Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I6e5ed2562c65dde6c9f6f085c8b9d40f80684894
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Ida11bddb52268e0e8513b7b379eeed6103bd48f1
Signed-off-by: John Lo <loj@cisco.com>
|
|
The loopback interface should use vnet_interface_output_no_flatten so
follow-on buffers of a jumbo packet do not get put on the output frame
and be sent back to ethernet-input or l2-input node.
The replication_recycle_callback() function should not assume follow-on
buffers of a jumbo packet are on the buffer free list.
Change-Id: Ide646a6d9b43e82782c0581ea3022a9e70f82582
Signed-off-by: John Lo <loj@cisco.com>
|
|
- consistent use of hash_*_mem methods.
- tunnel setup copies the key from the wrong location
- remove extraneous storage for keys copied from the vxlan
node that is not applicable here
Change-Id: I419fd30a52ba387104abe467c296de85233823d1
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I5aef12d3a9c8daefff52e5f958c504f5d2ff9fd0
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Check duplication locator and clean after locator when remove it.
Refactoring locator_set code.
Change-Id: Ib83cbcddc7a363a60fa5b6a366203d0dc0ea7ca6
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
Change-Id: Ia6eaaa9a741e84cbd0ff957cfd9a7143a3d0a977
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I4913fe6c4b1280939147887896aea9b79a9f7f10
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
When af_packet signals the kernel that there are packets in the tx
ring with sendto() the kernel sometimes responds with EAGAIN.
Previously the af_packet driver would treat any error from sendto()
as fatal.
Whilst there's not much we can do about this, count the errors
and let's try to not die on the spot or sit in a loop forever.
Change-Id: Id76ba5e07b744f1ed6f348ec838a1ac506a381c9
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I0e985b079da3224f4886e3ee2cece4d046e291eb
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I4210b3320d3fe841ba7ff1349b6a52affc047338
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
The VXLAN add_del API sometimes rejects calls with
VNET_API_ERROR_SAME_SRC_DST when the two parameters are obviously
different. This is because the API code is checking the "is_ip6" flag in
a not-yet initialized area of memory leading to random results.
Also fix help text for vxlan_add_del_tunnel in vat.
This does not change the API; it repairs intermittent failure.
Change-Id: I41863694f478c1f669078f82f69d8cca4841c989
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I6e6940c8467a331b37da153bb8a2154c1d165261
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I3ed6269f9a307b50b56ce04defc2576a139c6add
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
This is preparation work for moving DPDK
EAL and mempool initialization to vlib.
Change-Id: I2dc35aa53edec0e07fc2650d630aa625831154c3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ib95338d7055dea9036eddb7dff5ca7ccbcb35639
Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
|
|
PatchSet4: consolidate code as per comments.
PatchSet3: simplify the code using ip_udp_encap_one/two
PatchSet2: consolidate comments and indent style
Change-Id: Ia8b43f854a46d77e838e198566200ad28fd72472
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: Ic67b3c0623d98c5ee3f1ffa1e1bd9cfb96b233bd
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
Change-Id: Ib283c75505b787f715e34f5b325dda8a6c2fa125
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Available only in vpp_lite platform
Change-Id: I09d112af5f7f4521ec25196ecdd8c02c20eedd5f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The current location in the vnet dynamic library does not override the dpdk
weak function as intented. Moving this function to the main app allows the
linker to find the non-weak symbol and override it.
Change-Id: I96c6dc5af2e511cc1f84bd66419c5a4ac96a9541
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
|
|
Change-Id: Ia58923c7c98dc04c027c8c5879a4dc5f5b144b8a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
When the CLI is used to create an interface, and whend the operation
succeeds, the newly created interface name is printed-out.
The patch includes the following interfaces types:
- AF_PACKET
- Vhost User
- Netmap
- GRE
- L2TP
- MPLS-GRE
- Loopback
Change-Id: Id518c139ec63a261eae81d2ed95c4cd1f10b5157
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: I8a3770f8f1cd1fde6765b81d35aacaaf4ff98b82
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Simplified construction, autoconnected; possible connect/close
See updated sample test cases with changed interface usage
Change-Id: Ib53e855880bc414868aa2b9bb8f5df086917e375
Signed-off-by: Tibor Sirovatka <tsirovat@cisco.com>
|
|
Change-Id: Ic4009cdbac67b7cd53c88079439496b9d9dfaa35
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
if_name collides w/ ietf-interfaces.yang member name, causing a build-break
in an existing yang-model-based app. Rename to "netmap_if_name".
Change-Id: Id386eacd77343dd15a868c28dacd2b0e4523bc9b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
.../packages/dpdk.mk must not set $(TARGET). The Makefile fragment
really only needed to use a temporary variable to control the
dpdk Makefile. Simple fix: set $(DPDK_PLATFORM_TARGET) instead.
Change-Id: Ieb61b603bc36ed708a1b1237dc6bc503e90a0b7b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Tunnel dst is incorrectly being set to the requested src address.
