4be4fae252625bde159d9c435c8315 Signed-off-by: Neale Ranns <nranns@cisco.com>