Age | Commit message (Collapse) | Author | Files | Lines |
|
coverity is trying to outsmart human by guessing on COPY_PASTE_ERROR.
Have it your way.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0239c9745e21384aebbaf9e977962746b81ded58
|
|
The session db (bihash_40_56_t) was inheriting BIHASH_USE_HEAP=1 from
vppinfra/bihash_24_8.h through a convoluted set of #includes. Set
BIHASH_USE_HEAP in cnat_bihash.h, to avoid a surprise long after
anyone remembers the story.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I8aa3be09b306fc99ba0b6baa5096a0a6829a8951
|
|
Type: fix
The fib source IP6_ND is used for all link-local entries, hence
solicitation responses were sent for a peer's address. Constrain the
source check to also in clude the LOCAL flag, which indicates that the
link-local address is ours.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
|
|
This avoids chunk allocation/collection deadlocks if either of the sides
crashes.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I98619e6e035fa8688889ca34db2143c8898732df
|
|
Type: improvement
Change-Id: I260580cf2d32ff949f44d80c764937ee6102486c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add linux similar arping command to VPP.
syntax: arping [gratuitous] <address> <interface> [repeat <count>] [interval <secs>]
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I9267c054235207b8fae8e3f159246777eb0340dd
|
|
Replace clib_warning with vlog_log_debug when sending garp. There is nothing
to alert/warn the operator about sending garp. vlib_log is more appropriate.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ib88a2b46d2ab8b3c35162538ead0dd0983fb7093
|
|
Type: make
Change-Id: I20e1509092e79a91cc015b932a06af4b466bfc84
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This change allows one to inject multiple streams for different workers
on the same PG interface at the same time.
Type: improvement
Change-Id: I29d80369aabada261eda466e5a5d8d3518bb8bc8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I47b5b1ad693d131cfc332f6942c86967687a3f2b
|
|
Type: fix
Change-Id: I9bb19a5c9b5b48825f19a4ac124a3628ceaa081d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix ordering of feature nodes so that ACL runs after NAT in in2out
direction so it can properly track stuff like ports after NAT rewrite.
Type: fix
Change-Id: I2c689b64765628e9bc77108914f74c6c801d8ce2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Original set, start, stop, reset, show etc interface was somewhat cumbersome, we
can improve slightly by combining set and start.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I7b865b2c29d2ab32adbd24d7f8a580da6990bb76
|
|
Type: feature
Add output of field maximum reassembly length with others
ip reassembly configuration fields. This field can be configured
via vpp API, but there was no output of this field in vpp cli.
Output added for ipv4/ipv6 and full/shallow virtual nodes.
Signed-off-by: Anton Nikolaev <anikolaev@netgate.com>
Change-Id: Ibbd61aab26189d4a93d32e047d8f4e589fe9f8a5
|
|
Need to add msg_id_base to the index
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id7ebf168502e8fd811d8f2f0c5538e69e23242fb
|
|
Show % time spent per graph node in power level 0, 1 and 2.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I678ee812fa993af39568e9f9dfbf2396fc13ad42
|
|
Update of DPDK to latest stable release.
As this introduces new build dependency, it also adds install
of pyelftools to the build step. (note however that flush of pip downloads
cache dir is required)
https://doc.dpdk.org/guides-21.02/rel_notes/release_21_02.html
Type: improvement
Signed-off-by: Kepka, Krzysztof <krzysztof.kepka@intel.com>
Change-Id: I7ed2ca965f01c1062f5abc25ea428e8c1a016366
|
|
Type: refactor
It's only the nodes that require compiling for each arch,
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ibb2bfc756001735cc10ef0fd8db7e8b8358cf8e2
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I4a5d52d54aa2748008e896888bfeabb18a1088bb
|
|
The crypto op data offset passed into DPDK is relative to the mbuf
buffer address plus the mbuf data offset, therefore the mbuf data
offset needs to be set rather than left at whatever previous value it
was at, which is likely to be incorrect and result in the wrong
portion of the packet being encrypted/decrypted for GCM.
The fe->crypto_start_offset field is relative to the start of the vlib
buffer (as opposed to the current data pointer), so set the mbuf
data_off field to VLIB_BUFFER_PRE_DATA_SIZE when performing a GCM
crypto op enqueue to match the crypto_start_offset semantics. This
then matches the behaviour in the non-GCM case.
Type: fix
Change-Id: I0ac2a44139387158765a3e04cfcaa5ee6f11d395
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
|
|
Type: fix
Change-Id: I170f9d8c685f59b7ccf6f9ee7fdc1dcdf2a54fe1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Change-Id: If35b40168414807e928cb3026633ae9d2fa703ed
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add branches, branches taken (a meteric for branchy code), and branch
misses.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: If92d4aaf9d0a6e3b99b8c19e6311cc08ca470590
|
|
Type: feature
Change-Id: Ibfc412200ef5932fa40423075967df6d9156f3ed
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Use actual thread index from hash table instead of doing calculation.
