Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I964cb44f8604187390009dcef7dd766b3804c3ca
Type: make
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
The copying of the first segment copied too small amount of data.
The copying of the second and subsequent segments used the wrong
data offset - for the case of GSO enabled it starts from 12 bytes
earlier.
Change-Id: I3adc532c175babc1ca1e121c7e12e6cafbdb9974
Type: fix
Ticket: VPP-1700
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: feature
Change-Id: I637ca85bb0c5c3e9704e242747b1174bfcd74e02
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: refactor
Change-Id: Id68c5ae6d57df0fc556bbf583a66e538e641ffb1
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Change-Id: I808ae95666b82f04979b57cfe237a8f83bb68264
Type: fix
Fixes: 283cd2e9af
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
NAT session details are output to the test results.
Twice NAT44 OK
Acquire twice NAT44 addresses from interface OK
21:10:42,661 NAT44 sessions:
-------- thread 0 vpp_main: 1 sessions --------
172.16.1.2: 0 dynamic translations, 1 static translations
i2o 172.16.1.2 proto tcp port 8080 fib 0
o2i 10.0.0.3 proto tcp port 80 fib 0
external host o2i 172.16.2.2:4567 i2o 10.0.1.3:42296
index 1869
last heard 97.99
total pkts 2, total bytes 80
static translation
load-balancing
twice-nat
Twice NAT44 local service load balancing OK
NAT44 translate packet with unknown protocol OK
Type: test
Change-Id: I932a4a1133d597bb82da6e04f2ea833094a481da
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Eases troubleshooting.
Changes:
<FuncWrapper object at 0x7fa7402de790>
to
<FuncWrapper(func=<want_ip6_ra_events(u16 _vl_msg_id, u32 client_index, u32 context, u8 enable_disable, u32 pid)>)>
Type: refactor
Change-Id: I3a893090e024a63a0b3b0de51cb3bb2d2a1678c5
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Return VNET_API_ERROR_INVALID_VALUE intead of 1.
Type: fix
Change-Id: Ie5465cad9ca07b9147306a808e8b13d0c4867913
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Fixes: 8389fb9
Change-Id: I31076db78507736631609146d4cca28597aca704
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This patch adds support to configure host mtu size using
api, cli or startup.conf.
Type: feature
Change-Id: I8ab087d82dbe7dedc498825c1a3ea3fcb2cce030
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Prepend sudo to the gdb command line.
Type: test
Change-Id: I09013c3ca512e26de0c46c02f643b21064ba499c
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
this change is being made to fix a crash when current_data < 0 in buffer
linearization function
Ticket: N/A
Type: fix
Fixes: f883f6a1132ad4bb7aa9d9a79d420274fbcf3b64
Change-Id: Ia4ede823f673780e0c30d075b091db42e183650d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type:fix
Make sure tnil color is black and that the right node colors are
updated.
Change-Id: Ibd9d7ea9438df4dab977202955957824723a865d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: feature
Change-Id: Id487fe46194d0a89bd5ac53a9f4ff78b5ff6de60
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: refactor
Change-Id: I492b6e88acadf0ab0e4d7b1c0c5d1cab84c1726f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: style
Change-Id: I81c281c7277dbaea499f3072e01e7f59bf646825
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Use proper length for copying l2 layer in ah encrypt code. Previously
code assumed that there is alywas just one ethernet header preceding IP
header, which might not be true always.
Change-Id: I176fd93b25cf1b9d9c2dc4e420ad48a94d5f4fb8
Ticket: VPP-1539
Type: fix
Fixes: N/A
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
ASSERT (b[0]->current_length > 0) fails in single loop of
function vnet_interface_output_node_inline_gso.
Under 'do_segmentation' condition, there are two places in code
which execute "continue" in while-loop without incrementing the
pointer to next buffer which is wrong behavior. In fact, at one
place, current buffer is also freed. In which case, during next
iteration buffer ptr still points to free buffer which current
length is 0 and triggers the above assert.
Type: fix
Change-Id: Ic9d540748c1d00a54e18acc2b0f23730728d7460
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: make
Change-Id: I8a28707a14ca6bcaf44b2a26dfc30ef2f2dbe749
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Move output to log.txt.
