summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-06-01vagrant: disable automatic update on startThomas Monjalon1-0/+1
The box update requires an internet connection. It is better to disable it on vagrant start. It still can be updated with the manual command: vagrant box update Change-Id: I04e05ea08477bf36f25672c54d0a057d995d4a42 Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-05-31Fix build-root/scripts/version to not have spurious ~Ed Warnicke1-3/+2
Change-Id: Id28f134e3a4aa19c5756014d53004501db0d0c88 Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-05-31Fix u16 type handling in jvppMarek Gradzki3-4/+133
Change-Id: I6e5ed2562c65dde6c9f6f085c8b9d40f80684894 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2016-05-31VPP-102: vHost reconnect to previously used sockets on VPP restartJohn Lo1-0/+8
Change-Id: Ida11bddb52268e0e8513b7b379eeed6103bd48f1 Signed-off-by: John Lo <loj@cisco.com>
2016-05-31VPP97: Flooding of pkts with multiple buffers in BD with BVI crashes VPPJohn Lo2-9/+3
The loopback interface should use vnet_interface_output_no_flatten so follow-on buffers of a jumbo packet do not get put on the output frame and be sent back to ethernet-input or l2-input node. The replication_recycle_callback() function should not assume follow-on buffers of a jumbo packet are on the buffer free list. Change-Id: Ide646a6d9b43e82782c0581ea3022a9e70f82582 Signed-off-by: John Lo <loj@cisco.com>
2016-05-31Fix hash table bogus read in ip6 vxlan-gpeFlorin Coras2-13/+3
- consistent use of hash_*_mem methods. - tunnel setup copies the key from the wrong location - remove extraneous storage for keys copied from the vxlan node that is not applicable here Change-Id: I419fd30a52ba387104abe467c296de85233823d1 Signed-off-by: Florin Coras <fcoras@cisco.com> Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-31Add CLI/API for clearing all remote mappingsFilip Tehlar5-28/+90
Change-Id: I5aef12d3a9c8daefff52e5f958c504f5d2ff9fd0 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-31ONE-15: Fix duplicate locator, refactoring locatorAndrej Kozemcak3-246/+156
Check duplication locator and clean after locator when remove it. Refactoring locator_set code. Change-Id: Ib83cbcddc7a363a60fa5b6a366203d0dc0ea7ca6 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-31ONE-16: Locators are not properly cleanedFilip Tehlar1-2/+16
Change-Id: Ia6eaaa9a741e84cbd0ff957cfd9a7143a3d0a977 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-30Add Dump API for VxLAN-GPE tunnelHongjun Ni6-38/+202
Change-Id: I4913fe6c4b1280939147887896aea9b79a9f7f10 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-28VPP-84 af_packet retry on EAGAIN, count on errorsChris Luke2-9/+32
When af_packet signals the kernel that there are packets in the tx ring with sendto() the kernel sometimes responds with EAGAIN. Previously the af_packet driver would treat any error from sendto() as fatal. Whilst there's not much we can do about this, count the errors and let's try to not die on the spot or sit in a loop forever. Change-Id: Id76ba5e07b744f1ed6f348ec838a1ac506a381c9 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-28VPP-96 ENID driver update for rx of jumbo pkts using muliple mbuf'sJohn Lo4-2/+800
Change-Id: I0e985b079da3224f4886e3ee2cece4d046e291eb Signed-off-by: John Lo <loj@cisco.com>
2016-05-29Fix VxLAN-GPE add_del API issueHongjun Ni1-2/+2
Change-Id: I4210b3320d3fe841ba7ff1349b6a52affc047338 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-27VPP-95 VXLAN add_del API intermittent failureChris Luke2-3/+3
The VXLAN add_del API sometimes rejects calls with VNET_API_ERROR_SAME_SRC_DST when the two parameters are obviously different. This is because the API code is checking the "is_ip6" flag in a not-yet initialized area of memory leading to random results. Also fix help text for vxlan_add_del_tunnel in vat. This does not change the API; it repairs intermittent failure. Change-Id: I41863694f478c1f669078f82f69d8cca4841c989 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-27Fix dpdk march/mtune defaultsDamjan Marion1-1/+1
Change-Id: I6e6940c8467a331b37da153bb8a2154c1d165261 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-26Add show command for LISP map resolversFilip Tehlar1-0/+21
Change-Id: I3ed6269f9a307b50b56ce04defc2576a139c6add Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-25Move dpdk startup config data to separate structDamjan Marion8-138/+148
This is preparation work for moving DPDK EAL and mempool initialization to vlib. Change-Id: I2dc35aa53edec0e07fc2650d630aa625831154c3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-25ONE-14: Fix crash when re-enable LispAndrej Kozemcak1-4/+9
Change-Id: Ib95338d7055dea9036eddb7dff5ca7ccbcb35639 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-05-25Add Vxlan-Gpe over IPv6Hongjun Ni9-715/+1021
