Age | Commit message (Collapse) | Author | Files | Lines |
|
learn ARP peers if, 1) it's a reply to a local address, 2) we are sending a response to a request.
send proxy ARP responses only in the interface the request was sent.
Change-Id: I22b949c65122824233076492b7dd537daca07bc2
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit d5b6aa139856a1447f7bc5377058202110eaa4cf)
|
|
When the descriptor is chained via multiple parts, vhost is supposed
to reassemble the different parts to form a packet prior to passing
the packet to the next input node. However, bad packet was seen, having
bad ethertype, source, and destination mac addresses.
The problem was due to the destination pointer not being incremented as
each chain is processed. THe result was the first chain is copied to the
beginning of the buffer, the next chain is copied, then the last chain
is also copied to the beginning of the buffer. As a result, the ethertype,
source and destination mac, etc, are being overwritten by the very last
chain of the descriptor.
Change-Id: I78f9a91de68c85574047912576dcc311d7597e21
Signed-off-by: Steven <sluong@cisco.com>
|
|
This should avoid random crashes due to reception of packets (multicast
in particular) before ip6 addresses are configured on the interfaces.
Change-Id: Ibcf1a5a2ae2fa75f8b57da1b2f09f32c081210d7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9a46125e3cf9815c08cf8cca17713ec6e9121eae
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Ia91c3e8cb27b9e4c1cccefc0a4857dd9995450ab
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
(HC2VPP-137 is the client behavior triggering this)
If the user does not unapply the ACLs off the interface,
but deletes the interface, the subsequent reuse of the
sw_if_index might find itself with the datapath
hooked up for ACL processing even though there is
no ACL configured. The fix is to unapply any ACLs
in the callback which is called upon the sw_if_index
addition/deletion.
Change-Id: Icea413d7fbf1ef891844a4818626e1b34fe79cbf
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Fix a logic error related to timing out of the connections
following the active one. To avoid this class of issue in
the future, create corresponding testcases, as well as some
trivial sanity testcases for both IPv4 and IPv6.
Since these tests are timing-dependent and take up time,
mark them as extended tests.
Change-Id: I2c72bad5efda7db8aa9cb05801fe47928dc47927
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 57d7dbc8bf8a49ee2421fe97bd3ed7099d2384bf)
|
|
Change-Id: I6ce21317fcaa25781199f4329be815f076ab8b09
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: Ic95fe6179de1151796188813cc595187d4c842a0
Signed-off-by: Shwetha Bhandari <shwethab@cisco.com>
(cherry picked from commit 851a37a78f80427a910a9cb571e5a7d70c120e38)
|
|
Change-Id: Ie0548868154ef5e9bdc7a57a16f68284683ad9a5
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I36852524f8a8bb38031e4e7bf92828e89abbb984
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Id6c482cf01f49257a05600ae1458f5db09c13cf0
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ic5bd7da08f8a46b548d56516e4633f0b8badf2a1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I16606757176649e61f0a51895329586311144766
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I25a6882ec503fc5bb3694411fbdc2eb1f1e1fafc
Signed-off-by: Klement Sekera <ksekera@cisco.com>
(cherry picked from commit 6abbc2884a0d2006f2b7cc1d9f5b74cefbb7ac78)
|
|
Change-Id: Ie9f48a0d5e0a9cd08eb8f07d49149eee40f04131
Signed-off-by: Klement Sekera <ksekera@cisco.com>
(cherry picked from commit 0c8ad446db72078a2255329c2cfaced517829c78)
|
|
It is empty anyway and it is causing problems if dpdk plugin is not
loaded.
Change-Id: I7b49afec39c78cbaf0c57b50621fb3e6848e3469
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit 60750434fce12e320968a5bbc14cca080048ffd1)
|
|
Change-Id: Ifd6e9ce769297534f8de088f583c23ad3f2c51df
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ie554934b86ab24e82ca22680f6b3d772f5d6e8f9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I2881ae9c68a4edf60e83923e6409cbd767ada914
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Iec8fd4c2bd26874bd8bda82172af797e9b92592c
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I691d1bfb2923a07c0003485b1d0272aaf9ed27ee
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Iec67ae1232e346d5e0000e0b4c997fdc31865bc6
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I24139082c795ccdfe19d398637a287523ec7a4cc
Signed-off-by: Vengada <venggovi@cisco.com>
Signed-off-by: Shwetha <shwethab@cisco.com>
Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
|
|
tests). The DPO was incorrectly initialised with FIB_PROTO_MAX
Change-Id: I962df9e162e4dfb6837a5ce79ea795d5ff2d7315
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This add debug cli to accept SRv6 localsid that will be
used to attract the return traffic for M-Anycast flows.
Change-Id: I8f8dd115c36498141ae4cb143c6584141950b1d3
Signed-off-by: shwethab <shwetha.bhandari@gmail.com>
|
|
Change-Id: If884835c0f63de162ecf75fecd2a63a1240ee910
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Follows https://gerrit.fd.io/r/#/c/5681/
Should fix VPP-689.
