Age | Commit message (Collapse) | Author | Files | Lines |
|
Top level makefile is using vpp as the default platform. The other place
where platform is specified has native as the default. Unite them to the
only currently supported platform - vpp.
Type: make
Change-Id: Idb12ccc3056dd6be640a2d6763dc30e4f789d2ac
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
(cherry picked from commit 664ec91fdea75c90c3b9c8086a9a97df32a6f91b)
|
|
Encoding the vpp node index into the vlib_error_t as a 10-bit quantity
limits us to 1K graph nodes. Unfortunately, a few nodes need 6 bit
per-node error codes. Only a very few nodes have so many counters.
It turns out that there are about 2K total error counters in the system,
which is (approximately) the maximum error heap index.
The current (index,code) encoding limits the number of interfaces to
around 250, since each interface has two associated graph nodes and we
have about 500 "normal, interior" graph node
This patch adds an error-index to node-index map, so we can store
error heap indices directly in the vlib_buffer_t.
Type: refactor
Change-Id: I28101cad3d8750819e27b8785fc0cf71ff54f79a
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 687c9021fda009caa2b7eb17bea2eaa51d275bde)
|
|
We reserve 40 slots in cpu->copy array prior to copy out to avoid overflowing
the array. However, 40 is not enough for the jumbo frame because desceiptor
buffer len is likely at 1536. Change the reserve to 200 and add ASSERT to avoid
encountering the same problem in the future.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ibf0c03c4b4f33e781d5be8679ccd6c3a4b4a646d
(cherry picked from commit 7331005c16d0e1499080899b2a0676a0cd945595)
|
|
In a rare event, we may be skipping processing lacp pdu's when the it is
not in steady state.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0872c49e10bbd3538398030a2aa0fa4c3b7e9426
|
|
Type: fix
Change-Id: Ib7ac53d1b59b641ccd3b1d733107d7f1ba174314
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit a66020becd7d01eefea55244cbcf5df9679a9443)
|
|
In a rare event, after the vhost protocol message exchange has finished and
the interface had been brought up successfully, the driver MAY still change
its mind about the memory regions by sending new memory maps via
SET_MEM_TABLE. Upon processing SET_MEM_TABLE, VPP invalidates the old memory
regions and the descriptor tables. But it does not re-compute the new
descriptor tables based on the new memory maps. Since VPP does not have the
descriptor tables, it does not read the packets from the vring.
In the normal working case, after SET_MEM_TABLE, the driver follows up with
SET_VRING_ADDRESS which VPP computes the descriptor tables.
The fix is to stash away the descriptor table addresses from
SET_VRING_ADDRESS. Re-compute the new descriptor tables when processing
SET_MEM_TABLE if descriptor table addresses are known.
Type: fix
Ticket: VPP-1784
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I3361f14c3a0372b8d07943eb6aa4b3a3f10708f9
|
|
Missing an increment in the while loop. Hashes not stored in the array.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I603027f5a7305478f48a102ac8035ffde9102c53
|
|
Type: fix
Change-Id: Ie6eaccb27779bb14c0a23764a16cd22f0a72e379
Signed-off-by: Ed Kern <ejk@cisco.com>
|
|
In some cases it may happen that buffer is allocated by DPDK, and freed
by VPP native code. In such cases dpdk metadata is not reset, so we need
to do that during mempool dequeue. Template approach is taken to reduce
cost of that operation.
Type: fix
Fixes: 910d369
Change-Id: Ic239007cfc8fbceb965021c56963cda9d53f63be
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In eth_input_process_frame(), a loop which checks the destination
MAC address of received packets had a different condition for avx2
than it did for the non-avx2 version of the loop. It could result
in one unnecessary execution of the loop body after all packets
had been processed.
Type: fix
Fixes: 8d6f34e2b1cbfde5702e88686631527d5e1e10a0
Change-Id: Ib673f45917a0dea461987fdc8f0ca318b749fb1a
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit a6d4e3135b70db1b1df3f8852e1e229d13c24e72)
|
|
vlib_increment_combined_counter takes sw_if_index, not hw_if_index. Using
hw_if_index may work as long as there is no subinterface created to cause
hw_if_index and sw_if_index to differ.
