Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ie915f7b0153bed2e603eedc642df852b85c8ad5c
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Change-Id: Ie8f6bb4fcd3e4fa269e86a77d2f21c87f372b783
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I518387ab479bee4778d45a33c95f7b0f72aa1b72
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
IP table mapping is set using 'set int ip table X Y"
Change-Id: I2adec40015f9281c9b00c55506000b322f42d91a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
format from hex representation
Even though the trace now prints the hex as well as human readable format for acl plugin,
it can be handy to have a separate function which allows to decode the hex. So add this debug CLI.
Change-Id: I1db133a043374817ea9e94ae3736b8a98630669d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
L2 Emulation is a feautre that is applied to L2 ports to 'extract'
IP packets from the L2 path and inject them into the L3 path (i.e.
into the appropriate ip[4|6]_input node).
L3 routes in the table_id for that interface should then be configured
as DVR routes, therefore the forwarded packet has the L2 header
preserved and togehter the L3 routed system behaves like an L2 bridge.
Change-Id: I8effd7e2f4c67ee277b73c7bc79aa3e5a3e34d03
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
* NAT46: fix test cleanup, missing del keyword
* NAT66: fix kube-proxy vip, is ipv6
* add some missing kp_put_writer_lock
* wipe flowtable after each unit test
* Add new cli api: "test kube-proxy flowtable flush" to flushes everything
* Call this new cli function after the end of each kube-proxy unit test.
* same as commit b3d1b203579226ca5136b9d6a2744577d07cfcc6 for the lb plugin
Change-Id: I4146f44841328ec96eb66729e3bae3d40f33e4aa
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Add API function which enables forwarding of packets not matching
existing translation or static mapping instead of dropping them.
When forwarding is enabled matching packets will be translated
while non-matching packets will be forwarded without translation.
Change-Id: Ic13040cbad16d3a1ecdc3e02a497171bef6aa413
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
CLI parsing code (unformat_fib_route_path) does not
recognise 'resolve-via-connected'.
However it understands 'resolve-via-attached'.
Change-Id: I57e5eb75199cb8ae72c0fc8642a41f042b022201
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Ibb6f450783d0ab64bd943c19f12d0954b0a94b24
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: I9341f1554d804dfeeecef656e59e8598704863dc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I5ecd43330b3329b072e6da62a4eed1641eb17f8f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0f8d2d9be78d4d936ed61538aee1b7207871347b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I61e6019ab34f52c82bf3f1e5327501a613f58bd9
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Translation of both source and destination addresses and ports for 1:1 NAT
session initiated from outside network (ExternalIP K8 use case).
Change-Id: Ic0000497cf71619aac996d6d580844f0ea0edc14
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ic1ab32c5df3f7a613fe0dcd6bfc15037fa2a008b
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I87e3de556910851d16af343bfcbede49500843ff
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I5dbd5e5673ecb0d3878053ae9985478740cf3bc6
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: I149a20f183b836db4c32fb4e4a8438b3a14c1c26
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Added Radu Nicolau as maintainer for
src/devices/dpdk/ipsec/ and src/vnet/ipsec/
Change-Id: If354344f5685ce0e431757768b77c4d5e8e409f9
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Set l_addr to the interface address if the interface address is known
when the identity mapping is created.
Change-Id: I61af0f5248c9d86d23a24457b342b2e1fb4ac726
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Icb931de82cb5969fa4976611629e2f882c720a99
Signed-off-by: Ed Warnicke <eaw@cisco.com>
|
|
This plugin provides kube-proxy data plane on user space,
which is used to replace linux kernal's kube-proxy based on iptables.
The idea is largely inspired from VPP LB plugin.
Currently, kube-proxy plugin supports three service types:
1) Cluster IP plus Port: support any protocols, including TCP, UDP.
2) Node IP plus Node Port: currently only support UDP.
3) External Load Balancer.
Please refer to kp_plugin_doc.md for details.
