Age | Commit message (Collapse) | Author | Files | Lines |
|
Supported only when eventfd option is enabled.
Type: feature
Change-Id: Ic9d6e38604e978f7bc8e54d74fe9b8f3fc53622d
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: refactor
To be consistent with the location of the IPv4 responder
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ie3a5c3ecc10755317591d7ff57b74770c2798e77
|
|
Type: improvement
Ethernet frames on the wire are a minimum of 64 bytes, so use the length in the UDP header to determine if the ESP payload is one bytes of the special SPI, rather than the buffer's size (which will include the ethernet header's padding).
In the case of drop advance the packet back to the IP header so the ipx-drop node sees a sane packet.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ic3b75487919f0c77507d6f725bd11202bc5afee8
|
|
Type: fix
Signed-off-by: Vyshakh Krishnan <vyshakh@rtbrick.com>
Change-Id: I0b085fd2d3d9b8e08a16585c4964101b6461bf06
|
|
Type: fix
Since commit https://github.com/DPDK/dpdk/commit/e2a6d08bef489215ebb77b1d3033875ada757cfa
DPDK started advertising scattered Rx feature for elastic network adapters. Thus, dpdk
plugin doesn't have to disable it for ENA by default anymore
Signed-off-by: akolechk <akolechk@cisco.com>
Change-Id: I2d4f429be992e3c4edcc0c3adf8c55f3d5381631
|
|
Originally XDP_FLAGS_REPLACE was passed to the function.
For kernels not defining this macro (for example 5.4) in if_link.h vpp
sets it to 0.
If kernel has this macro problem appears, replace flag requires
specifying the program to be replaced. bpf_set_link_xdp_fd wraps
around __bpf_set_link_xdp_fd_replace and passes 0 as old_fd, it leads to
an error while assessing for replacement (if 0 is passed
there is no assessing for replacement).
To address this issue no flag is passed to the function, only 0.
Type: improvement
Signed-off-by: Dastin Wilski <dastin.wilski@gmail.com>
Change-Id: I3689ce7eb8c71c699f0e589111929979c2bbe213
|
|
Type: improvement
When the adj subsystem is notified of a BFD session, it attempts to find the appropriate adjacency from the session's key.
This could lead to a mismatch between the adj used by BFD and that of FIB. The BFD session stores the adj it is using, so FIB uses that instead.
Since adj is now using the same adj as BFD, it does not need to maintain its own locks.
In BFD it is necessary to initialise the adj index used in INVALID and ensure it is not unlock before listeners are notified of the session delete.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I9630867b10bb18969475299a0c754942a8df0f44
|
|
Type: fix
The adjacency used is then the same one as that used by routes in the FIB and so the BFD protection/fast-failover works for thise route, since they are children of the BFD protected adjacency.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I72e10b3074697cba8a002a4c1acf690983985157
|
|
When the ipfix address was changed to be an ip_address instead of
an ip4_address the output when creating an exporter via the cli
should have been modified to take the address of the v4 part of
the addr.
Type: fix
Signed-off-by: Paul Atkins <patkins@graphiant.com>
Change-Id: I141456cd9092c861a4c4aefba4035dbde23efcd6
|
|
Fix for the crash when both crypto_native_plugin and DPDK QAT
are enabled in startup conf.
Type: fix
Signed-off-by: mgovind <govindarajan.mohandoss@arm.com>
Change-Id: Ib020ed7130a99080a093c70c06d47bcacd6d23b1
|
|
Type:fix
Signed-off-by: fanxb <fxb_mail@163.com>
Change-Id: I244f6ddd0a34e82ababd375646d3bb194602b5d5
|
|
Type: refactor
IP4 does not depend on TCP (it's the other way around).
This upside down dependency leads to some nasty circular includes when trying to use ip46_address.h in interface.h
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I4a1bd21543b08b9c1cf1e5563da738414734a878
|
|
Add udp total session counts - as stat segment entries:
/bfd/udp4/sessions
/bfd/udp6/sessions
and per session packet/byte counters:
/bfd/rx-session-counters
/bfd/rx-session-echo-counters
/bfd/tx-session-counters
/bfd/tx-session-echo-counters
These counters are per-thread and per-session id.
Adjust tests to verify proper function.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ie597928022b6ac74c2220019b9e8e1714295f170
|
|
This change fixes multiple unused parameter warnings, narrowing
conversion warnings and identical switch statement warnings.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I4140e939c409ce06cc5aaaf5e1b042681f7ca448
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id78cdf742689a5cff356ac0aa3167af1c886b531
|
|
Type: fix
Signed-off-by: Rajith P R <rajith@rtbrick.com>
Change-Id: I8c9c85081c27bfe7ee71b5b620a2a761e027789c
|
|
Can be used for throughput testing over http. For instance, start
server:
http tps #implicitly listens on port 80
Then, to test throughput with curl:
curl <server_ip>/test_file_10g
curl <server_ip>/test_file_123m
Similarly, for https:
http tps uri tls://<server_ip>/443
curl -k <server_ip>/test_file_1g
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I30ab7f0d94a7357b3f04546e4a3d3c410a733908
|
|
Type: fix
Change-Id: Id183c47328510b5db7ffcc7a4dfb41f5a3151399
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iad7304c3a8fef14ec85c4240714feb86637411ca
|
|
Support segment and fifo sizes for now.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie7242936de7a87df8a703eb371f665be5be4390d
|
|
Makes it similar to connects.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I38c328670054e1a9ba4dc4ea8fe7519a5a09e8be
|
|
Special bitmaps with VLIB_FRAME_SIZE bits.