Type: fix
Ticket: VPP-1759
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I6db042186eeeacf32250f7ef261af8cd6f5ce56e
(cherry picked from commit efa119db3910e77f79eb005c67f8c01b473b40a1)
|
|
show interface does not display the RX counters for the bond
interfaces. It displays rx-no-buf instead.
The problem is VNET_INTERFACE_COUNTER_RX is a combined counter,
not a simple counter. Change the code to use
vlib_increment_combined_counter passing it with n_rx_packets and
n_rx_bytes.
Type: fix
Ticket: VPP-1757
Change-Id: I8121ad7e546447049fa13da62481b6c8f5575bec
Signed-off-by: Steven Luong <sluong@cisco.com>
(cherry picked from commit c94afaade0a8fec724d051a202591f5b37dd0f49)
|
|
Manual port from master due to conflict.
Type: fix
Ticket: VPP-1755
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ieb1211f828e60e2bd9e038009939248761cb8370
|
|
Type: fix
Change-Id: I48650473591aa181167cf3a86ed2f5da58a81072
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Fix ip6_tcp_udp_icmp_compute_checksum to work properly for packets
with multiple buffers.
Fix ip4_tcp_udp_compute_checksum to exit upon detecting error.
Type: fix
Signed-off-by: John Lo <loj@cisco.com>
Change-Id: I673547f4479d72cd60757383343fc562cff10265
(cherry picked from commit 3bc6bc21fb79a9da4ec674f5e6a3303e7e2be625)
|
|
Type: fix
Ticket: 1729
The flags that are permanently set on a path-list should form part of
its key in the path-list DB. Otherwise, if shared, they will not behave
as expected.
Change-Id: I0aa7c7c5d270c97b08014e4a47ddbdcee2358706
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit 80d1ef96f92c15f4fd357af9845a0a3c602c2ffe)
|
|
Change-Id: I1ee3909e042e56fd4caf3732762e9a9276aa6db1
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Multiple API message handlers call vnet_get_sup_hw_interface(...)
without checking the inbound sw_if_index. This can cause a
pool_elt_at_index ASSERT in a debug image, and major disorder in a
production image.
Given that a number of places are coded as follows, add an
"api_visible_or_null" variant of vnet_get_sup_hw_interface, which
returns NULL given an invalid sw_if_index, or a hidden sw interface:
- hw = vnet_get_sup_hw_interface (vnm, sw_if_index);
+ hw = vnet_get_sup_hw_interface_api_visible_or_null (vnm, sw_if_index);
if (hw == NULL || memif_device_class.index != hw->dev_class_index)
return clib_error_return (0, "not a memif interface");
Rename two existing xxx_safe functions -> xxx_or_null to make it
obvious what they return.
Type: fix
Change-Id: I29996e8d0768fd9e0c5495bd91ff8bedcf2c5697
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit 3940de36728b768574a3e998389bb90d55f690d1)
|
|
Some combinations of new qemu (2.11) and old dpdk (16.10) may
send VHOST_USER_SET_FEATURES at the end of the protocol exchange
which the vhost interface is already declared up and ready.
Unfortunately, the process of VHOST_USER_SET_FEATURES will cause
the interface to go down. Not sure if it is correct or needed.
Because there is no additional messages thereafter, the hardware
interface stays down.
The fix is to check the interface again at the end of processing
VHOST_USER_SET_FEATURES. If it is up and ready, we bring back
the hardware interface.
Type: fix
Change-Id: I490cd03820deacbd8b44d8f2cb38c26349dbe3b2
Signed-off-by: Steven Luong <sluong@cisco.com>
(cherry picked from commit 545866b5b3115b7de114bdb7883f5ece59b702d4)
|
|
A waste of binary API trace space; an otherwise idle control-plane
will eventually fill the api trace buffer with them.
