aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-09-21crypto: revert crypto set handler all APIYulong Pei1-36/+3
This reverts commit 8c91b2ae2b32d428ef35605707788fe064621cb3, but keep a comment fix. Type: fix Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: Ia66941bf18d3efac96f41bdf905d877cfb3ab211
2020-09-21session: use wrk instead of thread index in nodeFlorin Coras1-10/+12
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia36d86eb108f0651fc3af8b4dbdc2d0b49e283da
2020-09-21geneve: Move to pluginNeale Ranns15-74/+146
Type: refactor Change-Id: I613bf4d6517591351b212bfe6c8d93abf235f5dc Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21misc: Move l2tp to pluginNeale Ranns16-502/+385
Type: refactor Change-Id: Ifb36eeb146b87e9e305881429d32d6879e955e1e Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21lldp: Move to pluginNeale Ranns19-220/+239
Type: refactor Change-Id: Ifd770ff4850e63474bf4682ad463021b03786b4b Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-21vrrp: set up multicast for both address familiesMatthew Smith1-2/+14
Type: fix When a VR is added, multicast accept routes are added which allow inbound packets sent to the VRRP group address on the interface of the VR so advertisements from peers can be received. If this is the first VR added, also add a local forward route for the VRRP group address so the packets will be processed by the VRRP input nodes. When deciding whether to add/delete the local forward route, the total number of VRs configured was being checked. If there are no VRs configured initially and a VR is added for IPv4, this check would correctly see that this was the first VR and add an IPv4 route. If an IPv6 VR was configured subsequently, this check would find that a VR was already configured and incorrectly decide that no route needed to be added and IPv6 VRRP advertisements from peers would be dropped as a result. The opposite would occur if you first added an IPv6 VR followed by adding an IPv4 VR - whichever address family was added first would work correctly and the other one would not work. Since a route is needed for each address family, check on the per address family count of VRs when deciding whether to add/delete the local forward route instead of checking on the global count of VRs. Change-Id: I851a7ef8a4f9e4e370d08b0832284a13387eb083 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-09-21ip: use main heap for mtrieDamjan Marion3-69/+3
Main heap can be hugepage backed so it is more efficient to use main heap instead of allocating special heap just for mtrie.... Type: improvement Change-Id: I210912ab8567c043205ddfc10fdcfde9a0fa7757 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-21acl: remove custom ACL-plugin heapAndrew Yourtchenko7-232/+17
Custom ACL-plugin heap was useful in early stages, but it interferes with other infra optimizations. Remove it and use global heap. Change-Id: I2300548f1d1798dec27bc5a2a41cf37f9fcda95d Type: improvement Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-09-21dpdk: hugepage availibility check using new apiDamjan Marion1-11/+9
Type: improvement Change-Id: Iab623a2e11bd5787f4cae549143f49888e0dd9c4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-21build: touch files when extracting rpm tarballsDave Wallace1-2/+5
Type: fix - Long story short, intermittently centos jobs have been failing with clock skew issues. When someone commits a patch on a machine with the date ahead of UTC, then clock skew will be encountered when extracting the RPM source tarball. See [0] and [1] for details. - Replace 'make bootstrap' with 'make install-dep' in RPM package build specfile. [0] https://unix.stackexchange.com/questions/164807/does-git-archive-use-the-wrong-file-timestamp [1] https://git.fd.io/vpp/tree/Makefile#n380 Change-Id: Iebfb9eb2e26c1f2e4488e871da86d0c60b9f4048 Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2020-09-21build: remove opensuse build infraDave Wallace13-470/+9
- VPP on opensuse has not been supported for several releases. Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: I2b5316ad5c20a843b8936f4ceb473f932a5338d9
2020-09-18session: grab worker barrier for sapi msgsFlorin Coras1-0/+5
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I7cdbcfeb6f77a720e190daf9fe555320e586bba8
2020-09-18dpdk: prevent linking dpdk against libbsdMohammed Hawari1-1/+16
If libbsd is detected by the DPDK build system, DPDK does not provide implementations for strlcpy and dynamically link against the one provided by libbsd. When the DPDK plugin is loaded by VPP, a crash occurs because libbsd is not loaded by VPP. Type: fix Change-Id: Ib691bbe27edcf0f6f0a3d39952e439027cef72cb Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2020-09-18build: missing deb pkg on ubuntu-20.04Dave Wallace1-1/+1
- The vpp build on the ubuntu-20.04 executor failed due to the package 'dh-python' not getting installed by 'make install-dep' Type: fix Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Id9307ad1b4e34c413d90258c6bde2aa5afafec63
2020-09-18fib: skip byte swap on n_paths in mroute detailsMatthew Smith1-2/+2
