summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26perfmon: properly unmap mmapped pagesKlement Sekera1-1/+1
Add missing array index so that actual mmapped pages are unmpapped instead of attempting to unmap array holding those pages. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ib8709cce1bcbfb505307c140266834b284af796c
2021-10-25tcp: fix: TCP timewait port reuse rfc complianceMichal Kalderon2-4/+84
This patch provides a fix for early-kill of timewait sockets that is based on rfc's 1122, 6191. The following commits provided a solution for port re-use. However, they are not fully compliant with rfc 1122 4.2.2.13 ( Closing a connection ) and rfc 6191 (Reducing the TIME-WAIT State Using TCP Timestamps) commit b092b77cf238ba ("tcp: Enable TCP timewait port use") introduced a significant improvement by enabling TCP timewait port re-use. commit ee1cb469b2dd ("tcp: fix port reuse with multiple listeners") fixed usage of the wrong value for connection_index when searching for a listener, by storing the state in tcp.flags. Implementation details: When a SYN is received during time-wait state, the code checks whether all the requirements for accepting the SYN packet are met. If they aren't, the SYN can't be accepted and the packet is dropped, otherwise, connection is deleted and a new connection with same port is opened. Type: fix Signed-off-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Yuval Caduri <cyuval@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Change-Id: I38a33c6e321c760d45ebec9154399e1c90dd0250
2021-10-25bier: Disposition paths don't set the next-hopNeale Ranns1-14/+9
Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I3c4152219e5307ac0fe773e16d597f0e4b9a7d4c
2021-10-23arp: fix for source address selectionEd Warnicke1-1/+1
Type: fix Ticket: VPP-1970 Ticket: VPP-1992 Fixes: 9e17887db97bb9f6507270f9fa9923c10816e0df https://gerrit.fd.io/r/c/vpp/+/33495/7 introduced a bug where ND responses are inproperly dropped. This fixes that bug. Signed-off-by: Ed Warnicke <hagbard@gmail.com> Change-Id: Iec4b07646332ced292e2211408c4f7af3088ac28 Signed-off-by: Ed Warnicke <hagbard@gmail.com>
2021-10-22vcl: fix cfg parser handling of empty linesFlorin Coras1-0/+2
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ibef04947c3a2f4e700233157d581ed54558b51ed
2021-10-22session: fix minor issueFilip Tehlar1-1/+1
Type: fix Change-Id: I2f7579980f081d3b0a8d19baade0a6599d55cf80 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2021-10-22devices: add support for l3 af_packet interfaceMohsin Kazmi5-37/+106
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ia6b9d4ac55be2216887bfdb99be4021f6a96f166
2021-10-22ipsec: add api test fileFilip Tehlar2-0/+598
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ib3fe4f306f23541a01246b74ad0f1a7074fa03bb
2021-10-22fib: Don't back walk from a path-list when a child fist attaches.Neale Ranns2-12/+18
Type: fix If the walk is triggered when the child is added, then that child is visited in the walk. However, since it is just attahcing to the path-list it may not, or indeed cannot, have all the context it needs to successfully handle the walk. In the case of MPLS tunnel, it does not have the path extensions ready, and cannot since the path extensions need to resolve on the path-list. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I027af8cf2f522d2f6e37931bea60c767f0cb667d
2021-10-21fib: respect mfib entry flags on create with pathsPaul Atkins18-149/+125
When an mfib entry was created with both paths and entry_flags then the entry flags were being ignored. If there are no paths then the flags were passed into mfib_table_entry_update, but in the case where the entry didn't exist and there were paths and flags, the entry was created within mfib_table_entry_paths_update() which used a default of MFIB_ENTRY_FLAG_NONE. Pass the flags through into the mfib_table_entry_paths_update fn. All existing callers other than the create case will now pass in MFIB_ENTRY_FLAG_NONE. Type: fix Signed-off-by: Paul Atkins <patkins@graphiant.com> Change-Id: I256375ba2fa863a62a88474ce1ea6bf2accdd456
2021-10-21ip: Add ip46-local node for local swif[rx]Nathan Skrzypczak5-44/+132
Type: improvement This adds a new ip[46]-receive node, sibling of ip[46]-local. Its goal is to set vnet_buffer (b)->ip.rx_sw_if_index to the sw_if_index of the local interface. In dependant nodes further down the line (e.g. hoststack) we then set sw_if_idx[rx] to this value. So that we know which local interface did receive the packet. The TCP issue this fixes is that : On accepts, we were setting tc->sw_if_index to the source sw_if_index. We should use the dest sw_if_index, so that packets coming back on this connection have the right source sw_if_index. And also setting it in the tx-ed packet. Change-Id: I569ed673e15c21e71f365c3ad45439b05bd14a9f Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-21l2: add api test fileFilip Tehlar2-0/+1419
