aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02Fix LISP Coverity warningFlorin Coras1-1/+1
Change-Id: Id1c3832609859ed004bacba0ced0d07dafd6c409 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-02VPP-648: CLI Memory leak with invalid parameterBilly McFall3-29/+88
After VPP-635 was merged, did one more pass. While the code was waiting to be merged, a few changes were merged to master with the same issue. This is a few additional changes addressing the same issue. See VPP-635. Change-Id: I7abeac5c260c1e2e9d9d318fd1aae24cd6932efc Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-03-02BFD: command line interfaceKlement Sekera15-191/+1659
Implement command line interface to the BFD binary APIs. Add corresponding unit tests. Change-Id: Ia0542d0bc4c8d78e6f7b777a08fd94ebfe4d524f Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-03-01dpdk: be a pluginDamjan Marion43-1585/+838
Change-Id: I238258cdeb77035adc5e88903d824593d0a1da90 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01vppinfra: fix issue when copying 16 bytes with clib_memcpyDamjan Marion2-0/+10
Current code wos copying same data twice when length is 16. Change-Id: I8d935b32f61672aaea9789c097a5083ae8f78cdd Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01Initial Release notes for 17.04.Ole Troan1-0/+20
Change-Id: I91a38fe02646438a0cdad92cbb66342a437e8ff9 Signed-off-by: Ole Troan <ot@cisco.com>
2017-03-01Add MAINTAINERS fileDamjan Marion1-0/+158
Change-Id: I67819c72a5b3de7bcc7d55ab34f0c95f947578e9 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-03-01VPP-598: tcp stack initial commitDave Barach94-512/+17375
Change-Id: I49e5ce0aae6e4ff634024387ceaf7dbc432a0351 Signed-off-by: Dave Barach <dave@barachs.net> Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-03-01Fix buffer template copyDave Barach2-5/+30
Change-Id: If451c9cb68719fc816999b0330b9be3a0169176a Signed-off-by: Dave Barach <dave@barachs.net>
2017-03-01devices: vnet_get_aggregate_rx_packets should not be dpdk specificDamjan Marion10-53/+59
Change-Id: I1152db4b7d1602653d7d8b2c6cb28cf5c526c4ca Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28dpdk: retire support for dpdk 16.07Damjan Marion17-41890/+3
Change-Id: I8585552c026415340fe9fd0458cb8450da3c4ae2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28Clear L2 output config on interface mode change to L3 (VPP-651)John Lo1-4/+11
With VPP-651, the L2 output config with L2-tag rewrite was not cleared when a sub-interface is deleted. Subsequently, when the same sw_if_index was reused for another interface, the L2 output config with L2-tag rewrite remained on the new interface. On deleting a (sub-)interface which is in L2 mode, it will be changed to L3 mode first to clear any L2 config. The L2 to L3 mode change path did address L2 input config cleanup. It is now fixed to also clear L2 output config. Change-Id: I3352a89d92e1b27340a5adcf75bbaa01a5050c29 Signed-off-by: John Lo <loj@cisco.com>
2017-02-28vlib: add buffer cloning supportDamjan Marion8-265/+256
Change-Id: I50070611af15b2b4cc29664a8bee4f821ac3c835 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-28Fix warning in generated codeDave Barach1-4/+14
Change-Id: Ie56fca84a8a0ed77ee480e8078e6e9b3f4cef105 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-28Trace plugin binary API message range allocationDave Barach2-8/+89
Change-Id: I544a5d2906548607b69f999567b92f802fddddbb Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-27BFD: disable debug printsKlement Sekera1-1/+1
Change-Id: I356581f4bdf47b9610b9e50f4f8db9a1510872a7 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-27vlib: add VLIB_BUFFER_EXT_HDR_VALID flagDamjan Marion4-5/+4
Change-Id: If56c66dd12eded1cc997087de5fd1b975766c4e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2017-02-27[Proxy] ARP testsNeale Ranns5-0/+587
Change-Id: I40d6d763b55a26cdee0afef85d1acdd19dd10dd6 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-27Add GPE CLI/API for setting encap modeFilip Tehlar8-4/+319
Change-Id: Id89e23fb5d275572b2356c073dfa0f55719e1a76 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-27fix:vxlan mcast adj - added as ucast dpo adjEyal Bari1-1/+1
Change-Id: Ic2447313075cd46f265202dffaaac894f48ddf6d Signed-off-by: Eyal Bari <ebari@cisco.com>
2017-02-26Load plugins in alphabetical orderDave Barach1-9/+55
API traces contain absolute message numbers. Loading plugins in directory (vs. alphabetical) order makes trace replay fragile. Change-Id: I46b3a3b6a9843a383d42269fca0cf5a789486eaf Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-26BFD: echo functionKlement Sekera12-367/+1319
Change-Id: Ib1e301d62b687d4e42434239e7cd412065c28da0 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2017-02-25Add NSH to GPE decap pathFlorin Coras5-20/+56
Change-Id: I97681322fa9ca81736100b4d32eab84868886c7b Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-25MFIB: changes to improve route add/delete performanceNeale Ranns3-7/+12
Change-Id: I063d85200d12b09545ae1c373c7fc69112ae3b34 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-25Enable tests with VRF resetJan Gelety1-37/+73
