summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-04-25Python-API: Support for zero-length arrays from caller to VPP. (Previously ↵Ole Troan1-20/+26
only VPP to caller was supported.) Change-Id: Id660caeb780f3b26cc091467291463980f485178 Signed-off-by: Ole Troan <ot@cisco.com>
2016-04-24Updated .gitignore for Python API generated fileKeith Burns (alagalah)1-0/+1
Change-Id: I7c08b52124b44feb36e04a7fd417fe14b367cb44 Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-22Add clib_memcpy macro based on DPDK rte_memcpy implementationDamjan Marion142-803/+1407
Change-Id: I22cb443c4bd0bf298abb6f06e8e4ca65a44a2854 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-22Add a vpp_restart commandDave Barach4-5/+250
vpp_restart solves the problem of restarting vpp and not exiting until the new vpp instance is sufficiently established to allow immediate binary API connections. The point is to avoid using arbitrary "sleep N" commands e.g. in CSIT shell scripts. We send SIGTERM to the current vpp process, and expect / depend on the process-monitor du jour to remove the vpp-api shared-memory segment. vpp_restart exits w/ status 0 if all is well, non-zero upon failure. In trying to make vpp_restart reliable, we discovered a recently-introduced heap corruption bug in .../dpdk/init.c, which caused vpp to crash on startup once every 20 times on a particular rig. If possible, we should check /var/log/syslog for evidence of unexpected multiple restarts during regression-testing. Change-Id: Ic48c74b1a94a4368066ba2e326d4b12d51192088 Signed-off-by: Dave Barach <dbarach@cisco.com>
2016-04-22Fix duplicate freeDave Barach1-1/+2
Change-Id: Ifda07e476c74da9bfd7e21f02aa09160a0212e24 Signed-off-by: Dave Barach <dbarach@cisco.com>
2016-04-22Use memory from other CPU sockets if there is no localDamjan Marion1-0/+11
This fixes crash when local socket memory is not available so rx/tx queue setup fails. Here we simply retry operation without being so picky about memory location. Change-Id: I5bae47defe3c0fe120853378ed13141893284a5a Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-21Removing dpdk socket-mem from startup.confDamjan Marion1-4/+0
We allocate 512M of memory on each available cpu socket by default so this is not needed anymore in startup.conf Change-Id: Ib28b25df8d6722777a006aaddd1d56f21ab7b58a Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-21Fix warning in vppapigenDamjan Marion1-1/+1
Change-Id: I6301ece0d772fd5a6271edd07765b05ef0b63f21 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-21Add Broadwell-EP/EX to the uarch listDamjan Marion1-0/+1
Change-Id: I2ab84846ac88d3170b8c847914749e2a728dfa2b Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-20Remove execute flags from some dpdk patch filesDamjan Marion3-0/+0
Change-Id: I972b784082de45480baf1d1f07845743afddea40 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-20ubuntu 16.04 build support. Supporting systemd with vpp.service files.Srivatsa Sangli5-3/+56
Incorporating review comments : modified debian/control dependencies Change-Id: Ib2fe85d81eb7f1803ef8f54294c7c18cd07c61ba Signed-off-by: Srivatsa Sangli <srivrama@cisco.com>
2016-04-20Allow L3 forwarded jumbo packets on Bonded InterfacesJohn Lo1-16/+16
Set max L3 packet size allowed to the lowest value of the slave links. Also cleanup FIXME's for VMXNET3 driver. Change-Id: Ia5cf742f2ab13b8cdc8ea6286f56464ee4f8c51d Signed-off-by: John Lo <loj@cisco.com>
2016-04-20Python-API: Inital commit of Python bindings for the VPP API.Ole Troan60-10115/+1333
See: https://wiki.fd.io/view/VPP/Python_API Change-Id: If135fc32208c7031787e1935b399d930e0e1ea1f Signed-off-by: Ole Troan <ot@cisco.com>
2016-04-20delete loopback interface cliAlpesh S. Patel1-0/+6