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ie79a2deac03c04c0697e482a649ff151142126ed
2021-10-21ip6: set local flag on outbound echo replyMatthew Smith1-0/+4
Type: fix When VPP generates an ICMP echo reply in response to an incoming echo request to a local address, set VNET_BUFFER_F_LOCALLY_ORIGINATED on the buffer. It will prevent ip6-rewrite from decrementing the hop limit. Outbound IPv4 echo replies also get this flag set. Change-Id: Iaa229294eb158edb58cf1bf1b7a90da281321406 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2021-10-21cnat: improve testsNathan Skrzypczak1-737/+562
Type: improvement This is an attempt to make the cnat tests more readable by hiding the scapy packet generation under a common context concept. This in order to add tests covering a wider range of scenarios. As of now, only VIP, snat & DHCP being covered Change-Id: Ia84868984506bbb652fe974e9a6f54f7a3cc0bd9 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-21session: add api test fileFilip Tehlar2-0/+364
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I6b89c4158d10d4928c8418312180dbeba7d70ab2
2021-10-20ip6: fix IPv6 address calculation error using "ip route add" CLIJieqiang Wang3-20/+61
Using VPP CLI "ip route add" to add static IPv6 entries outputs wrong results. Fix this error by correctly calculating IPv6 addresses with different increased ranges and grouping ip4/ip6 prefix calculation functionality into two functions. Type: fix Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com> Reviewed-by: Lijian Zhang <lijian.zhang@arm.com> Reviewed-by: Tianyu Li <tianyu.li@arm.com> Change-Id: If954876301ca2095f9331799a086f75db936f246
2021-10-20gso: add support for gso perf unittestMohsin Kazmi4-0/+393
Type: test Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I5d44a6ea24e4aa0842024a0961f1fb22c6e6419a
2021-10-20nat: enable skipped nat44-ed multi worker testsFilip Varga1-57/+0
Type: test Change-Id: I185725c0f94084d08c8514642a84a04da62398e1 Signed-off-by: Filip Varga <fivarga@cisco.com>
2021-10-20nat: nat44-ei configuration improvementsFilip Varga7-1043/+1575
nat44-ed core configuration improvements & fixes [0-5] adjusted for nat44-ei plugin. Improvements: * repeating code converted to functions * simplified functions used for pool address, static mapping and interface configuration. Clean up: * remove obsolete code and logic persisted after plugin separation from old SNAT plugin. Fixes: * [0] return correct API behavior changed in [5] Type: improvement [0] https://gerrit.fd.io/r/c/vpp/+/33622 [1] https://gerrit.fd.io/r/c/vpp/+/33431 [2] https://gerrit.fd.io/r/c/vpp/+/33337 [3] https://gerrit.fd.io/r/c/vpp/+/33249 [4] https://gerrit.fd.io/r/c/vpp/+/32796 [5] https://gerrit.fd.io/r/c/vpp/+/32951 Signed-off-by: Filip Varga <fivarga@cisco.com> Change-Id: Ie197faa576cb49acb3d218f14e00cb7d13ad9342
2021-10-20nat: NAT44-ED api fix and improvementFilip Varga4-16/+14
This patch fixes issue with NAT_API_IS_TWICE_NAT and NAT_API_IS_ADDR_ONLY flags. Because of control plane code change - move from boolean parameters to flags in https://gerrit.fd.io/r/c/vpp/+/32796 patch these api flags weren't correctly set. Type: fix Change-Id: Ieec5fe6bdcca314da027f2d23e3a24f174391a6f Signed-off-by: Filip Varga <fivarga@cisco.com>
2021-10-19bfd: fix bfd_key_id updateAlexander Skorichenko1-4/+8
Type: fix Currently, auth activation CLI command "bfd upd session auth activate ... conf-key-id <cki> bfd-key-id <bki>" allows to change both key-ids to new values at once. But if only bfd-key-id should be corrected, e.g. as a result of mistyping, we can't do that in a single operation, and have to deactivate auth first and then reactivate it with a correctly entered pair of ids. Currently, backend's bfd_auth_activate() function returns immediately, with no action, if it finds that submitted conf-key-id matches the current record. No check on bfd-key-id value is made. With this fix, bfd_auth_activate() checks if session's bfd-key-id has to be changed to a new value, and if so, it updates and logs appropriately. Change-Id: I3b915a936cb1721707860bb503f70e7dd29e0ddd Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
2021-10-19bfd: fix desired_min_tx_nsec updateAlexander Skorichenko1-0/+2