Type: fix While preparing to send a ip_mroute_details API message, the number of paths for a multicast route is stored in an int in send_ip_mroute_details(). Before the value in the int is copied into the field n_paths in the API message, the byte order is swapped. This results in n_paths getting set to 0. Change the int to a u8 and omit the byte swap so API clients can receive data on multicast route paths. Change-Id: Ie6dcb0f7b135c5b5deeeb2e44147560dbbb12507 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-09-18vat: add infrastructure to align vnet test code and plugin test codeOle Troan14-519/+486
Split vat/api_format.c also for VNET features. Use auto-generated VAT test code and support dynamic message ID allocation as for plugins. The arp and geneve features as Guinea pigs. Type: improvement Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: I461591496766bdf10c5f950fd30f1a0ae05909da Signed-off-by: Ole Troan <ot@cisco.com>
2020-09-18vlib: add decrement counter methodSergey Matov1-0/+19
Currently there is no way to decrease simple counter. To extend counters API new method allows to decrement counter by given value. This might be useful in implementation of statistics stored in stats segment. Type: improvement Change-Id: I7c08c62bffa6a2d50e9e2cf884f7b2d48538f34b Signed-off-by: Sergey Matov <sergey.matov@travelping.com> Signed-off-by: Dave Barach <dave@barachs.net>
2020-09-18tap: do not use strlen on vectorVladimir Isaev1-2/+1
sanitizer complains about strlen on hi->name in tap_dump_ifs. hi->name is a vector which is not null-terminated, so use vec_len. Type: fix Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: Icdd5f65369bb51b0c4a9cd86c24899e6febd837c
2020-09-18session: fix vpp exit abnormal due to application as a proxy server with ldpfanyf1-1/+9
Type: fix The function of application_setup_proxy() be called when application run as a proxy server, "app_wrk->first_segment_manager" be realloced in this function, but variable of "sm" point original memory location. Signed-off-by: fanyf <fanyufei521@outlook.com> Change-Id: I753c9fb60d1c0794d5eede9f3fab48381a802e3c
2020-09-18dpdk: call the meson-based build instead of MakefilesMohammed Hawari2-271/+220
Type: feature Signed-off-by: Mohammed Hawari <mohammed@hawari.fr> Change-Id: I576d92605da6d43e9b9f12238b18a518a0d69385
2020-09-18virtio: fix txq lockingBenoît Ganne3-2/+23
Initialize txq lock only if some txq are shared and check if another worker is already operating on the txq before processing gro timeouts in input node. Type: fix Change-Id: I89dab6c0e6eb6a7aa621fa1548b0a2c76e6c7581 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-09-18vpp: make main heap page size configurable from startup.confDamjan Marion3-15/+74
Type: improvement Change-Id: I190c6896152c626aa7cb1055cfce5d9cfcd5b68b Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-17stats: configurable page sizeDamjan Marion7-91/+163
Type: improvement Change-Id: I9973bce20a0a2a8a7e227cf96518de5b79374425 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-17teib: Use ip_address_t not ip46_address_tNeale Ranns9-149/+116
Type: improvement Change-Id: Ica75c4e43d6198658a1954640c7ac56ea68bb39a Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-17vlib: show FD in 'show memory map'Damjan Marion3-4/+15
Type: improvement Change-Id: I04752c011e4ca58f56aa53f6ae27bae93a5c4590 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-17teib: Add adj-fibs for peers/adjacencies on p2mp interfaceNeale Ranns9-39/+310
Type: fix Change-Id: I6fdc4e952097e92ac3aa53e0be3ef99e0d801b28 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-17vlib: map thread stack instead of allocating them from heapDamjan Marion2-30/+18
Heap may use different page sizes so we will not be able to create stack protection page. Type: improvement Change-Id: Ibb35c9f0a151c464ee0167d17f2bd773ef6f530b Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-17vppinfra: support main heap with different page sizesDamjan Marion9-84/+498
Type: improvement Change-Id: I381fc3dec8580208d0e24637d791af69011aa83b Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-17vppinfra: detect memory attributes on clib_mem_initDamjan Marion3-4/+82
Type: improvement Change-Id: I298aadfdf17d98dfb1ada1ec4f87e0821e6aeb7f Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-17vppinfra: allow handoff to main threadDamjan Marion1-18/+16
Type: improvement Change-Id: If2e907967c9b75997b581ff0c058bd5c15e823f5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-17vcl: avoid heap use for ldp debugFlorin Coras1-5/+5
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I798db694bdc63ae3a6e28d1908245b5ea0bfa84f
2020-09-16avf: wrong argument passed to avf_log_errSteven Luong1-1/+1
Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ica4601c9d17e182cbc348989a9f75ab1cb18b78a
2020-09-16vppinfra: introduce clib_mem_mainDamjan Marion6-32/+70
To hold more data later... Type: improvement Change-Id: I4006d22dcacd788988c4907f2c263fd4e4a9d398 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-16vpp: fix main heap initBenoît Ganne1-4/+1