Type: improvement
Change-Id: I48747e422e519e7b5e930fa720397459d3adbb8e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: test
The FIB UT fails in debug mode because there is no string associated woth its fib_node_type_t.
Change the tests to register their own type, which will give it a name.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I36e546718faa7241c088494cbae10939aca51d5a
|
|
It is annoying to see unsolicited message like this spew out to the
console which an end-user cares less about.
vlib_stats_rename_symlink:301: RENAME new name: /nodes/unix-cli-local:52/clocks
Type: fix
Fixes: I92a62bb1cb799e8fdc3ec4110ae3428825254f8a
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I071f3d3736c06cd95a38ec46c7e2222caad01283
|
|
Type: improvement
Change-Id: I4b89c32c224caf8a3a4ac94b26ecefffd26c7038
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Faster memcpy variant when overrun of up to SIMD register size - 1 is
accepable.
Type: improvement
Change-Id: I1fb22e2989f2156caa9f34fa096e6ff9ea9ec7b6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
not needed, '>' works...
Type: improvement
Change-Id: I9bfbac787e8dca24e9b1bceda0922740eed26346
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Half-opens are only allocated from main with worker barrier but can be
cleaned up, i.e., session_half_open_free, from main without a barrier.
In debug images, the free_bitmap can grow while workers peek the
sessions pool, e.g., session_half_open_migrate_notify, and as a result
crash while validating the session. To avoid, proactively grow bitmap in
debug images.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2410793f933fb638651fe8dc08ba78e9bee0bd77
|
|
Type: feature
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Id25e2188c9167b2e187923ebe10660e0bc9c3c0a
|
|
ip6 and mpls fib_table->ft_locks memory leaked when the table is
deleted.
name tag is leaked for mpls table parsing.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ife68c0ddc3a6f9437a149b308310f042799c2116
|
|
Type: improvement
helps keep the agents stateless
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I3588f13c081e24f5a8083b490eb02856361e4ccb
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7aff3a02315f9f92039dd2e3af1cbd8312aec662
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I3b6e56b319aab3ffd2cc82d31e646bd42901275b
|
|
When deleting a memif interface, there is a memory leak in
mif->local_disc_string. The code that leads to memory leak is
memif_delete_if -> memif_disconect -> vec_dup
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I579c743c3d47770131153e083e65f6cd899067b3
|
|
Debian 11 has some packages that have changed, and need adjustment.
Also - its default compiler is gcc 10, which, contrary to either gcc 8
or gcc 11 prints a bunch of warnings, which fails compilation.
And there is no gcc 11 package.
Therefore, use clang for this build.
Additionally, python 3.9 has exposed this issue:
https://bugs.python.org/issue42580
Therefore, make a local patch to scapy to tackle it.
Type: feature
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Change-Id: I7b9c0f852ab97fe3c1feca3f22020ac0970ba3e2
|
|
IGMP packets with Router Alert option are delivered to ip4-local
without going through ip4-lookup. Make sure fib_index is initialized
properly.
Type: fix
Change-Id: Iab090a33c4c759b6d7f68c28a0b3f4da7a9de864
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
- pip == 22.0.3
- pip-tools == 6.5.0
- setuptools == 60.7.1 (now pinned in test/Makefile)
- upgrade packages in requirements-3.txt
- install iperf3 for 'make test TEST=vcl'
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I1bd85f10fb4f6ba87b9bc1267905e5f1b8eb16de
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6d5527c49e9085f35be988549c2f1460be7fd4f0
|
|
rte_eth_tx_burst() returns the number of packets actually stored in
transmit descriptors and the return type is uint16. n_sent cannot be
negative and the if branch is dead code.
Type: improvement
Change-Id: Idc2980d342756c1093ddf74ea6207d072e819331
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Fixes: 72e31bc2d9
Fixes: db02380
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I92a62bb1cb799e8fdc3ec4110ae3428825254f8a
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Signed-off-by: Jon Loeliger <jdl@netgate.com>
Type: style
Change-Id: I955c19ddbe06ef3651c03820fcc14054c63258b9
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic002444c51b1ecbbf18a49863cf01888d28c4632
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibca4bf59e6319ffdc1beaa084ca80f216e062af0
|
|
Also reset send params flags before calling transports to avoid explicit
resets in all transports.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I1da7b3fab009728e7fee4199425ced933fa8a122
|
|
Mark broken test suites using @tag_fixme_asan.The main issue
is that some tests do not pass with ASan. These will need to
be fixed, but it takes time and in the meantime, new issues are
introduced that trip up ASan. When this tag is set and Asan
is enabled, failing ASan tests are skipped, so incremental
fixes can pass the CI
Type: improvement
Change-Id: I02602eb74234c25a4c701279e14704b81d4c5b71
Signed-off-by: Naveen Joy <najoy@cisco.com>
|
|
Reduce number of arguments by removing an argument which is only ever
used with same constant value.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I061635b28031d75eb1f853b570e85f6e5a9094df
|
|
Type: fix
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I6d23ff14380b0154f617b3ab7cd1acd5aa45106a
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8b40d4e935c9280ff89a3d0f8b30bd7beac1e08a
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I58ecd933f36c6622f4c6b373d2d94a48f9fc9eae
|
|
This also changes the behavior of the nat44-ei hairpinning feature.
Rather then enabling the feature on every nat interface, it is enabled
only on local0.
Type: improvement
Signed-off-by: Filip Varga <fivarga@cisco.com>
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4e16a83c9e328aa75fc61df508b620ef743ca775
|