aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-01-30Update to doxygen documentation for release 19.01Andrew Yourtchenko1-0/+1
Change-Id: Id19cefc24d391f0437a0355f5328505ec21aa58a Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-28avf: fix queue enable issueDamjan Marion1-8/+11
It is actually a bitmap.... Change-Id: Ie359e085df3f371512f773600f8d7460b2232b3e Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
2019-01-25IP6 FIB: walk table for dump (VPP-1553)Neale Ranns1-12/+7
Change-Id: Iaa57ace6df96bfacd1235c80ec7bb08e5f335530 Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit 5c1f559b1bf32acd528664e7674a2d46f2aed947)
2019-01-23bond: packet drops on VPP bond interface [VPP-1544]Steven2-20/+21
We register callback for VNET_HW_INTERFACE_LINK_UP_DOWN_FUNCTION and VNET_SW_INTERFACE_ADMIN_UP_DOWN_FUNCTION to add and remove the slave interface from the bond interface accordingly. For static bonding without lacp, one would think that it is good enough to put the slave interface into the ective slave set as soon as it is configured. Wrong, sometimes the slave interface is configured to be part of the bonding without ever bringing up the hardware carrier or setting the admin state to up. In that case, we send traffic to the "dead" slave interface. The fix is to make sure both the carrier and admin state are up before we put the slave into the active set for forwarding traffic. Change-Id: I93b1c36d5481ca76cc8b87e8ca1b375ca3bd453b Signed-off-by: Steven <sluong@cisco.com> (cherry picked from commit e43278f75fe3188551580c7d7991958805756e2f)
2019-01-21ldp: add support for TCP_CONGESTION sockopts (VPP-1550)v19.01-rc2Florin Coras1-0/+9
Change-Id: I0fcf3385cc4fb96f000b84d5f880f74131c0d60f Signed-off-by: Florin Coras <fcoras@cisco.com> (cherry picked from commit 0ed24e93b207850078ca7f58cd4106cc4a906952)
2019-01-21doxygen formatting fix: prevent stray examples appearing in the docsAndrew Yourtchenko1-2/+2
The 'example' keyword triggers the creation of very out-of-context example in the "Examples" top level of documentation. Rename the keyword in the comment so the comment is still readable, but does not trigger the doxygen. Change-Id: Iecbdc236918f9178a034817aa6cea7ab6b2c1654 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-20session: add support for vrf in session unformat (VPP-1546)Florin Coras1-7/+22
Change-Id: Ic5ba751c2bd2db9af4a21d3db40cc305d1208c30 Signed-off-by: Florin Coras <fcoras@cisco.com> (cherry picked from commit baee8d498830bbbf54ec76e7c0c887c6373fe985)
2019-01-20tcp: fix debugging without cc stats (VPP-1547)Florin Coras1-0/+1
Change-Id: I376856fcadce570bb555064435f5876eefb2befa Signed-off-by: Florin Coras <fcoras@cisco.com> (cherry picked from commit 0702554639e5149d9012cc196aa43c3c8d0d7f9b)
2019-01-20fix data_length in IpSec API call (VPP-1548)Michal Cmarada1-4/+6
Change-Id: Idb2839f6082bd2e052be2bc5417f0ebb43d1c0a6 Signed-off-by: Michal Cmarada <mcmarada@cisco.com>
2019-01-20VOM: ip-mroute inspect register handler fixNeale Ranns1-1/+2
Change-Id: I57689446005da00fa064e2938cfe55a9e1cef9fc Signed-off-by: Neale Ranns <nranns@cisco.com> (cherry picked from commit d870ce441272d7057c8cb2b8f9731ebe41a17f0a)
2019-01-18tcp: allow data in passive open ack (VPP-1545)Florin Coras1-2/+3
Change-Id: Iceb99d3f8b7029bd1b1e9ebafb1e0b3790c573e4 Signed-off-by: Florin Coras <fcoras@cisco.com> (cherry picked from commit 865872ebdb2bbaf3f157e2a9889405b84114d2eb)
2019-01-18VTL: Use latest version of syslog_rfc5424_parser (0.2.0) released: 190117Paul Vinciguerra1-3/+1
Upstream changes not compatable with: https://gerrit.fd.io/r/#/c/16797/ Running tests using custom test runner Active filters: file=test_syslog.py, class=None, function=None Adding tests from directory tree /vpp/test 1 out of 914 tests match specified filters Not running extended tests (some tests will be skipped) ============================================================================== Syslog Protocol Test Cases ============================================================================== Syslog Protocol test OK ============================================================================== TEST RESULTS: Scheduled tests: 1 Executed tests: 1 Passed tests: 1 ============================================================================== Test run was successful Change-Id: I42f86ae3e7f062c0343025ba16bc6e8d2c34ed50 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com> (cherry picked from commit 5011c67058c3c37d344c5d83ab6046700327b7b4)
2019-01-16Initial changes for stable/1901 branchv19.01-rc1Andrew Yourtchenko1-0/+1
This patch adds an entry for the defaultbranch in .gitreview Change-Id: I3dc45492ec51b10524b0a6d894c7e42c352f0daa Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-16make test: raise packet tracing limit to 1000Klement Sekera1-2/+2