(to be consistent with other delete interface commands) Change-Id: I41f63cc5b11d9fa9489edc54b17a4d857b711b66 Signed-off-by: Alpesh S. Patel <apatel9191@hotmail.com>
2016-04-20Cleaned up formatting in device.c - no functionality changes.Keith Burns (alagalah)1-64/+64
Change-Id: Ia7d83784d50b3651117201b876464528d015edea Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
2016-04-20Change from nsh-encap to nsh-vxlan-gpe within nsh vxlan tunnel's short_helpHongjun Ni1-1/+1
Change-Id: Ifeba2e9857a112139b7be6436b59f05858f1abf9 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-04-20Move "ethernet" debug cli commands to "set interface"Damjan Marion4-127/+78
Following two commands are changed: ethernet mtu -> set interface mtu ethernet promiscuous -> set inteface promiscuous Change-Id: I5037e021933156c06044fb723a05ad330f8162b7 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-20Add TAG=vpp_gcov which compiles vpp to produce .gcda filesDave Barach1-0/+5
Change-Id: Ib6a0940e08f9e0983f3ec70f9e8488c2185ca4da Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-19VPP-6: set epoll wait-time to zero when binary API messages are waitingDave Barach3-4/+9
Change-Id: I629ef98ecd3b729d2564b3a1ba8c6039f854f86c Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-18Add API to get the dpdk interface stats delta.Sean Hope4-22/+85
Internally change the clearing and displaying of the dpdk stats to be based on deltas. Change-Id: I76605ac67492a374ff5522ff44d4a0190cf94e18 Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
2016-04-18Add support for AArch32Christophe Fontaine31-66/+142
gcc version 4.9.2 (Raspbian 4.9.2-10) Tested on Linux raspberrypi 4.4.6-v7+ #875 SMP Tue Apr 12 16:33:02 BST 2016 armv7l GNU/Linux CPUs may be little or big endian, detect with gcc flags, not the processor architecture Add a new flag $(PLATFORM)_uses_openssl which allows to disable the link with openssl lib. vlib/vlib/threads.c: startup.conf must: - specify the heapsize as we don't have hugepages on raspbian cpu { main-core 3 } heapsize 64M Corrects in various files the assumption uword == u64 and replaces 'u64' cast with 'pointer_to_uword' and 'uword_to_pointer' where appropriate. 256 CPUs may create an OOM when testing with small memory footprint ( heapsize 64M ), allows the number of VLIB_MAX_CPUS to be set in platforms/*.mk vppinfra/vppinfra/longjmp.S: ARM - copy r1 (1st parameter of the setjmp call) to r0 (return value) vppinfra/vppinfra/time.h: On ARMv7 in AArch32 mode, we can access to a 64bit register to retreive the cycles count. gcc on rpi only declare ARM_ARCH 6. Override this info, and check if it is possible to use 'mrrc'. /!\ the time function will NOT work without allowing the user mode access to the PMU. You may download the source of the kmod here: https://github.com/christophefontaine/arm_rdtsc Change-Id: I8142606436d9671a184133b935398427f08a8bd2 Signed-off-by: Christophe Fontaine <christophe.fontaine@qosmos.com>
2016-04-17dpdk socket-mem handling optimizationsDamjan Marion3-68/+82
- introduces default socket-mem size of 512 MB per socket - default socket-mem value is applied to all discovered CPU sockets - fixes bug when < 1024 socket-mem parameter is specified - for socket-mem < 1024 code prefers 2 MB pages - improves handling of manualy specified socket-mem values Change-Id: I9ef848108d7dd1228fbd82a5be49eb5277a93683 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-16Using classifier/ACL from now on. Changes pertaining to that.rangan1-21/+52
Change-Id: I682b9a361c7308d6d0abb9d7d0320215f0d91e50 Signed-off-by: rangan <rangan@cisco.com>
2016-04-16ENIC driver patch to fix rx miss or drop countersJohn Lo3-0/+87
Change-Id: Ic05d182a5659417e91b85c0ae20b6822a5445945 Signed-off-by: John Lo <loj@cisco.com>