PatchSet4: consolidate code as per comments. PatchSet3: simplify the code using ip_udp_encap_one/two PatchSet2: consolidate comments and indent style Change-Id: Ia8b43f854a46d77e838e198566200ad28fd72472 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-24VPP-86: fix array copy in generated JNI codeMarek Gradzki4-22/+169
Change-Id: Ic67b3c0623d98c5ee3f1ffa1e1bd9cfb96b233bd Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2016-05-24Fix an issue in format_vxlan_gpe_tunnelHongjun Ni1-0/+4
Change-Id: Ib283c75505b787f715e34f5b325dda8a6c2fa125 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-05-23Native VPP driver for Intel Niantic family of NICsDamjan Marion11-0/+4560
Available only in vpp_lite platform Change-Id: I09d112af5f7f4521ec25196ecdd8c02c20eedd5f Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-23Move rte_delay_us_override so it overrides DPDKTodd Foggoa3-42/+47
The current location in the vnet dynamic library does not override the dpdk weak function as intented. Moving this function to the main app allows the linker to find the non-weak symbol and override it. Change-Id: I96c6dc5af2e511cc1f84bd66419c5a4ac96a9541 Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-05-23Create /plugins directory, move sample-pluginDave Barach9-0/+0
Change-Id: Ia58923c7c98dc04c027c8c5879a4dc5f5b144b8a Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-23VPP-81: Print interface name after creating an interface with CLIPierre Pfister17-22/+48
When the CLI is used to create an interface, and whend the operation succeeds, the newly created interface name is printed-out. The patch includes the following interfaces types: - AF_PACKET - Vhost User - Netmap - GRE - L2TP - MPLS-GRE - Loopback Change-Id: Id518c139ec63a261eae81d2ed95c4cd1f10b5157 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-05-23Add LISP RTR supportFilip Tehlar7-44/+392
Change-Id: I8a3770f8f1cd1fde6765b81d35aacaaf4ff98b82 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-05-23Changed JVPP interface for construction and connectivityTibor Sirovatka10-36/+77
Simplified construction, autoconnected; possible connect/close See updated sample test cases with changed interface usage Change-Id: Ib53e855880bc414868aa2b9bb8f5df086917e375 Signed-off-by: Tibor Sirovatka <tsirovat@cisco.com>
2016-05-21Add per-thread, per-node runtime stats serializationDave Barach8-64/+322
Change-Id: Ic4009cdbac67b7cd53c88079439496b9d9dfaa35 Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-20VPP-80: netmap binary API message element name collisionDave Barach3-8/+8
if_name collides w/ ietf-interfaces.yang member name, causing a build-break in an existing yang-model-based app. Rename to "netmap_if_name". Change-Id: Id386eacd77343dd15a868c28dacd2b0e4523bc9b Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-20VPP-79: fix cross-compilation build breakDave Barach1-3/+3
.../packages/dpdk.mk must not set $(TARGET). The Makefile fragment really only needed to use a temporary variable to control the dpdk Makefile. Simple fix: set $(DPDK_PLATFORM_TARGET) instead. Change-Id: Ieb61b603bc36ed708a1b1237dc6bc503e90a0b7b Signed-off-by: Dave Barach <dave@barachs.net>
2016-05-20VPP-77 Creating VXLAN over IPv6 via API failsChris Luke1-2/+2
Tunnel dst is incorrectly being set to the requested src address. Change-Id: I44e2ee475f0572e78d148951c5d4684e85e08ce7 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-20Add policer dump APIMatus Fabian3-0/+299
JIRA: VPP-67 Change-Id: I8fced60a884f1585b1f51002832d47631eea9571 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-19VPP-74 Fix signedness issue when terminal resizesChris Luke1-4/+9
When re-locating our current viewport into the pager buffer we need to verify that the new viewport is within the boundaries of the index. This condition is considered very rare, but nontheless the check is needed. Unfortunately I assumed the variable was signed; it is not, and the subtraction can in some cases cause the value to be negative. This is therefore a bonafide semantic error that may cause problems. This patch reworks the logic to avoid having to change it to be signed. Change-Id: I26f0747d38dcc43dd9c092d50f2489b122009e7b Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-19Remove unused PCI codeDamjan Marion1-7/+0
Change-Id: I1d91c9982823758059f9d6aa699982253930e7ba Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-19Add support for multiple microarchitectures in single binaryDamjan Marion72-34/+439
