Age | Commit message (Collapse) | Author | Files | Lines |
|
Add missing cli options for setting IPsec SA flags, inbound,
use-anti-replay, and use-esn.
Type: fix
Change-Id: Ia7a91b4b0a12be9e4dd0e684be3e04d8ccafb9d4
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
This patch aims to improve decap performance by reducing expensive
hash_get callings as less as possible using AVX512 on XEON.
e.g. vxlan, vxlan_gpe, geneve, gtpu.
For the existing code, if vtep4 of the current packet match the last
vtep4_key_t well, expensive hash computation can be avoided and the
code returns directly.
This patch improves tunnel decap multiple flows case greatly by
leveraging 512bit vector register on XEON accommodating 8 vtep4_keys.
It enhances the possiblity of avoiding unnecessary hash computing
once hash key of the current packet hits any one of 8 in the 512bit
cache.
The oldest element in vtep4_cache_t is updated in round-robin order.
vlib_get_buffers is also leveraged in the meanwhile.
Type: improvement
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: Junfeng Wang <drenfong.wang@intel.com>
Change-Id: I313103202bd76f2dd638cd942554721b37ddad60
|
|
The protocol value was changed to 50 and 51 (rather than 0 and 1), but
the custom_dump function wasn't updated to reflect this. Also the is_add
value wasn't being shown. Fix both these issues.
Type: fix
Change-Id: I429b4616d6c7937f73308b644154370fab32eaae
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
"clear counters" is not appropriate for a protocol to own. Change
to "clear l2tp counters" (and "test l2tp counter").
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: I3faac3907c4697c1c95df34ac7d31e48063869a8
|
|
Scenarios where SIGHUP is sent would include the user closing an xterm
while in interactive/nodaemon mode, or similarly when running vpp in the
same mode during testing (e.g., using ssh to run VPP on a DUT). VPP
should exit in these cases; however, generating a core is unwanted.
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: Ibccfe5e676547e913c8a205ff16ab56d9abb1c82
|
|
Type: feature
This adds api calls for the following CLIs:
* set sw_scheuduler worker <N> crypto on|off
* set crypto async dispatch polling|interrupt
* set crypto handler
* set crypto async handler
Change-Id: Ic701d149c440e42ea4575da42b9f69e4c8759602
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: feature
This patch adds new sw_scheduler async crypto engine.
The engine transforms async frames info sync crypto ops and
delegates them to active sync engines. With the patch it
is possible to increase the single worker crypto throughput
by offloading the crypto workload to multiple workers.
By default all workers in the system will attend the crypto
workload processing. However a worker's available cycles
are limited. To avail more cycles to one worker to process
other workload (e.g. the worker core that handles the RX/TX
and IPSec stack processing), a useful cli command is added
to remove itself (or add it back later) from the heavy
crypto workload but only let other workers to process the
crypto. The command is:
- set sw_scheduler worker <idx> crypto <on|off>
It also adds new interrupt mode to async crypto dispatch node.
This mode signals the node when new frames are enqueued
as opposed to polling mode that continuously calls dispatch node.
New cli commands:
- set crypto async dispatch [polling|interrupt]
- show crypto async status (displays mode and nodes' states)
Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com>
Signed-off-by: DariuszX Kazimierski <dariuszx.kazimierski@intel.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: I332655f347bb9e3bc9c64166e86e393e911bdb39
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4b132cad8ff906ef24846cc43935ccfd6aa7b4ec
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I436741e061f11685980a71fb3989befc7af1e081
|
|
Let twice-nat static mapping pick specific
address from the twice-nat pool.
Type: improvement
Change-Id: Iadaa036af2fa3b0e6e9a68ff6e68b4bbe1650eb1
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: fix
adding routes should be MP safe. When new prefixes with differrent
prefix lengths are added, adjust the sorted list in an MP safe way.
Change-Id: Ib73a3c84d01eb86d17f8e79ea2bd2505dd9afb3d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Signed-off-by: yedonggang <yedg@wangsu.com>
Change-Id: I3bf67070ed01df40626f3b90f2762158b6c3ce05
|
|
gso option is available for the debug CLI version of bond create.
This patch is to create a new API to have the corresponding option in
the binary API. The old binary API bond_create is marked deprecated.
Type: improvement
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id9501b8e6d267ae09e2b411957f181343da459c0
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7228a01d38e61cc00358419b2512ca0da4f76ff5
|
|
Type: improvement
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I841f4407ed8c1a448e5102059fc79ae1f7d461de
|
|
Type: fix
Change-Id: I2b6b7b6f28cbf7accf883743e390b0031dd13bbb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ia1276d00dded36ee28b4b2e93b4cc7c1df6b1eef
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I95d7fc1cc8db5199570c66535f45e867a7cae676
|
|
error on Centos 7
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: Ic47f5e8627923c951333c70004850b53ed4cab06
|
|
Type: feature
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I3e00deb94943c545d1649865b2efdf7d51b90f4d
|
|
Type: feature
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: Iec28fb11b6edff1bee23117f56aa3a3e5729541a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: Ia28161b583ea26ab820a494332a79b64add7004d
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I8d55c2bfdd3c4607044370ebabf40cbac78b4996
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
Change-Id: I12b08333f3f69aaa882e8801f4f69bca2d7bd558
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I4930c3c2a8025ec9ceb17e994137be67d88d455f
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
enum bar_enum {
BAR1 = 0,
BAR2,
BAR3 [backwards_compatible],
BAR4 = 9 [backwards_compatible],
};
This allows adding backwards compatible (as guaranteed by the developer) enums.
