aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-09-16dpdk: add support for outer udp and ipv4 checksumsMohsin Kazmi4-16/+70
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I10141033030342881298d70742fa5bdea402b4c9
2021-09-16dpdk: fix the outer ipv4 checksumMohsin Kazmi2-0/+110
Type: fix Change-Id: Ibc476b807ba0310f0cc926b0e386831ef0cbcc25 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-09-16ip6-nd: add ip6-nd proxyMohsin Kazmi7-2/+639
Type: feature Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-09-15vlib: add option to plugin registration to prefer deep bindingDamjan Marion2-6/+7
Type: improvement Change-Id: I9ce7e1ee7e7afe8e9befe36ae8c59291beaaaf36 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-09-15tap: set device name on creation via TUNSETIFFDuncan Eastoe1-17/+8
Type: fix Currently when a new TAP/TUN device is created from tap_create_if() via the TUNSETIFF ioctl(), a name is allocated by the kernel (eg. tap0). If the caller supplied a name this is subsequently set via netlink, after the device has been created. Now we request the kernel to create the new device with the caller's requested name in the first instance, thus avoiding the need to rename the device, and therefore avoiding a window where the device exists with a different name. This can be beneficial, for example, when writing systemd-udevd link files [1]. Having the TAP/TUN devices created with the requested name ensures they can be correctly matched by the OriginalName option. Writing link files might be necessary, for example, to avoid VPP and systemd-udevd racing to set the MAC address on a newly created TAP interface. systemd-udevd can be configured to not manipulate the MAC addresses of matched interfaces. These changes also resolve an issue where the created device would not be renamed if the caller requested it be moved to a different network namespace, since vnet_netlink_set_link_name() was not called in that case. [1] https://www.freedesktop.org/software/systemd/man/systemd.link.html Signed-off-by: Duncan Eastoe <duncan@graphiant.com> Change-Id: I3d657632856d03979d6b914225c3c841c379e0a1
2021-09-14vlib: add graceful termination with statusPierre Pfister2-1/+12
This commit allows a non-VPP thread to request VPP to gracefully shutdown and return a specific process status value. Type: improvement Change-Id: I9bf52b789e7ee28eb272630eaea495fd94349f79 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2021-09-14misc: volunteer as extra maintainer for DPDKMohammed Hawari1-0/+1
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Change-Id: I97fa566612641f78c2e9850a251cfe9f2d7cfde1 Type: docs
2021-09-13interface: fix init fib_index_by_sw_if_indexNathan Skrzypczak13-69/+18
Type: fix The init of fib_index_by_sw_if_index wasn't setting default value to 0. Which we now need for setting interfaces unnumbered Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-09-13snort: fix epoll_wait unsigned return valueTianyu Li1-3/+9
When epoll_wait return -1, access array epoll_events[i] out of bound and lead to segmentation fault. 1. Change return value to signed return value 2. Skip non fatal error e.g. EINTR Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: I4ece118999402ec6054baf0efb52419151655def
2021-09-13tcp session: initialize sw_if_index at connect timeFlorin Coras5-12/+13
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id0e67a9ce9c5d8bca2cd7a30493f03a02a46dc46
2021-09-13dpdk: fix prefetch assert on ArmTianyu Li1-4/+4
CLIB_PREFETCH (cop[1], CLIB_CACHE_LINE_BYTES * 3, STORE); Note on 64 bytes cache line size arm machines, CLIB_CACHE_LINE_BYTES 128 CLIB_CACHE_PREFETCH_BYTES 6 above CLIB_PREFETCH () macro will be expand to ASSERT ((size) <= 4 * CLIB_CACHE_PREFETCH_BYTES); it will hit assert due to size (i.e. 3 * 128) > 4 * 64 Solution: Change to CLIB_PREFETCH (cop[1], sizeof(*cop[1]), STORE); Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Reviewed-by: Lijian Zhang <lijian.zhang@arm.com> Change-Id: Id0981fd5bd2b25ff71db4197b25578d0b7a9803e
2021-09-13ip: show ip table CLINathan Skrzypczak1-0/+77
Type: feature Thought this might be useful when using many VRF to get the list of allocated VRFs and corresponding names Change-Id: If9d2c6612d4215e7576315d66d1eb130fcecfa13 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-09-13build: verbose dpdk build requiring meson 0.55Nick Brown2-3/+11
