aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14Prevent calling rte_eth_xstats_get not initialized devSzymon Sliwa1-0/+2
DPDK API forbids calling rte_eth_xstats_get on a port which has not been setup up yet. Citing the DPDK docs (reformated): " The functions exported by the application Ethernet API to setup a device designated by its port identifier must be invoked in the following order: rte_eth_dev_configure() rte_eth_tx_queue_setup() rte_eth_rx_queue_setup() rte_eth_dev_start() Then, the network application can invoke, in any order, the functions exported by the Ethernet API to get the MAC address of a given device, to get the speed and the status of a device physical link, to receive/transmit [burst of] packets, and so on. " original can be found here: http://dpdk.org/doc/api/rte__ethdev_8h.html#a36ba70a5a6fce2c2c1f774828ba78f8d Change-Id: I91854b8b0dd12dd028b4b36665cca49f16eac24c Signed-off-by: Szymon Sliwa <szs@semihalf.com>
2018-03-14IPIP: Add IP{v4,v6} over IP{v4,v6} configured tunnel support.Ole Troan23-1142/+2491
Change-Id: I166301c9e2388bae5f70ec0179d663a2703e27f5 Signed-off-by: Ole Troan <ot@cisco.com>
2018-03-14socket_test.sh: Don't hard code debug image with gdb.Dave Wallace1-3/+0
Change-Id: Idd6c175b9102c74621c027136ab4550821a23ecc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-14make test: handle multiple failures in one caseKlement Sekera1-1/+4
Change-Id: I5451ddec4bfdede12653415f90bf991e81494033 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-03-14VCL: Handle epoll HUP events in sock_test_serverDave Wallace1-1/+10
Change-Id: I7b13319228c498a565f8556b73628e7ff3b106c4 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-14srv6-plugins: fixing documentationFrancois Clad4-201/+254
Change-Id: I72439df585e56b3cbb7051f056fc35cddf0c864b Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14srv6: minor CLI modificationsFrancois Clad4-15/+14
'sr steer [...] via sr policy [...]' -> 'sr steer [...] via [...]' 'show sr steering policies' -> 'show sr steering-policies' 'clear sr localsid counters' -> 'clear sr localsid-counters' Change-Id: I0efbf38753a4bd0b7fba8cd08250e136e8e55199 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-03-14Improve l2_macs_events API to provide MAC move informationJohn Lo6-12/+31
Change mac_entry layout in l2_macs_event API message so the MAC entry can be either add, delete or move where the sw_if_index of an existing MAC entry changed. Also added a 8-bit flags field in mac_entry for any future expansion. Change-Id: I3bf9e1cf2556f2938202025a5d0772c2ce2fc99f Signed-off-by: John Lo <loj@cisco.com>
2018-03-14VOM: acl: Add support for acl ethertype unbind and dumpMohsin Kazmi4-1/+187
Change-Id: I667b9ccabe54c8f9cff5b1a2e63864965f5064f5 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-14At AF_PACKET socket create, do intf bind before rx ring cfg to avoid ↵Chaoyu Jin1-12/+12
receiving pkts from other interfaces Change-Id: Ie40ee9129edaac717e716b469f4d10f3c29a4932 Signed-off-by: Chaoyu Jin <chjin@cisco.com>
2018-03-13VCL: Fix race condition in event thread functionDave Wallace1-11/+17
Change-Id: I8586faee0b3a40932cd711b60cebe1a23ff82a56 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-13SCTP: data retransmission & snd_space fixMarco Varlese3-4/+88
This patch addresses two things: 1) The data retransmission which needs to be taken care of when the SCTP_TIMER_T3_RXTX; 2) The correct calculation of the amount of data transmittable considered: the local window, the peer window and any data inflight. Change-Id: I2d03a6cb43e4e7770c4910f8547c66e1026aeace Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-13Common form of fib-path reproting in dumpsNeale Ranns11-130/+338
Change-Id: I8f6fdbbeef2ac7e9fe5d87490ae5cba6e9a0b294 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-13FIB: DVR paths are not considered L3 attachedNeale Ranns1-0/+10
Change-Id: Ie473dca3264b480b007d2eb500aaa557b889c7c1 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-13libmemif: ubuntu 18.04 build fixJakub Grajciar4-15/+23
Change-Id: I6624cacd625eea6a9b8214f67d14ec162e2c0195 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-03-13Rationalize plugin symbol error reportingDave Barach3-5/+14
Change-Id: I64f2b2007f30fc1c6bd2990ba0d7ccbcd43cdb38 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-13SCTP: cumulative SACK fixMarco Varlese4-15/+44