Type: fix
Ticket: VPP-1725
Change-Id: Id8338ea4070cd76481595005986efc558f0694e6
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Ticket: VPP-1721
Change-Id: I7a5d4f1440048ddc9f599ac11d06e5a7df20440e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
(cherry picked from commit 0f09a47f10e29cabeb98f571e5c4f0c18a54564d)
|
|
Type: docs
Change-Id: I3f9d243d6f5d99faea67c24c9bf5c42c7a4dc3b0
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: fix
Fixes: f7a55ad74c
Change-Id: Ic3474e746887f880a8f6246bebc399715bac8e80
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Type: fix
Fixes: 231c4696872cb344f28648949603840136c0795d
This reverts commit 231c4696872cb344f28648949603840136c0795d.
Change-Id: I136344555983dd10a31dbc000ee40e2de2c91291
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This reverts commit 9b208ced585d3b4620d6fde586cd047fe2027ecf.
Type: fix
Fixes: 9b208ced585d3b4620d6fde586cd047fe2027ecf
Change-Id: I94a17039b4727bff0877423da5ba6cfceb188b17
Signed-off-by: Neale Ranns <nranns@cisco.com>
(cherry picked from commit d2029bc9c5947a8a676208bada9386e07ec16c97)
|
|
Change-Id: If6da62e5a49064ba27a3e0bb6e5d31b9b4d04ea3
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Ie504603c2e42cae3ad592952b2b166919420e5f7
Signed-off-by: Florin Coras <fcoras@cisco.com>
(cherry picked from commit f5dc9fbf814865b31b52b20f5bf959e9ff818b25)
|
|
Type:fix
Change-Id: Iab2c308739f7733dbf70953e0ea87dcc404c60da
Signed-off-by: Florin Coras <fcoras@cisco.com>
(cherry picked from commit f73d4c2084c9cb6df4a1f8582acef523e4ba0cb2)
|
|
Type: fix
Change-Id: I9e0e1bb933c38b17ac9fb8bf11b81e2fed021bf8
Signed-off-by: Florin Coras <fcoras@cisco.com>
(cherry picked from commit 182bbc1c5ab3d8607153dd19f0a24baaf5cbfc88)
|
|
AVF plugin is missing a handler for clearing stats. This patch will
implement it.
Ticket: VPP-1701
Type: fix
Change-Id: If4b4354da442065896bb001deda23f64ddc18fb4
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Fixes: b4ff07a
Change-Id: I2578ae3e093961fa8765568b5fedcf75ae9487f6
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit 39488c8d3064f8940ec4f826629ebb700649e6b5)
|
|
This fixes two leaks in registering errors in the stats segment.
- The error name created by vlib_register_errors() was not freed.
- Duplicate error names (when interface readded) was added to the vector.
Change-Id: If5fe371e8059cf6678fc785cbf673707b4f4a655
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
The copying of the first segment copied too small amount of data.
The copying of the second and subsequent segments used the wrong
data offset - for the case of GSO enabled it starts from 12 bytes
earlier.
Change-Id: I3adc532c175babc1ca1e121c7e12e6cafbdb9974
Type: fix
Ticket: VPP-1700
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 4f740c8f0085c0cd576744c00bf50a9d9b111470)
|
|
Fix a bug that mheap_get_trace is called with the wrong pointer when
mspace_get_aligned allocates a chunk with alignment greater than 16
but less than 4k.
Type: fix
Change-Id: Ic3b91fc9532248482662f019bbfa073da18645ed
Signed-off-by: Wei CHEN <weichen@astri.org>
(cherry picked from commit 5e282e93ad9f961d332cac9a033be33542979848)
|
|
Fix memory leaks in acl, vnet, and vlib components.
Type: fix
Change-Id: I61c84ebbacbbf3215db0d4aaa7699e8d5f8df2da
Signed-off-by: Steven Luong <sluong@cisco.com>
(cherry picked from commit 4221c8de596f3f3f66b4cbb36ad2d0c23486030c)
|
|
Add a string hash to make sure that strings in the string table are
unique. This optimization has been coded piecemeal in multiple places,
we should have made the underlying function do the work years ago.
