Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: feature
common funcitons across IP-in-IP and GRE tunnels for encap/decap
functions
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I325b66824878d843af167adfe5a7a96b0ab90566
|
|
Type: feature
Change-Id: I7f8e3763d7f8364563a25d0fcc782976b906b325
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
- Add newly added typedefs.
- Update string examples.
Change-Id: I1e7ee7cbf5901ba97302472521bf1f42a14765ea
Type: docs
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Prevent malicious packets with spoofed embedded IPv4 addresses
by limiting the IPv6 ingress packets to known MAP-T domains.
Drop spoofed packets.
Add several tests that ensure spoofing isn't allowed.
Type: fix
Fixes: fc7344f9be
Change-Id: I80a5dd10d5fe7492e3a1b04de389d649a78065e2
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
With this commit, ICMP Time Exceeded is sent to sender when TTL
expires at MAP BR.
Type: fix
Change-Id: I8effe163beab32596883127b819308cc355512c3
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: refactor
Change-Id: If0d9ec70f9e8c228c39505864a4a73bf94b67479
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add missing cast to time conversion function to to deal with arbitrary
clocks-per-second values.
Type: fix
Change-Id: I5075a823e7a95c972c513ac765252337d5f59fbf
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: test
Change-Id: I5522e88ee178d0563c246895393e835d125f1b81
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
When there are no dhcp client interfaces configured, it's not
useful to make periodic / timeout log entries.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I16b68fe15ad9de789e49ad1b782b3b0e536bad60
|
|
Type: fix
Change-Id: Ib823d016c64998779fb1d00b8aad3acb5e8340be
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Avoid rcv wnd probing after zero window advertisments by registering for
tx dequeue notifications and forcing acks that open the rcv wnd.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8f33e3cf917f8c83d412f370ca66013aa4cd6e67
|
|
Type: refactor
Change-Id: I9f21b3bf669ff913ff50afe5459cf52ff987e701
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
When MTU is not set, ignore_df and mtu check
always returns true and packets are dropped.
This patch puts MTU checks after it was
compared with 0 and set to maximum if not set.
Added trace node.
If MTU is less than the total length value of
the IPv4 packet plus 20, the translator MUST
send an ICMPv4 "Fragmentation Needed" error message
to the IPv4 source address
Type: fix
Fixes: 87663cdf644fb7c94c0fec9460829b7e4e7c35ca
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I35b99bc2648984cdbf5b6a57ddec91c586b15bef
|
|
Type: feature
Change-Id: Ic8aa6c48913677537301971469f9627b70c1cec8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Steps to reproduce VPP crash:
1. configure localsid End behavior
2. ping the localsid address
Type: fix
Signed-off-by: Ignas Bacius <ignas@noia.network>
Change-Id: Id780e0875ec9cdb25252217990919fb3dddbf06a
|
|
Type: fix
Change-Id: Ifb007207be97119e07c3a0eba4714eb519de043c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I9d1f9f00ac011a93709850186dcf4cf5ea3bf88a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
"classify filter trace ... " and "classify filter pcap ..." are
mutually exclusive.
vnet_pcap_dispatch_trace_configure needs to check for
set->table_indices == NULL.
Type: fix
Ticket: VPP-1827
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I43733364087ffb0a43de92e450955033431d559d
|
|
For ip4 tcp, ip6 tcp, and ip6 udp packet, we set checksum = 0 prior to
computing the checksum. We missed ip4 udp case. This oversight requires all
clients to set udp->checksum = 0 if ip4 udp checksum offload is needed.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ic608811e82099f3bec469e123671e9b281f38d76
|
|
Type: feature
plus fixes for gre
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I0eca5f94b8b8ea0fcfb058162cafea4491708db6
|
|
Type: refactor
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I18dcdb7af3e327f6cacdbcb1e52b89f13d6ba6e2
|
|
The 'tag' parameter is expected to be a NULL-terminated C-string in
callees:
- make sure it is null-terminated in both API and CLI cases
- do not allocate & copy the string into a non-NULL-terminated vector
in API case
- fix leak in CLI case
Type: fix
Change-Id: I221a489a226240548cdeb5e3663bbfb94eee4600
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
More RFC compliance.
Ticket: VPP-1816 BFD: peer discriminator not reset on timeout
Type: fix
Change-Id: I68063c18097d282b3527e3fb485c1d0d1fd1b0c8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Event polling instance is always identified by libmemif main private context.
Fixes event polling handled by libmemif.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I51dcdb279b18f8ce97bad3b2695848e0b25a232d
|
|
Type: fix
Fixes: 418b225931634f6d113d2971cb9550837d69929d
Change-Id: Ia5f4ea24188c4f3de87e06a7fd07b40bcb47cfc1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Regardless of whether the virtio_net_hdr is sent as a separate
descriptors or in the same descriptor as the data, we always want to
skip the header length - maybe moving to the next descriptor along the
way.
Type: fix
Change-Id: Iaa70aeb310e589639b20f8c7029aaa8d3ce5d307
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
See: https://docs.fd.io/vpp/19.08/nat_ha_doc.html
Type: docs
Change-Id: I43ecf1dfb6976ebafee04d820f0e1b07393a0b93
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Call session queue node with the right node runtime instead of the
pre-input node runtime.
