Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Iecceffe06a92660976ebb58cd3cbec4be8931db0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fixed consistancy between the first classifier match and the
next_table_index classifier matches:
- CLASSIFY_ACTION_SET_METADATA was applied only for the first
classifier, but it was not applied for the other classifiers
- Actions should be performed only for input ACLs
- Payload should point at the IP header for output ACLs
Change-Id: Ifbd7791756320ae3198520c41902f5e99e3d40b4
Signed-off-by: Gregory Thiemonge <gregory.thiemonge@enea.com>
|
|
Change-Id: I010528055b9d0597b087882146496eacc13b7daa
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Adds tx pacing infrastructure for transport protocols that want to use
it. Particularly useful for connections with non-negligible rtt and
constrained network throughput as it avoids large tx bursts that lead to
local interface tx or network drops.
By default the pacer is disabled. To enabled it for tcp, add tx-pacing
to tcp's startup conf. We are still slightly inefficient in the handling
of incoming packets in established state so the pacer slightly affect
maximum throughput in low lacency scenarios.
Change-Id: Id445b2ffcd64cce015f75b773f7d722faa0f7ca9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
frame->frame_flags
Change-Id: I56b573b5da04a27766bcbcafbd5438555424f2e7
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
According to the RFC 4096 (section 3.3.1) the DATA chunk needs to be
padded to a boundary of 4 bytes with zeros. This patch addresses that
requirement.
At the same time, this patch takes care of adding some hardening for
corner-cases where the transmitted tag could be wrong.
Change-Id: I3b653926e9933d0d3d46bc5f37eaceefd932e874
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
The license issue is resolved, so we can package the .json
files. Added to the vpp-dev package in .tar.xz form, which saves a lot
of space.
Updated the perfmon error log entry: tell folks where to find the
compressed tarball, and how to extract it.
Change-Id: I3ed351fbf154cc3ba22d5f9c666acff77a2a14cf
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I88577615bfd3cddca834a7b881979ab32bfd5574
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Abstracting out the internal format function
for L4 session key type makes the other
acl plugin format/print functions more maintainable.
Change-Id: Ica1302263a42981555462b5338d18d9a9f9c8342
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ia6cadec8117d2cc35c9329910bb403bcd1b048ce
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Few devices provide PCI bar region(s) through I/O.
If any such device driver opens I/O "fd" to read and write,
needs to close it, when pci device is going to be deleted.
Change-Id: Iba104e56f76c6bf9ccd27bf2223bad39b1301763
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ib5c346641463768cf33eaf8cb5fab5b63171398d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I5ef9ecd741f1623ae1b7a23fa0a4fa6db7e243a3
Signed-off-by: Scott Keeler <skeeler@cisco.com>
|
|
multiarch support: change autotools -> cmake
getting a patch reviewed: improve patch conflict resolution section
Change-Id: I2f07e1d3f21dd8cefb4d4bb3b451965d9314211a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I5ff713ad0b254c74c5622e3b9425cca365b5ee97
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Save a few cycles on every rx and tx burst call by not compiling
in support for DPDK Rx and Tx callbacks. This feature is optional
and unused by current VPP code.
Change-Id: I1916bc8822e2bd405c1ac3909e85467a01023862
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: I09cf6ee7b4874d71f293f8f1a426d3a5e9651749
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1f58f441c65fbca101bee2e864bfa6ae2306b475
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I20f2fb14e00f3e7e96774959a4bf1a159ab9030f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ie9ff9b751190632dfc4576e5cbb1987a4142af5e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Added/tested additional cpuids from our testbed.
Change-Id: Ifd3ea9e8e8231a8901966903bf5eceb635b82482
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I8bf411adc6c5f4caa349d161174b544d2de3ad1d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Patch is too large to be ported to 18.10 just days before release.
- handle fast retransmits outside of established node and limit the
retransmit burst size to avoid tx losses and worsening congestion.
