Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: Ic0fa4f83048a280a7d1b04198c0f903798562d2d
|
|
Type: improvement
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Change-Id: I10141033030342881298d70742fa5bdea402b4c9
|
|
Type: fix
Change-Id: Ibc476b807ba0310f0cc926b0e386831ef0cbcc25
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: I91f72f5802db195d1a15424d67c1b6e518168f9f
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: improvement
Change-Id: I9ce7e1ee7e7afe8e9befe36ae8c59291beaaaf36
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Currently when a new TAP/TUN device is created from tap_create_if()
via the TUNSETIFF ioctl(), a name is allocated by the kernel (eg.
tap0). If the caller supplied a name this is subsequently set via
netlink, after the device has been created.
Now we request the kernel to create the new device with the caller's
requested name in the first instance, thus avoiding the need to
rename the device, and therefore avoiding a window where the device
exists with a different name.
This can be beneficial, for example, when writing systemd-udevd link
files [1]. Having the TAP/TUN devices created with the requested name
ensures they can be correctly matched by the OriginalName option.
Writing link files might be necessary, for example, to avoid VPP and
systemd-udevd racing to set the MAC address on a newly created TAP
interface. systemd-udevd can be configured to not manipulate the MAC
addresses of matched interfaces.
These changes also resolve an issue where the created device would not
be renamed if the caller requested it be moved to a different network
namespace, since vnet_netlink_set_link_name() was not called in that
case.
[1] https://www.freedesktop.org/software/systemd/man/systemd.link.html
Signed-off-by: Duncan Eastoe <duncan@graphiant.com>
Change-Id: I3d657632856d03979d6b914225c3c841c379e0a1
|
|
This commit allows a non-VPP thread to request VPP to gracefully
shutdown and return a specific process status value.
Type: improvement
Change-Id: I9bf52b789e7ee28eb272630eaea495fd94349f79
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Change-Id: I97fa566612641f78c2e9850a251cfe9f2d7cfde1
Type: docs
|
|
Type: fix
The init of fib_index_by_sw_if_index wasn't
setting default value to 0. Which we now
need for setting interfaces unnumbered
Change-Id: Ie5be9b5e5373ef055557a871ad4d1c45fbfc1dee
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
When epoll_wait return -1, access array epoll_events[i] out of bound
and lead to segmentation fault.
1. Change return value to signed return value
2. Skip non fatal error e.g. EINTR
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: I4ece118999402ec6054baf0efb52419151655def
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id0e67a9ce9c5d8bca2cd7a30493f03a02a46dc46
|
|
CLIB_PREFETCH (cop[1], CLIB_CACHE_LINE_BYTES * 3, STORE);
Note on 64 bytes cache line size arm machines,
CLIB_CACHE_LINE_BYTES 128
CLIB_CACHE_PREFETCH_BYTES 6
above CLIB_PREFETCH () macro will be expand to
ASSERT ((size) <= 4 * CLIB_CACHE_PREFETCH_BYTES);
it will hit assert due to size (i.e. 3 * 128) > 4 * 64
Solution:
Change to CLIB_PREFETCH (cop[1], sizeof(*cop[1]), STORE);
Type: fix
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Reviewed-by: Lijian Zhang <lijian.zhang@arm.com>
Change-Id: Id0981fd5bd2b25ff71db4197b25578d0b7a9803e
|
|
Type: feature
Thought this might be useful when using
many VRF to get the list of allocated
VRFs and corresponding names
Change-Id: If9d2c6612d4215e7576315d66d1eb130fcecfa13
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
allow verbose dpdk build to be enabled. Useful for tools, like debian
blhc, that want to inspect build logs.
The '--verbose' option to 'meson compile' requires at least version
0.55.
Type: make
Change-Id: I54e91298f632e2b91247680d9295701b05353abe
Signed-off-by: Nick Brown <nickbroon@gmail.com>
|
|
Type: fix
When the local MAC address of an interface changes the rewrite strings
of all adjacency types need to be updated - this patch fixes the missing
case of incomplete adjacencies.
I moved the update of all adj types into the adj module, since if the
complete adjs were done by the ip-neighbour module and incomplete ones
by adj module, that would mean two walks of the adj DB, as it is not
possible to walk only a specific type.