Type: fix
Change-Id: I43d20bed4930fc877b187ce7ecdce62034b393c5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I30e37f7e549083337b11ace95b4ff4f427d9fc8c
|
|
Type: feature
The current feature ordering of NAT44 nodes with respect to the
ACL plugin's IPv4 input/output features is:
ip4-output: acl-plugin-out-ip4-fa runs before any NAT44 nodes
ip4-unicast: acl-plugin-in-ip4-fa runs before any NAT44 nodes
ACL rules with action permit+reflect can keep track of outbound
flows and allow the replies inbound without an explicit inbound rule.
If ACL permit+reflect rules are configured on an interface that also
has NAT44 configured with output-feature/postrouting translation of
outbound packets, the ACL rules cannot allow inbound packets. The
ACL state that was stored on the outbound flow contains the IP
addresses of the original packet, prior to translation. The inbound
packets are being evaluated by the ACL node using the translated
addresses.
The order of processing inbound needs to be the opposite of what it
was outbound for this to work. Change the NAT44 features on
ip4-output so that they run before outbound ACL nodes. This matches
the existing behavior of the NAT44 nodes which rewrite
source addresses as an input feature instead of an output feature.
This was only done for endpoint dependent mode because the regular
endpoint independent in2out-output node currently selects an
explicit next node rather than using the next node on the feature
arc.
Unit test added to configure both NAT and an ACL and ensure that
out2in packets matching an in2out flow are permitted by the ACL
and translated by NAT.
Change-Id: Ibd679c28b64c3fc3cc8c0606ea93123e384e839f
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: fix
Change-Id: I3d24a7973c7113ffeb9109e89cda7fa960e73a5b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: I402549818ba6e078802e914293304174dc6625c2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: docs
Change-Id: I3bb589d04f15a03166a6d457552ffc316fb02f94
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Tetsuya Murakami <tetsuya.mrk@gmail.com>
Change-Id: I358a290f4ac121f075f7ee52941beabe478bfba0
|
|
Binary API trace replay with multiple worker threads depends in many
cases on worker thread graph replica maintenance. If we (implicitly)
assert a worker thread barrier at the debug CLI level, all graph
replica changes are deferred until the replay operation completes. If
an interface is deleted, the wheels may fall off.
Type: fix
Ticket: VPP-1824
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I9b07d43f8501caa5519e5ff9ae4c19dc2661cc84
|
|
Type: fix
Change-Id: Iff9b1960b122f7d326efc37770b4ae3e81eb3122
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: I0e826284c50713d322ee7943d87fd3363cfbdfbc
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Change-Id: Icb4b331c9346d3781f4ddd6f62891c78d4059c1f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
The crash occured trying to retreive a NULL path list to walk the path
extensions. A walk shoul not be required, because there should be no
extensins, since all paths are removed. The problem is that when the
paths were added, they were not sorted, hence neither were the
extensions and when they were updated, duplicate extensions were added,
and hence a path removal did not remove them all.
Fix is to make sure paths are sorted.
Change-Id: I069d937de8e7bc8aae3d92f588db4daff727d863
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 257749c40946a9269140d322e374d74c3b6eefb8)
|
|
Type: fix
Change-Id: I5d47cb9bc7eb7f3c8485e3b42f0701e81d87ba2a
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
There was an attempt to fix this problem in the commit:
d3b8c861a44e70c197ab721fa3ce7f38bbeab7fd
But checking the LOCALLY_ORIGINATED flag didn't work because this flag
gets reset before it can reach the NAT nodes.
With this commit, replace the check for the LOCALLY_ORIGINATED flag
with a check to see if the packet is a DHCP broadcast.
Type: fix
Change-Id: I069c08a785b5988b10192f528e4f9c4c7cc2f8a3
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: fix
Ticket: VPP-1817
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: Id4d694ce636b0a213e65ce27c32a8150df9af0f8
|
|
Type: fix
Change-Id: I6a48a6c14bfb84b3460e8211021bc9df6e915dba
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Currently if user want to set ip4 address to the api, it must convert to ip6
format, e.g. user want to ip4 "90.1.2.1" but must convert to "::5A01:0201",
it is not acceptable, this fix solved the issue.
Ticket: FDIO-753
Type: fix
Change-Id: I2ffa5a3d38400ee176cf601421074f71fc395f03
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Change-Id: Ie2a3c0f44322dd8415603b7ce51bb72d72769c95
Ticket: VPP-1815
Type: refactor
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Return FIB table_id instead of vrf_index to clients
Type: fix
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: I76a97bad3ecd3ac8eb045efb1657eaa90c2a57b6
|
|
Recent modificaton to vhost_user APIs for typing which added a sw_if_index
filter to the API sw_interface_vhost_user_dump with the default value -1 to
mean all interfaces. But the default is not set from api_format.c, causing the
binary-api command for sw_interface_vhost_user_dump to display nothing.
Also missing is the proper display on custom dump for the aformentioned API.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I05546e2318165af7531977fbed66ea7224c4a7ce
|
|
Fix minor typo in the quad-loop for swif which may actually causes problem
if swif0 != swif1 or swif2 or swif3.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ib81f323479c7ecbd28d84956cffbc20b1072d2c2
|
|
Type: test
Change-Id: I97e02ebc5989eee794511c1ed6049e300be7d64e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Traceback (most recent call last):
File "run_tests.py", line 886, in <module>
exit_code, suites = parse_results(results)
File "run_tests.py", line 732, in parse_results
results_per_suite.print_results()
File "run_tests.py", line 683, in print_results
result.get_testcase_names(failed_test_id)
TypeError: 'NoneType' object is not iterable
Type: test
Change-Id: I2c5ae0b9e11be6bfb4490d9ce057db0b0a84c9bf
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|