Ticket: VPP-1707
Type: fix
Change-Id: I5010fd4926b9b80ce3a168748f6de64e333ef498
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
and "leak-check { <debug-cli-cmd> }"
Ticket: VPP-1703
Type: feature
Change-Id: Ie020fd7e2618284a63efbeb9895068f27c0fb9ab
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I2d1e2addb2e440c23c255ac7709169f7909cb0be
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
In order to receive multicast packets from the VF interface, promiscuos
mode must be enable.
Type: fix
Fixes: b4ff07a
Change-Id: I549bc37a05895d3355f2832c200e9262c95a27b5
Signed-off-by: Steven Luong <sluong@cisco.com>
(cherry picked from commit 607a23a1753ee8dc7e9150f09bb376553ed62639)
|
|
Add the number of worker threads and per worker thread vector rates to
the stats segment.
Change-Id: I3040108ec9fcdf5fdb6b9a950060dea9b3c88fd1
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
(cherry picked from commit f89a6de8f032536080c4a11b267bf921093d3740)
|
|
Change-Id: I005f96480e81f3e750c18261e78d0e401da7528e
Signed-off-by: Florin Coras <fcoras@cisco.com>
(cherry picked from commit 79fdfd61245a112ff08f5c3bc3fb1afd5db55fb9)
|
|
TBH, this looks like merge damage or some such. Perfectly fine NULL pointer
check, about three lines after it was needed.
Change-Id: I52831062e30533a59fb76b644ee5ae389676d2ae
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I2a69b29b9ecea2bfdf1832c184c7e63058a33b94
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Change-Id: Ie7a6c7b92a6beeb356f01384216a4982fb3d420e
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
In tap tx routine, virtio_interface_tx_inline, there used to be an
interface spinlock to ensure packets are processed in an orderly fashion
clib_spinlock_lock_if_init (&vif->lockp);
When virtio code was introduced in 19.04, that line is changed to
clib_spinlock_lock_if_init (&vring->lockp);
to accommodate multi-queues.
Unfortunately, althrough the spinlock exists in the vring, it was never
initialized for tap, only for virtio. As a result, many nasty things can
happen when running tap interface in multi-thread environment. Crash is
inevitable.
The fix is to initialize vring->lockp for tap and remove vif->lockp as it
is not used anymore.
Change-Id: Ibc8f5c8192af550e3940597c06992dfdaccb4c49
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Indirect buffers are used to store indirect descriptors
to xmit big packets.
This patch moves the indirect buffer allocation from
interface creation to device node. Now it allocates
or deallocates buffers during tx for chained buffers.
Change-Id: I55cec208a2a7432e12fe9254a7f8ef84a9302bd5
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: Ia68372d397504ede789e40e9f7e1b939d09bc81a
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
"make test" fails with invalid instruction on non-AESNI platform,
so do not register the ipsec-mb crypto backend in this case.
Change-Id: I61887e40ce3d39880e7da534b9dee00fd677d8fd
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit c74009dce1b2f1466112775a68a5608d754c7c76)
|
|
When the same worker thread processes packet for encrypt and decrypt,
ie. single worker with bi-directional traffic, given that the queue is
shared results in packets to be decrypted being dropped as the encrypt
always happens first for each main loop.
With this change, each crypto device queue is logically split into two
queues, each half the real size, avoiding the described problem.
Change-Id: Ifd3f15e316c92fbd6ca05802456b10a7f73f85da
Signed-off-by: Sergio Gonzalez Monroy <sgmonroy@gmail.com>
(cherry picked from commit d8a34a57b12200000bb42d1c55f1a99a0a473f4b)
|
|
External libraries headers such as DPDK, libibverb, quicly, etc. should
not be packaged in vpp-dev RPM.
Only package headers from vpp/ and vom/ subdirs.
Change-Id: Ief1454bd1261c8cf4dcd3b105e28f6852439e896
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|