allow verbose dpdk build to be enabled. Useful for tools, like debian blhc, that want to inspect build logs. The '--verbose' option to 'meson compile' requires at least version 0.55. Type: make Change-Id: I54e91298f632e2b91247680d9295701b05353abe Signed-off-by: Nick Brown <nickbroon@gmail.com>
2021-09-13ip-neighbor: Handle local MAC address change for incomplete adjacenciesNeale Ranns6-44/+80
Type: fix When the local MAC address of an interface changes the rewrite strings of all adjacency types need to be updated - this patch fixes the missing case of incomplete adjacencies. I moved the update of all adj types into the adj module, since if the complete adjs were done by the ip-neighbour module and incomplete ones by adj module, that would mean two walks of the adj DB, as it is not possible to walk only a specific type. UT is updated to include the missing case. Signed-off-by: Neale Ranns <neale@graphiant.com> Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com> Change-Id: I36af94976c645bdd0d4d3bc0093b24d7d077e9d7
2021-09-10vcl: avoid duplicated events in epoll ltliuyacan1-4/+6
1. Filter event ACCEPTED for lt (same as event RX) 2. Do lt check before vppcom_epoll_wait_xxx to avoid delivering duplicated events. Type: fix Signed-off-by: liuyacan <liuyacan@corp.netease.com> Change-Id: Ib41c880ceb5072d49e11ab42e31e54398703c0b5
2021-09-10vcl: fix free segments assertFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I837820fd1759cab55f42c54950e991a215234737
2021-09-09vlib: fix vlib_buffer_enqueue_to_next() overflowBenoît Ganne3-7/+32
vlib_buffer_enqueue_to_next() requires to allow overflow of up to 63 elements of 'buffer' and 'nexts' array. - add helper to compute the minimum size - fix occurences in session and async crypto Type: fix Change-Id: If8d7eebc5bf9beba71ba194aec0f79b8eb6d5843 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-09-09nat: Revert "nat: nat44-ed add session timing out indicator in api"Andrew Yourtchenko2-150/+1
This reverts commit f059a3452c285ec57a75c7b1ede5052244be4e5d, which broke the build. https://s3-logs.fd.io/logs/production/vex-yul-rot-jenkins-1/vpp-merge-master-debian10-x86_64/1344/console.log.gz Change-Id: I16fece8128fa9973495c587d105a8db57738e8f2 Type: fix Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-09-09srtp: fix header len assertFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie7b04b11987caadde0942483f171a318ce852228
2021-09-09nat: nat44-ed add session timing out indicator in apiAlexander Chernavin2-1/+150
Type: improvement Currently, NAT44-ED users sessions details are returned for both active and timed out NAT sessions. It may confuse users that expect to see only active sessions in the response and make them think that timeouts for NAT sessions do not work. With this change, introduce an indicator of timing out for NAT sessions returned in NAT44-ED user session details. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: Ib81ed90369d4b495117538f521e5112e289cf7e6
2021-09-09stats: revert enable/disable segments pollsRay Kinsella3-29/+16
This reverts commit 034bd1067eddb700c6d2bc67974056fe00012310. Type: refactor Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: Icce6052d6cf9616f7eac3185b4c9aace234aa59f
2021-09-09session: fix non-NULL terminated stringBenoît Ganne1-18/+7
vlib_unix_recursive_mkdir () expects a NULL-terminated C-string. Type: fix Change-Id: I412b48443d0792307d611c466747c0aa5e423417 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-09-09flowprobe: simplify test logicKlement Sekera1-55/+18
Type: refactor Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I9a3923ec1ff1371e870bc57ade4035de07bfbbcb
2021-09-09linux-cp: fix non-NULL terminated stringBenoît Ganne1-1/+1
lip->lip_host_name is a non-NULL terminated vector. Type: fix Change-Id: Ic154ad7f57f0b507204e55f78995cc0e89132e57 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-09-09linux-cp: Complete interface creation logicPim van Pelt6-86/+268
Linux Control Plane interface creation logic is currently only able to create untagged interfaces, and dot1q VLAN sub-interfaces. This change makes it possible to create dot1ad VLAN sub-ints, and Q-in-AD as well as Q-in-Q sub-interfaces as well. It makes the plugin a bit more robust by catching a few common errors, such as creating an lcp on a sub-interface without its parent having one, and creating an lcp on a sub-interface that is not exact-match. This change has a bunch of smaller improvemnets as well. I documented my work in this post: https://ipng.ch/s/articles/2021/08/12/vpp-1.html It shows that after the change is merged, all VPP interface types now create and operate cleanly as LCP interfaces as well. Type: improvement Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I322669f7316d44c227090b83d6a574fb9c00e76a
