Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix VPP startup problem where it cannot attach to a combination
of 3 Intel igb 1GE ports and 2 Intel ixgbe 10GE ports whose PCI
addresses are specified in the DPDK section of VPP startup
config file as follows:
dpdk { dev 0000:02:00.1 dev 0000:02:00.2 dev 0000:02:00.3
dev 0000:05:00.0 dev 0000:05:00.1 }
Change-Id: Ibb12f9e9a9184d00da51a49961772ac3a42a2d1d
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I7a028ce9ddf21bd3a7d4991ba1be05e5e74202d6
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
New debian package "vpp-plugins" is created with enabled plugins.
Change-Id: I8920178e8874f12e075858001ec44257dfaf497d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8f1be9a501574ff4d5024ed0d632392708716e77
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If6ab5f08bcdcf5e24bb8b31926894d2a56cb6c14
Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
|
|
JIRA: VPP-90
Policer allows you to specify the action to be taken on a packet:
conform-action (green color)
exceed-action (yellow color)
violate-action (red color)
Action to take on packets:
drop - drops the packet
transmit - transmits the packet, the packet is not altered
mark-and-transmit <DSCP> - sets the DSCP value and transmits the packet
Change-Id: I59c037e55e7e2a9fc9b9752e92426f3977f5587b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I1df1cd3d2630baab979e840153f1f109d3ead0c2
Signed-off-by: Dave Barach <openvpp@barachs.net>
|
|
When ENIC ports are used as slaves to a bonded interface, these patches
enable traffic on bonded interface to resume properly on admin down and
then up of the bonded interface.
Change-Id: I339926010da614068417c72009b7af2f892890ce
Signed-off-by: John Lo <loj@cisco.com>
|
|
The information is aleardy stored in array.length field, but
vpe.api syntax should be uniform.
Change-Id: Id84cd95c088281609c70548346cf0e408a6f49ff
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
The API to add an adjacency requires that two things be provided 1) a
local and a remote eid 2) the whole remote mapping for the remote eid.
Since the API to add remote mappings can be used for 2), 1) in
combination with this API are enough to add an adjacency.
Change-Id: Ibe7474924bc3f28b6aed19cefa78fdb812de5eac
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I22399aa9d55db0d91da7ba6acbbf552c0d201458
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I7006a3068c22e18e62c84abb8cc6124695b9ca44
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I494280964deda1d9448540cb5c6e7a8b750fff93
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I816de8b1f255dc3bc6d2904566ea0b0f68fac5d8
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Adds missing items to ip_neighbor_add_del help text
Change-Id: I1d74c7d31ec6d96f8de9bfb5bfc7872b9cbef682
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I72d0dff064162d11321257c858f68da1ba79ea48
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: If2d57a213fc2fec996db26df332910c3d2105f97
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
A malicious packet could advertise an extension header length bigger than
the actual packet length, which would cause an overflow.
Change-Id: I277123e6fde6937b0170f2b2e33846bd22848ac4
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
Change-Id: Ifa9bcd9a9c5dbda00ff8096909ccbc822445b8cb
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Also enable silent rules where missing
Change-Id: Ia521886815c862b013f01df4cc18fd8a298aaaa1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I52b370abd8b6fec34b8219a274f2de404e072a97
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I32dcfb1c33f0b2324de1ebf08851e8b65793e4ea
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I3346b18126d65b72726e977dfb11ba4c380056c0
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Make src port configurable in flow report sample code
Change-Id: Ic7d3c3de17b83821106a827fb65e79381044da7e
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
- configure.ac - some plugins are enabled by default
- Plugin .so files are placed into corresponding subdirs
- WITH_PLUGIN_TOOLKIT macro is retired - not needed anymore
- plugins/build-data is removed
- plugin makefiles are not building static libs anymore
- plugin makefiles are not installing header files to /usr/include
anymore
Change-Id: I55681bd9ce34811f7eb1b2b24d9f0ca42df1cf04
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
CID 130914 Buffer not null terminated
CID 130916 Unchecked return value
CID 130938 Unchecked return value from library
CID 130939 Unchecked return value from library
CID 130940 Unchecked return value from library
CID 131042 Argument cannot be negative
CID 131222 Resource leak
CID 131223 Resource leak
CID 131334 Double close
CID 131335 Read from pointer after free
CID 131211 Resource leak
CID 131212 Resource leak
Change-Id: Idd80b91f621278e0be15911f2ed4354dbe4fc7f2
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
The init of VIC/ENIC ports enable VLAN stripping of received packets by
default, which is different to all other devices. The VLAN stripping of
ENIC ports can be disabled by adding the per device DPDK config as
"vlan-strip-offload off" such as:
dpdk {... dev 0000:0c:00.0 {vlan-strip-offload off} ...}
The per device config "vlan-strip-offload on" can be used for enabling VLAN
stripping for other devices which support this function but is disabled
by default.
