Age | Commit message (Collapse) | Author | Files | Lines |
|
Peer fib index and nh fib index should be different when nh-table-id is
specified.
Type: fix
Change-Id: I4c8296adb5aeab1c0022bfc1046e9559331b79b2
Signed-off-by: Stanislav Zaikin <stanislav.zaikin@46labs.com>
|
|
There was already a basic type defined, but nothing more.
This implements callbacks similar to
ip4_enable_disable_interface_callback_t.
Type: feature
Change-Id: I34fcb146ca68af4eb8cdd244529eb149f884284d
Signed-off-by: Adrian Pistol <vifino@posteo.net>
|
|
The order of the parameters when calling the ip_neighbor_probe_dst for
an aged neighbor is wrong and given that it runs on the master thread,
probes for IPv6 neighbors were never sent, leading to a certain neighbor
strike out and death and its removal from the neighbor cache.
Change-Id: Ic021bd0ece05bd2c1c6ab90eab0e2dc27cb10360
Type: fix
Fixes: fd2417b2a42
Signed-off-by: Sergio Gonzalez Monroy <monroy@anapaya.net>
|
|
Type: feature
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ia81f1d8e706dbce9e57319d993bff595e6ba6f03
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ie90e4b02c268bc3ca40171b03829f5686fb83162
|
|
- Add support for @unittest.expectedFailure decorator.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: I761751cda505e962225dc680b97c1fffa96f5176
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- Make error message more human readable.
Type: improvement
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Iefc276b3a85ff82b927028a72bb91ed87ebd04ba
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: make
Change-Id: I2ee286985819974e02e34b8166c69ef7d767e47e
Signed-off-by: Sergio Gonzalez Monroy <monroy@anapaya.net>
|
|
Rename extra_vpp_punt_config to a more generic name extra_vpp_config to
better fit its purpose. It's fit for general use and already used that
way by quic and vcl tests anyway.
Type: refactor
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
Change-Id: Ib0a5789b0dbb3a8c3cae654dea4e32ac5e56dd41
|
|
The built stat_segment_data_t is leaked if stat_segment_access_end()
returns false.
Type: fix
Signed-off-by: Duncan Eastoe <duncan@graphiant.com>
Change-Id: I70adabbe7947d3e8a798cdfb3eaa14c683dce9da
|
|
load-balance and replicate dpos both store their number of buckets as
u16, which can overflow if too many paths are configured. For
load-balance it can happens quite quickly because of weights
normalization.
Type: fix
Change-Id: I0c78c39fc3d40626dfc58b49e7d99d71f9852b50
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Signed-off-by: Andrew Ying <hi@andrewying.com>
Type: fix
Change-Id: I3c428c90146387ad9ce291c7f646d74f06952b40
|
|
If openssl tls server handshake fails, track the fact that the context
does not have an app session.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5f493059a3610067b59caffbbe441ce9e0868252
|
|
When I setup vpp by netvsc driver, occurs the following crash:
(format_dpdk_device_name) assertion `(i) < vec_len (dm->devices)' fails
vnet[100166]: #6 0x00007f434d651f6a _clib_error + 0x2da
vnet[100166]: #7 0x00007f430b4bef64 format_dpdk_device_name + 0xf4
vnet[100166]: #8 0x00007f434d6555f3 do_percent + 0xee3
vnet[100166]: #9 0x00007f434d654359 va_format + 0xb9
vnet[100166]: #10 0x00007f434d7ac16e vlib_log + 0x3ce
vnet[100166]: #11 0x00007f430b49ebe3 dpdk_device_start + 0x193
vnet[100166]: #12 0x00007f430b4aa233 dpdk_interface_admin_up_down + 0x163
vnet[100166]: #13 0x00007f434d988fc8 vnet_sw_interface_set_flags_helper + 0x378
vnet[100166]: #14 0x00007f434d989338 vnet_sw_interface_set_flags + 0x48
This patch fix it by device_index as a index for devices vec, and not
dpdk port_id.
Type: fix
Change-Id: I84c46616d06117c9ae3b2c7d0473050f1b8ded5f
Signed-off-by: Daniel Ding <danieldin95@163.com>
|
|
On epoll ctl mod, set want deq flag before checking if unhandled events
are needed.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id1491837c7156a66c21e0e45af60b04b1c18601c
|
|
Reset deq notification flag even if session is no longer epolled.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I4e9aed1849aa2817176f3a54ae41910df5e704a0
|
|
Type: docs
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I57f27f8ec4be7f3d8dc3d13ff4ea6b1b21c3cf6b
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I9e6fd29c0e09406e48215f06977b2d4678650669
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Idba74f880a251dbeec2205ee41e16b40d4799b06
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic89256d16230593b61a7b3e29582444fb3f93e4d
|
|
This feature enables the use of the classifier and ip-in-out-acl nodes
to redirect matching sessions via arbitrary fib paths instead of relying
on additional VRFs.
Type: feature
Change-Id: Ia59d35481c2555aec96c806b62bf29671abb295a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I9971e69135e0652a36e4b4754774a43ea1d92e8b
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: Ib0ca3379439d6ee23e696f8f0840e6ddf42430b8
|
|
Type: fix
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Change-Id: Ie3f390be16df81f6824344034377f9a6f4fa9f92
|
|
format_hexdump currently requires the length parameter to be uword
(64-bits) hence all callers must make sure to cast the length to uword.