2021-09-08linux-cp: fix crash on failed vlib_buffer_copyPim van Pelt1-12/+24
Type: fix Signed-off-by: Pim van Pelt <pim@ipng.nl> Change-Id: I390282ecc63600728cf11413510c0169178e305c
2021-09-08vrrp: fix source address on advertisementsMatthew Smith1-2/+13
Type: fix Advertisements are dropped by anti spoofing check in some situations. When a VR has "accept mode" enabled, we must add the virtual IP addresses to the interface when the VR transitions to master state. When this happens, fib_sas4_get() starts selecting the newly added virtual IP address as the source address for packets sent on the interface, so advertisements are sent with that source address. When the virtual IP address is being used as a NAT pool address on a peer in the backup state, the peer sees the address as a local address and drops incoming advertisements with that source address. RFC 5798 section 5.1.1.1 says advertisements should use the primary IPv4 address of the interface they are being sent on as the source IP address. Since the virtual IP address is only temporarily added while the VR is in the master state, the virtual IP address should probably not be considered the primary address of the interface. The definition of Primary IP Address in section 1.6 says that selecting the first address is a valid selection algorithm. Do that instead of calling fib_sas4_get(). Change-Id: Id92f0e3237c7fd491dd8d695bb27307d494f8573 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-09-08interface: add custom interface name supportSteven Luong3-1/+100
add CLI "set interface name <current-int-name> <new-int-name> and the corresponding binary API to allow custom interface name setting for any interface. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I2b39da59879fd4526bcb5aa5854b6bd21e72ea73
2021-09-08perfmon: sort 'show perfmon bundle' outputZachary Leaf1-0/+11
This patch sorts 'show perfmon bundle' output in alphabetical order. Type: improvement Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: I26b379b5d6766b9f87f9a3a5013ea92b207fb5d4
2021-09-08interface: fix coverity issueMohammed Hawari1-1/+1
Change-Id: I5bb1ab3a57097bf03e7de5541cc8496655bc728f Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: fix Fixes: 5b22339973feaa3eba48ead1e9fb428b1816c0cc
2021-09-08perfmon: add membw-bound bundleRay Kinsella4-1/+80
Added memory bandwidth boundedness bundle, closely related to cache-hierarchy. This bundle works on ICX only, due to an ICX specific counter. Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: Id385bd5f4e645ac020774e311c623afb64b79b1e
2021-09-08perfmon: adding support for papi TMAMRay Kinsella4-54/+113
Adding support for Linux papi TMAM on Intel Snowridge. Adds the ability to indicate that a bundle should be thread or node bundle type based on available cpu features (rdpmc support). Type: feature Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: Ib871b2644fdb2410fbb580e0d21c3a8e2be13aba
2021-09-08nat: remove unusued parameters and use correct parameter typesKlement Sekera2-20/+15
Type: improvement Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I4f7b3d5354a7658d7271c28444f2f4641f05b28b
2021-09-08tests: fix DEBUG=attach multiple worker configKlement Sekera1-0/+3
Type: fix Change-Id: Ie7920c0c699904de0f68ddb749725887b569f295 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2021-09-08dpdk: fix coverityMohammed Hawari1-0/+2
Coverity does not seem happy about exotic control flows in switch/case statements Change-Id: Ie006190058f811aacf85125ebc58330d9c53510f Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: fix Fixes: 0b42ac565b970c186a9ad734f980b440f56fb25b
2021-09-07devices: restore regular af-packet tx pathMohammed Hawari2-21/+28
This change restores the af_packet tx path prior in use prior to Change Idf0bdd88990254a614962c2f7bc3e0292ccfd61a but fixes the stalling issue by ensuring that the next tx frame pointer is only incremented when a new tx frame is used. This change also enables the af_packet PACKET_QDISC_BYPASS option, for better performance. Change-Id: I65dde648ed66d21654847a900ceda5a8980ae6ec Type: improvement Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2021-09-07dpdk: lro supportMohammed Hawari5-19/+110
Change-Id: Ifa09dcdfd567ac3c2afab4bd3bd468260f766e1d Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Type: improvement
