summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-07-13misc: remove vnet_all_api_h and vnet_msg_enumFilip Tehlar11-135/+3
These file are no longer needed Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I34f8e0b7e17d9e8c06dcd6c5ffe51aa273cdec07
2021-07-13fib: Set the GLEAN flag on attached export routes so that the SAS worksNeale Ranns6-39/+77
correctly. Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I4bc2eb394a8f9d01c5a12de2ce963c22209d5439
2021-07-13tcp session: next node config on connectsFlorin Coras2-3/+9
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ief06b1509d31b55efc8d1436b6ff9e01c6037a32
2021-07-13mss_clamp: coverity test fixMiklos Tirpak1-3/+6
Silence the coverity test with setting the interface index in a variable before the boundary check. Type: fix Change-Id: I9bd6db08bfef93142581dada0b6a7d78b7de91e7 Signed-off-by: Miklos Tirpak <miklos.tirpak@gmail.com>
2021-07-13misc: fix init order to avoid startup warningsBin Zhou (bzhou2)4-27/+14
Put plugin init order inside plugin instead of in vnet Type: improvement Signed-off-by: Bin Zhou (bzhou2) <bzhou2@cisco.com> Change-Id: Icbacdb3f1cb4ac9d74e3f78458e8bc333793b4d6
2021-07-13dpdk: add base-virtaddr config optionRobert Shearman1-1/+4
Type: improvement Allow the use of the base-virtaddr config option to be passed through to DPDK. This is useful to allow use of devices with an IOMMU in nested VMs without resorting to PA IOVA mode. Signed-off-by: Robert Shearman <robertshearman@gmail.com> Change-Id: I32b6513377e6d20bf155e12c45f902d51ea982c4
2021-07-13vppinfra: fix SIGSEGV in clib_mem_vm_unmapchenqijun1-4/+6
while one mprotect PROT_NONE on hdr->next or hdr->prev, the other one with the PROT_NONE is unmap at the same time, cause SIGSEGV. Type: fix Signed-off-by: arikachen <eaglesora@gmail.com> Change-Id: I21c0497da140c9654b566e47f767a90346715ed8
2021-07-12papi: remove shared memory transportOle Troan8-159/+7
This patch removes the papi transport shared memory plugin. It also removes any dependency on CFFI. Type: feature Signed-off-by: Ole Troan <ot@cisco.com> Change-Id: Ia81701c0dc506871e511495d837e41420e1fdf72 Signed-off-by: Ole Troan <ot@cisco.com>
2021-07-12session: api cleanupFilip Tehlar9-441/+117
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Iacc58d27ac51c8a1c571087f98297e046b3477c2
2021-07-09gso: add ipsec tunnel testsMohsin Kazmi1-0/+247
Type: test Change-Id: I831bc8c21f8ce869054eafcb14542508039c1b82 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2021-07-08session: allow listen in any fib if default namespaceFlorin Coras3-3/+12
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If0712f01bdd6f2fc892bcbe4e2cee28affd02520
2021-07-08interface: unable to to assign tx queue to last worker threadSteven Luong1-4/+3
Using the cli "set interface tx-queue", it is not possible to assign tx queue to the last worker thread. The reason is that vdm->first_worker_thread_index is 1. Adding that to clib_bitmap_last_set (bitmap) exceeds vdm->last_worker_thread_index when the CLI specifies the last worker thread. Also make the threads argument optional to enable user to unbind a queue from any thread. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I796259c20f571289c8f5a97b9418caf452d0ab3d
2021-07-08tap: Set the MTU on the TUN deivceNeale Ranns1-0/+13
Type: fix For a TAP device the MTU is set via the ethernet_register for TUN we need to do it explicitly (like we do for other tunnel types). Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie6a13c795acb35b53f8d99b05c70c3e73a7b428e
2021-07-06tcp: use tcp output for half open connectionsFlorin Coras1-39/+12
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I05be39671a9ed0688d4e006f0f9354aa6560a41b
2021-07-06tcp: use main thread pool for half-opensFlorin Coras5-146/+29