* compiler -march= parameter is changed from native to corei7 so code is always genereted with instructions which are available on the Nehalem microarchitecture (up to SSE4.2) * compiler -mtune= parameter is added so code is optimized for corei7-avx which equals to Sandy Bridge microarchitecture * set of macros is added which allows run-time detection of available cpu instructions (e.g. clib_cpu_supports_avx()) * set of macros is added which allows us to clone graph node funcitons where cloned function is optmized for different microarchitecture Those macros are using following attributes: __attribute__((flatten)) __attribute__((target("arch=core-avx2))) I.e. If applied to foo_node_fn() macro will generate cloned functions foo_node_fn_avx2() and foo_node_fn_avx512() (future) It will also generate function void * foo_node_fn_multiarch_select() which detects available instruction set and returns pointer to the best matching function clone. Change-Id: I2dce0ac92a5ede95fcb56f47f3d1f3c4c040bac0 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-18Add netmap APIMatus Fabian7-10/+208
JIRA: VPP-66 Change-Id: I421529fa8eafe5268745a34a4fcd40156defcdf8 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-18Rework of the old PCI codeDamjan Marion11-339/+476
* adds support for VPP native PCI drivers using standard uio_pci_generic kernel driver * adds generic PCI interrupt callback * splits code to generic PCI handling and linux specific * adds new debug cli 'show pci [all]' Change-Id: I447c2285e319e9725d70688c1b70c9dedda51fdc Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-17Set java artifact versions to 16.09 for masterEd Warnicke1-1/+1
The nature of Java artifact versioning is different that rpm/apt versioning in that artifacts are traditionally numbered: ${NEXT_RELEASE_NUMBER)-SNAPSHOT This patch sets ${NEXT_RELEASE_NUMBER) correctly for master. Change-Id: Iab34c26c7440d5e04d6d05f46598832e9adf6920 Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-05-17dpdk/Makefile - Allow dpdk target to be set according to the platformChristophe Fontaine3-4/+31
Allows DPDK parameters to be overriden from the platform definition. $(PLATFORM)_dpdk_arch = "armv7a" $(PLATFORM)_dpdk_target = "arm-armv7a-linuxapp-gcc" $(PLATFORM)_dpdk_make_extra_args = "CONFIG_RTE_EAL_IGB_UIO=y" Change-Id: I8c0f233942744cb82ca3ed2d65e33acee845cb4e Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-05-17dpdk/build - 32bits compilationChristophe Fontaine4-28/+28
In vnet/vnet/devices/dpdk/device.c, post 2 event data instead of merging them into 1 u64. Change-Id: I8b1d61b894279fb6eb57bb82a05affc14360e6b8 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-05-17dpdk/init - Add compatibility to non numa architectureChristophe Fontaine1-4/+25
On non numa aware platforms, the path "/sys/devices/system/node/node%u" does not exist: the "free_hugepages" count is available in "/sys/kernel/mm/". Change-Id: Id62018a2bd0937d267663699c620e89d02c26a72 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-05-17Fix output feature issue where opque field is already used by previous nodeDamjan Marion2-3/+8
Change-Id: I1470993668fa8c740229149bbb227bd1e410d5ab Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-17vppinfra - ARM: cycle count 64bits register is only available on ARMv8Christophe Fontaine1-2/+9
Change-Id: I7d622e591020a482af68667f4d1ed2056258d2c8 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-05-16VPP-23 Re-work pager line collationv16.09-rc0Chris Luke1-88/+364
To better handle lines longer than the terminal width, re-work how the pager collates lines. We still store each output line in a vector or lines; additionally we index the start and end of displayable lines. The index then becomes the data to work out what to display. If the terminal is resized this index is rebuilt and the current page redisplayed and an attempt made to keep the current top-of-screen line in place. Change-Id: Icc6f4f72dabad89682cd82be88adb03eadb7811d Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-05-16VPP-61 Patch2/2 Removing NSH from VPP for move to NSH_SFCKeith Burns (alagalah)10-1038/+5
Change-Id: I76359b621b2edc599cf2e9ee845d97293a5d46f7 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-16VPP-61 Patch1/2 - Remove NSH from VPPKeith Burns (alagalah)6-127/+0
- Had issues with original patch and CSIT, breaking into -- Makefile and API changes -- Follow up patch removing NSH directory Change-Id: I6c2f49a74d59b97ce4ea43799cc6f01f5cb1d5a2 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-05-16VPP-58: Fix build on AMD OpteronDamjan Marion1-1/+1
Change-Id: Ib3e10fd4c27dde4f90b8d156f0c8547787ad46e2 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-16Add build number to VPP version if BUILD_NUMBER var is setDamjan Marion1-2/+6
Change-Id: I73ecc12224fdfb08b7aa6118761b368577ce33d5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-05-16Add configure policer APIMatus Fabian6-47/+253
JIRA: VPP-67 Change-Id: I04560d78e2eb131cd6cc31472b70b3d3e8fdd79a Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-05-16VPP-68: L2 Rewrite: Support for chained classify tablesPierre Pfister1-0/+18
The classifying capabilities are pretty limited if only a single table can be used. This patch adds support for chained classify tables to L2 Rewrite feature. Change-Id: Ib678fe2028f17b441adb75d85bf3e31185e42c59 Signed-off-by: Pierre Pfister <ppfister@cisco.com>