Age | Commit message (Collapse) | Author | Files | Lines |
|
... by removing duplicit test cacses.
There is little value in testing ESN flag when no integ algo
is used. This patch removes such test cases.
Type: improvement
Change-Id: Iae5baa1d39ac32a65d1d28ad57771a87962d8bb3
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This patch fixes 2 different crashes:
1) BN_bn2bin() returns bytes written, not actual key length. Use
BN_bn2binpad() instead which adds padding.
2) Initiator may receive multiple sa-init responses for the same ispi
which may result in crash. Remember first response and ignore any
subsequent ones.
Type: fix
Change-Id: Ia1eac9167e3100a6894c0563ee70bab04f6a5f4f
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Change-Id: Ibc65d739583dc11735f993f4c7e7ee6d3c8f5b0a
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Change-Id: I746b94f494d059d2db5f47638c9f4e6bc4eb4045
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: If4dee6dba1ea942daa921d566b35cdecdda680ee
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0884bf63db57b4b4dbccf41ab64c030b3fe4dde2
|
|
Change the CLI keyword from address to prefix in sr localsid command.
Type: feature
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Icc3072404a106ab40e829d2d291e5c179a4443a8
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: fix
it was marked MP safe in the CLI (which it shouldn't be) but
it it not marked MP safe on the API.
Change-Id: I4bdea498a510a8b406d13d62a899b6d03656f7e8
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I172d3d907f324d8cb21e73aa08ef66da029ed365
|
|
If buffer alloc fails, it may happend that rx queue will be stuck
as old code only refills if at least one packet is received.
Type: fix
Change-Id: I388c4f8a9fb2c208bdc222e31b443cbe6b94af82
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I021b1427362f4bdba1c0ebc9863c9143dd6b3cb7
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Before this patch, packet was dropped in ip4-input,
but ip4-map-t node dropped response due to
'security check failed'
This patch checkes if hop_limit==1 and sets error
and next frame and sends icmp6 response correctly
Type: fix
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I85a6af58205b05754ef8c45a94817bb84f915c85
|
|
Type: fix
Change-Id: I95d3f8431b468cefc8777526dd3b988a299f0687
Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0875705d3a0c95f2781b0595ef27a30486438aae
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iec5db8dcf3a019b731e15fd79d0208d6eb10943b
|
|
Translation of ICMPv6 error messages to ICMP error messages fails
because the sender port is not set that leads to securtiy check
failure.
With this commit, during ICMPv6 error messages translation, get the
sender port value from the inner packet.
Type: fix
Change-Id: I1ee295a3685fab4837172edfb629a699f49afbee
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Change-Id: Id20a0fe77372602fd211156ccee01c18d829d8df
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I3b0041d72d835cbb11e803cc56ac4c68a68238a0
|
|
Type: style
Change-Id: Ie81eb7e3d872923daaa8ae8dad060a4da85349c5
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
This reverts commit c2c1bfd9b72aec88526c06479b128725eb525866.
Reason for revert: Seems it's breaking ipsec esp tests
Type: fix
Change-Id: Iac590eee23cbf92a10c62dafa789aa9c3b2284dd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Fix global copyright date
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I7f010d63ec010982f2c8c8388f14214fa6ced0a7
|
|
Fix for the coverity issues.
Type: fix
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I6bf8a874a9a94b9b7d62da047a401eda8a448567
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I3c348ad2fca8bb3d9a246af7a2aa9dc9c33f57c3
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
This fixes a special case when buffer chain enters decrypt node
and becomes a single buffer after decryption.
Type: fix
Change-Id: I1d4da029b952baa97400adb7173aa63fd97d916b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
If "no-tunnel" error erises, you will not see it in the "show errors"
output because the packet will be punted. That fact complicates
troubleshooting.
Type: improvement
Change-Id: Ic08347f81131a4a73a05b66acbfb02797373f5ab
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Turn on gso, turn off both indirect and mrg_rxbuf caused traffic received
and sent with checksum error. The problem is we are not mapping the hdr
correctly in the shared memory address.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I7ef3bc2755544167b0e624365988111b17399e89
|
|
Type: fix
Change-Id: Ib320171708bebde6d1dae0b2c665f9bcfc9102db
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I134465760272ceb29f85486cba838d8687696bbf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: docs
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: If842c92183a9cf4b5a9773dced3298005b327e1a
|
|
This issue is observed with X520-2 NICs on FD.io lab Taishan server.
After VPP booting up and bringing up the interfaces with command "set
interface state <interface> up", it still shows link down status from
the command "show hardware-interfaces". However, the hardware link
status is actually up. dpdk_process() cannot get the hardware link
status correctly via rte_eth_link_get_nowait().
In ixgbe_dev_link_update_share(), if the media type is fiber and the
link is down, a flag (IXGBE_FLAG_NEED_LINK_CONFIG) is set. A callback to
ixgbe_dev_setup_link_alarm_handler() is scheduled trying to set up the
link and clear the flag afterwards.