Use u32 instead to benefit from C automatic integer promotion: any
length smaller or equal to u32 will be promoted to int fitting in u32).
Only callers using a length of u64 needs to downcast.
It also makes it similar to other variants.
Type: fix
Change-Id: I09b52fdde3970cec0be4150a29126ff63106c75b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This caused that failed to create flow rule with rss types.
Type: fix
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I77696286a32804cbe884075cb027eec19eb5c7cb
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Add the missing AArch64 support for printing program counter.
Type: improvement
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: Idb63737ed72e10fa29fd61e1eab5af059e2b8e28
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8d3a1939870601297ecccf4cda6767510c2abfa5
|
|
In some cases with Generic FLow, it is only required to show the pattern
of spec and mask, but no need to add the flow. Therefore, add an option
in packetforge so that users can show spec and mask only.
Type: improvement
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I7b3040689eb82d0b58924712ee6fc9cfa0a42fa1
|
|
Print fib-index, next node index and opaque.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id2ff265c9acffc75f8b04fb9f26c6d571fc2ef98
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic28da52b9c8286f71e472ef6c3afc23d464f85b0
|
|
Prior to dpdk-22.11, VPP can count on rte_eth_dev_socket_id to return
numa node 0 if the device didn't set it. Ever since below patch is
committed in dpdk
https://patchwork.dpdk.org/project/dpdk/patch/20220929120512.480-1-olivier.matz@6wind.com/#152498
the aforementioned assumption is no longer true. If the device didn't
set the numa node, VPP gets -1 from the aforementioned API call. This
causes VPP to crash.
This fix is to set the numa node to 0 if the API returns -1, or SOCKET_ID_ANY
Type: fix
Change-Id: I2fde2870e5a3eb98473fe8d119fef594bfba9a8d
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ife5f72dc9587c9f6b8aa513cd039fa28bb22fca3
|
|
Move GRE folder under vnet to the plugin folder, and modify some of path
of the #inlude<header> to the new path.
Add a plugin.c file to register a plugin.
JIRA: VPP-2044
Type: improvement
Change-Id: I7f64cecd97538a7492e56a41558dab58281a9fa5
Signed-off-by: Chuhao Tang <nicotang@cisco.com>
|
|
In some cases an .api file may contain only counter definitions.
If so do not generate the setup_msg functions.
Type: improvement
Change-Id: Idf89a7a5ab135428e9577726bc356acfd7c30113
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
- remove non-inclusive language in message and improve
clarity of the error message
Type: style
Change-Id: I3f4895d6a502c2583a8b6b3c325a3f30ced03f84
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- Update rdma-core library to 45.0 to work with DPDK 23.03
Type: feature
Change-Id: I6bd54c509b93de905e1b0194dce414e4a6e11990
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This patch bumps DPDK version from 22.11 to 23.03.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I10203a6408ceb5a40fe392924130652b91ebc993
|
|
This patch prepares code for bumping DPDK version to 23.03, but the DPDK version of this patch keeps at 22.11 for compatibility.
the "no-dsa" parameter in DPDK configuration is removed, the "blacklist" parameter can be used to block the related DSA devices.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I589afba165e85138437e731531414a033f64f8d3
|
|
Type: fix
Change-Id: I23ef347adc97d7d806acf98c3dcdbe80f2a03441
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Make sure half-open table is cleaned up on close and cleanup of
half-open.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id7ad177f364d6395f7379dc927e449a40547510e
|
|
Update rdma-core library to 43.0 to work with DPDK 22.11.
Type: feature
Change-Id: Iad8bb9c7745dd5bc5f8c0935a31362fd92447ff6
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2d1976cb8061534a7e93d4dd2283abaf70a33f7c
|
|
After the clib_socket_init syntax changed, the behavior of VCL
socket creation was broken. This patch introduces app_namespace_add_del_v4
to address the behavioral change.
Type: refactor
Change-Id: Ice016bdb372233fd3317f166d45625e086e9b4df
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This change is part of VPP API cleanup initiative.
Type: refactor
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I9f0f786b50aa77383b16e0f844c85f236f7aa8d0
|
|
This patch bumps DPDK version from 22.07 to 22.11.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I82df2c0678e1cc1b3739a5b0677f0c4a4180a489
|
|
Type: make
Change-Id: I8983778b4c2f5123b27aeeb1fdc4721c8e9c9160
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I55731fa546df01ac4bd327b444ac1a5c2052bed1
|
|
A plugin can set "VAT_AUTO_TEST_ OFF" to disable building of the autogenerated
Type: improvement
Change-Id: I856fbfd83bbc5c7df0759e550b20ac75df77d9d7
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
traceroute sends 3 packets rapidly that triggers and depends on ICMP error
generation. The current ICMP4 throttle setting at 1-e3 throttles the last
ICMP error and makes traceroute sit in a timeout.
Type: fix
Change-Id: Ie886303600ad0374dcb6ae311e949154727a93d2
Signed-off-by: Ole Troan <otroan@employees.org>
|