Calculated index might be different and could lead to crash.
Type: fix
Change-Id: Iede9a67fbe541cb44eccd0d6ddf4e2c51eb35423
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibbb72e77c751b7e775620cfb160b52ceff2da86b
|
|
Type: fix
Coverity scan issue fix.
Change-Id: I9036fade15fd381da9c1e6b575f250fdcb21f876
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Adding support for enable&disable calls
(dynamic plugin configuration).
API (nat66_plugin_enable_disable) and
CLI (nat66 plugin enable/nat66 plugin disable) with support for
outside_vrf id configuration.
Change-Id: I5637ff1621d6662adc3b7c6f7f8176d84a4b492b
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This avoids
ModuleNotFoundError: No module named 'virtualenv.seed.embed.via_app_data'
https://github.com/pypa/virtualenv/issues/1873
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I860cc8c4ad2ba509815c5e7cf02fa5e01ee2ed63
|
|
Signal, and implicitly run, main thread session queue node via
interrupts instead of the queue process node.
Process node still needed for timers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5efd393effc8dad65e4125a3d0ad1be6b7484cb7
|
|
Type: fix
Change-Id: Ia7652fe8e8c20f4f7a019ab7ca0649c2180c7e90
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The reimplementation of python stats module mishandled the case
where pattern to ls was not a list.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9ba189423a76f2fd4298c4c4b19a0875f705d719
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I65373f2cd5a33381da1e51ed7ab7a8b1358cef29
|
|
Type: feature
Added make target to install VPPTop - real-time
viewer of VPP metrics.
New targets in /extras/vpptop/Makefile:
* make start - starts the installed VPPTop binary
* make install - does the installation using the local VPP API
* make cleanup - removes the VPPTop local directory
* make help - prints the VPPTop help info
Signed-off-by: Vladimir Lavor <vlavor@cisco.com>
Change-Id: I1b93eaf67214e1fe0567d43409763882caea6416
|
|
Use correct vlib_main() in various code parts. Fix tests.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia379f3b686599532dedaafad2278c4097a3f03f3
|
|
CID #220403 ~ 220406
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibb65f9f2b17b9a9d45c077933b033ca3a65ae42f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id3ad783a7b0321a8fa37b4e606c0c4551ca4edd4
|
|
Add option to use per app private segments for app to vpp message
queues, as opposed to exposing internal message queues segment.
When so configured, internal message queues are still polled by the
session queue node but external app message queues are handled by a new
input node (appsl-rx-mqs-input) that runs in interrupt state. Signaling
of the node, when mqs receive new messages, is done through eventfds
epolled by worker epoll input nodes.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iffe8ce5a9944a56a14e6d0f492a850cb9e392d16
|
|
Type: fix
Signed-off-by: yedongggang <yedg@wangsu.com>
Change-Id: I5ec690e71fa9119a7bf1cfcb6e36263aa732eff0
|
|
- Refactor make test code to be co-located with
the vpp feature source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I66379dfe671628e39dfc9685c4fd70fa0e566f6f
|
|
If configure listen port more than 1 with epoll in nginx, only first
listen port can be registered successed in nginx worker process.
Type: fix
Signed-off-by: nandfan <fanyufei521@outlook.com>
Change-Id: Iec2e058ee972a2cd5b2d1d7d20d373dc17084ce1
|
|
Type: improvement
Change-Id: I1152e58d7bfcb3c4347147f87a834d45ad51cdfe
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: refactor
Change-Id: I8b273bc3bf16aa360f031f1b2692f766e5fc4613
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: I73383eb15186021cd6527d112da8443a0082f129
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: If3da7d4338470912f37ff1794620418d928fb77f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- Refactor make test code to be co-located with
the vpp plugin source code
Type: test
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
Change-Id: I09d55301665449b3f183191537749435f806fb15
|
|
This patch enables ip4, ip6, ip6-n-tuple, l2tpv3 esp ah flows in avf plugin
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I92c6d4217a6cce4085ee83e8beb4b037c8d7da5f
|
|
Type: improvement
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I24fa52fee88dabad8f0b84446f796ee055819617
|
|
This patch adds the flow support to VPP avf_plugin.
Currently only IP4-N-TUPLE and GTPU flow are supported as
a reference. More flows will be added later.
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I563dbfacecd3eba31e8c3c7769142ea6adba54b6
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9488ad7e045c908b60b5821d9c48583f6d513c2f
|