UT is updated to include the missing case.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Signed-off-by: Ivan Shvedunov <ivan4th@gmail.com>
Change-Id: I36af94976c645bdd0d4d3bc0093b24d7d077e9d7
|
|
1. Filter event ACCEPTED for lt (same as event RX)
2. Do lt check before vppcom_epoll_wait_xxx to avoid
delivering duplicated events.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: Ib41c880ceb5072d49e11ab42e31e54398703c0b5
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I837820fd1759cab55f42c54950e991a215234737
|
|
vlib_buffer_enqueue_to_next() requires to allow overflow of up to 63
elements of 'buffer' and 'nexts' array.
- add helper to compute the minimum size
- fix occurences in session and async crypto
Type: fix
Change-Id: If8d7eebc5bf9beba71ba194aec0f79b8eb6d5843
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This reverts commit f059a3452c285ec57a75c7b1ede5052244be4e5d, which broke the build.
https://s3-logs.fd.io/logs/production/vex-yul-rot-jenkins-1/vpp-merge-master-debian10-x86_64/1344/console.log.gz
Change-Id: I16fece8128fa9973495c587d105a8db57738e8f2
Type: fix
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie7b04b11987caadde0942483f171a318ce852228
|
|
Type: improvement
Currently, NAT44-ED users sessions details are returned for both active
and timed out NAT sessions. It may confuse users that expect to see only
active sessions in the response and make them think that timeouts for
NAT sessions do not work.
With this change, introduce an indicator of timing out for NAT sessions
returned in NAT44-ED user session details.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Change-Id: Ib81ed90369d4b495117538f521e5112e289cf7e6
|
|
This reverts commit 034bd1067eddb700c6d2bc67974056fe00012310.
Type: refactor
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Icce6052d6cf9616f7eac3185b4c9aace234aa59f
|
|
vlib_unix_recursive_mkdir () expects a NULL-terminated C-string.
Type: fix
Change-Id: I412b48443d0792307d611c466747c0aa5e423417
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I9a3923ec1ff1371e870bc57ade4035de07bfbbcb
|
|
lip->lip_host_name is a non-NULL terminated vector.
Type: fix
Change-Id: Ic154ad7f57f0b507204e55f78995cc0e89132e57
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Linux Control Plane interface creation logic is currently only able to
create untagged interfaces, and dot1q VLAN sub-interfaces. This change
makes it possible to create dot1ad VLAN sub-ints, and Q-in-AD as well
as Q-in-Q sub-interfaces as well.
It makes the plugin a bit more robust by catching a few common errors,
such as creating an lcp on a sub-interface without its parent having
one, and creating an lcp on a sub-interface that is not exact-match.
This change has a bunch of smaller improvemnets as well. I documented
my work in this post:
https://ipng.ch/s/articles/2021/08/12/vpp-1.html
It shows that after the change is merged, all VPP interface types now
create and operate cleanly as LCP interfaces as well.
Type: improvement
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I322669f7316d44c227090b83d6a574fb9c00e76a
|
|
Type: fix
Signed-off-by: Pim van Pelt <pim@ipng.nl>
Change-Id: I390282ecc63600728cf11413510c0169178e305c
|
|
Type: fix
Advertisements are dropped by anti spoofing check in some situations.
When a VR has "accept mode" enabled, we must add the virtual IP addresses
to the interface when the VR transitions to master state. When this
happens, fib_sas4_get() starts selecting the newly added virtual IP
address as the source address for packets sent on the interface, so
advertisements are sent with that source address.
When the virtual IP address is being used as a NAT pool address on a peer
in the backup state, the peer sees the address as a local address and
drops incoming advertisements with that source address.
RFC 5798 section 5.1.1.1 says advertisements should use the primary
IPv4 address of the interface they are being sent on as the source
IP address. Since the virtual IP address is only temporarily added
while the VR is in the master state, the virtual IP address should
probably not be considered the primary address of the interface. The
definition of Primary IP Address in section 1.6 says that selecting
the first address is a valid selection algorithm. Do that instead of
calling fib_sas4_get().
Change-Id: Id92f0e3237c7fd491dd8d695bb27307d494f8573
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
add CLI "set interface name <current-int-name> <new-int-name>
and the corresponding binary API to allow custom interface name
setting for any interface.
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I2b39da59879fd4526bcb5aa5854b6bd21e72ea73
|
|
This patch sorts 'show perfmon bundle' output in alphabetical order.