11:51:58,111 Verifying against 3 packets in verify_udp_pkts.
11:51:58,111 ###[ Ethernet ]###
dst = 02:fe:4c:62:06:e5
src = 02:01:00:00:ff:02
type = 0x800
\###[ IP ]###
version = 4
ihl = 5
tos = 0x0
len = 128
...
Type: test
Change-Id: Iebaf34c2ac16e7fa8dffbdeadf18ab6c5f4c7494
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
rw_len (MPLS rewrite string length) is declared as unsigned but is used
as -rw_len with vlib_buffer_advance(), resulting in a wrong, huge
offset.
Type: fix
Fixes: 734d430f37251bc7e71d507983ee640ae1625fbe
Ticket: VPP-1705
Change-Id: I7357249f7e50b7d30fd61f5be4858a26e43df85d
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
dequeue_notify callback at app-layer needs to know available space in fifo,
so, session_dequeue_notify should be called after svm_fifo_dequeue_drop
Change-Id: I136675d29ec32bea9b33a05deb6710f72ce8d5b1
Signed-off-by: Vladimir Kropylev <vladimir.kropylev@enea.com>
|
|
New job submitted to Jenkins reported checkstyle failure in
test_stats_client.py. It needs a blank line in one place and line is
too long in another place.
Type: fix
Change-Id: I9b18df1df449a287570d614d6c5b514ceb88480c
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: feature
Change-Id: If9804d3685d2a52efa06e412ae1ebb39c6a44b8b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: fix
Change-Id: I1f8007ae659097152046aa1396cc23f126e29018
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Type: make
Change-Id: If82324f27163ab4ea270aac909c48a95dd1621ec
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Ring data space is following ring vec_header_t and ring elements immediately.
Add verification code in session_test.
Type: fix
Change-Id: I0bfa096a9f459128a588821d99b5cdb4f10ede38
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Sirshak Das <Sirshak.Das@arm.com>
|
|
Type: feature
Add support for insert/search/del with custom compare function.
Change-Id: Ibb740afc224d8adc29d3e1b51b46cdd738d1bd93
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
please consult the new tunnel proposal at:
https://wiki.fd.io/view/VPP/IPSec
Type: feature
Change-Id: I52857fc92ae068b85f59be08bdbea1bd5932e291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Enhance the route add/del APIs to take a set of paths rather than just one.
Most unicast routing protocols calcualte all the available paths in one
run of the algorithm so updating all the paths at once is beneficial for the client.
two knobs control the behaviour:
is_multipath - if set the the set of paths passed will be added to those
that already exist, otherwise the set will replace them.
is_add - add or remove the set
is_add=0, is_multipath=1 and an empty set, results in deleting the route.
It is also considerably faster to add multiple paths at once, than one at a time:
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.11
100000 routes in .572240 secs, 174751.80 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.12
100000 routes in .528383 secs, 189256.54 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.13
100000 routes in .757131 secs, 132077.52 routes/sec
vat# ip_add_del_route 1.1.1.1/32 count 100000 multipath via 10.10.10.14
100000 routes in .878317 secs, 113854.12 routes/sec
vat# ip_route_add_del 1.1.1.1/32 count 100000 multipath via 10.10.10.11 via 10.10.10.12 via 10.10.10.13 via 10.10.10.14
100000 routes in .900212 secs, 111084.93 routes/sec
Change-Id: I416b93f7684745099c1adb0b33edac58c9339c1a
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Fixes: 58492a8372
Change-Id: Ia2eeebc2488b57e57f8d5e52f9948d1cced7b6fc
Type: fix
Ticket: VPP-1698
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
This fixes two leaks in registering errors in the stats segment.
- The error name created by vlib_register_errors() was not freed.
- Duplicate error names (when interface readded) was added to the vector.
This fix also adds memory usage statistics for the statistics segment
as /mem/statseg/{used, total}
Change-Id: Ife98d5fc5baef5bdae426a5a1eef428af2b9ab8a
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: test
Change-Id: Ic81bd4a9eba3c89a746e7a9b9e471b59cd87fa40
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Previous use of strndup() required user to remember to call free().