The enums marked backwards compatible are not considered in the CRC calculation.
Type: improvement
Change-Id: I6fc0c21b19e1a02cff7f5d279a0f3a32d2f8b630
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Change-Id: I3697cf7fab7abb7c3d2f61ef326c9116bc1eed66
|
|
In one's complement, there are two representations of zero: the all
zero and the all one bit values, often referred to as +0 and -0. See
RFC 1624 section 3 for more details.
This used to be taken care of in ip4_header_checksum(), but it is no
longer the case. The check ip->checksum == ip4_header_checksum (ip) is
no longer correct in the -0 case.
Always use ip4_header_checksum_is_valid() instead (which behaves
correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4).
Type: fix
Fixes: e5f0050c7a5d411f96af6401797529d58825e2af
Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: I87c6f423ea8fdd9fb764693055eb1509f994d6f1
|
|
Type: improvement
Change-Id: Ie063ee0a0c59a9ad632200ce2b23703bc0d936e6
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Adjacencies are only defined for IPv4 and IPv6.
Type: fix
Fixes: 20aec3db441074ee5a861a40d6e02fad2f3dcb37
Change-Id: I19b2b7f6958da49f41c6eabc9f248840769acbbb
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Hitting a code not reachable when setting
BIHASH_KVP_AT_BUCKET_LEVEL = 1
Change-Id: I24d539df67ae7650a3b1969f5709a6f7366d786b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: I5287f6326726780c09e515eede0992bafb413bb2
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
It is cheaper to include checksum field in calculation and simply
compare result with zero.
Type: improvement
Change-Id: I6f77632c0a4d2f2c632d044d3a5d2fcf2b5bac62
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Translation memory size is internally a uword, but in api it was u32,
resulting in the returned value being 0 all the time.
Fix the "incorrect" API reply to return a u32 capped to 0xffffffff if
the u64 is larger than that, introduce the message with
the correct type, deprecate the message with the incorrect type.
Also, while we are updating the message definition,
add the max translations / max users per worker thread
into the new message.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I92e38a6a2bcb70fc8d1b129bbe416bf7f9e54280
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
There is a number of TERMs with big length, such as
'screen.konsole-256color' (23). These TERMs can not
be processed properly by vpp because maximum telnet
byte stream supported is 24 and we need 6 more service
bytes to send TTYPE.
So I extended maximum depth guard to 32.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I9ca506996a97e9567d06483c5f020d6cc394329c
|
|
Make it shorter and same format when converting to biggor or smaller
types.
Type: refactor
Change-Id: I443d67e18ae65d779b4d9a0dce5406f7d9f0e4ac
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Node variant names have changed to skx and icl.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I5be832aa59e4e440df53869077d801c011e3defa
|
|
Building VPP using gcc-10 fails because of the array bounds check
error for function ip4_header_checksum(), with option field in IPv4
header exceeding the ip4_header_t bound. Fix this error by turning
off the array bounds check option for function ip4_header_checksum().
Change-Id: I68cc241ae9e403d35ac2e320549506dc6565a0b6
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Type: feature
Change-Id: I85aa4ad6b68c1aa0e51938002dc691a4b11c545c
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
allocation, the remainder modulo 8 must be returned to the pool so that the number of kept buffers is a multiple of 8.
Type: fix
Change-Id: Ifd97b03ea220300e7e6fe81a8ff4a25060fea6c1
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Type: fix
Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com>
Change-Id: Ie29dec803aa4ee02755190b09573c23f9b5f0ada
|
|
This is the code refactor for vnet/flow infra and the dpdk_plugin flow
implementation. The main works of the refactor are:
1. Added two base flow type: VNET_FLOW_TYPE_IP4 and VNET_FLOW_TYPE_IP6
as the base the flow type
2. All the other flows are derived from the base flow types
3. Removed some flow types that are not currently supported by
the hardware, and VPP won't leverage them either:
IP4_GTPU_IP4, IP4_GTPU_IP6, IP6_GTPC, IP6_GTPU,
IP6_GTPU_IP4, IP6_GTPU_IP6
4. Re-implemented the vnet/flow cli as well as the dpdk_plugin
implementation
5. refine cli prompt
6. refine display info in command "show flow entry"
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ica5e61c5881adc73b28335fd83e36ec1cb420c96
|
|
Type: feature
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I64a99a4fbc674212944247793fd5c1fb701408cb
|
|
Type: fix
Change-Id: I6c6d66ad8aa158be8d2b9d111de7d46473b9dc02
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Also clib_mem_destroy() to destroy the current mspace.
Handy when an application wants to make a memory allocation arena
disappear.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I020db902fbe2473545506fecbc230c2b048992f8
|
|
Type: feature
Change-Id: Ib5d7b7e4735a5dec6c3ed74068206a86782588ca
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia67662a5b988b3b5351cea21d6d92fb3a86629b5
|
|
Type: feature
- Added multiarch support for Marvell OCTEONTX2
- Corrected Marvell THUNDERX2 spelling
Signed-off-by: Nitin Saxena <nsaxena@marvell.com>
Change-Id: I42d3654aeda89759a2db9d695592ee3227b26c2b
|
|
When we have both format blacklisted devices like:
blacklist 1234:5678
blacklist 1234:56:78.0
unformat with fmt=%x:%x matches for both strings
and the rest 78.0 substring is kept in input
and it can't be parsed for init args
This patch checks first if device format matches PCI address and
just then if it matches Vendor and Product
Type: fix
Change-Id: If111762c0e0a424b052e4f6dc0f67731bf89dc2a
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
|