Type: improvement
Signed-off-by: Zachary Leaf <zachary.leaf@arm.com>
Change-Id: I26b379b5d6766b9f87f9a3a5013ea92b207fb5d4
|
|
Change-Id: I5bb1ab3a57097bf03e7de5541cc8496655bc728f
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
Fixes: 5b22339973feaa3eba48ead1e9fb428b1816c0cc
|
|
Added memory bandwidth boundedness bundle, closely related to cache-hierarchy.
This bundle works on ICX only, due to an ICX specific counter.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Id385bd5f4e645ac020774e311c623afb64b79b1e
|
|
Adding support for Linux papi TMAM on Intel Snowridge. Adds the ability to
indicate that a bundle should be thread or node bundle type based on available
cpu features (rdpmc support).
Type: feature
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: Ib871b2644fdb2410fbb580e0d21c3a8e2be13aba
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I4f7b3d5354a7658d7271c28444f2f4641f05b28b
|
|
Type: fix
Change-Id: Ie7920c0c699904de0f68ddb749725887b569f295
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Coverity does not seem happy about exotic control
flows in switch/case statements
Change-Id: Ie006190058f811aacf85125ebc58330d9c53510f
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
Fixes: 0b42ac565b970c186a9ad734f980b440f56fb25b
|
|
This change restores the af_packet tx path prior
in use prior to Change
Idf0bdd88990254a614962c2f7bc3e0292ccfd61a but
fixes the stalling issue by ensuring that the next
tx frame pointer is only incremented when a new tx
frame is used. This change also enables the
af_packet PACKET_QDISC_BYPASS option, for better
performance.
Change-Id: I65dde648ed66d21654847a900ceda5a8980ae6ec
Type: improvement
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
|
|
Change-Id: Ifa09dcdfd567ac3c2afab4bd3bd468260f766e1d
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: improvement
|
|
When an input supports adaptive mode and enters
in polling, some rx queues may be missing from
the node's rx_poll_vector. To solve the issue,
a full poll vector is being computed in
vnet_hw_if_update_runtime_data, and returned
by vnet_hw_if_get_rxq_poll_vector when the
node is polling in adaptive mode.
Type: fix
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I249bcb20ae0dd28afb0a5ca32993092bafd2f6b1
|
|
Type: docs
Signed-off-by: Ahmed Abdelsalam <ahabdels@cisco.com>
Change-Id: I0cbc1b21f156425e067e9ce90769a62983ca5d01
|
|
Fixed FIB entry per interface, pool and
static mapping registrations in NAT control plane.
Improved FIB configuration handling in NAT -
added functions to generalize handling of FIB & NAT,
cleaned up interface callback functions. Changed "is_"
macros to inline functions for easier debugging.
Type: improvement
Change-Id: I68a17761a975dd819139ae94e52a8a85d3f27ffc
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
The app may send packet to different remote via sendto() with
same socket (without calling connect()). In such scenario, remote
address need to be filled in.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I49deb308668c05442f237e97acc9bfa239782482
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I75f935cda00c335d0aefe02bff6fa8505dd931a8
|
|
Print header for each table.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I54ca04d6000a98afb4ad3d2f24caae3349548f23
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I427af3be604783d36080c284ed32fb1df525bf54
|
|
When the interface status changes, the api of vnet_hw_interface_set_flags_helper calls the event processing function (vlib_process_signal_event_helper) for event processing. When the opinter data_vec is NULL, the _ven_len operation of an illegal address will cause vpp crash.
Type:fix
Signed-off-by: fangtong <fangtong2007@163.com>
Change-Id: I7106b2aed7a1fc17f74bf6cb513912af97584f45
|
|
When an RX thread handles more than one RX queue and has a mix of
queues in interrupt mode and polling mode, the RX input routine is
naturally in polling mode. In that case, there is no need to set RX
interrupt pending when descriptor is available in the queue for
interrupt mode.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Iedbe57941eca3152c0e8ab9096cc81f315e0a915
|
|
Dereferencing null pointer fix.
Add checking of return values for all calls in print_template()
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I00073b29ab2e76d5d06af9bd3f5ae2846de4d46d
|
|
The VPP Stats Python binding was missing checking epoch.
Resulting it would not pick up changes in the directory.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I3226d71c77be2e80e24b5cd48fc9820833f7d30e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
fix to pass right arguments to vlib_buffer_enqueue_to_thread
Type: fix
Signed-off-by: Sivaprasad Tummala <Sivaprasad.Tummala@intel.com>
Change-Id: I2521ac8d33135843263e8f99318988ec78effbaa
|