2016-04-15af_packet: clear bitmap entries when processing inputPeter Lei1-0/+1
Need to clear the bitmap entry when processing each input file descriptor. This becomes an issue on interface deletion. A crash occurs due to assertion in a debug image https://gerrit.fd.io/r/#/c/615/ - removed the code when this was set again, but the bitmap needs to be cleared Change-Id: I7cccb9bf8b9b2eb5a7f60ecda7530784a9512116 Signed-off-by: Peter Lei <peterlei@cisco.com>
2016-04-15Remove historical netconf message switch APIsDave Barach2-101/+0
The scheme is unused, and never to be used again; it was a bad idea in the first place. Change-Id: I1479a1fa9191e0374e00f7326545d216c3a11e32 Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-15Took care of code review comments. Extended the fix to other files.rangan2-0/+4
Change-Id: I24e688884cd5896b317efb53e1d193f7d363715a Signed-off-by: rangan <rangan@cisco.com>
2016-04-15Add LISP APIAndrej Kozemcak7-22/+1726
SET API: lisp_add_del_locator_set lisp_add_del_locator lisp_add_del_local_eid lisp_gpe_add_del_fwd_entry lisp_add_del_map_resolver lisp_gpe_add_del_iface SHOW API: lisp_locator_set_dump lisp_local_eid_table_dump lisp_gpe_tunnel_dump lisp_map_resolver_dump Change-Id: Ie7f521e7e64ad2736b8417852b38454bfdef3728 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-04-14Fix dependency install on Ubuntu 16.04Damjan Marion1-1/+1
Change-Id: I2a915a64c65ee78658ee782c0f16963024b8b2eb Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14Rework of DPDK PCI device uio driver binding processDamjan Marion8-410/+1284
This is complete rework of DPDK PCI initialization. It drops previous scheme where lspci/route/awk/sed are used and instead sysfs is solely used for discovering Ethernet PCI devices. Criteria for blacklisting device is changed from exsiting routing table entry to simple interface state obtained by SIOCGIFFLAGS ioctl(). It checks for IFF_UP flag, so as long as interface is declared up and even when carrier is down interface will be blacklisted. Change-Id: I59961ddcf1c19c728934e7fe746f343983741bf1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14Init rte_mbuf length fields in af_packet driverDamjan Marion1-0/+5
Change-Id: I30cdad9585c1457c0d8ceecb3e5110ad40740021 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-14Change ARP and IP6-ND nodes to use interface-output node for outputJohn Lo6-94/+28
The current mechanism for setting up arp-input and ip6-discover-neighbor output nodes for interfaces using their interface link up/down callback function is inefficient and has potential timing issue, as observed for bonded interface. Now both nodes will setup output interface sw_if_index in the the sw_if_index[VLIB_TX] field of current packet buffer and then use the interface-ouput node to tx the packet. One side effect is that vlib_node_add_next_with_slot() needs to be modified to allow the same output node-id to be put at the specified slot, even if another slot contain that same node-id already exist. This requirement is caused by BVI support where all loopback interfaces set up as BVIs will have the same output node-id being l2-input while, for output-interface node, the output slot must match the hw_if_index of the interface. Change-Id: I18bd1d4fe9bea047018796f7b8a4d4c20ee31d6e Signed-off-by: John Lo <loj@cisco.com>
2016-04-14Fix vppinfra unit testsFlorin Coras3-5/+10
"make check" in build-root/build-$tag-$arch/vppinfra should now work on a machine with 3G of spare memory Change-Id: Ie6a22e8496b56b93aa90fdc81e3e0c10dc7514fb Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-14Move autogenerated vnet files to config folderFlorin Coras1-0/+2