- in the absance of a tx pacer, use slow start after fast retransmit
exists
- add fast retransmit heuristic that re-retries sending the first
segment if everything else fails
- fine tuning
Change-Id: I84a2ab8fbba8b97f1d2b26584dc11a1e2c33c8d2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icb8172238f735fd0825e474e16a006f1435e175c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7030951215f0cf7d00c037892ac92d9c304cb5a1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9d96e7782a12c2e19eacbb75edb1fb450cf33bed
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: If36be24fa08e21c7718a1dced506a7f254dfb5cf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic4c46bc733afae8bf0d8146623ed15633928de30
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
if udp length is specified, then use this length to calculate udp checksum
otherwise, use length from vlib_buffer
Change-Id: I5304a60d5d429993d0524b864b65ec503775412d
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
In DPDK 18.11 the device flags for keeping/stripping CRC flags has
changed. The old strip flag is gone, and replaced by a CRC keep
flag.
Change-Id: Iaa162854862a2a0855b418ee8029383fc116d3a2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
The function dpdk_ipsec_process() attempts to initialize some
globals that store node indexes after looking up the node
dpdk-esp6-decrypt. No such node was declared, so a segv
occurs after dereferencing the result of the lookup.
Add a node function that invokes dpdk_esp_decrypt_inline()
with is_ip6 set to 1. Add a declaration of node dpdk-esp6-decrypt
that uses the node function.
Change-Id: I31ce23a458c2d4181bf40cbc2118c4ef3b9baf97
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ied34720ca5a6e6e717eea4e86003e854031b6eab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I3500113f30d6d98eae69d39b59b90569c796e011
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
(cherry picked from commit 3a9a6f72d18aa72e4038422a4c882927037441e7)
|
|
Change-Id: I5105b688ef3df2c949ba09e1e90c1b8913502388
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- logging
- pass vlib_main_t to all APIs
- open vfio container only when needed
Change-Id: I897e53e0af3f91c3a99f0c827401d1c0ec2e478a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I33567b9c5822008e6b75c7cc04f63853dee88654
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I70bc5af646894811d373456ec66aa83f2d75a477
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
add Contiv-VPP installation guidance on Aarch64
Change-Id: I323c871d346c47396916a618934c5e169ee49212
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Song Zhu <Song.Zhu@arm.com>
Reviewed-by: Trevor Tao <Trevor.Tao@arm.com>
Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
Reviewed-by: Tina Tsou <Tina.Tsou@arm.com>
|
|
Change-Id: I0b42ac6b05bc9910904a97924ea4bebc84507d4d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ibec32c6df32f4cd9889d378e244f170c93ad295b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Idcda9ae55fa2efb0b2e928bac3e8e86ff8d19eba
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ie5a00c15ee9536cc61afab57f6cadc1aa1972f3c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I7951ffd050acb618dd20b86ae5946e1228ff5d79
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
With the introduction of new types, like vl_api_address_t
it is now possible to call a message using one of those
functions with a string representation. E.g. for an IP address
ip_add_address(address="1.1.1.1/24")
The language wrapper will automatically convert the string
into the vl_api_address_t representation. Currently
the caller must do the reverse conversion from the returned
named tuple with the unformat function.
rv = get_address_on_interface(sw_if_index=1)
print(VPPFormat.unformat(rv.address))
Change-Id: Ic872b4560b2f4836255bd5260289bfa38c75bc5d
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Iffba7ebe5af8fadc0251f3a10022739d45f394ce
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
* using default socket name even when overridden in config.
Change-Id: I1849bf5269629873afd1dd48d2df785a491781c3
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
The result vector from stat_segment_ls must be freed
by the caller. Add wrapper for non-C language bindings.
Change-Id: I7eee7f80ec98b41696d354add47b26978e12ef0f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ic6b27659f1fe9e8df39e80a0441305e4e952195a
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
This is new API introduced in DPDK 18.08.
Change-Id: I66d49fe54a6abf2af621b597e8d4535e29cecec4
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7d0930a19d927bbd7ba3fc879d5a0c8064827629
Signed-off-by: Florin Coras <fcoras@cisco.com>
|