Age | Commit message (Collapse) | Author | Files | Lines |
|
If a PMD writes too many log messages using rte_vlog(), the
pipe for logging can fill and then rte_vlog() will block
on fflush() while it waits for something to read from the other
side of the pipe. That will never happen since the process node
that would read the other side of the pipe runs in the
same thread.
Set the write fd to non-blocking before the call to
rte_openlog_stream(). If the pipe is full, calls to write() or
fflush() will fail but execution will continue.
Change-Id: I0e5d710629633acda5617ff29897d6582c255d57
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Recognize the PF and VF device IDs for the Mellanox adapter
used on Azure.
Change-Id: Ic7b36b37ac93db2b696354ffe6fa2b6d62ee3801
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
This slowed down the decoder. Improved from 16s to 13s for 1000 dump/details
messages.
Change-Id: Iae78136b020cdd9344f3b2170ce426d0f074b6e6
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I7513c41307e62068ab5d9739cac393675c6066f8
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I2abb3ceebae3a32cee9aa2a999bd47c37719d3ac
Signed-off-by: Eyal Bari <ebari@cisco.com>
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
This patch addresses the coverity scan warnings reported for the DPDK
plugin.
Change-Id: Ie7ac7ffcf4a6c63245eae0f9910a193ab1e318a8
Signed-off-by: Marco Varlese <marco.varlese@suse.de>
|
|
Change-Id: Id45957163c2b95a2300a8ac9104fc92b9cc928ed
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7e53b563fb801dd8508af47452ad44d4837cb68d
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
|
|
Configure w/ --enable-dlmalloc, see .../build-data/platforms/vpp.mk
src/vppinfra/dlmalloc.[ch] are slightly modified versions of the
well-known Doug Lea malloc. Main advantage: dlmalloc mspaces have no
inherent size limit.
Change-Id: I19b3f43f3c65bcfb82c1a265a97922d01912446e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
- negative test with wrong XID in OFFER not implemented as issue
reported in Jira ticket VPP-99 still not fixed
Jira: CSIT-1147
Change-Id: I4ebc622bd81fed421919bc0397a12e32cb26fa1d
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I487ccf2adabfbd22dac9f492ecff679d38046724
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I23be9c29227e7dd1bb11b5b7fa910bb61c2be6c9
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
(cherry picked from commit b4b2488202ff4282cc4a7bd779cc33934286c5cd)
|
|
The length in the GTPU header does not specify the length of the
payload. It does specify the number of bytes following the fixed
part (the first 8 bytes) of the GTPU header (see 3GPP TS 29.060,
Sect. 9.3.1).
Change-Id: I8ce73df015e1cf1f38d306666962c0058756111c
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
The fourth GTP-U packet had a wrong reference, leading to data
corruption.
Change-Id: Id82f87368183d5e8b7047133c5ea799f2a9cb43c
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
|
|
Change-Id: Ic636297df4c03303fdcb176669f0268d80e22123
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If6970788396c85415634f12304f49eed0d812281
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
How many engineers does it take to change a lightbulb?
Change-Id: I28a34e0ae49ce4f95b12a342c4664198a20f4574
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ia563b279e85b5da93f79db5a2a4d9b8c04f5be99
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I242056bc46ddb671064665916b2687860292dcb2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I3c58367eec2243fe19b75be78a175c5261863e9e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ibbba75d069ca1bbf9e5a1b8bd2f405d32021c656
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I5c381dfe2f926f94a34ee8ed8f1b9ec6038d5fe2
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I13279a1a96df457209fb25748a643c01b18ff4e0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Fix the copypaste-triggered errors in load-from-file ACL test code.
Also, add an explicit exit(1) after clib_error() to convince coverity
that code path is terminal indeed.
Change-Id: I1deedb49144559c9183449005ada0433c24db18a
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I8688f700fccd87484da3e202ca3a070cc14eb267
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I003e41786c549c6451a1e9e178f5871d32c20e6e
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
Remove broken special case from l2_input.c:set_int_l2_mode(), which
turns out to confuse the graph dispatch engine.
The loopback TX function needs to push packets to either
ethernet-input or to l2-input, based on bridge / BVI
configuration. Rather than overloading a single graph arc - and making
vain attempts to reconfigure it - create both arcs and use the correct
one.
Rewrote the loopback tx function as an idosyncratic multi-arch
quad/single loop fn.
