Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I6e43953a6ad1bd672e69d8377d18bd9614b469d8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Current mlx5 requires libmnl, and SUSE has a bug which
installs the header file in incorrect location.
Workaround (from upstream) is to use pkg-config.
Change-Id: Iadfd2dc0df211876258c31da028af2e8934483b3
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
0x00007ffff670da53 in cj_dump_one_record (r=0x7ffff50f0fec)
at /home/sluong/vpp3/vpp/src/vlib/unix/cj.c:138
138 (long long unsigned int) r->data[1]);
(gdb) p *cjm
$1 = {tail = 58645908, records = 0x7fffb64646ec, num_records = 512,
enable = 1, vlib_main = 0x7ffff6953240 <vlib_global_main>}
(gdb) p /x cjm
$2 = 0x7ffff6953880
(gdb) p /x *cjm
$3 = {tail = 0x37edd94, records = 0x7fffb64646ec, num_records = 0x200,
enable = 0x1, vlib_main = 0x7ffff6953240}
(gdb)
cjm->tail is a 64 bit counter, not the total number of records. Dumping from
0 to cjm->tail can be a very large number of records which go beyond the
limit. I believe we meant to dump from 0 to index. index has been set by
this statement
index = (cjm->tail + 1) & (cjm->num_records - 1);
Change-Id: Ie1a8ba757598de9757accc1488577c15aa49726b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I3a47c71ad3e35df47d11fed6db95019a45f3015f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Thanks to Damjan for rewriting my previous patch into
not-to-be-deprecated soon form!
Change-Id: I595a13c44ed07d4c6d60e2aef0f0bd807a76cbba
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Patch to fix a bug in the ENA PMD on starting a port that
had previously been started and stopped. There was a
failure to allocate descriptors on start because they had
been allocated during the initial start and not released
when the port was stopped.
Issue reported/tracked at
https://github.com/amzn/amzn-drivers/issues/86
Change-Id: Id9c8d598929f0561788b985011fe5dea8f4a21a5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ia108b0359cb2dc4ba2e773117ee7134274a98056
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I49cb5863237e4f9d2ac94879577d5d011e3bfe97
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4ebd977672090f2a7fc08bb139832df39614564a
Signed-off-by: Scott Keeler <skeeler@cisco.com>
|
|
Some L2 traffic requires promiscuous mode enable on the interface
Change-Id: Icbb2792aaf0d9d1c51373e46ae5049ff0d986863
Signed-off-by: Steven <sluong@cisco.com>
|
|
This reverts commit 71615399e194847d7833b744caedab9b841733e5.
There seems to be an issue with ARPs when running with multiple workers.
Change-Id: Iaa68081512362945a9caf24dcb8d70fc7c5b75df
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Without pagemap access only way to do DMA to physmem is by
using IOMMU. In such case VFIO will take care for preventing
paging of such memory so we don't need to lock here.
Change-Id: Ica9c20659fba3ea3c96202eb5f7d29c43b313fa9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
I was expecting "%4d" format string to exhibit the same behavior as
the one in C standard library, but rather than specifying _minimal_
width and expanding as necessary, it actually truncates the output.
Changing that to "%9d" should take care of pushing this surprising
difference in behavior into the domain of impossible.
Change-Id: Ia687137ca765bf9c1575af998ff11314010e81ad
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Avoid possible null pointer dereference
Change-Id: If8023edb43aaf037234f4a7b5f191cb23b09c74d
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ie7827b6a31968a355687d27325c0f30cab1bc890
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: If570bb8cc19b2eab5877a20c963e27e410ee7560
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic69a68665dcff4e4d48803b634aa2cf234c3944b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I91c9d040fc9b9b63f7109eeaac334c47fb1226cf
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Iad2ddf63116a6f477c6106a3e045fe36f34bc062
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: Iecceffe06a92660976ebb58cd3cbec4be8931db0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixed consistancy between the first classifier match and the
next_table_index classifier matches:
- CLASSIFY_ACTION_SET_METADATA was applied only for the first
classifier, but it was not applied for the other classifiers
- Actions should be performed only for input ACLs
- Payload should point at the IP header for output ACLs
Change-Id: Ifbd7791756320ae3198520c41902f5e99e3d40b4
Signed-off-by: Gregory Thiemonge <gregory.thiemonge@enea.com>
|
|
Change-Id: I010528055b9d0597b087882146496eacc13b7daa
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Adds tx pacing infrastructure for transport protocols that want to use
it. Particularly useful for connections with non-negligible rtt and
constrained network throughput as it avoids large tx bursts that lead to
local interface tx or network drops.