- needed to filter out ICMPv6 Neighbor Discovery - Neighbor Advertisement packets - needed to reset routes of reset VRFs learned from ICMPv6 Neighbor Discovery - Neighbor Advertisement packets after run_verify_test() Change-Id: I8238d8f73428d511ab68ab7765d99ce7dc3a6633 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-02-24FIB: 1) fix pool realloc during prefix export. 2) don't walk off the end of ↵Neale Ranns3-7/+31
the path-extension vector Change-Id: I8bd8f6917ace089edb1f65bd017b478ee198c03f Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24VPP-650: handle buffer failure in vlib_buffer_copy(...)Dave Barach4-10/+63
Change-Id: I6aac48d780fcd935818221044eae50067f225175 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-24Fixed QAT device binding and device unbinding when vpp package is removedRadu Nicolau3-3/+3
Change-Id: I35ad6a42093cad0945df1df09a39c63c4560dce6 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-02-24MFIB memory leak. free the per-source interface hashNeale Ranns3-6/+3
Change-Id: I0ccb337eb0ed50ccc64193533cd816f6e36e6db5 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-24VPP-279: Document changes for vnet/vnet/devicesBilly McFall2-100/+617
Add doxygen documentation for dpdk CLI commands. Outside of adding documentation to the CLI Commands, modified the CLI code as follows: * The "set dpdk interface placement" command allows the user to move interface/queues to a different thread. But there is only a subset of threads that are valid. Updated the "show dpdk interface placement" command to display all valid threads, even if all interface/queues have been moved off. Updated the "show dpdk interface hqos placement" the same way. * There is a command to modify the Subport attributes, but no way to display the changes. Added a "Subport" section to the "show dpdk interface hqos" command. * Reworked the "set dpdk interface hqos subport" command. - The current implementation had a local rte_sched_subport_params structure and initialized it to default values, then overwrote with what was input. The side effect of this is that if all the current data is non-default, and a new command is entered with just one attribute, all the remaining attrbutes are getting set back to default under the cover. Very confusing for the user. Updated the code to read the current value and overwrite what has changed. - DPDK does not have a read subport data, so no way query the current applied values. The set command was not updating the local copy that is created at init. Modified the code to store the updated values if the DPDK apply function was successful. - Several functions repeated the same code to get a pointer to the local HQoS data. Added a utility function.get_hqos(..), to perform this action. Did not port other code to use new function. * The "set dpdk interface hqos pktfield" allows the user to set the packet fields required for classifiying the incoming packet. The classification is across three fields (subport, pipe, tc). The command was using 0,1,2 to represent these three fields, but had no explanation regarding these magic numbers. Updated the command to take the three tokens (subport, pipe, tc) for more clarity. For legacy sake, still allow 0,1,2 to be entered. Also updated the "show dpdk interface hqos" command to show these tokens. * The "set dpdk interface hqos tctbl" maps an interface and value 0-63 to a traffic class and queue. The "show dpdk interface hqos" command showed the internal DPDK magic number for traffic class and queue. Updated the show command to display what was input instead of the magic number. * The "show dpdk hqos queue" command always returns zeros by default because RTE_SCHED_COLLECT_STATS is not defined in DPDK. Took me a while to figure out why I wasn't getting values returned. So returned an error message if RTE_SCHED_COLLECT_STATS is not defined instead of zeros. Change-Id: I22b640d668245839ee977ef3602175c61d91d24c Signed-off-by: Billy McFall <bmcfall@redhat.com>
2017-02-23Fix vpp built-in version of api_unformat_sw_if_index(...)Dave Barach3-19/+36
Change-Id: I103fe19a1ecbaf3746ec6b957fa1010458cc9fae Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-23Remove prints from LISP testFilip Tehlar1-5/+0
Change-Id: I2776e0a0661794b1c0076519b08807080a1282fb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-22Clean up "binary-api" help string, arg parse bugsDave Barach2-2/+8
Change-Id: I12311be8ebd376b8aeac25364d010d70a85c7874 Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22Fix LISP and ONE crc marcosFilip Tehlar4-11/+27
Change-Id: Icd0dba04d8929456228136d1f25c459bffcc6a7a Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-22Support multiple plugin build in the sample-pluginAnlu Yan3-18/+52
This follows the setup in the src/plugins directory, and allows multiple plugin build independent of the main vpp source tree. Change-Id: I9e20f4087d72ad89c6dc3f505bace4628385a40e Signed-off-by: Anlu Yan <ayan@cisco.com>
2017-02-22VPP-635: CLI Memory leak with invalid parameterBilly McFall37-576/+1487