Change-Id: I36690e417dd26ad5ec1bd77c7ea4b8100416cac6
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: Iacfbaaa91ea8bd92790dec9fce567063bdbc5d64
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: Ib92794205027d3242c6f0c8962fe02ac38c7129b
Signed-off-by: Krishanpal singh <krish.singh03@gmail.com>
|
|
- update of CSIT operational branch to be used for VPP-patch test
Change-Id: I5ad0e36fa40095cc107a31b32dd2bbf936636dc4
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I0e20100c9e2ca4e951f605a79d48c04ff47864cb
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- GRE tunnels with the same src,dst addresses are not the same tunnel
- Two data-plane improvements:
- the cached key was never updated and so useless
- no need to dereference the tunnel's HW interface to get the sw_if_index
Change-Id: I2f2ea6e08c759a810b753cec22c497e921a2ca01
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This allows arm platforms to also take advantage of crc32 hardware
acceleration.
* add a wrapper for crc32_u64. It's the only one really used. Using it
instead of a call to clib_crc32c() eases building symmetrical hash
functions.
* replace #ifdef on SSE4 by a test on clib_crc32c_uses_intrinsics.
Note: keep the test on i386
* fix typo in lb test log
Change-Id: I03a0897b70f6c1717e6901d93cf0fe024d5facb5
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: I1699e440052faa317b06d46692e8656a41d21bfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Queue RPC calls and send them from the main dispatch loop. As things stood,
if the vpp main input queue filled, worker threads could enter a
barrier-sync spin-wait in the middle of processing a frame. If thread
0 decided to recreate worker thread data structures, the worker thread(s)
could easily crash.
Legislate the problem out of existence by enqueueing RPC messages only
from the main dispatch loop. At that point, doing a barrier-sync wait
is perfectly OK.
Change-Id: I18da3e44bb1f29a63fe5f30cf11de732ecfd5bf7
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ifa9966a27586a1a65038d069cf4a1e6e21a72d45
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Send packets to ip4/6_punt/drop nodes instead of error-drop/punt nodes
dbarach: clean up an annoying checkstyle issue: indent 2.2.10
(OpenSUSE version) and indent 2.2.11 (Ubuntu / CentOS versions) had an
artistic disagreement about ip_frag.c.
Change-Id: I660bee28a064af9c6c70371363081e941d1c3a94
Signed-off-by: Vijayabhaskar Katamreddy <vkatamre@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
same as commit d3e671e0dbb879d90f00bdee608ee0bb5f6357ae did for centos
Change-Id: If57765490d1ef41042a42db433b704af2f0c0ffd
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
- Fix broken unit test code.
- Check for NULL ptr in vppcom_session_attr()
VPPCOM_ATTR_GET_*_ADDR endpoint parameters.
Change-Id: I01169edce098ee855a9cba08893c2b08c93ea6c3
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Ic9c1c70e06b953538ed43fc91ed26b6be82ce812
Signed-off-by: Kevin Wang <kevin.wang@arm.com>
|
|
Change-Id: I465282e513b6a0482e96dd02fc7e0e4ed3e3731a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I941abdc4a02e4c52c66b9d299e380b27caca7c1d
Signed-off-by: “mystarrocks” <mystarrocks@yahoo.com>
|
|
Change-Id: I7ffaceb992d12fd255fe8a608b0493c2993c18c2
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: Ib3e25916c66fa3e1b082359095652c45d3b27d0f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I23081ea25a8d40d8ebe1fcb6efe4143e9c5a0fc6
Signed-off-by: Swarup Nayak <swarupnpvt@gmail.com>
|
|
Change-Id: Ib4012ff598698924484525932d041988cc4c63f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
New constructor can construct the l3 rule
using all or partial paratmeters.
Change-Id: I828ec1c4713decb5824e4a73c3692cebc2324cc2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I341f522b46dd85fb3b1dd43fd125513f16f89171
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Taken from DPDK, also AVX2 variant updated to be in sync with DPDK
version.
Change-Id: I8a42e4141a5a1a8cfbee328b07bd0c9b38a9eb05
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I097a738b96a304621520f1842dcac7dbf61a8e3f
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
"This time, for sure..."
Change-Id: Ie981003842d37c5eb6a0b2fe3abe974a93b86df8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Elastic Network Adapter PMD for newer AWS instance types
Change-Id: Ic7f6ac4a261ccc7af3ffb2ed8950274532e3feae
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
CIDs 180713 and 180714
Change-Id: Ia4856d1a62f176e99983f8c82eaa09d5df9d4ca5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I7196ad8bf6afaf356674789c05e23ac000bc038e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|