A bug was found affecting the cumulative sending of SACK messages. Because the next0 was never assigned to the next_output the SACK message was never leaving the peer. Further, two new flags have been added to distinguish when a peer is AWAITING a SACK message (e.g. DATA is inflight and waiting to be acknowledged). Change-Id: Ibb5a98f7e5fed15cdc76710b74195cac031d59ed Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-03-12SPAN: Add 'is_l2" flag to DETAILS response messages.Jon Loeliger3-2/+7
Change-Id: I375bb0e663bc082d98a29fb101c653557ddc8f55 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2018-03-12Remove md5.[ch] from vppinfraDave Barach5-535/+2
Removed the sole use of it from ip6_neighbor.c Change-Id: Ie53cb3b6a3a41ec0917ec2042e5006d0cfaefc01 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-12License text cleanupDave Barach45-1/+589
Change-Id: I105375c653b1a1dce8f0f71005b281ff137c6f42 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-12NAT44: fix nat_not_translate_output_feature in dual loop (VPP-1194)Matus Fabian1-2/+2
Change-Id: Icb858414145db0e5fef495e155903b3b935e50ba Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-12NAT44: fix nat_not_translate_output_feature for ICMP (VPP-1191)Matus Fabian2-45/+49
Change-Id: I1552e1418b704fdf1f1fa2c0174313b9b82a37a3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-11vnet: l2-classify: prefetch (n+2, n+3) rather than (n+1, n+2) inside dual ↵Andrew Yourtchenko2-10/+10
loop code The dual loop within the L2 classifier processes the (n, n+1) packets, the prefetching was trying to prefetch (n+1, n+2) - thus half of the prefetches were not used - because the next iteration needs (n+2, n+3). Change-Id: I827d20845dbdd0dcdcf463ee25661a7921428992 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-11dpdk-input node packet trace intermittent on IP forwading pathJohn Lo1-36/+37
Packet trace initiated by dpdk-input node would occasionally not fully function if next node is ip4-input. Change packet trace saving order in the quad-loop so "sho trace" will display trace in packet receive order. Fold calling of vlib_trace_buffer() into dpdk_add_trace(). Change-Id: I9d7a9bf3b9391f95590e66150b26b0b15912d803 Signed-off-by: John Lo <loj@cisco.com>
2018-03-10Move the vnet cdp protocol implementation to a pluginDave Barach15-41/+574
Add a binary API and debug cli to enable/disable cdp. cdp is disabled by default. Change-Id: I307c7e38dfda38e36ff3325f65de7036c34d89b1 Signed-off-by: Dave Barach <dave@barachs.net>
2018-03-10Assign correct NUMA node for DPDK crypto devicesLee Roberts1-0/+29
DPDK rte_cryptodev_socket_id() is returning zero for QAT devices. Apply DPDK patch where correct NUMA node can be obtained with pci_dev->device.numa_node. Change-Id: I1c7a77bb13e2db8615189e97b67d68d043127787 Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-09Coordinate known Ethernet speeds with Linux kernel and DPDKLee Roberts5-6/+77
Linux kernel and DPDK recognize the following Ethernet speeds: 10M, 100M, 1G, 2.5G, 5G, 10G, 20G, 25G, 40G, 50G, 56G and 100G. Add consistent Ethernet speeds to VPP. Change-Id: I4cfcf378fb34425c1206db5aa2f6bdcc66e0a6ab Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-09Correct address calculation for VPP-1168Lee Roberts2-2/+2
Use (u64) cast to ensure proper address calculations. Change-Id: I6bad50010b140189f1b0af177e55da0045bd7a93 Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
2018-03-09VCL API for external callback for listener/connect eventKeith Burns (alagalah)7-23/+323
Change-Id: Ic59355683b581945d10a2df97d9b2deae87a998e Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-03-09dpdk: move DPDK vfio hack to dpdk pluginDamjan Marion4-50/+70
Change-Id: I806cbf8c6c49643fe6c317bcceab93c1b9d441ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-09make test: Force VCL test timeouts to FAIL test.Dave Wallace1-2/+8
Change-Id: Ie8d3bcb9021d9272bd27dba35d30e5081023f061 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-09VCL: add event registration to listen session in select()Dave Wallace1-5/+27
Change-Id: Ie2e8f4ec3a7ec1018e5f9ca6f28f8cb18beaa814 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-09when exceed max reass,ahdj0071-6/+12
frag packet can't get reass. adding bihash,it can rewrite new hash value. so need to delete hash after compare hash value. Change-Id: I83b5c47890110e9a598b78cfbe8fcd27bbe291bb Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
2018-03-09MPLS Unifom modeNeale Ranns47-1013/+2324