If the device is started or stopped before the flag is cleared, the
scheduled callback is canceled. This causes the flag to remain set and
subsequent calls to ixgbe_dev_link_update_share() return without trying
to retrieve the link state because the flag is set.
When the callback is canceled by either interface start or stop
operation, in ixgbe_dev_cancel_link_thread(), after cancelling the
callback/thread, unset the flag on the device to avoid this condition.
Type: fix
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
Reviewed-by: Jieqiang Wang <Jieqiang.Wang@arm.com>
Change-Id: I04de377dc048307a78a5b7109ebdfaf376d5e029
|
|
Fix libffi package name for Ubuntu 20.04
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Idc567717494b4c40c307f20a40d5e10cd26b0a46
|
|
Fix the following issue.
1. The localsid length was not stored in sr localsid structure.
2. SRv6 mobile test cases were modified based on the new sr localsid CLI syntax.
Type: fix
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: Ieb7620c35439e90a599802a7e0dba61a39707349
|
|
Support the following new features in srv6-mobile.
1. GTP4.DT
2. GTP6.DT
3. User Plane Message encoding based on draft-murakami-dmm-user-plane-message-encoding-01
4. Add SRv6 mobile test cases
Type: feature
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I890e5171bf03513d54b4830f01b9dc7f47fe7c48
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
|
|
Type: fix
Change-Id: I1ba921503a41ca37ce5c920682893617740571a9
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
|
|
Type: improvement
Change-Id: If1164d2eb81e9d4748436cb1bb8b164857d70565
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Show encap-vrf-id instead of fib-idx. When a tunnel is created, you
specify encap-vrf-id, hence it makes sense for the show command to
present it the same way. Fib index, on the other hand, is the internal
artifact of how IP tables are managed; showing it isn't helpful.
Type: improvement
Change-Id: I8d1713d6727dd8685d6c10c07f421c18edafa6e0
Signed-off-by: Nick Zavaritsky <nick.zavaritsky@emnify.com>
|
|
Type: fix
Signed-off-by: Jan Cavojsky <jan.cavojsky@pantheon.tech>
Change-Id: Ic6c15c88c80c4045c290cd78533be6f070c7470a
|
|
When profiling VPP with MAP (a software profile suite on Arm CPUs, see details in
https://www.arm.com/products/development-tools/server-and-hpc/forge/map) on Arm
servers, VPP will receive SIGPROF signal because MAP uses SIGPROF signal to drive
its sampler to do profiling on VPP. However, the default action of SIGPROF signal
handler in VPP such as unix_signal_handler() is process termination. To profile
VPP with MAP, the SIGPROF handler should be left as default, and MAP sampler will
overwrite it with its own implementation.
Type: feature
Change-Id: Ie14e513d35ec27a66e95067689408bad8ed1ad6b
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Right now even following configuration fails:
cpu {
corelist-workers 0
}
I think we should allow user to use CPU 0 if he explicitly
configured it or as the last automatically assigned core.
Type: improvement
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I041c30349bace558c673475e9a0cffccae5821f7
|
|
Right now following configuration leads to crash:
cpu {
corelist-workers 2
workers 2
}
because threads count will be set to 2, but we have only
one core in coremask.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: Ia93b892733971e7c8ddfceaaec5f4eb8bf9063ac
|
|
Type: fix
Change-Id: Ic6457da31846721e334f144f15d404575eeb73e5
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
"set int state <interface> down" puts the virtio device link
down. It will not put the link in "UP" state, when
"set int state <interface up>" will be used again to change
the interface admin up. This patch fixes it.
To test:
create tap
set int state tap0 up
set int state tap0 down
sh hardware
sh int
set int state tap0 up
sh int
sh hardware
Change-Id: I3c0e31539f8a2a1e40220e7fb57eedecf408f067
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: Ifee2b3dca85ea915067b9285e3636802bf0c19a8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Some vhost-backends give used descriptors back in
out-of-order. This patch fixes the native virtio to
handle out-of-order descriptors.
Change-Id: I57323303349f6a385e412ee22772ab979ae8edbf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
On SMP architecture, '/sys/bus/pci/devices/<devices id>/numa_node' file
will return -1 as a valid value if it does not have any NUMA node information.
Using -1 as a valid node id to access data structures will cause memory issue.
Fix the error by setting the value of numa_node to 0 if '/sys/bus/pci/devices/
<devices id>/numa_node' returns -1 and it is a SMP system.
Type: fix
Change-Id: Ib60e79c3656fe5b17e08fd9011122683e8b08b6f
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6ce6fb0fe0ceb8a70b6a13e6a72fdb842bfded7a
|
|
Type: improvement
Change-Id: I09b017d60bc38ff8a4a7a73aff42b27611bd8955
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: I45c6f434065ab0ad8ada3184b5a875a32a1b3faa
|
|
Type: fix
Signed-off-by: Jawahar Santosh Gundapaneni <jgundapa@cisco.com>
Change-Id: Ife0f7749a72cc834a3d811f8cf6b5a0840157014
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I6b2c7550ae5918c27b02b1173533d2042c6c15c7
|