2021-09-07interface: full poll vector on adaptive modeMaxime Peim4-10/+42
When an input supports adaptive mode and enters in polling, some rx queues may be missing from the node's rx_poll_vector. To solve the issue, a full poll vector is being computed in vnet_hw_if_update_runtime_data, and returned by vnet_hw_if_get_rxq_poll_vector when the node is polling in adaptive mode. Type: fix Signed-off-by: Maxime Peim <mpeim@cisco.com> Change-Id: I249bcb20ae0dd28afb0a5ca32993092bafd2f6b1
2021-09-03sr: fixing typo in srv6 End.AS Proxy documentationAhmed Abdelsalam1-2/+2
Type: docs Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com> Change-Id: I0cbc1b21f156425e067e9ce90769a62983ca5d01
2021-09-02nat: NAT44 ED improvements and fixesFilip Varga8-392/+353
Fixed FIB entry per interface, pool and static mapping registrations in NAT control plane. Improved FIB configuration handling in NAT - added functions to generalize handling of FIB & NAT, cleaned up interface callback functions. Changed "is_" macros to inline functions for easier debugging. Type: improvement Change-Id: I68a17761a975dd819139ae94e52a8a85d3f27ffc Signed-off-by: Filip Varga <fivarga@cisco.com>
2021-09-01udp: fill rmt info if session is connection lessliuyacan1-1/+1
The app may send packet to different remote via sendto() with same socket (without calling connect()). In such scenario, remote address need to be filled in. Type: fix Signed-off-by: liuyacan <liuyacan@corp.netease.com> Change-Id: I49deb308668c05442f237e97acc9bfa239782482
2021-09-01vcl: ignore rx events for sessions in epoll lt listFlorin Coras1-2/+3
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I75f935cda00c335d0aefe02bff6fa8505dd931a8
2021-09-01classify: improve "show classify table" outputDave Barach1-5/+7
Print header for each table. Type: improvement Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I54ca04d6000a98afb4ad3d2f24caae3349548f23
2021-08-31vcl: switch part of the tests to sock apiFlorin Coras1-13/+47
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I427af3be604783d36080c284ed32fb1df525bf54
2021-08-31vlib: fixed the issue of vpp crash caused by interface up/downfangtong1-1/+1
When the interface status changes, the api of vnet_hw_interface_set_flags_helper calls the event processing function (vlib_process_signal_event_helper) for event processing. When the opinter data_vec is NULL, the _ven_len operation of an illegal address will cause vpp crash. Type:fix Signed-off-by: fangtong <fangtong2007@163.com> Change-Id: I7106b2aed7a1fc17f74bf6cb513912af97584f45
2021-08-31vmxnet3: set RX interrupt pending only when neededSteven Luong3-6/+59
When an RX thread handles more than one RX queue and has a mix of queues in interrupt mode and polling mode, the RX input routine is naturally in polling mode. In that case, there is no need to set RX interrupt pending when descriptor is available in the queue for interrupt mode. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iedbe57941eca3152c0e8ab9096cc81f315e0a915
2021-08-31vat2: coverity errors in print_templateOle Troan1-4/+19
Dereferencing null pointer fix. Add checking of return values for all calls in print_template() Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I00073b29ab2e76d5d06af9bd3f5ae2846de4d46d
2021-08-31stats: check epoch in python vpp_stats lsOle Troan1-0/+3
The VPP Stats Python binding was missing checking epoch. Resulting it would not pick up changes in the directory. Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I3226d71c77be2e80e24b5cd48fc9820833f7d30e Signed-off-by: Ole Troan <ot@cisco.com>
2021-08-31misc: fix build error in handoffdemoSivaprasad Tummala1-4/+3
fix to pass right arguments to vlib_buffer_enqueue_to_thread Type: fix Signed-off-by: Sivaprasad Tummala <Sivaprasad.Tummala@intel.com> Change-Id: I2521ac8d33135843263e8f99318988ec78effbaa
2021-08-31flow: add esp spi rss typePiotr Bronowski3-52/+69
Type: feature This patch adds IPsec ESP SPI as RSS key for better IPsec inbound processing scaling. With this feature enabled, The NIC will use the packets' SPI index as the RSS key to distribute them to different queues. The dpdk-input is also updated to support this feature. Sample CLI command to enable Ipsec ESP SPI as RSS key: test flow add src-ip any dst-ip any rss types esp test flow enable eth0 index 0 Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com> Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com> Change-Id: I8b7d01cfc065e9099fad33042ce76898e16ddbf0