This cleans up vnet folder however it doesn't clean the existing autogenerated files. I'm not aware of any automated solution to achieve this without involving git. Change-Id: Ib29869e08e1d3bd87b7b54bc414f88bd9c632372 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-04-14Opaque index is not populated when ACL is configured. Fixed it.rangan1-1/+6
This is inline with ip6_classify.c Change-Id: Ib6e1f6fa3e4669e0a94e4ae2da48eacb240d192b Signed-off-by: rangan <rangan@cisco.com>
2016-04-13VHOST counters reversedShesha Sreenivasamurthy2-7/+10
VHOST counters are reversed. RX packet count are shown as TX and vise-versa in "show hardware" statistics. Change-Id: Ie1d41f1f0845edf495cdf34ca65466fc307940c6 Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
2016-04-13Create macro for next_nodes used in lookup family of nodesDamjan Marion6-168/+44
This should help when adding new adjacency types Change-Id: I1832c6b7a80b6bc69ed83423a60511b7932f336f Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-12Added a LICENSE fileEd Warnicke1-0/+202
Change-Id: Iba5dbd74baf18e07a986d30ee67fcff334f5f206 Signed-off-by: Ed Warnicke <eaw@cisco.com>
2016-04-12Porting 2 dpdk patches to dpdk 16.04 patchesTodd Foggoa2-0/+106
Change-Id: If298d0ba4941b3c8ccec3b407080661b4a06ac5b Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-12Creating a new CLI to create loopback interfaces to make the interfaceAlpesh Patel1-0/+6
creation cli consistent Change-Id: I72f074bb8c771511cb5203af6905adccefbb4197 Signed-off-by: Alpesh Patel <apatel9191@hotmail.com>
2016-04-12IP6 FIB: Micro optimization in lookupPierre Pfister1-4/+9
The mask is increasingly small. This saves a few cycles and becomes significant when there are many prefix lengths. Change-Id: Ibd0c9331f675697bb4e90e8ad617994f83edec9c Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-04-12Add support for DPDK 16.04 release, rebase some of 2.2.0 patchesDamjan Marion7-1/+318
Change-Id: I08292ba39dc6012c2edbcdaed0b02a8ebe07aec4 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-04-12Add unit test infrastructure for LISP protocolFilip Tehlar13-36/+649
Change-Id: I802700ad832de1dc6f4a1981e8985aa6e926c8ad Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-04-12Add counter for the number of barrier syncs performed.Bud Grise2-0/+3
Change-Id: I42b26c8f95c17577006f13e3419b8ccc9ef7c4f3 Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-12Add a configurable "significant error" metricDave Barach5-16/+163
Change-Id: Idda59272a029ffcbc029f9bb167508d7bd5e6e21 Signed-off-by: Dave Barach <dave@barachs.net>
2016-04-11vagrant: libvirt configuration.Jeff Shaw1-2/+6
Configure the proxy, vcpu, and memory parameters for the libvirt provider. Change-Id: Id662e60f76b4b424d3a5d98929a44ef2587ef258 Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
2016-04-11Add a counter for unknown IPv6 hop-by-hop options.Yoann Desmouceaux1-2/+9
Change-Id: I3db82b71ae5e32e0f2230662497a05e57ddb6755 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-04-11Fix possible infinite loop in IPv6 hop-by-hop header parsingYoann Desmouceaux1-0/+6
Unknown hop-by-hop options are currently not processed, which triggers an infinite loop due to the pointer not advancing further in the header. Change-Id: Idf9176090e042b17aac1baa25a6cb4beb8c199d8 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-04-11Propagate the VLIB_FRAME_NO_FREE_AFTER_DISPATCH flag to cloned next_framesBud Grise1-0/+6
Without this, frames can be double-freed to nodes like "error-punt", leading to buffer leaks and other problems. Change-Id: Ie28a4f504254ee439f720dbaac7f12206cea753b Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
2016-04-11Add vnet_rename_interface APISean Hope2-0/+41
Change-Id: I9a8e1ed310aa9a72644540856426c77f61f4b4bb Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>