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4b3427b966f9ff1ba8895fed7db662d56650f3f5
2021-07-06l3xc: reset dpo on deleteBenoît Ganne1-0/+1
When removing a l3xc path we must release the corresponding dpo. Type: fix Change-Id: Ib6309797cb11374264c786e064f262ad13c6f0a1 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-07-06vcl: fix packetdrill test errorwanghanlin1-1/+1
Type: fix Signed-off-by: wanghanlin <wanghanlin@corp.netease.com> Change-Id: I36d9affa5ee7160e95ee0ed463595bef752bbe9a
2021-07-06vcl: print current app state for timeoutwanghanlin1-2/+2
Type: fix Signed-off-by: wanghanlin <wanghanlin@corp.netease.com> Change-Id: Id701b1a1bee4e41b76d324ea05beb07ca57f825c
2021-07-06vcl: fix return value check for ldp_fd_to_vlshwanghanlin1-3/+3
Type: fix Signed-off-by: wanghanlin <wanghanlin@corp.netease.com> Change-Id: Iaad4022e84f4979016bb46c2ff5cfc5d43d6ff50
2021-07-06vrrp: Fix for test-all testcases failure.Rajaselvam1-18/+16
Failure due to the method vrrp_adv_packet scope and self reference. Type: fix Signed-off-by: rajaselvam <rajaselvam@gmail.com> Change-Id: I4ec14ea37928142651eb08fcc5736bc9c24ab062
2021-07-02build: remove unused files and sectionsDamjan Marion8-315/+0
Type: make Change-Id: Ia1d8c53c5fb02f7e5c86efab6e6ccd0fdb16bc96 Signed-off-by: Damjan Marion <damarion@cisco.com>
2021-07-02ipsec: ADD/update IPSec documentationNeale Ranns2-0/+200
Type: docs Signed-off-by: Neale Ranns <nranns@cisco.com> Change-Id: Ica576e13953a3c720a7c093af649d1dd380cc2c0
2021-07-02interface: api cleanupFilip Tehlar4-1439/+36
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I189bfcca2d5fa1f37d05a72c92d04bf260343043
2021-07-02sr: do not use vnet_all_api.hFilip Tehlar2-34/+33
.. as it is going to be removed. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Id3a4a4ea1e1b7361d43735bfa5470c28fc65209f
2021-07-02vlib: fix buffer pool alignment sizeTianyu Li1-1/+1
Alignment size should be CLIB_CACHE_LINE_BYTES(64) instead of CLIB_LOG2_CACHE_LINE_BYTES(6) Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: If2d5ae324093be64454377866297f5e76ccddc93
2021-07-02crypto: fix sw async crypto with chained buffersBenoît Ganne1-31/+30
When a buffer in the chain comes with a negative current_data offset, the conversion to sgl will skip it because of resetting offset to 0. Moreover, crypto_start_offset is relative to the 1st buffer data pointer so we should not check it against subsequent buffers anyway. Type: fix Change-Id: Id177a90bfda242a5372c7e8836cf6668e98c780e Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-07-02misc: Don't IPv[46] enable local0, it doesn't receive packets.Neale Ranns1-5/+0
Type: improvement local0 exists just to burn sw_if_index=0 so we catch common API errors. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I2901bb7d36d4c512e6698134a807bf9516ee05db
2021-07-01vmxnet3: support manual thread assignment to tx queueSteven Luong3-18/+26
Thread assignment to tx queue has always been automatic and there was no way to modify it. With this patch, it is now possible to use the cli "set interface tx-queue" to change the thread assignment to tx queue for vmxnet3 interface, thanks to the new tx infra. Type: feature Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I1544e3557f70251d4bd423cc3d9f28ee1d44db4a
2021-07-01ip: api cleanupFilip Tehlar5-1693/+88
Use autogenerated code. Does not change API definitions. Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I4b6d881571c158b7a69a78b9680732d090c4f8b5
2021-06-30memif: fix tx desc length for chained buffers in copy modeBenoît Ganne1-0/+1
When enqueuing chained buffer, we must update the descriptor length for each fragment descriptor in addition to the last. Type: fix Change-Id: I9bc95fe557a049eeea4abd41c695153632d52a52 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-06-30rdma: fix chained buffer tx path in dv modeBenoît Ganne1-24/+20
