Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I11ec0d7048d36c30a97d437e5b0abd05f06ab0eb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If74acb0168bed2201d2a8b47bf3f860540d1574b
Signed-off-by: Khers <s3m2e1.6star@gmail.com>
|
|
Patch for ixgbe which has been used with DPDK 18.02, 18.05.
If the link flaps before link status has been successfully
collected, the MAC will be reset and the PMD will not wait
long enough for it to come back up before giving up, which
will continue happening every time an attempt is made to
check the link status.
This patch was submitted to upstream DPDK in July 2018 but
it has not been included in a release yet.
Change-Id: Ib2100b33d2a986f3cf74e42fc5538412f76f42c7
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
This is the high version of extendto. This function accomplishes the
same task as both shuffling and extending done by SSE intrinsics.
This enables the NEON version for buffer indexes to buffer pointer
translation.
Change-Id: I52d7bbf3d76ba69c9acb0e518ff4bc6abf3bbbd4
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Yi He <yi.he@arm.com>
Verified-by: Lijian Zhang <lijian.zhang@arm.com>
|
|
create interface memif [id <id>] [socket-id <socket-id>] ...
Can optionally take a socket-id.
You create a socket-id with:
create memif socket [id <id>] [filename <path>]
Unfortunately, this doesn't work because "create memif" was
deprecated. It results in:
vpp# create memif socket id 0 filename /run/vpp/test.socket
command deprecated. Please use 'create interface memif' instead.
This fixes it by clipping out the
create memif
command entirely.
Change-Id: If503758706bf758b6cb46e958200527a5856c600
Signed-off-by: Ed Warnicke <hagbard@gmail.com>
|
|
Change-Id: I4bd9c9f73499711e04b38d53daa5c917a4285bf5
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic1c51818b8aa8dbd164e70bb3b7471868e5af6f6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch makes 32/64 bit interoperable shared memory bihash tables
work regardless of where they're mapped.
Change-Id: If5b4a37ccdaa75410eba755c7d7195633de1b30b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
when the name of the structure crosses a line boundary it's painful to parse...
Change-Id: I5d0606900802fb8d64a065f31f3e2a53bd8a5f40
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
the header is written (STORE) the data is only read (LOAD)
Change-Id: Ia3ac0c81224a0db736c329ed3e2e55b7417f08a0
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- common types on the API
- endpoints keyed in various ways for DP lookup
- conparison functions for VPP IP address types
Change-Id: If7ec0bbc5cea71fd0983fe78987d147ec1bd7ec8
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I9636a4e631cacf22d3189e292888c34f615298b0
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
- NSH plugin overrode vat_api_hookup()
- Missing format function in mactime.
Change-Id: I2dcbc2522d8f525d223c2ee3bb667111d1b3b78e
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
On CentOS 7, having libvlibmemoryclient link libvlib causes
a SEGV when a program or library is run which links against
libvlibmemoryclient and dlopen() is called. This is because
dlopen() executes any functions with __attribute((constructor))
set. The VLIB_CLI_COMMAND macro creates CLI registration
functions that have this attribute set. So CLI registration
functions end up being run by applications which are clients
of the VPP API.
This doesn't occur on ubuntu 16.04, because ld seems to
omit shared libraries that were listed on the command line
if they are not used to resolve any symbols.
Removing the link to libvlib on vlibmemoryclient to fix this
problem results in another problem. Tests of libvcl_preload
fail when running 'make test'. This happens because
libvcl_preload calls dlopen but does not link against libdl.
When libvlibmemoryclient had libvlib linked, these errors
did not occur since libvlib links libdl. Adjusted the build
of libvcl_preload to explicitly link libdl.
Change-Id: I271ba2f9226ce1602e1f6c1525f3b093bb0345ed
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
which can create dead loop in
nat_alloc_addr_and_port_default function
Change-Id: I468c25ce0f0a0b3f881de564623dea208b2ca700
Signed-off-by: dongjuan <dong.juan1@zte.com.cn>
|
|
Using rev16 vector intrinsic to reverse byteorder in each word
independently.
Change-Id: I071c40780baffe0bda614ec5d9dd92858f574b0d
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Brian Brooks <brian.brooks@arm.com>
Reviewed-by: Yi He <yi.he@arm.com>
Verified-by: Lijian Zhang <lijian.zhang@arm.com>
|
|
This is used in vlib_get_buffers_with_offset.
Change-Id: If4ff776bc97d21a22e870300b164eeb6a5ec3638
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Brian Brooks <brian.brooks@arm.com>
Reviewed-by: Yi He <yi.he@arm.com>
Verified-by: Lijian Zhang <lijian.zhang@arm.com>
|
|
Having the NEON equivalent of u32x4_hadd for CLIB_HAVE_VEC128
Change-Id: I210f96f7ecb9b80b4753311a68e5e09ccda7e95b
Signed-off-by: Sirshak Das <sirshak.das@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Brian Brooks <brian.brooks@arm.com>
Reviewed-by: Yi He <yi.he@arm.com>
Verified-by: Lijian Zhang <lijian.zhang@arm.com>
|
|
Change-Id: I3af3916b68189c2174020e5ecc29a7bc45b25efa
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Ie68814c8afc6cd67eb75da0b95dffa7b404cb7ba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
supporting TCP/UDP
The DPDK plugin sets all of the offload flags, which may cause an initialization failure
on the NICs that do not support SCTP offload. The VPP code does not deal with the SCTP
offload at the moment at all, so after discussing with Damjan, we agreed
the best approach to fix the issue is to not request the SCTP offload.