In the CLI parsing, below is a common pattern: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else return clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); } unformat_free (line_input); The 'else' returns if an unknown string is encountered. There a memory leak because the 'unformat_free(line_input)' is not called. There is a large number of instances of this pattern. Replaced the previous pattern with: /* Get a line of input. */ if (!unformat_user (input, unformat_line_input, line_input)) return 0; while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT) { if (unformat (line_input, "x")) x = 1; : else { error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); goto done: } } /* ...Remaining code... */ done: unformat_free (line_input); return error; } In multiple files, 'unformat_free (line_input);' was never called, so there was a memory leak whether an invalid string was entered or not. Also, there were multiple instance where: error = clib_error_return (0, "unknown input `%U'", format_unformat_error, line_input); used 'input' as the last parameter instead of 'line_input'. The result is that output did not contain the substring in error, instead just an empty string. Fixed all of those as well. There are a lot of file, and very mind numbing work, so tried to keep it to a pattern to avoid mistakes. Change-Id: I8902f0c32a47dd7fb3bb3471a89818571702f1d2 Signed-off-by: Billy McFall <bmcfall@redhat.com> Signed-off-by: Dave Barach <dave@barachs.net>
2017-02-22jvpp: remove unnecessary msg_id_base cachingMarek Gradzki11-178/+90
Jvpp code uses CRCs to obtain msg IDs. Checking api_main_t.msg_index_by_name_and_crc is enough to detect API mismatch. Calling vl_client_get_first_plugin_msg_id is not needed. Also fixes VPP-627. Change-Id: Ie3085dfa458795fa11f17615ac94e76197a1c8cd Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2017-02-16Consolidate DHCP v4 and V6 implementation. No functional change intendedNeale Ranns16-960/+851
The DHCP proxy and VSS information maintained by VPP is the same for v4 and v6, so we can manage this state using the same code. Packet handling is cleary different, so this is kept separate. Change-Id: I10f10cc1f7f19debcd4c4b099c6de64e56bb0c69 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-22Add ref to test framework docs in doxygen output.Dave Wallace3-7/+14
Change-Id: If3081c4a9dde00cd522d1fc5a7daa9b1849684bf Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2017-02-22fix trace frame-queue unformat of indexMatus Fabian1-1/+1
Change-Id: Id891af5ef3c4afe877282b34cd03fc43886940a3 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2017-02-22Fix last run time update for timer wheelFlorin Coras1-1/+1
Change-Id: I9ac04b15440297c154ed1e3fba888915044cb245 Signed-off-by: Florin Coras <fcoras@cisco.com>
2017-02-22Repair SNAT's IPFIX and IF-add-del test functions.Jon Loeliger1-2/+2
Inspection shows that the names of two functions: api_snat_ipfix_enable_disable() api_snat_add_del_interface_addr() don't match their bodies and have been swapped. Make the world right again by swapping them to match. Change-Id: Ieefd7f0fdbf52794e8649b0cbbcf6e1403c1b90a Signed-off-by: Jon Loeliger <jdl@netgate.com>
2017-02-21Add Overlay Network Engine APIFilip Tehlar8-212/+4068
Change-Id: I6b5984df176688f0722a2888e73f05d8ed8b9310 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-21dhcp: multiple additionsNeale Ranns15-854/+978
DHCP additions: 1) DHCPv4 will only relay a message back to the client, if the Option82 information is present. So make this the default. 2) It is no longer possible to select via the API to "insert circuit ID" - since this is now default 3) Remove the version 2 API since it's now the same as version 1. 4) Adding the VSS option is now conditional only on the presence of VSS config (not the 'insert' option in the set API) 5) DHCP proxy dump via API Change-Id: Ia7271ba8c1d4dbf34a02c401d268ccfbb1b74f17 Signed-off-by: Neale Ranns <nranns@cisco.com>
2017-02-21cryptodev: Automatically download and build ISA-L Crypto libraryRadu Nicolau2-2/+21
Change-Id: I5454053461e6fb98e7f58f9562efde3590bb7cb5 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2017-02-21Add basic 4o4 LISP unit testFilip Tehlar5-1/+646
Change-Id: I2d812153d7afe7980346382b525af89b3c47e796 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-21test: ip6 vrf instances multi-context test (CSIT-497)Jan Gelety4-7/+424
- add/delete IPv6 VRF instances and verify results by parsing output of ip6_fib_dump API command and by traffic - small changes in assert_nothing_captured and get_capture to get logged unexpected packets Change-Id: I32207447be2df942e335aa9890ff52fb88e46597 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2017-02-21Rename LISP GPE API to GPEFilip Tehlar11-153/+147
Change-Id: I133c55bce46d40ffddabbbf8626cbd3d072522d4 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2017-02-21VPP-540 : pbb tag rewrite detailsPavel Kotucek7-82/+200
Extended sw_interface_dump to provide 802.1ah (pbb) tag rewrite info if present. Extended log "l2-output" to provide raw data to display result of prospetive pbb tag rewrite. Tracing is moved after l2output_vtr to show these changes. Change-Id: I8b7cb865dc67ce21afab402cc086dac35f7c0f07 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2017-02-20Update CSIT tests 170213 -> 170220Jan Gelety1-1/+1
- update of CSIT operational branch to be used for VPP-patch test Change-Id: I815b3ef67f1664f72f68984087413f4c4985f694 Signed-off-by: Jan Gelety <jgelety@cisco.com>