When switching to the direct verb chain buffer tx path, we must account for all remaining packets, including the packets that would wrapped around. Previously we were using the 'n' counter but ignoring the 'n_wrap' counter: if some packets would have wrapped around in the default path, it would be ignored by the chained buffer tx path. Compute the correct number of remaining packets based on the old and current txq tail instead. Also simplify the chained tx function parameters. Type: fix Change-Id: If12b41a8f143fda80290342e2904792f7501c559 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-06-30memif: fix chain buffer length in zero-copy modeBenoît Ganne1-0/+1
The total_length_not_including_first_buffer field must be reset before being updated otherwise it will quicly grows as stale values are reused. Type: fix Change-Id: Ic48c0822660998b0dfc0b5fdeadae6071b2d03f7 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-06-30vcl: coverity fixesFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I290e4b0dff6afe7ce755074f3aaaf945dbbf3e09
2021-06-30ipsec: Derive the TUNNEL_V6 flag from the configured address typesNeale Ranns3-3/+8
Type: improvement There's no need for the user to set the TUNNEL_V6 flag, it can be derived from the tunnel's address type. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I073073dc970b8a3f2b2645bc697fc00db1adbb47
2021-06-29session: free ctrl event data on connect rpcFlorin Coras1-0/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I56c4682aef59ed0e69073f9001341c425e65bd48
2021-06-29ipsec: Fix setting the hi-sequence number for decryptNeale Ranns9-327/+1245
Type: fix two problems; 1 - just because anti-reply is not enabled doesn't mean the high sequence number should not be used. - fix, there needs to be some means to detect a wrapped packet, so we use a window size of 2^30. 2 - The SA object was used as a scratch pad for the high-sequence number used during decryption. That means that once the batch has been processed the high-sequence number used is lost. This means it is not possible to distinguish this case: if (seq < IPSEC_SA_ANTI_REPLAY_WINDOW_LOWER_BOUND (tl)) { ... if (post_decrypt) { if (hi_seq_used == sa->seq_hi) /* the high sequence number used to succesfully decrypt this * packet is the same as the last-sequnence number of the SA. * that means this packet did not cause a wrap. * this packet is thus out of window and should be dropped */ return 1; else /* The packet decrypted with a different high sequence number * to the SA, that means it is the wrap packet and should be * accepted */ return 0; } - fix: don't use the SA as a scratch pad, use the 'packet_data' - the same place that is used as the scratch pad for the low sequence number. other consequences: - An SA doesn't have seq and last_seq, it has only seq; the sequence numnber of the last packet tx'd or rx'd. - there's 64bits of space available on the SA's first cache line. move the AES CTR mode IV there. - test the ESN/AR combinations to catch the bugs this fixes. This doubles the amount of tests, but without AR on they only run for 2 seconds. In the AR tests, the time taken to wait for packets that won't arrive is dropped from 1 to 0.2 seconds thus reducing the runtime of these tests from 10-15 to about 5 sceonds. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Iaac78905289a272dc01930d70decd8109cf5e7a5
2021-06-29tcp: add ACK flag to RST packetliuyacan1-1/+1
According to RFC 793, the ACK control bit is always sent once the connection is established. Type: fix Signed-off-by: liuyacan <liuyacan@corp.netease.com> Change-Id: Id0fe19114a0cc468dbce4c0938b345c2ac339e73
2021-06-29vcl: improvements to epoll ltFlorin Coras3-52/+85
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: If585b9c48f67599c56a8c4b4a5139375bc4287f6