Change-Id: I4309cefe13ee861342e7962c7652919a47748656 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2019-01-16DOC ONLY: update readme.mdDave Barach3-469/+28
Remove the source code, replace with reference to the upstreamed patch. Change-Id: I6f5430b1e9804530afbec1805353852e1da745d6 Signed-off-by: Dave Barach <dave@barachs.net>
2019-01-15vmxnet3: add numa support and link speedSteven4-13/+23
Allocate physmem on the same numa set link speed cap vmxnet3 support version to 3 if the device supports higher version Change-Id: Id47dd83b0da53e623fd6cf3ad010e58158b1ab15 Signed-off-by: Steven <sluong@cisco.com>
2019-01-14api_helper_macro mp->pid is network endianOle Troan1-1/+1
Change-Id: I7d2385b9e9bf5a62f3e9382ca2627a74a4e30785 Signed-off-by: Ole Troan <ot@cisco.com>
2019-01-14VTL: vpp_papi_provider: Don't shortcircuit vpp_papi jasonfile detection.Paul Vinciguerra1-5/+5
The detection login in vpp_papi is significantly more advanced than the implementation in vpp_papi_provider. Let's take full advantage of it and ensure consistent behavior. Change-Id: I786e6d5f4588a0d74e863cce1b0bc1a93fa0e614 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-01-14VTL: Allow running simple unittest.TestCases.Paul Vinciguerra3-14/+18
It came to my attention that Ole added a simple test in: https://gerrit.fd.io/r/#/c/16381/ and the framework forced him to launch an instance of VPP to test the formatting of a mac address. This change allows the test framework to run standard unittest.TestCases without the need to spawn a VPP instance. Change-Id: I56651ab27c4c6bf920081a526f168a743d643201 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-01-14VTL: New version of pyparsing breaks tests.Paul Vinciguerra1-0/+2
Specify use of version <2.3.1 released Jan 13, 2019 Change-Id: I23cfb802a677956b77897e0c2b690fac50e18541 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-01-13remove useless line in dpdk cryptodevSimon Zhang1-2/+0
Change-Id: I2ef33c7c15b3eb1f55bbfd5cbdd230d6a4d58936 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2019-01-13bonding: support custom interface IDsAlexander Chernavin8-8/+55
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91 Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
2019-01-13dpdk: show hardware may display the wrong information for rss activeSteven1-0/+1
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that happens, we display whatever that was in the stack variable for rss_hf which is confusing. The fix is to clear rss_hf prior to the call. Before the fix -------------- DBGvpp# sh hard Name Idx Link Hardware format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95 GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0 Link speed: 10 Gbps Ethernet address 00:0c:29:c4:8c:eb VMware VMXNET3 ... rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other After the fix ------------- DBGvpp# sh hard Name Idx Link Hardware format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95 GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0 Link speed: 10 Gbps Ethernet address 00:0c:29:c4:8c:eb VMware VMXNET3 .. rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp rss active: none Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654 Signed-off-by: Steven <sluong@cisco.com>
2019-01-12session: generate wrong thread errors instead of crashingFlorin Coras7-23/+47
Change-Id: I7e59ae718d2722c49d42b22a0874e1645a191e89 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-01-11Fix custom-dump for gre_add_del_tunnel: src and dst IPsIgor Mikhailov (imichail)1-7/+4
Change-Id: I747ca01dc8df9fb5e11168ec46979c4a1f1baa7c Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2019-01-11Fix 'show interface span' field lengthIgor Mikhailov (imichail)1-2/+2
Allow to display longer interface names, e.g. VirtualEthernet0/0/0.102 The field length (32) is now the same as for 'show interface'. Change-Id: I1cb1efd459acb800bfaeeec40b672c8b17cd8c3d Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
2019-01-11Fix interactive testsjuraj.linkes1-2/+4
When running tests interactively (i.e. not using child process) the tests are split into small suites each containing tests from a VPPTestCase, but only the first suite is run. Fix this by creatin a new suite with all of these small suites in it and running that suite. Change-Id: I0236f4a980d01765eb993f41d54d98640bb2cd39 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2019-01-11gbp2: Fix typo in conditionMohsin Kazmi1-1/+3
Change-Id: I1b327309586c9234a22cda011953a1940d31e1ba Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-10strncpy_s_inline copies more bytes than necessarySteven2-3/+13