NUMA node parsing with vlib_get_thread_core_numa() can failed on single socket systems. Use clib_get_current_numa_node() instead as we already pinned the main thread to the requested core. Type: fix Change-Id: I22339516d0305689a58584c92ded7c96eb53be39 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-09-16vmxnet3: gso fixesSteven Luong4-13/+29
outbound: wrong header len computation gso size and header length need to be set in the first segment of the chain inbound: EOP may have zero length descriptor to terminate the chain missing endian conversion for ethertype Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Iaa003c0e9af3ead4df6c6c0d5772a179d2ff15c4
2020-09-16vcl: refactor bapi client index for sapi reuseFlorin Coras6-23/+29
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ibebb6f7d4e610570693e213acd2f6d9332c563c6
2020-09-16vppapigen: crcchecker: report in-progress messagesAndrew Yourtchenko1-0/+6
in-progress messages do not give any API stability guarantees, by design, to allow easy iteration. Provide an easy way to know which messages are in-progress. If as a user you see "in-progress" message that you want to use in production, please contact the feature owner and discuss the path to removing the "in-progress" status before that. Change-Id: I27729995e26a70af373e642b871dbb5cc5526959 Type: improvement Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-09-16crypto: Crypto set handler API to support set all as CLIYulong Pei2-4/+37
Type: improvement Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I43556f8c76c7aae64d9c927e1fda3c1774d7e49d
2020-09-16misc: fix the formatting styleMohsin Kazmi3-9/+10
Type: style Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Id86e16677564669b0295bbb9fc1303fe39a21b6f
2020-09-16api: clean up use of deprecated flagOle Troan7-20/+20
The syntax of the deprecated flag has evolved. Clean up usage to be "option deprecated;". Type: fix Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: If2b639f275eb8db58b36c457f9245fe35a4d8cb1
2020-09-16vppapigen: crcchecker: report deprecated messagesAndrew Yourtchenko1-5/+15
Report if the messages were marked as deprecated, but not yet deleted. Useful for building the release notes and comparing between the releases. Also, put the dict_compare() call into the report(), since latter always consumes the output of the former. Change-Id: Iceab3e94ff66da931a4669b612026bd162dd5d1a Type: improvement Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-09-16flowprobe: add show commands for params and list of interfaces for recordingjan_cavojsky1-0/+87
Type: feature Ticket: VPP-1861 Signed-off-by: jan_cavojsky <Jan.Cavojsky@pantheon.tech> Change-Id: Iaeff13b19a712257223a4e77893cfd9398c18327
2020-09-16docs: improve plugin developer's guideDave Barach1-5/+55
Topics added: disabling lightly-used, experimental, or test plugins by default. Discourage folks from creating bihash tables, processes etc. from VLIB_INIT_FUNCTIONs. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I1235d64971e9ed50f992b75f96b77c934168276a
2020-09-16tcp: make max gso packet size configurableSimon Zhang3-2/+8
Type: improvement Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I14de90f07d825c5c99023996a88173ee855e9a6f
2020-09-15lisp: fix lisp|one_eid_table_dump's local|remote options in vatOnong Tayeng1-1/+1
The local|remote options to vat's lisp|one_eid_table_dump api command does not print the eid details instead it produces the following error messages: Filter error, unknown filter: 1 Filter error, unknown filter: 2 Type: fix Signed-off-by: Onong Tayeng <otayeng@cisco.com> Change-Id: I000c290b400dbf39bd883d57115923167092c9bd
2020-09-15crypto: Crypto SW Scheduler Coverity WarningsNeale Ranns1-1/+1
Type: fix Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: I7f98d0c7847ecc40b90b78e5ae83f320575be310
2020-09-15crypto-native: fix issues detected by coiverityDamjan Marion2-3/+11
Type: fix Change-Id: Id61aa407eeeb4d44cf47ed39283a0c79ed3abbee Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-15build: fix the the build on centos/rhel 8Yichen Wang2-2/+2
1. Remove uncessary runtime dependency; 2. Add missing build dependency; 3. Fix runtime dependency for api-python3 RPM; Type: make Change-Id: I2700f1a15112effba8d1527aca6467158f81f486 Signed-off-by: Yichen Wang <yicwang@cisco.com>
2020-09-14l2: allocate l2fib only when neededDamjan Marion5-10/+99
Currently l2 fib allocates 512MB hash table unconditionally on startup. This patch postpones table creation up to the point where first interface is put into l2 mode or mac entry is added. In addition it reduces default table size to 128MB and increases number of buckets 4 times. This default setting should be enough to keep 1M mac entries. Also, new startup.conf section is added which allows user to change memory and bucket size. .i.e: l2fib { table-size 512M num-buckets 524288 } Type: improvement Change-Id: I2a29209aa3545181f0087544c97a54d8157b6ec5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-14session: del app worker on socket detachFlorin Coras1-5/+11
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ic904abedcd270c95e782159170d457bc396424a0