aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-07-17VOM: support for pipesNeale Ranns84-316/+978
Change-Id: I5c381dfe2f926f94a34ee8ed8f1b9ec6038d5fe2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-07-16Adjacency-BFD: assume BFD down on createNeale Ranns2-10/+17
Change-Id: I13279a1a96df457209fb25748a643c01b18ff4e0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-16acl-plugin: fix coverity errors 186574,186575,186576,186577,183451Andrew Yourtchenko1-20/+1
Fix the copypaste-triggered errors in load-from-file ACL test code. Also, add an explicit exit(1) after clib_error() to convince coverity that code path is terminal indeed. Change-Id: I1deedb49144559c9183449005ada0433c24db18a Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2018-07-16vppinfra: AVX2 interleave functionsDamjan Marion1-3/+14
Change-Id: I8688f700fccd87484da3e202ca3a070cc14eb267 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-16Enable openssl TLS async support in client for HW acclerationPing Yu1-0/+15
Change-Id: I003e41786c549c6451a1e9e178f5871d32c20e6e Signed-off-by: Ping Yu <ping.yu@intel.com>
2018-07-15VPP-1341: fix loopback interface graph arcsDave Barach4-66/+175
Remove broken special case from l2_input.c:set_int_l2_mode(), which turns out to confuse the graph dispatch engine. The loopback TX function needs to push packets to either ethernet-input or to l2-input, based on bridge / BVI configuration. Rather than overloading a single graph arc - and making vain attempts to reconfigure it - create both arcs and use the correct one. Rewrote the loopback tx function as an idosyncratic multi-arch quad/single loop fn. Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-14Improve IP4 ARP and IP6 ND Events Notificationv18.10-rc0John Lo2-11/+32
For L2 ARP termination, use both brodcast ARP request and reply packets to provide MAC/IP binding events. For IP4/IP6 neighbor adress resolution, send resolution events if there is an address resolution attemp with a static neighbor entry where both IP and MAC matches. This allow probe of an IP neighbor with a static entry to confirm it is responding with a reply matching that of the static entry. Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f Signed-off-by: John Lo <loj@cisco.com>
2018-07-13Add QEDE poll mode driver (librte_pmd_qede)Igor Mikhailov (imichail)3-4/+10
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA) (doc/guides/nics/qede.rst) Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-07-13srv6-as: Adding support for L2 trafficFrancois Clad4-38/+442
Change-Id: I72978c5957cb1acf154c9de7ad153092bac37785 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-13srv6-as: Adding test casesFrancois Clad1-0/+692
Change-Id: I597a88d255c2f7cff552b1fa12ed4a7c4579b91c Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-13vppinfra: add missing header file to install listDamjan Marion1-0/+1
Change-Id: I1f82c40f9f927296d5d439b0db70a70ef803cf3c Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-13Improve the "show version" commandDave Barach1-5/+82
Add "show version cmdline" to display the command line Add doxygen tags to the source code Change-Id: I0205b373062fd88f176d9c8086d89d7784a5172f Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-13VPP-1338: fix ipsec api coverity warningsDave Barach2-12/+7
Remove useless unsigned comparisions: "(unsigned) value < 0", correct a couple of incorrect limit checks. Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35 Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-13The gateway IP should be 172.16.2.1shenJibiao1-1/+1
Change-Id: I28d05a04abd11f630035d34ce573016c77ffab53 Signed-off-by: shenJibiao <shenjibiao@corp.netease.com>
2018-07-13STATS fix memory leak in stat_client.cDave Cornejo1-0/+3
continue statement in case bypasses cleaning up of unserialized node Change-Id: I0103d31df2eed3ed04d7cdcdfb790f4d9a376336 Signed-off-by: Dave Cornejo <dcornejo@netgate.com>
2018-07-12Fix debug CLI node recycling bugsDave Barach1-5/+26
When creating a new - as opposed to recycled - debug CLI process node, perform a proper barrier sync and node runtime update. Otherwise, the graph replicas diverge for some period of time. That's not immediately fatal, but it's not a good idea, either. When renaming a debug cli process node, fix all of the name-vector replicas before freeing the [one-and-only] name vector. This fixes the so-called stats segment node runtime scraper crash, which tripped over a replicated dangling reference to the recently-freed debug CLI node name. Change-Id: Ieffabd9f003139e534b9d79b88370439907930e5 Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-07-12Revert "vppinfra: AVX2 blend"Dave Barach1-6/+0
