Age | Commit message (Collapse) | Author | Files | Lines |
|
This feature enables the use of the classifier and ip-in-out-acl nodes
to redirect matching sessions via arbitrary fib paths instead of relying
on additional VRFs.
Type: feature
Change-Id: Ia59d35481c2555aec96c806b62bf29671abb295a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: I9971e69135e0652a36e4b4754774a43ea1d92e8b
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: Ib0ca3379439d6ee23e696f8f0840e6ddf42430b8
|
|
Type: fix
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Change-Id: Ie3f390be16df81f6824344034377f9a6f4fa9f92
|
|
format_hexdump currently requires the length parameter to be uword
(64-bits) hence all callers must make sure to cast the length to uword.
Use u32 instead to benefit from C automatic integer promotion: any
length smaller or equal to u32 will be promoted to int fitting in u32).
Only callers using a length of u64 needs to downcast.
It also makes it similar to other variants.
Type: fix
Change-Id: I09b52fdde3970cec0be4150a29126ff63106c75b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
This caused that failed to create flow rule with rss types.
Type: fix
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I77696286a32804cbe884075cb027eec19eb5c7cb
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
|
|
Add the missing AArch64 support for printing program counter.
Type: improvement
Signed-off-by: Tianyu Li <tianyu.li@arm.com>
Change-Id: Idb63737ed72e10fa29fd61e1eab5af059e2b8e28
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8d3a1939870601297ecccf4cda6767510c2abfa5
|
|
In some cases with Generic FLow, it is only required to show the pattern
of spec and mask, but no need to add the flow. Therefore, add an option
in packetforge so that users can show spec and mask only.
Type: improvement
Signed-off-by: Ting Xu <ting.xu@intel.com>
Change-Id: I7b3040689eb82d0b58924712ee6fc9cfa0a42fa1
|
|
Print fib-index, next node index and opaque.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id2ff265c9acffc75f8b04fb9f26c6d571fc2ef98
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic28da52b9c8286f71e472ef6c3afc23d464f85b0
|
|
Prior to dpdk-22.11, VPP can count on rte_eth_dev_socket_id to return
numa node 0 if the device didn't set it. Ever since below patch is
committed in dpdk
https://patchwork.dpdk.org/project/dpdk/patch/20220929120512.480-1-olivier.matz@6wind.com/#152498
the aforementioned assumption is no longer true. If the device didn't
set the numa node, VPP gets -1 from the aforementioned API call. This
causes VPP to crash.
This fix is to set the numa node to 0 if the API returns -1, or SOCKET_ID_ANY
Type: fix
Change-Id: I2fde2870e5a3eb98473fe8d119fef594bfba9a8d
Signed-off-by: Steven Luong <sluong@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ife5f72dc9587c9f6b8aa513cd039fa28bb22fca3
|
|
Move GRE folder under vnet to the plugin folder, and modify some of path
of the #inlude<header> to the new path.
Add a plugin.c file to register a plugin.
JIRA: VPP-2044
Type: improvement
Change-Id: I7f64cecd97538a7492e56a41558dab58281a9fa5
Signed-off-by: Chuhao Tang <nicotang@cisco.com>
|
|
In some cases an .api file may contain only counter definitions.
If so do not generate the setup_msg functions.
Type: improvement
Change-Id: Idf89a7a5ab135428e9577726bc356acfd7c30113
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
- remove non-inclusive language in message and improve
clarity of the error message
Type: style
Change-Id: I3f4895d6a502c2583a8b6b3c325a3f30ced03f84
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
- Update rdma-core library to 45.0 to work with DPDK 23.03
Type: feature
Change-Id: I6bd54c509b93de905e1b0194dce414e4a6e11990
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This patch bumps DPDK version from 22.11 to 23.03.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I10203a6408ceb5a40fe392924130652b91ebc993
|
|
This patch prepares code for bumping DPDK version to 23.03, but the DPDK version of this patch keeps at 22.11 for compatibility.
the "no-dsa" parameter in DPDK configuration is removed, the "blacklist" parameter can be used to block the related DSA devices.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I589afba165e85138437e731531414a033f64f8d3
|
|
Type: fix
Change-Id: I23ef347adc97d7d806acf98c3dcdbe80f2a03441
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Make sure half-open table is cleaned up on close and cleanup of
half-open.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id7ad177f364d6395f7379dc927e449a40547510e
|
|
Update rdma-core library to 43.0 to work with DPDK 22.11.
Type: feature
Change-Id: Iad8bb9c7745dd5bc5f8c0935a31362fd92447ff6
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2d1976cb8061534a7e93d4dd2283abaf70a33f7c
|
|
After the clib_socket_init syntax changed, the behavior of VCL
socket creation was broken. This patch introduces app_namespace_add_del_v4
to address the behavioral change.
Type: refactor
Change-Id: Ice016bdb372233fd3317f166d45625e086e9b4df
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
This change is part of VPP API cleanup initiative.
Type: refactor
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I9f0f786b50aa77383b16e0f844c85f236f7aa8d0
|
|
This patch bumps DPDK version from 22.07 to 22.11.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I82df2c0678e1cc1b3739a5b0677f0c4a4180a489
|
|
Type: make
Change-Id: I8983778b4c2f5123b27aeeb1fdc4721c8e9c9160
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I55731fa546df01ac4bd327b444ac1a5c2052bed1
|
|
A plugin can set "VAT_AUTO_TEST_ OFF" to disable building of the autogenerated
Type: improvement
Change-Id: I856fbfd83bbc5c7df0759e550b20ac75df77d9d7
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
traceroute sends 3 packets rapidly that triggers and depends on ICMP error
generation. The current ICMP4 throttle setting at 1-e3 throttles the last
ICMP error and makes traceroute sit in a timeout.