Type: fix Currently, the change in desired_min_tx value initiated locally doesn't result in actual update of the transmission interval. bfd_session_t structure has two fields for each of protocol's local time parameters desired_min_tx, required_min_rx In a case of a parameter update, "config_" prefixed fields store new values sent to remote bs.config_desired_min_tx_nsec, bs.config_required_min_rx_nsec Those prefixed "effective_", keep old values, still in charge, until new ones are being negotiated between peers: bs.effective_desired_min_tx_nsec, bs.effective_required_min_rx_nsec Currently, upon termination of the Poll Sequence (negotiation) only bfd_set_effective_required_min_rx() is called to update effective RX value. TX value remains unchanged. With this fix, add a call to bfd_set_effective_desired_min_tx() to set new, acknowledged TX value in effect. Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com> Change-Id: I80b6746533839c9572598f1ad9dabb33e621a525
2021-10-18api: remove legacy pd msg handlersKlement Sekera5-48/+0
While looking at a coverity warning it was discovered that it's caused by return value modified by pd msg handlers. As these are legacy, it's a good time to remove them and also fix the warning this way. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ic72ab8b2b7a2e55188d1c31cfd18a74b7cf82c43
2021-10-18interface: add api test fileFilip Tehlar21-164/+1484
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Ib07029204ecf12bf2adb5a39afa54bc98fb81f34
2021-10-16interface: fix offload flag checkNathan Skrzypczak1-1/+4
We should compute offloads in interface_ouput.c in the case when any of the UDP, TCP or IP offload flags is not present in the interface capabilities. e.g. if the interface supports IP cksum offload but not tcp/udp we should still compute cksums here. Type: fix Change-Id: Ibaa3a56dbc92938dca45311c38f079d040052194 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-16memif: Enhance show memif descriptors to display regionSteven Luong1-14/+13
memif descriptors table may have more than one shared memory region. To see whether a descriptor's memory address is valid or not, it is beneficial to also display the descriptor's region. While at it, fix the truncation problem for the offset field. Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ia3b7062ac0323c39ade6f3a58333c6405889148f
2021-10-16perfmon: topdown lvl 2 support on sapphire rapidsRay Kinsella3-11/+168
Added topdown level 2 support on sapphire rapids, including ability to indentify a sapphire rapids cpu. Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I9f99a92fa0886b98bb5185cff32bebd5a094f329
2021-10-16perfmon: additional perf counters on icelakeRay Kinsella2-1/+31
The Intel Icelake uArch supports measuring up to 12 counters, comprised of 4 fixed and 8 general counters. Type: improvement Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I68369ea55a0c95d6a4a280a464e69502bbf5474f
2021-10-15vcl: narrow the scope of the restriction of vlsh_bit_valwanghanlin1-3/+4
The restriction of vlsh_bit_val only effect select/pselect, so move the check to select/pselect function. Type: fix Signed-off-by: wanghanlin <wanghanlin@corp.netease.com> Change-Id: I3585c83cfc2f0a2fd834450be650dccda67e3faa
2021-10-14pppoe: fix coverity warningKlement Sekera1-6/+12
Initialise variable used in tracing code in case of early error so that tracing doesn't use this uninitialised variable. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I6b1cef07e1f126cee56e1116606869dd667274d2
2021-10-14nat: static mappings in flow hashKlement Sekera31-1485/+1324
Put static mappings in flow hash, drop existing hash tables used for static mappings. Drop refcount variables and use hash table as a single point of truth. Allow creating a static mapping conflicting with dynamic mapping, which will take precedence after dynamic mapping is freed, so that the existing flow can finish transferring data. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Idfde8efabc09971be38921d4b0ca5ccf4e9fe412
2021-10-14ip6-nd: fix coverity warningKlement Sekera1-0/+4
Add a missing return statement in case there are no parameters supplied to 'set ip6 nd proxy' CLI to avoid calling code with uninitialised parameters. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: Ie4fdb4df5d1af49471c421e5e7a6c2f885d2e8d2
2021-10-14tests: fix coverity warningsKlement Sekera1-6/+2
Fix coverity warnings by initialising variables and removing dead code. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I0254b81020cdc3d7075df003309065438526918f
2021-10-14misc: fix coverity warning in ila pluginKlement Sekera1-1/+1
Remove non-null check for a pointer which cannot be null to avoid dead code warning. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I5ff40a4f80db7bb0dff9928c90ff757b763902fd
2021-10-13docs: C & C++ apis examplesNathan Skrzypczak6-0/+346
Type: docs Change-Id: I5b6c388332bdd3a29777d728c3357816c8411ea2 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-13docs: better docs, mv doxygen to sphinxNathan Skrzypczak388-26305/+23361