Causes clang validation failures. The patch did not actually pass validation; unfortunately it received a +1 from fd.io JJB - presumably due to a race condition This reverts commit 779c865cc6c7af5bb435d8b3465d80685370edb2. Change-Id: Ica3697f8f90e67d3eae4debc597f27d7d512004a Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-07-12srv6: fix pointers in quad loopsFrancois Clad1-6/+6
Change-Id: I51c4bcbd456d2e7ffbdeef9cc8c7703d1c88b52e Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-12IGMP: validate the packets length in the DPNeale Ranns3-25/+55
thanks to coverity... validate that the length of the packet on wire matches the size of the header based on the number of groups and sources. drop those that don't match. Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-12stats-segment: add startup node serialization optionFlorin Coras2-1/+7
Node serialization is turned off by default. To enable it do: statseg {serialize-nodes on} Change-Id: I53bba3cab517bd3ba90eba52d94b3ebb16870141 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-12vppinfra: AVX2 blendDamjan Marion1-0/+6
Change-Id: Ie7a64318f10ebb535c98aff4e25cdfc48f60ff33 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11session: push tx notifications only if neededFlorin Coras2-1/+12
VPP-1340 Change-Id: Ia3f2fc054dbfb2ba912a768c70466e7042024e32 Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-11Documentation: Placeholder directory and filesEd Kern1-0/+56
This adds the directory sphinx and sphinx/docs as well as two matching placeholder files. These are being added now to facilitate some gerrit triggers Change-Id: I0e6e7607c5ae5cdbf05718b95b1d299178544485 Signed-off-by: Ed Kern <ejk@cisco.com>
2018-07-11avoid using thread local storage for thread indexDamjan Marion57-98/+99
It is cheaper to get thread index from vlib_main_t if available... Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11bridge-domain:fix no_flood countEyal Bari1-0/+3
no_flood count was not updated on removal might couase a negative insertion index when adding new members Change-Id: I2caf2c453dfef1a9f16fb8fa2e5af42b4e653a69 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-11memif: fix max number of ringsDamjan Marion3-5/+5
Change-Id: Ie7621a38a44e7c692e23e58c43d27d8d2aab43e6 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11avf: descriptor should be volatileDamjan Marion4-40/+60
Change-Id: I2cb4cf2167b6e958d2e57b461848a4a189e3fda0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11srv6-as: Adding rewrite countersFrancois Clad3-21/+72
Change-Id: I57f1db6fabfdb8ddfba514ad754707b24d47c962 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-11srv6: Fixing SRH parsing bug in Scapy 2.4Francois Clad1-0/+28
Change-Id: Ib2cb345d07665735697bf54ad48d353ba4112eda Signed-off-by: Francois Clad <fclad@cisco.com>
2018-07-11VPP-1338: fix coverity warning in mactime pluginDave Barach1-1/+3
Add missing VALIDATE_SW_IF_INDEX macro / check. Net of this fix, a spurious warning will probably recur. Coverity will complain that sw_if_index is tainted. Please dismiss the warning. Change-Id: Iec31ce1d86f742e197e63b0c5d474cd5e496ee5f Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-11vom: Add TAPv2 supportMohsin Kazmi11-176/+383
Change-Id: I1fff014dd7d8a66ed3cb063e8c996de4f7e745c2 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-07-11threads: fix issue with setting main-core to 0Damjan Marion3-9/+17
Change-Id: Id3ccfcfa2a88cf7aa106f1202af7cd677de32575 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-07-11make_test: Add missing classifier testsJan Gelety3-126/+1294
Jira: CSIT-1172 Change-Id: I04e726aab97efb96ed835d2a6db293a2acab0add Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-07-10VPP-1337: Dangling reference be gone!Dave Barach3-0/+6
Freeing the prefix and address vectors after signalling them from dhcpv6_client_node_fn to either the pd or iana report processes is absolutely wrong. The code has appeared to work by luck. This took three full days' worth of expert effort to root cause - in the context of an unrelated patch - and about one minute to fix. Change-Id: Ie589ab1a70ae83441ab4e8b6618a6d405741f53f Signed-off-by: Dave Barach <dave@barachs.net>