Change-Id: I44e2ee475f0572e78d148951c5d4684e85e08ce7
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
JIRA: VPP-67
Change-Id: I8fced60a884f1585b1f51002832d47631eea9571
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
When re-locating our current viewport into the pager buffer we need to
verify that the new viewport is within the boundaries of the index.
This condition is considered very rare, but nontheless the check is needed.
Unfortunately I assumed the variable was signed; it is not, and the
subtraction can in some cases cause the value to be negative. This is
therefore a bonafide semantic error that may cause problems.
This patch reworks the logic to avoid having to change it to be signed.
Change-Id: I26f0747d38dcc43dd9c092d50f2489b122009e7b
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I1d91c9982823758059f9d6aa699982253930e7ba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
* compiler -march= parameter is changed from native to corei7
so code is always genereted with instructions which are available
on the Nehalem microarchitecture (up to SSE4.2)
* compiler -mtune= parameter is added so code is optimized for
corei7-avx which equals to Sandy Bridge microarchitecture
* set of macros is added which allows run-time detection of available
cpu instructions (e.g. clib_cpu_supports_avx())
* set of macros is added which allows us to clone graph node funcitons
where cloned function is optmized for different microarchitecture
Those macros are using following attributes:
__attribute__((flatten))
__attribute__((target("arch=core-avx2)))
I.e. If applied to foo_node_fn() macro will generate cloned
functions foo_node_fn_avx2() and foo_node_fn_avx512() (future)
It will also generate function void * foo_node_fn_multiarch_select()
which detects available instruction set and returns pointer to the
best matching function clone.
Change-Id: I2dce0ac92a5ede95fcb56f47f3d1f3c4c040bac0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
JIRA: VPP-66
Change-Id: I421529fa8eafe5268745a34a4fcd40156defcdf8
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
* adds support for VPP native PCI drivers using
standard uio_pci_generic kernel driver
* adds generic PCI interrupt callback
* splits code to generic PCI handling and linux specific
* adds new debug cli 'show pci [all]'
Change-Id: I447c2285e319e9725d70688c1b70c9dedda51fdc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The nature of Java artifact versioning is different
that rpm/apt versioning in that artifacts are
traditionally numbered:
${NEXT_RELEASE_NUMBER)-SNAPSHOT
This patch sets ${NEXT_RELEASE_NUMBER) correctly for master.
Change-Id: Iab34c26c7440d5e04d6d05f46598832e9adf6920
Signed-off-by: Ed Warnicke <eaw@cisco.com>
|
|
Allows DPDK parameters to be overriden from the platform
definition.
$(PLATFORM)_dpdk_arch = "armv7a"
$(PLATFORM)_dpdk_target = "arm-armv7a-linuxapp-gcc"
$(PLATFORM)_dpdk_make_extra_args = "CONFIG_RTE_EAL_IGB_UIO=y"
Change-Id: I8c0f233942744cb82ca3ed2d65e33acee845cb4e
Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
|
|
In vnet/vnet/devices/dpdk/device.c, post 2 event data instead of
merging them into 1 u64.
Change-Id: I8b1d61b894279fb6eb57bb82a05affc14360e6b8
Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
|
|
On non numa aware platforms, the path "/sys/devices/system/node/node%u"
does not exist: the "free_hugepages" count is available in "/sys/kernel/mm/".
Change-Id: Id62018a2bd0937d267663699c620e89d02c26a72
Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
|
|
Change-Id: I1470993668fa8c740229149bbb227bd1e410d5ab
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7d622e591020a482af68667f4d1ed2056258d2c8
Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
|
|
To better handle lines longer than the terminal width, re-work how
the pager collates lines. We still store each output line in a vector
or lines; additionally we index the start and end of displayable lines.
The index then becomes the data to work out what to display.
If the terminal is resized this index is rebuilt and the current page
redisplayed and an attempt made to keep the current top-of-screen line
in place.
Change-Id: Icc6f4f72dabad89682cd82be88adb03eadb7811d
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: I76359b621b2edc599cf2e9ee845d97293a5d46f7
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
- Had issues with original patch and CSIT, breaking into
-- Makefile and API changes
-- Follow up patch removing NSH directory
Change-Id: I6c2f49a74d59b97ce4ea43799cc6f01f5cb1d5a2
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: Ib3e10fd4c27dde4f90b8d156f0c8547787ad46e2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I73ecc12224fdfb08b7aa6118761b368577ce33d5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
JIRA: VPP-67
Change-Id: I04560d78e2eb131cd6cc31472b70b3d3e8fdd79a
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
The classifying capabilities are pretty limited if only a single table can be used.
This patch adds support for chained classify tables to L2 Rewrite feature.
Change-Id: Ib678fe2028f17b441adb75d85bf3e31185e42c59
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
It appeared to me that it might be usefull
to allow users to create fibs or bridge domains without
a complete knowledge of the current used IDs.
These changes define fib and bridge domain constructors
when the provided ID is ~0. In such a case, an unused ID is
used to create a new fib or bridge domain.
Change-Id: Iaba69a023296e6d17bdde45980f9db84832a3995
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: Icd1f8952f66d3cee027c59f3148c67f1839de306
Signed-off-by: Chris Luke <chrisy@flirble.org>
|