Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I49da8be88dd033aae1b190e8e2163069ef480442
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Icff3d688506e7658330db004c58bcfcac273fcec
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
During VPP compiling, the command “make build-release V=1” gives verbose output on dpdk part.
This is to enable verbose output on vpp part, with CMAKE_VERBOSE_MAKEFILE:BOOL=ON passed to cmake.
It would help to get more cmake compiling information.
Change-Id: I2b01c8e234beb3189fe401801ff339f224c14470
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
|
|
After the slave interface is removed from bond, bond input node still receives traffic for
the slave interface.
We have to disable feature arc for the corresponding slave interface.
Change-Id: I44e7001e6685e290b032c48147d02911a55d547b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Under extreme condition, it is possible for input node to have more than 256 packets available
to process. Add a check to the while loop to prevent overrun buffer_indices and nexts.
Change-Id: Id9830e5c254f04216eb79e864a5460e08cf2e4e5
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I47e1fc789ddf3dbfdf9768b99d5c3a8804d6b750
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I630f3da1ea4e6e50a50f1352c097becef1efe3c0
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: If7ac5b41ca4ac602a100b616b37d07f658fd6a90
Signed-off-by: jdenisco <jdenisco@cisco.com>
|
|
Change-Id: Iedd79eeba35fb7385c03a177f8ac7d3ddfeb6a84
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ifa4fceef7edbe43d444790a624957db0817064de
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4a1dca92a69547f8b26e9aec7574332f39e43c37
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If833680149eb33db6adc836c5330f350042869f4
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4a70c7df8f0cb368a4e1cb16f30eeef5c6058c79
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I085615fde1f966490f30ed5d32017b8b088cfd59
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Ib0a06ab71aed42eb5bb2ab2edf4844b2167e0610
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I0f805ae47f6e9465070a54d85f164bc74877af01
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
'‘for’ loop initial declarations are only allowed in C99 or C11 mode'
Change-Id: Id842382f884122555abaa936c56cdfd305f2a5f3
Signed-off-by: Khers <s3m2e1.6star@gmail.com>
|
|
Added an interrupt line for monitoring and notifying hardware link status
Displayed additional information for show hardware for vmxnet3 interface
Fixed possible garbage display on interface name for show vmxnet3
Change-Id: If457bfe7c216287fb3a4e2630f00434d595f387b
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: Ie5d85af84ae0d8b15edf5962213ed1b1953bee2f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I15b3e51d6e0206f4a387eb2ce764914167149385
Signed-off-by: Tibor Král <tibor.kral@pantheon.tech>
|
|
Change-Id: Ia3ce24cc94f9b2fb331ad62a4181ddcd41bc78ca
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I114e93b6bc71cfcdcfe6d3ddde26f77118e36ab8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ibe57abc7d2a06be80146ce28edf4c60ecda991eb
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
DBGvpp# show vhost-user
Virtio vhost-user interfaces
Global:
coalesce frames 32 time 1e-3
number of rx virtqueues in interrupt mode: 0
Interface: VirtualEthernet0/0/0�?x�D (ifindex 3)
The fix is to use format_vnet_hw_if_index_name rather than hi->name. The former
format the name with %v rather than %s
Change-Id: If4d275e1eb249cf87b2d6b796b42f24769f9e3e3
Signed-off-by: Steven <sluong@cisco.com>
|
|
Call the BV (value_free) when we have performed the rehash
and thus no longer need the memory that old value for the
bucket refers to.
Change-Id: Ibb82174fc8002aeb3e1a6c8d1f90293d73bc45d8
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
We need to have new tenants in the development package.
This is first of series of patches which will allow us to have multiple
external libs and tools packaged for developer's convenience.
Change-Id: I884bd75fba96005bbf8cea92774682b2228e0e22
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
change the ADD api so that is returns the 'ID' that can be used
by the client to read the stats from the stats segment and to
delete the object. Previously a similar value used required
to be chosen by the client, now VPP allocates one (like it
does e.g. for interfaces)
Change-Id: I563cf6092276eb990c52d5457c86e72546bcf69e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I397715ea8c1966f5ee61128f284d62d875c568e1
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Have applications use explicit flag to request events from vpp when it
transmits from a full fifo.