Given n equals to the maximum number of bytes to copy from src in the API, or the rough estimate strlen of src, strncpy_s_inline should not copy more than the number of bytes, computed by strlen(src), to dst if n is greater than strlen(src). The number of bytes to copy is computed by strnlen(src,n), not n. Change-Id: I088b46125d9776962750e121f1fbf441952efc2b Signed-off-by: Steven <sluong@cisco.com>
2019-01-10vpp_config: Rework for Python2/3 compatibility.Paul Vinciguerra12-406/+554
On ubuntu: $cd <basedir>/extras/vpp_config $./scripts/clean.sh $./scripts/cp-data.sh $sudo apt-get install python3-pip python3-setuptools $python3 -m pip install . $vpp-config Changes: * Convert to print() function. * raw_input changes. * floor division changes. * replace vpp-config.py with a setuptools 'vpp-config' entry_point. * replace netaddr with ipaddress from the standard library and backport. * .decode() subprocess.Popen's stdout because in python3 they are bytes. Change-Id: Id98894ee54e0c31a0ba0304134b159caef415705 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-01-10VOM: IP route ECMP supportNeale Ranns4-33/+85
Change-Id: Iede0c30aacfe7289f428062bb9540410097c40e2 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-10session/vcl: improve fifo tx notificationsFlorin Coras5-83/+144
Change-Id: Ied476c417c8ba5b4d7c615125c36eecd9ca64fbc Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-01-10ARP/ND: copy opaque2 persistent fields to new packetNeale Ranns4-6/+19
Change-Id: Ic65f686aaccaf8450732d88d7471b587faccaa9d Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-10Enable random reassembly test for ARMjuraj.linkes1-4/+1
The underlying failure has been fixed and now the test can be re-enabled. Change-Id: I75251f6150ef1771dc23ea079799229690cf87d9 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2019-01-10Enable GBP tests for ARMjuraj.linkes1-6/+1
The underlying failure has been fixed. Change-Id: If2ca92a17cfed1c2d7253e46ab161f301f847f29 Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
2019-01-09Use the official libpcap file typeDave Barach3-15/+10
Change-Id: Ia34a4278eedc8cf450688b1fa0291e1f976868d3 Signed-off-by: Dave Barach <dave@barachs.net>
2019-01-09test/vpp_papi_provider.py: Fix simple copy/paste error.Paul Vinciguerra1-1/+0
Change-Id: I8993132bdd0931c96ba8bc879ec3b4ae938a46c5 Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-01-09test framework. Remove unused code.Paul Vinciguerra1-14/+3
Change-Id: I1bd14d5aff4918b58aef18fa0a9264e033989f6e Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
2019-01-09gbp: Fix coverity warningsMohsin Kazmi4-9/+19
Change-Id: Iea64d246008b298edeeae338d781b79362f42046 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2019-01-09VXLAN: Prevent duplicate bypass graph nodes.Jon Loeliger2-4/+37
Change-Id: I68cc509b594b09751ff5e0e09bbca187a4a88edd Signed-off-by: Jon Loeliger <jdl@netgate.com>
2019-01-08Fix name of ipv6-n-tupleHongjun Ni1-1/+1
Change-Id: Ia95a75295e4865b4720573f164ccba8bcc7679ae Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2019-01-08virtio: fix kick race issueDamjan Marion3-10/+29
Change-Id: I25b2a28513821bc5eab9ac6890a3964d412b0399 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-08vcl/ldp: select cleanup/improvementsFlorin Coras4-254/+223
Change-Id: I640e69388f2ab0f66ad60c5165c749f5a5a9f525 Signed-off-by: Florin Coras <fcoras@cisco.com>
2019-01-07string_test: coverity woeSteven1-6/+0
Remove the needless tests and checks which coverity complains about in string_test.c Change-Id: I971650cada77136f06528a65625ef99bd3d7e915 Signed-off-by: Steven <sluong@cisco.com>
2019-01-07tapv2: add "tap_flags" field to the TAPv2 interface APIAndrew Yourtchenko4-2/+11
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2019-01-07avf: allocate descriptor memory from local numaDamjan Marion7-14/+52
Change-Id: Ic56ee4ce83b282a5f0f5aed500721fe639b941b3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2019-01-07VOM: mroutesNeale Ranns17-123/+1378
- fixes in ip.api for dumping mroute path flags Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204 Signed-off-by: Neale Ranns <nranns@cisco.com>
2019-01-07L2 BD API to flush all IP-MAC entries in the specified BDJohn Lo6-13/+133
Implement API/CLI to clear IP-MAC tables used for ARP-termination in the specified bridge domain. The CLI to flush MAC IP tables for a BD is: set bridge-domain arp entry <bd-id> del-all The API added is bd_ip_mac_flush. Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8 Signed-off-by: John Lo <loj@cisco.com>
2019-01-07MAP: Prevent duplicate MAP-E/T graph nodes.Jon Loeliger3-0/+35
Change-Id: I6031f3f9cfa048a901a8424d33d47679115c2eb3 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2019-01-07Change vpp code to align with openssl interface changePing Yu3-36/+27
PR in openssl community is almost done, and need to change some code in VPP to align with the openssl interface. Change-Id: Ic7da53e507b67b53958760d07738dd774b1c526d Signed-off-by: Ping Yu <ping.yu@intel.com>