The output of "show hardware" for the NIC in question before this patch:
Name Idx Link Hardware
GigabitEthernet1/0/0 1 down GigabitEthernet1/0/0
Ethernet address 00:e0:67:09:90:4b
Intel 82540EM (e1000)
carrier down
flags: pmd pmd-init-fail maybe-multiseg tx-offload intel-phdr-cksum
rx queues 1, rx desc 1024, tx queues 1, tx desc 1024
cpu socket 0
Errors:
rte_eth_dev_configure[port:0, errno:-22]: Unknown error -22
And the excerpt from "show log":
1970/ 1/ 1 00:00:00:739 notice dpdk Ethdev port_id=0 requested Tx offloads 0x1c doesn't match Tx offloads capabilities 0xf in rte_eth_dev_configure()
Change-Id: I159d65c02fc3f044441972205f1f0ac08e52050c
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: If1c27359cd93f6de6da9a93c3573997a51201959
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I1aa196756b3ff4969b8ff2f117778d2cd87d6dd5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch implements vxlan with extension of group based
policy support.
Change-Id: I70405bf7332c02867286da8958d9652837edd3c2
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I1ccd9bd2861d5d8e57b1bd7f9e2439147f603a58
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Also fixes vcl client/server stats and closing procedure.
Change-Id: I7d5a274ea0a3c8ea13062bf61bf402248dfe1a19
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Under rare scenario, epoll may still post an event to VPP although the file
descriptor is already deleted via epoll_ctl (EPOLL_CTL_DEL) and the file
descriptor is close. VPP tries to access the free file index entry and crash.
The fix is to throw away the events which the file descriptor is already deleted.
Change-Id: Ieca3a1873aecb28630c3abc42c40341f27c2faa7
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit aec7297ba012e1fe4bbf85cdaec8e810aa476cea)
|
|
Change-Id: I352dbb8e972e59a4caae4acd507153446470ce6b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
also some moving of l2 headers to reduce dependencies
Change-Id: I7a700a411a91451ef13fd65f9c90de2432b793bb
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Otherwise the key destructor is not called on pthread_exit.
Change-Id: I11e6b9683a926eecd3f40a44aab41924ff9c3101
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ibc74e7f7587f8b17fc0dcec20cc4530b9dd4c3ca
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I770607cb213d538a29d7bd5762682981b01e9d18
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I72d400401a308012b43513179870823f6f921e44
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The old expression was '*.so.*.*.*' to find shared library
files with 3 components in the version.
Building from master gives you files with 2 components in
the version (e.g. libvnet.so.18.10). So most libs were not
getting included in vpp-lib.
Change-Id: Ib89d2f5aeb2417eed1b6b851089b9d22f540a226
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
clib_time_verify_frequency(...) rejects clock frequency changes
greater than 1%.
vlib_worker_thread_barrier_sync_int (...) continuously checks that the
barrier hold-down timer is not unreasonably far in the future.
Change-Id: I00ecb4c20e44de5d6a9c1499fa933e3dd834d11a
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
Change-Id: I033a1f5cdb24f77462cb5ec90a62226d93f52925
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
According to Nitin Saxena ThunderX2 machine has 64B cache line whilst
all others are 128B. According to Damjan, Nitin's previous patch broke
compilation for all non-Cavium machines. This patch should make
everything happy again.
Change-Id: I8c5c2661f9f2f9c3e9b0965a277712f9a1eefa5f
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
This caused a spurious message to be sent on the API ring causing debug messages.
Change-Id: Ief4ca655ae048aad386a88fed11e8c1114378dc7
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ic31da442a0e0477569d53b4a72627bbb25e93365
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9cec7486cb6e3c5261d74d2b15a4d19469285a30
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic952ed5b837ac8409fd95e2b5cb92eb028ba0c40
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I87b8f054bbb54895429578dfe565e72331beb5b2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ifcc2717efd242ae2016563d6f3e5cd57fe161e00
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I7fcfddc2bc7d9a64f8aa0d57ba5d11d325a15ce1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
This patch depends on https://gerrit.fd.io/r/#/c/13260
Change-Id: If94968342935ebd24cf4ebed238e6a27d94959b7
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
It is not good enough to initialize sw_if_index0 = 0,
sw_if_index1 = 0, as it maybe causes the first two
incoming packets to miss necessary computation.
Change-Id: Ifcab408d9514820e0daa280f4c73956db13b59be
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
|
|
Change-Id: I5a9ae39ed0429b3de001b5109268d577a281cd46
Signed-off-by: Scott Keeler <skeeler@cisco.com>
|
|
in case first connecting slave fails continue connecting others
add disconnect string to memif details
Change-Id: I9d83db4724de1cab60786dca566e004016cf1e59
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: I7b7183b4603076e5afac096545d820091ee7c495
Signed-off-by: Nitin Saxena <nitin.saxena@cavium.com>
|
|
- We deliberately ignore the return value.
Change-Id: If467911b019e7336cf9dc6d4c95c2cd53a5af33f
Signed-off-by: Chris Luke <chrisy@flirble.org>
|