Change-Id: I687c8f050a066bd5ce739d880eaec1f286038d95
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
route ADD API changed to return the stats segment index to use to read the counters
Change-Id: I2ef41e01eaa2f9cfaa49d9c88968897793825925
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Two flags to disable mergable rx buffers and indirect
descriptors are added to api.
Change-Id: Iba0ee9c48d19dfc3d3420a3fdaf44a1a1d325e99
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I36ece2ef2eaef9fa559d69ec7f7f07e7c16a7a9d
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
chain buffers
If we invoke the subject API with 2 buffers, each with 2 chains, the content of
buffers[0] should be head of 1st buffer, and content of buffer[1] should be
head of 2nd buffer.
What the code did was to put
buffers[0] = head of 1st buffer
buffers[1] = next chain of 1st buffer
buffers[2] = head of 2nd buffer
buffers[3] = next chain of 2nd buffer
This is wrong and can cause crash.
The fix is to only increment bi when the entire packet is found which may consist
of multiple fragments.
Change-Id: If02cd5186a039d7a6c08a0959112840bdb242317
Signed-off-by: Steven <sluong@cisco.com>
|
|
The previous version sent the whole VPPTestResult object through pipe,
which uses pickle to transfer objects. Pickle does not support sending
any arbitrary objects and was causing issues. Now just a tuple of
(test_id, result) is sent.
Change-Id: I3a3a9e6f1b9ac9b05889babfc1f7560c7ac4471c
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
ffb14b9554afa1e58c3657e0c91dda3135008274 has changed the semantics
of alloc_arena_next to become an offset off alloc_arena, but
in the available memory check in BV (alloc_aligned) it still treats
it as a virtual address, resulting in the check always succeeding,
thus over a prolonged period bihash arena allocator
potentially overwriting whatever is following the arena.
Change-Id: I18882c5f340ca767a389e15cca2696a0a97ef015
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I13dc5eab8835c4f3b95906816d42dccfeee8b092
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Warning messsage is displayed in system log:
vpp# show log
1970/ 1/ 1 01:00:01:198 warn dpdk unsupported rx offloads requested on port 0: scatter
Change-Id: I40021066daf2d37ca5233e3adce55e412f0d3932
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I487b3b480347f60ffe3af4029adfb22b6700cea7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Instead of relying on main epoll loop to send messages, try to send as
soon as possible.
Change-Id: I27c0b4076f3599ad6e968df4746881a6717d4299
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ied0fc50f1afb0f7fc563784544699726a6d03380
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
Change-Id: I6201a044e70ab6a58db8212960c57edc77c41f96
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: If094971cf011d09fa0daf3ff393f490e584c1151
Signed-off-by: Yichen Wang <yicwang@cisco.com>
|
|
Support feature arc
Support set interface next node
Enqueue packet to either ip4, ip6, or ethernet_input based on packet type
Change-Id: I11fb6bba98ee0bfa1d057474fc6cf3be48ef1c48
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I9a6076aa53d810ec44761d9f9459eb91f2c05974
Signed-off-by: jdenisco <jdenisco@cisco.com>
|
|
Change-Id: I63f747e92d239e878550392df24fb7aac2b5a3e3
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
The scatter/gather rxmode flag was set for ENA when building
against DPDK >= 18.08. ENA does not support this, so disable
it. It looks like enabling it was a copy/paste error.
Also, after offloads are adjusted based on whether "no-multi-seg"
is set, those configurations are overwritten by copying
port_conf_template over the port config. That should only happen
for versions of DPDK older than 18.08 because 18.08 and newer
make changes directly on the port config instead of making changes
to the template. Make the clib_memcpy() conditional on the DPDK
version being less than 18.08. After doing so, compiler
errors complain about port_conf_template being declared but not
used, so make it's declaration conditional.
Change-Id: If81980d71c379a565b51dd700b953f8c811a8703
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I4d586456c46994b60ff7670d1411997a3615a284
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I6a4335654882a2ca66d3d465e35e350868242b8d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I2135f3e77206fd171636a1e0b07c373c0bf093e4
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Iad0b0315fbd493b67e6ca490206ec8e8422790ea
Signed-off-by: Ole Troan <ot@cisco.com>
|