- support both pipe and uniform modes for all MPLS LSP - all API programming for output-labels requires that the mode (and associated data) is specificed - API changes in MPLS, BIER and IP are involved - new DPO [sub] types for MPLS labels to handle the two modes. Change-Id: I87b76401e996f10dfbdbe4552ff6b19af958783c Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-03-09ACL: Fix the detail for ethertype whitelistMohsin Kazmi2-3/+3
Change-Id: Ie8b4effbd25e1e26b625d451ec059bac58a5a5a1 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-03-08VCL event handling changesKeith Burns (alagalah)3-1/+27
- added vce_get_event_handler() - added check for event before blocking on mutex in vppcom_session_accept() Change-Id: I8e19ea5fcbaa40279cb28152b9923ca8f1328670 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-03-08tls: make tls engines pluggableFlorin Coras7-524/+814
- add infra for pluggable tls "engines" - makes mbedtls specific code a plugin Change-Id: I2c5b099e2b69d2be0038e3ef02b208ff907727e7 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-08VCL refactoringKeith Burns (alagalah)3-48/+55
- simplified event handling and unregister - removed fixed need to bit flip event hash key - added spinlock for client_session_fifo (was using sessions_lockp) - removed redundant vars Change-Id: I3c7645da660fb5560efdc4e9347e105df9650a16 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2018-03-08VCL: cleanup namespace_secret env-var cfg code.Dave Wallace1-20/+1
Change-Id: I9de8dd822494abe1b8701a72a9b8bede34dea8dc Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-08VCL: Add full hoststack test option to socket_test.shDave Wallace1-7/+72
Change-Id: I3e5e179daa9d6f1c46adb85b05dd810bdd312054 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-03-08acl-plugin: add the support for dumping the ethertype whitelist (VPP-1163)Andrew Yourtchenko3-1/+180
The gerrit 10434 which added the support for whitelist model on ethertypes, did not include the support to dump the current state. This patch fills that gap. Change-Id: I3222078ccb1839dc366140fa5f6b8999b2926fd2 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-03-08vppapigen: require reply/details messages for requests/dumpsMarek Gradzki1-6/+6
Throw exception if details/reply is not defined instead of logger warning. Change-Id: I6eb39c51eecca6521e5f563ba09dfd62311b45ec Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-03-07Fix Avoid crash in vnet_delete_sub_interface routineSteve Shin1-1/+2
vnet_get_sw_interface shoud be called after sw_if_index is validated. Change-Id: I36f1d90999c740803386404ba9b32703b659cd54 Signed-off-by: Steve Shin <jonshin@cisco.com>
2018-03-07fix physmem mappingsDamjan Marion1-0/+2
Change-Id: Ie0763e20c36a29a8ef866511903c85027dd133c3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-07features: extend 'feature node not found' warning messageDamjan Marion1-2/+4
Change-Id: I8f45fdb3865e2e0cbb5162ac622c07fec5e42b9d Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-07NAT44: allow to configure one interface only as output or input feature ↵Matus Fabian1-0/+12
(VPP-1192) following is not possible: set interface nat44 out GigabitEthernet0/3/0 output-feature set interface nat44 out GigabitEthernet0/3/0 Change-Id: I1592cc18390881fda66f98316700886b8f5295f0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-03-07GBP: fix the runs before statement against the ACL nodeNeale Ranns1-2/+2
Change-Id: I0ff13962ab6855663b9aec31c95e4a88cc809ff0 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-03-07packet-generator: use default free listDamjan Marion2-63/+8
Change-Id: I2a34546f9b32edc9bfb86b5492dde34aaef49ccc Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-03-07tls: enforce certificate verificationFlorin Coras11-169/+261
- add option to use test certificate in the ca chain - add hostname to extended session endpoint fields and connect api parameters. If hostname is present, certificate validation is enforced. - use /etc/ssl/certs/ca-certificates.crt to bootstrap CA cert. A different path can be provided via startup config Change-Id: I046f9c6ff3ae6a9c2d71220cb62eca8f7b10e5fb Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-03-07test: disable reassembly tests and system modification scriptDamjan Marion2-1/+0
One of basic requirements from day one for maek test is that it should run unpriviledged, so modifying system paremeters is unacceptable. Disabling script and reassembly tests as they need to be done in different way. Change-Id: I063c73eb82f2ebd7499e8adb1574a9fd2475fb5b Signed-off-by: Damjan Marion <damarion@cisco.com>