Change-Id: I5514c3d2657f4ee0a932d14c80f55d1471f5d56f
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
we should not suppress arps on remote interface instead we should flood them to the local one
used shg != 0 to identify packets from remote interfaces and disable arp term l2 input feature for them
Change-Id: I701537c05df7451a25ccb5bfc9e2b03ea70cff20
Signed-off-by: Eyal Bari <ebari@cisco.com>
(cherry picked from commit a0623f8d26501a230801908cd4bc38d67a35dd23)
|
|
Set rxmode.enable_scatter field in DPDK port config parameter so ENIC
driver will use multiple mbuf's for receiving jumbo packets.
Also remove ENIC driver check to disable setting ENIC MTU as this
capability is now working with the new ENIC driver, subject to 9002B
limit.
Change-Id: I563976201c4968d4538c0759505cef2de876934a
Signed-off-by: John Lo <loj@cisco.com>
(cherry picked from commit 250b95b71babdfb558554c788a82cf45ccc34ab8)
|
|
Change-Id: I4e3df197eed33acbceaff495279def8716773303
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I97e03d98758a08b1f75a9a1f35f0181385a10ae8
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Ic7128d4f8a13c021e0fd4731a717193d050431d2
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Make BFD ARP-aware when sending out packets.
Fix a few one-liner bugs discovered while integrating with cisco
nexus. Enhance CLI view to better observe session state.
Change-Id: I266c29492f351207b84328ab665d9d697969da9c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Iff7e1562d395f1f2e000fa8c2e98bb85969479d7
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: Ib83baf6ddec4ac192f6b4123d9eb599fb370fd0c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: Id15b401223aabe7dacb7566c871ebefc17fbb1fc
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I190696da5555c05074ee0eee32eb914bd16e38fb
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
(VPP-682)
This fixes the previously-implicit "drop all non-first fragments" behavior
to be more in line with security rules: a non-first fragment is treated
for the purposes of matching the ACL as a packet with the port
match succeeding. This allows to change the behavior to permit
the fragmented packets for the default "permit specific rules"
ruleset, but also gives the flexibility to block the non-initial
fragments by inserting into the begining a bogus rule
which would deny the L4 traffic.
Also, add a knob which allows to potentially turn this behavior off
in case of a dire need (and revert to dropping all non-initial fragments),
via a debug CLI.
Change-Id: I546b372b65ff2157d9c68b1d32f9e644f1dd71b4
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
epoll was supposed to not sleep when timeout
is less than 1ms, but a typo made it not sleep
any time the requested timeout is lower than
1000 seconds (in practice, never...).
This patch replaces "1e3" with "1e-3", which
represents 1ms.
Change-Id: I731851b27a6bf6ab8e41586e017e94b962b09bf3
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: I1cd649e1d4582792f75d0db60a9524471fc76a9f
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
To line up with "show interface placement," recently added. Otherwise,
"show int" refers only to "show interface placement," which tends to
annoy the cash customers...
Change-Id: Iea9e3681aeb051e2b0e1ecbf06706d98af9a3abf
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 13ad1f02922858177915b1cb1450041d2e4d85de)
|
|
Change-Id: I1eab03525f234139ceefbc9b9895a35a03a56910
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
- use the counters in a private struct rather than node error counters
- ensure the timer for the non-idle connections is restarted
- fix the deletion of conn at the current tail the list
Change-Id: I632f63574d2ced95fb75c5e7fb588c78fb3cce1c
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I3f67d32d5d76069a27176deef6cba0c1a194b7ec
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
af_packet driver must check that VLIB_BUFFER_NEXT_PRESENT flag is set
when walking vlib_buffer_t next_buffer chain on transmit.
On buffer allocation:
- next_buffer is not and may contain a stale invalid value that
should be ignored if not overwritten by a valid value.
- VLIB_BUFFER_NEXT_PRESENT flag is cleared and only set
if a valid value is written to next_buffer.
Change-Id: Iebf76ce8eea24a0d63c7bf749e672d6a232c80e7
Signed-off-by: Jim Gibson <gibson+fdio@cisco.com>
|
|
Change-Id: Id3398bd4b7a56c168aaab37942b92715e19d4025
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- Fixed three coverity issues
- Linked SRv6 docs
- Moved sample plugin to examples folder
- Fixed bug with hash. Now everything is using mhash. Potentially in the future we want to do bihash.
Change-Id: Ie03a13c8fecb1e315e67d0596cbd23220779aaf2
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: If1c68fc63fa71fab198f2bf4f79bdd7a9841c2e8
Signed-off-by: shwethab <shwetha.bhandari@gmail.com>
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
|
|
Change-Id: I4c2a1a818f28d4c6cf52af45f3b7dbfa41d77ccb
Signed-off-by: Ole Troan <ot@cisco.com>
(cherry picked from commit afaa85f873a7bff1cf1e32c22f909af3018ccfee)
|