Type: fix
Change-Id: Ie886303600ad0374dcb6ae311e949154727a93d2
Signed-off-by: Ole Troan <otroan@employees.org>
|
|
Type: fix
Currently sw_scheduler runs interchangeably over queues of one selected
type either ENCRYPT or DECRYPT. Then switches the type for the next run.
This works fine in polling mode as missed frames get processed on the
next run. In interrupt mode if all of the workers miss a frame on the
first run the interrupt flag is lowered so the frame remains pending in
queues waiting for another crypto event to raise the interrupt.
With this fix force sw_scheduler in interrupt mode check the second half
of the queues if the first pass returned no results. This guarantees a
pending frame gets into processing before interrupt is reset.
Change-Id: I7e91d125702336eba72c6a3abaeabcae010d396a
Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com>
|
|
This patch add in missing src/dst port assignment in SA for udp port
if encap.
Type: fix
Signed-off-by: Gabriel Oginski <gabrielx.oginski@intel.com>
Change-Id: I84219c016c5a32590aba0371c01ad8d44cbf4c5c
|
|
Fix corner case when a test would be skipped if it was not possible to
start it due to insufficient cpus available in the middle of the loop.
Type: fix
Change-Id: Ie4580685ff55688375d649d7009131d9fe1e4f33
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
Type: improvement
Change-Id: Ib7703359b998456bff88caee88c2734c7724bc09
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
Support multiple comma-delimited filter expressions,
e.g. to run both bfd and ip4 tests, it's now possible to do:
make test TEST=bfd,ip4
Same goes for wildcards, e.g.:
make test TEST=bfd,..test_longest_prefix_match,..test_icmp_error
Type: improvement
Change-Id: I0cceaa443cb612dca955f301c7407959f9a71a6e
Signed-off-by: Klement Sekera <klement.sekera@gmail.com>
|
|
This change is part of VPP API cleanup initiative.
Type: refactor
Signed-off-by: Ondrej Fabry <ofabry@cisco.com>
Change-Id: I26d13a697c9b70a75555c04e925e9d6aaf7ed755
|
|
When trying to start perfmon with a bundle that has a unique type while
specifying that type as argument, the command fails
(e.g. perfmon start bundle branch-mispred type node).
This error occurs because the returned value of
unformat_perfmon_active_type is actually a perfmon_bundle_type_t, but
it was treated as a perfmon_bundle_type_flag_t by a test in the CLI
function.
However, this test is useless and thus can just be removed.
Type: fix
Signed-off-by: Maxime Peim <mpeim@cisco.com>
Change-Id: I5d8b9815871621e8ee7b935586f4cedbc0e7a53d
|
|
Introduce async model into memif by utilizing new DMA API. Original
process is broken down to submission stage and completion stage. As
multiple submissions may in flight simultaneously, per thread data is
no longer safe, now replace thread data into each dma data structure.
As slave side already support zero copy mode, DMA option is only added
in master side.
Type: feature
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Change-Id: I084f253866f5127cdc73b9a08c8ce73b091488f3
|
|
This patch prepares code for bumping DPDK version to 22.11, but the DPDK version of this patch keeps at 22.07 for compatibility.
the "no-dsa" parameter in DPDK configuration is removed, the "blacklist" parameter can be used to block the related DSA devices.
Type: feature
Signed-off-by: Xinyao Cai <xinyao.cai@intel.com>
Change-Id: I08787c6584bba66383fc0a784963f33171196910
|
|
Type: fix
Signed-off-by: Koki Kiriyama <kiriyama.kk@gmail.com>
Change-Id: I47c4c91aa6f973bd93dca352f470642e90aa70e0
|
|
Apache ab sometimes fails during extensive performace testing.
This patch makes sure hs-test perf tests always pass.
Type: test
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: I0921682f0f07df3af45b342b9a7ddfa1af037ceb
|
|
Type: improvement
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ib188f3331696dff6357a18f5bac5f1db3cefaeab
|
|
Set the mask of calculating the next cqe index to the corresponding CQ
size instead of rxq size.
Type: fix
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
Change-Id: I67494f029967af64051f51452eba1fd699984cd9
|
|
Type: style
Change-Id: I969bc72185d3675a35cf227c60bedca20e09fdf5
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I8519bcd76a0ade2f24b62bf69f6a103379639cb7
|
|
With 'api-trace { on }' in startup.conf, running 'api trace dump' in
vppctl was causing VPP to seg fault. vl_msg_print_trace() was calling
m->endian_handler() without checking whether its null.
Checking if its non-null prevents a crash, but the trace dump prints
the message IDs for trace_plugin_msg_ids in network byte order. There is
an auto-generated endian function for that message. Set it on the call
to vl_msg_api_config() for trace_plugin_msg_ids so the IDs will be
printed in host byte order in trace dump output.
Type: fix
Fixes: fe45f8f5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
Change-Id: I0ab463985e9a983155feba13ac4eb99ab883ace6
|
|
Type: fix
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Id4ca9a749a343c55b24f6eb4b5eb0909a57e0c23
|
|
Type: fix
Signed-off-by: Xiaoming Jiang <jiangxiaoming@outlook.com>
Change-Id: Iaa3ad87d56163396476bcaaa34e52948b9032f4e
|
|
Previously, .src_ip_sticky may have been left uninitialized.
Type: fix
Fixes: 613e6dc0bf928def5d337312d522e1a15df87b00
Change-Id: Ifd866d6322fe9ff723f92b7ab3fd77e720a3cfa4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
To make out of tree plugins require a particular version, they need
access to the version they are built with. Install version.h.
Type: fix
Change-Id: I5916d0a16aed7e054ede452af956fee56cd078f0
Signed-off-by: Ole Troan <ot@cisco.com>
|