2018-07-10IGMP: coverity found defectsNeale Ranns3-4/+10
Change-Id: Id6aba75c30712e9a0ac7b3075bd6cfc49d6bec36 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-10FIB path dump: fix next-hop-table ID for recursive routesNeale Ranns3-6/+9
Change-Id: I57b4ebca29c0b185770373e8878f89a9bd13b742 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-10NAT44: multiple outside FIB tables (VPP-1314)Matus Fabian5-62/+620
Change-Id: I56eb15f8fd2d3049845287dc3df7870582764f8b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-07-10openSUSE: spec file update to reflect latest depsMarco Varlese1-5/+13
Change-Id: I3c04956400a2e88d331f43d1b4865ee2c75e7bc9 Signed-off-by: Marco Varlese <marco.varlese@suse.com>
2018-07-10Remove unused variablesIgor Mikhailov (imichail)1-4/+0
Change-Id: If4da80c7eefe55905594eaaba0946d75f0892da5 Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2018-07-10Do not translate packets destined for NAT64 inside interface (VPP-1331)Juraj Sloboda2-2/+89
Change-Id: Ieb8020f57ed5ad20daf552cd62ae3fdd8c573926 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-07-10pp2: increase recycle batch sizeBrian Brooks1-1/+3
Increase batch size when recycling buffers. This increases Mpps by 7%. Change-Id: I2a460611d9c36e9bf087b076fc4e187acf61108f Signed-off-by: Brian Brooks <brian.brooks@arm.com>
2018-07-10pp2: use configured RX queue sizeBrian Brooks1-1/+1
Change-Id: I5e5b2dd4f4bc3e257824015c723228ac5128d6a0 Signed-off-by: Brian Brooks <brian.brooks@arm.com>
2018-07-09IGMP improvementsNeale Ranns44-2005/+4672
- Enable/Disable an interface for IGMP - improve logging - refactor common code - no orphaned timers - IGMP state changes in main thread only - Large groups split over multiple state-change reports - SSM range configuration API. - more tests Change-Id: If5674f1044e7e97274a711f47807c9ba689d7b9a Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-09vxlan:use bihash_16_8 for ipv4 lookupEyal Bari4-71/+81
Change-Id: I0d4630c88d6caacffcd073ebaa12766dfc893f70 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-07-09new pipe code does not use stdintsNeale Ranns1-2/+2
Change-Id: Idee565af852c7bb434b886fbf31c6e76315686c4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-07-09Fix missing pipe.api.hMatthew Smith1-1/+2
Errors occur when building a library outside the VPP source tree that uses the shared memory API because vnet/devices/pipe/pipe.api.h is not installed but is included by vnet/vnet_all_api_h.h. In src/vnet.am, Add vnet/devices/pipe/pipe.api.h to nobase_include_HEADERS. Change-Id: Id3dc28d90f41bb0ff576736f9d77bee19a2b8fdd Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-08Fix IPsec intf tx node setup at intf creationMatthew Smith1-2/+2
When using a DPDK cryptodev with IPsec, sending outbound packets results in a crash on division by zero if using an algorithm not supported by the OpenSSL ESP nodes. This includes AES-GCM and MD5. At IPsec intf creation time, the next node at slot IPSEC_OUTPUT_NEXT_ESP_ENCRYPT for ipsec_if_tx_node_fn is set to the node named esp-encrypt. This is the OpenSSL ESP encrypt function. If DPDK cryptodevs are configured, dpdk-esp-encrypt is the correct next node. Change to setting the next node according to the value in ipsec_main.esp_encrypt_node_index. That value is set to esp-encrypt by default. If DPDK cryptodevs are configured it gets set to dpdk-esp-encrypt. Change-Id: I83896c76b975d74aead247a162c85eccca9575a8 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-08ixgbe link update patch for DPDK 18.05Matthew Smith2-1/+14
Add patch for DPDK 18.05 that was previously applied to DPDK 18.02.1. Issue with ixgbe on x550 SFP+ still exists. Bug report submitted to DPDK: https://bugs.dpdk.org/show_bug.cgi?id=69 Change-Id: I9b005709ddf2a72192b1288ba8b4bac85bf12685 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-07-08session/svm: fix coverity warningsFlorin Coras2-3/+10
Change-Id: Ic5daed1f6c23d9561a04e235dcbf257f190d066a Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-07-08vhost: Add multi-versioning supportMohsin Kazmi7-1536/+1675
It also refactors the vhost code which was in one big file vhost-user.c. Receive side code is in vhost_user_input.c and Transmit side code is in vhost_user_output.c Change-Id: I1b539b5008685889723e228265786a2a3e9f3a78 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>