By default the pacer is disabled. To enabled it for tcp, add tx-pacing
to tcp's startup conf. We are still slightly inefficient in the handling
of incoming packets in established state so the pacer slightly affect
maximum throughput in low lacency scenarios.
Change-Id: Id445b2ffcd64cce015f75b773f7d722faa0f7ca9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
frame->frame_flags
Change-Id: I56b573b5da04a27766bcbcafbd5438555424f2e7
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
According to the RFC 4096 (section 3.3.1) the DATA chunk needs to be
padded to a boundary of 4 bytes with zeros. This patch addresses that
requirement.
At the same time, this patch takes care of adding some hardening for
corner-cases where the transmitted tag could be wrong.
Change-Id: I3b653926e9933d0d3d46bc5f37eaceefd932e874
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
The license issue is resolved, so we can package the .json
files. Added to the vpp-dev package in .tar.xz form, which saves a lot
of space.
Updated the perfmon error log entry: tell folks where to find the
compressed tarball, and how to extract it.
Change-Id: I3ed351fbf154cc3ba22d5f9c666acff77a2a14cf
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I88577615bfd3cddca834a7b881979ab32bfd5574
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Abstracting out the internal format function
for L4 session key type makes the other
acl plugin format/print functions more maintainable.
Change-Id: Ica1302263a42981555462b5338d18d9a9f9c8342
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ia6cadec8117d2cc35c9329910bb403bcd1b048ce
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Few devices provide PCI bar region(s) through I/O.
If any such device driver opens I/O "fd" to read and write,
needs to close it, when pci device is going to be deleted.
Change-Id: Iba104e56f76c6bf9ccd27bf2223bad39b1301763
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ib5c346641463768cf33eaf8cb5fab5b63171398d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I5ef9ecd741f1623ae1b7a23fa0a4fa6db7e243a3
Signed-off-by: Scott Keeler <skeeler@cisco.com>
|
|
multiarch support: change autotools -> cmake
getting a patch reviewed: improve patch conflict resolution section
Change-Id: I2f07e1d3f21dd8cefb4d4bb3b451965d9314211a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I5ff713ad0b254c74c5622e3b9425cca365b5ee97
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Save a few cycles on every rx and tx burst call by not compiling
in support for DPDK Rx and Tx callbacks. This feature is optional
and unused by current VPP code.
Change-Id: I1916bc8822e2bd405c1ac3909e85467a01023862
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: I09cf6ee7b4874d71f293f8f1a426d3a5e9651749
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1f58f441c65fbca101bee2e864bfa6ae2306b475
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I20f2fb14e00f3e7e96774959a4bf1a159ab9030f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ie9ff9b751190632dfc4576e5cbb1987a4142af5e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Added/tested additional cpuids from our testbed.
Change-Id: Ifd3ea9e8e8231a8901966903bf5eceb635b82482
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I8bf411adc6c5f4caa349d161174b544d2de3ad1d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Patch is too large to be ported to 18.10 just days before release.
- handle fast retransmits outside of established node and limit the
retransmit burst size to avoid tx losses and worsening congestion.
- in the absance of a tx pacer, use slow start after fast retransmit
exists
- add fast retransmit heuristic that re-retries sending the first
segment if everything else fails
- fine tuning
Change-Id: I84a2ab8fbba8b97f1d2b26584dc11a1e2c33c8d2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icb8172238f735fd0825e474e16a006f1435e175c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7030951215f0cf7d00c037892ac92d9c304cb5a1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9d96e7782a12c2e19eacbb75edb1fb450cf33bed
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: If36be24fa08e21c7718a1dced506a7f254dfb5cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
if udp length is specified, then use this length to calculate udp checksum
otherwise, use length from vlib_buffer
Change-Id: I5304a60d5d429993d0524b864b65ec503775412d
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
In DPDK 18.11 the device flags for keeping/stripping CRC flags has
changed. The old strip flag is gone, and replaced by a CRC keep
flag.
Change-Id: Iaa162854862a2a0855b418ee8029383fc116d3a2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
The function dpdk_ipsec_process() attempts to initialize some
globals that store node indexes after looking up the node
dpdk-esp6-decrypt. No such node was declared, so a segv
occurs after dereferencing the result of the lookup.
Add a node function that invokes dpdk_esp_decrypt_inline()
with is_ip6 set to 1. Add a declaration of node dpdk-esp6-decrypt
that uses the node function.
Change-Id: I31ce23a458c2d4181bf40cbc2118c4ef3b9baf97
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|