Change-Id: I15b56ce641d90a11e7b3c7d23859f40e168dd7b2
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
For L2 ARP termination, use both brodcast ARP request and reply
packets to provide MAC/IP binding events.
For IP4/IP6 neighbor adress resolution, send resolution events
if there is an address resolution attemp with a static neighbor
entry where both IP and MAC matches. This allow probe of an IP
neighbor with a static entry to confirm it is responding with
a reply matching that of the static entry.
Change-Id: Iffb923bb5aea3f9021436735d5ca06e7b24f966f
Signed-off-by: John Lo <loj@cisco.com>
|
|
The driver implements Cavium QLogic FastLinQ QL4xxxx 10G/25G/40G/50G/100G
Intelligent Ethernet Adapters (IEA) and Converged Network Adapters (CNA)
(doc/guides/nics/qede.rst)
Change-Id: If17e8cb572eb8c0585085be1c7cfdfa159eb6e68
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I72978c5957cb1acf154c9de7ad153092bac37785
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: I597a88d255c2f7cff552b1fa12ed4a7c4579b91c
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: I1f82c40f9f927296d5d439b0db70a70ef803cf3c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add "show version cmdline" to display the command line
Add doxygen tags to the source code
Change-Id: I0205b373062fd88f176d9c8086d89d7784a5172f
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Remove useless unsigned comparisions: "(unsigned) value < 0", correct
a couple of incorrect limit checks.
Change-Id: I9606c4057df157f770d59535457cb9df1cfd1f35
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I28d05a04abd11f630035d34ce573016c77ffab53
Signed-off-by: shenJibiao <shenjibiao@corp.netease.com>
|
|
continue statement in case bypasses cleaning up of unserialized
node
Change-Id: I0103d31df2eed3ed04d7cdcdfb790f4d9a376336
Signed-off-by: Dave Cornejo <dcornejo@netgate.com>
|
|
When creating a new - as opposed to recycled - debug CLI process node,
perform a proper barrier sync and node runtime update. Otherwise, the
graph replicas diverge for some period of time. That's not immediately
fatal, but it's not a good idea, either.
When renaming a debug cli process node, fix all of the name-vector
replicas before freeing the [one-and-only] name vector.
This fixes the so-called stats segment node runtime scraper crash,
which tripped over a replicated dangling reference to the
recently-freed debug CLI node name.
Change-Id: Ieffabd9f003139e534b9d79b88370439907930e5
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Causes clang validation failures. The patch did not actually pass validation; unfortunately it received a +1 from fd.io JJB - presumably due to a race condition
This reverts commit 779c865cc6c7af5bb435d8b3465d80685370edb2.
Change-Id: Ica3697f8f90e67d3eae4debc597f27d7d512004a
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I51c4bcbd456d2e7ffbdeef9cc8c7703d1c88b52e
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
thanks to coverity... validate that the length of the packet on
wire matches the size of the header based on the number of groups
and sources. drop those that don't match.
Change-Id: Iab3f3a835f6a43d9c73c5d502ea5ceccdd6985b0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Node serialization is turned off by default. To enable it do:
statseg {serialize-nodes on}
Change-Id: I53bba3cab517bd3ba90eba52d94b3ebb16870141
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie7a64318f10ebb535c98aff4e25cdfc48f60ff33
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
VPP-1340
Change-Id: Ia3f2fc054dbfb2ba912a768c70466e7042024e32
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This adds the directory sphinx and sphinx/docs
as well as two matching placeholder files. These
are being added now to facilitate some gerrit triggers
Change-Id: I0e6e7607c5ae5cdbf05718b95b1d299178544485
Signed-off-by: Ed Kern <ejk@cisco.com>
|
|
It is cheaper to get thread index from vlib_main_t if available...
Change-Id: I4582e160d06d9d7fccdc54271912f0635da79b50
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
no_flood count was not updated on removal
might couase a negative insertion index when adding new members
Change-Id: I2caf2c453dfef1a9f16fb8fa2e5af42b4e653a69
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ie7621a38a44e7c692e23e58c43d27d8d2aab43e6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I2cb4cf2167b6e958d2e57b461848a4a189e3fda0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I57f1db6fabfdb8ddfba514ad754707b24d47c962
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Change-Id: Ib2cb345d07665735697bf54ad48d353ba4112eda
Signed-off-by: Francois Clad <fclad@cisco.com>
|