2021-06-29ipsec: increment SPD policy counters for bypass and discard actions in ↵Zachary Leaf1-0/+20
ipsec4_input_node ipsec_spd_policy_counters are incremented only for matched inbound PROTECT actions (:273 and :370). BYPASS + DISCARD actions also have SPD policy counters that should be incremented on match. This fix increments the counters for inbound BYPASS and DISCARD actions. Type: fix Signed-off-by: Zachary Leaf <zachary.leaf@arm.com> Change-Id: Iac3c6d344be25ba5326e1ed45115ca299dee5f49
2021-06-29vcl: Don't use app_socket_api to notify VPP in parent when child exitedwanghanlin1-1/+5
Type: fix Signed-off-by: wanghanlin <wanghanlin@corp.netease.com> Change-Id: Icd2fc3cc2d0a0a6060abfb262044cf9e09ab4ba2
2021-06-29vcl: Don't memset events to optimize CPU usagewanghanlin1-8/+6
In stress test case, memset may consume a lot of CPU because vls_epoll_wait is called very frequently. Type: improvement Signed-off-by: wanghanlin <wanghanlin@corp.netease.com> Change-Id: I9b4e1d6e1c4d7217cf0b2529d8efed792dea7b40
2021-06-28vcl: epoll fix postponed evt handlingFlorin Coras1-6/+33
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I3d208f8ef4638e7557929f4b2bca4d640af85baa
2021-06-28ipsec: Split the SA add_del API into an separate add and delNeale Ranns3-56/+100
Type: improvement the rationale being that the del only requires the SA's ID, so it's a bit mean to require the client to fill out all the other information as well. Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ibbc20405e74d6a0e1a3797465ead5271f15888e4
2021-06-28ipsec: Enable the extended Sequence Number IPSec tests for GCMNeale Ranns1-2/+72
Type: test Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Ie691b1c8841f5e195525bfff990f12ab918ba394
2021-06-26vrrp: prevent segfault in multicast join due to missing LL AddrJon Loeliger1-2/+5
If an IPv6 Link Layer Address is missing from an interface, treat it as a down interface. While this fails to send a VRRP multicast group join, it also prevents a seg fault. Type: fix Fixes: 39e9428b90bc74d1bb15fc17759c8ef6ad712418 Signed-off-by: Jon Loeliger <jdl@netgate.com> Change-Id: Iebf69bb30604a96de6587655eb872aa818158a56
2021-06-25stats: reverts part of a fix on Python clientArthur de Kerhor1-12/+4
Puts return statements back inside code blocks under the lock Type: fix Change-Id: I76d426f336200035026b92bcb0ffe2b472a3142d Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
2021-06-25stats: revert "add a retry mechanism in a symlink test"Beno�t Ganne1-15/+1
This reverts commit d70777aa60a87001f323f3b226d7e5cee2cd23d8. Reason for revert: wrong fix Type: fix Change-Id: Ibff1b977eae8d2cc85888165ebf83c42eb661698 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2021-06-25stats: fix race conditions in vpp-api stats clientArthur de Kerhor1-4/+12
Type: fix Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com> Change-Id: Ie5c197f6ec0d41d5e405b22662701d83ad94d29e
2021-06-24session: fix session formated str output truncated in cliXiaoming Jiang2-12/+16
Type: fix Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com> Change-Id: I2c2b739a5aa246bbf53d6663efd403c3aee9dddd
2021-06-24linux-cp: stop managing adjacencies for tunnelsAlexander Chernavin1-0/+12
Type: fix Outbound packets which arrive on tun/L3 interfaces use a default adjacency for the interface & address family from the corresponding interface pair. However, there are entries in the linux-cp adj table that are created for them. Managing these entries might cause a segfault because the rewrite data might exceed the reserved space for it of 28 bytes in the linux-cp adj key (e.g. in case of GRE IPv6). With this change, stop creating adjacencies for tun/L3 interfaces in the linux-cp adj table and delegating them. Signed-off-by: Alexander Chernavin <achernavin@netgate.com> Change-Id: I4bcd685860053ab87c65064c182e3ed53fd4fae9