This patch refactors the VPP sphinx docs in order to make it easier to consume for external readers as well as VPP developers. It also makes sphinx the single source of documentation, which simplifies maintenance and operation. Most important updates are: - reformat the existing documentation as rst - split RELEASE.md and move it into separate rst files - remove section 'events' - remove section 'archive' - remove section 'related projects' - remove section 'feature by release' - remove section 'Various links' - make (Configuration reference, CLI docs, developer docs) top level items in the list - move 'Use Cases' as part of 'About VPP' - move 'Troubleshooting' as part of 'Getting Started' - move test framework docs into 'Developer Documentation' - add a 'Contributing' section for gerrit, docs and other contributer related infos - deprecate doxygen and test-docs targets - redirect the "make doxygen" target to "make docs" Type: refactor Change-Id: I552a5645d5b7964d547f99b1336e2ac24e7c209f Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2021-10-13docs: convert plugins doc md->rstNathan Skrzypczak56-3184/+3706
Type: improvement Change-Id: I7e821cce1feae229e1be4baeed249b9cca658135 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-13nat: fix coverity warningKlement Sekera1-1/+1
Fix coverity warning by initialising proto variable to a dummy value. This value is never used because consuming function uses this parameter value only if is_addr_only flag is not set and this flag is always set if proto value is not provided by user. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I9b5e8c08346bea1e2b460bb09e962c4b8d3b6947
2021-10-13docs: convert vpp doc md->rstNathan Skrzypczak31-2272/+2848
Type: improvement Change-Id: If453321785b04f9c16e8cea36fb1910efaeb2c59 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-13docs: convert extras doc md->rstNathan Skrzypczak24-1659/+1922
Type: improvement Change-Id: Ie3b25a86b99098d2b3a21a11fc73234c8ed589d6 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-13libmemif: docs md->rstNathan Skrzypczak10-494/+652
Type: improvement Change-Id: Ibebd2d47a4268189f11601d004073e4858548f25 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2021-10-13libmemif: update documentationJakub Grajciar4-331/+157
Type: refactor Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I0094ea8627cd8bcd5ea119c2fd48f077c8e2e4bb
2021-10-13session: app name should format with %vXiaoming Jiang1-1/+1
Type: fix Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: I2c77066cc9f1d3063373cc9559cc5b369906cc24
2021-10-13nat: fix static mapping segvJoshua Roys1-1/+1
Adding a nat44 static mapping during startup on a DHCP interface leads to a segv via this path: - dhcp_client_acquire_address - ip4_add_del_interface_address - ip4_add_del_interface_address_internal - nat44_ed_add_del_interface_address_cb - nat44_ed_add_static_mapping - ip4_interface_first_address Type: fix Signed-off-by: Joshua Roys <roysjosh@gmail.com> Change-Id: I38dac8a096b052550f2b87b4e13a950d2cd868b0
2021-10-13dpdk: fix vmbus device name parsingBenoît Ganne3-5/+7
unformat_init_vector() expects a vector, not a NULL-terminated C-string. Type: fix Change-Id: I20a266243f63d94b0c6fe24e25ee8346c08c8ff2 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-10-13vapi: fix vapi test coverity warningFlorin Coras1-0/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I5ecb73009c6ebb00b5d9e14bd09b4b3e80ab5601
2021-10-13vppinfra: fix socket init netns coverityFlorin Coras1-0/+3
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4f37c6601ace08ae886b08d2284b413d457e4eae
2021-10-13vppinfra: fix format_table coverity warningFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ida114ba35227f70ddd87cad791a21f186be1cba8
2021-10-13vlib: fix vmbus error logBenoît Ganne1-3/+3
struct dirent *e is freed when calling closedir(). Use ifname instead. Type: fix Change-Id: Icc9ca52c33ecc1dee7a9e28802149e4e3e4c8ac0 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-10-13interface: handle error during admin-up correctlyMatthew Smith1-3/+0
Type: fix In vnet_sw_interface_set_flags_helper(), the variable old_flags is set to the original value of vnet_sw_interface_t.flags for an interface. If an error occurs during the process of bringing an interface up, old_flags is used to restore the original value. Before the dev class or hw class admin_up_down_function can be called, but after modifying vnet_sw_interface_t.flags to it's new value, old_flags is set to the value of vnet_sw_interface_t.flags a second time. This discards the original flags that were being preserved. As a result, if an interface is being brought up and the dev class or hw class function fails, at the end VPP believes that interface is up. This can cause a crash if packets are routed through the interface and some RX/TX initialization was not completed because of the error while bringing the interface up. Change-Id: Ica6b6bac13c24e88c4136bf084cd392e6217e7d9 Signed-off-by: Matthew Smith <mgsmith@netgate.com>