Change-Id: I9c81904a87c26868a07900b03677aeeb57f72372
Signed-off-by: John Lo <loj@cisco.com>
|
|
Reset IPFIX streams if reconfiguring IP addresses or collector port
Change-Id: Idc914f90462572342d4ed02b538bb2d30b317931
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ib6f7dd9d7e1d9f2f2108a8b89421149e4435d5ec
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Make Path MTU configurable
Make template resend interval configurable
Make collector port configurable
Change-Id: Ia557916137995ea565f0ede12e169efe81eb0a5d
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I85b3543a3f72a10e15c252e04ce2e4a390513ca9
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Indirect routes should always result in an indriect adjacency even when the route's next-hop is covered by a connceted, since the covering route may change and no tracking is in place.
Some de-duplication of code for installing indirect routes via the CLI and API.
Change-Id: I7a440ffba43ae3990b68cb407244c06bd0827534
Signed-off-by: Neale <nranns@cisco.com>
|
|
Change-Id: I3b65e85d24ed37b6889af7e194fee45ec61b15a8
Signed-off-by: marek zavodsky <mazavods@gmail.com>
|
|
Change-Id: Iba8627062874eac63c584ec05343f4591f48c286
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ib8ef0559aa0573bf1229e9c794d48520197f9c8a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Otherwise, e.g. the ip4/6_main_t's change size between PLATFORM=vpp
and PLATFORM=vpp_lite. That, in turn, makes it far easier to build
broken plugins.
Change-Id: Ic962d75b170eee698de29c4e29849ce73d27caad
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I57e442b1f3486c5e8caac9d2e288869ee10f37b8
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I11207a0452cbccfb959ff426faefda4820463007
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I3c3427c61e32d4727360aa802950bb9ab44afd84
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also add an index of node names
Change-Id: Id65c2e607976d8bad73deb738035a471be077196
Signed-off-by: Dave Barach <dave@barachs.net>
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: Ie5e6751fd791e7ca728522632332abe442a1a75b
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Iaf9735258f456574534c1a581b983326badea171
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch introduces following changes:
- 4 predefined pg/stream[0-3] interfaces are removed
- Interface naming is changed form pg/streamX to pgX where X can be
any u32 value
- one pgX interface can handle multiple streams
- keyword "source pgX" is added to "packet-generator add" command, X is 0
by default
- new cli "packet-generator capture" is introduced
- new cli "create packet-generator interface pgX"
Change-Id: I768d075b9d4a34f0b5073debdc5dd4a0880c682c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Previously, netmap node switched from interrupt to polling if
worker threads are enabled even if there was no netmap interface
running. Netmap input node consumed CPU cycles because of input
node calls but these cycles were wasted as input node did not have
any packet to process.
This patch fixes issue stated above using more intelligent way of enabling
or disabling polling based on interfaces count. But the pre-requisite
condition for polling is, worker thread(s) should be enabled.
Change-Id: I3a901823c7b040cce3393958981f439b9f290fe5
Signed-off-by: Mohsin KAZMI <sykazmi@cisco.com>
|
|
Change-Id: I6dda9eb8d58a2bc9a1e4d6636688dfa1f8bb88c6
Signed-off-by: Jan Srnicek <jan.srnicek@pantheon.tech>
|
|
Change-Id: I913c9807519aa10e515d12fcfbcbfc22b58f5839
Signed-off-by: Calvin <calvin.ference@gmail.com>
|
|
IPv4 static ARP entries should remain when interface is set admin-down
and be reapplied on interface admin-up.
Change-Id: Ic0051865154230c2561d6e6421b05d842f147ca7
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I6d224fe19f1e0dd7ad5659e0734bc96ba37337ff
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Idc71a48f2eab3b712f6953af8baf1a6ecd54dcaf
Signed-off-by: Calvin <calvin.ference@gmail.com>
|
|
Change-Id: I3fe83a511064d73087c4526ef33cd7628f15b90f
Signed-off-by: Dave Barach <dave@barachs.net>
|