Now return a vector pointing directly to the API message string.
Of course user must remember to copy the string out if lifetime
is longer than API message lifetime.
Change-Id: Ib5e2b3d52d258e1a42ea9ea9a9e04abbe360e2bf
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Check the returned pointer, report error and return in case of failure.
This avoids crashing without any useful clues or debug messages.
Type: fix
Change-Id: I15d0735a531c2d9a8b6f67b7d6fe326b98c963c3
Signed-off-by: Lijian Zhang <Lijian.Zhang@arm.com>
Reviewed-by: Honnappa Nagarahalli <Honnappa.Nagarahalli@arm.com>
|
|
Type: refactor
Change-Id: I4981704e3c886d90d482a1deba42633e92626743
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This change is made fix a crash, because is_feature flag semantics turn
out to be different from "custom app code" semantics. Introduce a flag
which custom plugins/apps can use to instead of tying that code to
is_feature flag.
Change-Id: Ief5898711e68529f9306cfac54c4dc9b3650f9e3
Ticket: N/A
Type: fix
Fixes: 21aa8f1022590b8b5caf819b4bbd485de0f1dfe5
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Type: feature
Change-Id: I53e1f05b2b048925fca3b2f6b0499ff9c3e6ee12
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Fixes: b4ff07a
Change-Id: I2578ae3e093961fa8765568b5fedcf75ae9487f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Change-Id: I3d7009505ddbb2c41d8619d9195c6a5373fa9a04
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Two codes diverged in the packet processor
And sorry I could not use them both
Long I stood being but one developer
And studied one as far as I could
To where the code said bitwise OR
Then took the other, as just could see,
And having perhaps the better bit,
Because it followed the RFC
And used the cryptic XOR in C,
Had run them both a fair bit.
And both equally ran that morning
With packets dropped and flowing.
Oh, I flagged the first for dropping!
Yet knowing bug leads to debuging
I hoped I'd never be returning.
I shall be commiting this with a sigh
Somewhere ages and ages hence:
Two codes diverged by a bit, and I,
I made the packets flow on by,
And that has made all the difference.
Type: fix
Change-Id: If2698726d5501fde76211994f8efc37119345352
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
An SA can be used only for ESP or AH nver both, so it needs only one
coresponding DPO.
Type: refactor
Change-Id: I689060f795ee352245a0eaed0890a6b234c63d71
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
rather than SRC/DST address error which is not so helpfull
Type: fix
Fixes: af3f0783
Change-Id: Ie2143e4e29de87d93e79bd96284c041bdbffd98e
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: refactor
Change-Id: I97fa59a0ba0b6b7a98698926020ffffcf6ae6ba3
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Show the constructor of the object instead of the memory location.
api client: <VPPApiClient apifiles=None, testmode=False,
async_thread=True, logger=<logging.Logger object at 0x7f35d1bd2590>,
read_timeout=1, use_socket=False,
server_address='/tmp/vpp-unittest-TestGbpApi-pOKbWg/api.sock'>
vs.
api client: <vpp_papi.vpp_papi.VPPApiClient object at 0x7fa0003df750>
Type: feature
Change-Id: I1460d76f6796776dd525c0844e9e426ec2d52398
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: feature
Change-Id: Ie020fd7e2618284a63efbeb9895068f27c0fb9ab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Costs nothing, and leaves nothing to the imagination.
Type: fix
Change-Id: I7c9f9fb9325475c268eca062da7bbbf014438cfc
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Fixes: 8d7c502002
Change-Id: Ia6de250f20200c17937d9d7b2aab17ccd81d7823
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: docs
Change-Id: I09f6984b74ebb7ee743881b4ad496618542eeaa5
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Many missing "extern" declarations, it's hard to imagine why the
related compile/link errors just showed up.
Type: fix
Change-Id: I0878bf5fdb10ffdd8e0c49c9e5153cddaf3bc1fd
Signed-off-by: Dave Barach <dave@barachs.net>
|