summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-09-04cnat: fix snat ip v6 testsMathiasRaoul1-6/+6
Type: fix Change-Id: I9e102e0028274cc084e59c106d1cd4be174b1205 Signed-off-by: MathiasRaoul <mathias.raoul@gmail.com>
2020-09-04virtio: remove kernel virtio header dependenciesMohsin Kazmi18-394/+483
Type: refactor tap, virtio and vhost use virtio/vhost header files from linux kernel. Different features are supported on different kernel versions, making it difficult to use those in VPP. This patch removes virtio/vhost based header dependencies to local header files. Change-Id: I064a8adb5cd9753c986b6f224bb075200b3856af Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-09-04vrrp: improve RFC compliance for ARP/NDMatthew Smith2-38/+48
Type: fix The ARP/ND feature nodes reply to requests for a VR virtual IP address when a VR is in the master state. If the VR is in the backup state, the request is passed to the next node on the feature arc. This can cause an incorrect response to be sent. If some other feature (e.g. NAT) causes a virtual IP address to be configured as a "local" address on the system, a later node on the feature arc may respond to an ARP/ND request with the real MAC address of the interface. RFC 5798 says that a router must respond to ARP/ND requests for VR virtual IP addresses with the VR virtual MAC address. And it says a router must not respond to ARP/ND requests for VR virtual IP addresses when the VR is in the backup state. Ensure that ARP/ND requests for VR virtual IP addresses are dropped when in the backup state rather than allowing them to continue on the feature arc where another node may end up responding. In order to do this, enable/disable the feature nodes when leaving or entering the init state instead of the master state. Change-Id: I416f83e125cbf91deb90c3b6eb00ba3207de24ad Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-09-04buffers: improve cache occupancyDamjan Marion1-2/+8
Adjust buffer allocation so it always have odd number of cache lines. That should result in better distribution of cachelines among cache sets. Type: improvement Change-Id: I0d39d4cf01cff36ad6f70a700730823a96448c22 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-04dpdk-ipsec: use init function instead of one-time processChristian Hopps1-11/+3
Use VLIB_MAIN_LOOP_ENTER_FUNCTION to do post init initialization for dpdk crypto rather than create a one-time process to do the same. Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: I06e480b028c8e1fc1b0024a66b2338eb21a797ca
2020-09-04vpp: Fix node APIsNathan Skrzypczak2-5/+5
Type: fix Change-Id: Ic6e2b7e05b50945a8e2222019c2942a6ee52e465 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-09-04dpdk-ipsec: fix show outputChristian Hopps3-3/+3
Fix the shown crypto inflight counts which were reversed. Also improve a couple error descriptions to tell them apart when viewed. Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: I6d4054c64aa842658cfcde8969c7aa48f6d21207
2020-09-04ipsec: fix trace of GRE_teb packetsChristian Hopps1-2/+5
The issue is not easily hit. When GRE_teb packets are received the post crypto processing adjusts the l2.l2_len value in the vnet_buffer opaque data. This is overwriting the ipsec opaque data. Later the trace code fetches the sa_index from the ipsec opaque data. It's just an accident that this currently works, if the ipsec data is changed so that the sa_index moves around it will be overwritten by the l2_len modification. Indeed, this was found b/c local development changes had moved the sa_index so it was over-lapping with the l2_len memory space, and the UT failed. Type: fix Change-Id: Iaecfa750cf0b36653fd9e75b4d799f323a14d932 Signed-off-by: Christian Hopps <chopps@labn.net>
2020-09-04ipsec: cli: add missing flags for SA addChristian Hopps1-0/+12
Add missing cli options for setting IPsec SA flags, inbound, use-anti-replay, and use-esn. Type: fix Change-Id: Ia7a91b4b0a12be9e4dd0e684be3e04d8ccafb9d4 Signed-off-by: Christian Hopps <chopps@labn.net>
2020-09-04ip: enhance vtep4_check of tunnel by vector wayZhiyong Yang6-48/+173
This patch aims to improve decap performance by reducing expensive hash_get callings as less as possible using AVX512 on XEON. e.g. vxlan, vxlan_gpe, geneve, gtpu. For the existing code, if vtep4 of the current packet match the last vtep4_key_t well, expensive hash computation can be avoided and the code returns directly. This patch improves tunnel decap multiple flows case greatly by leveraging 512bit vector register on XEON accommodating 8 vtep4_keys. It enhances the possiblity of avoiding unnecessary hash computing once hash key of the current packet hits any one of 8 in the 512bit cache. The oldest element in vtep4_cache_t is updated in round-robin order. vlib_get_buffers is also leveraged in the meanwhile. Type: improvement Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Signed-off-by: Junfeng Wang <drenfong.wang@intel.com> Change-Id: I313103202bd76f2dd638cd942554721b37ddad60
2020-09-03api: fix ipsec custom_dump functionChristian Hopps1-8/+5
The protocol value was changed to 50 and 51 (rather than 0 and 1), but the custom_dump function wasn't updated to reflect this. Also the is_add value wasn't being shown. Fix both these issues. Type: fix Change-Id: I429b4616d6c7937f73308b644154370fab32eaae Signed-off-by: Christian Hopps <chopps@labn.net>
2020-09-03misc: l2tp: cli: fix overly generic CLI commandsChristian Hopps1-2/+2
"clear counters" is not appropriate for a protocol to own. Change to "clear l2tp counters" (and "test l2tp counter"). Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: I3faac3907c4697c1c95df34ac7d31e48063869a8
2020-09-03vlib: exit 0 (nocore) on SIGHUPChristian Hopps1-2/+2
Scenarios where SIGHUP is sent would include the user closing an xterm while in interactive/nodaemon mode, or similarly when running vpp in the same mode during testing (e.g., using ssh to run VPP on a DUT). VPP should exit in these cases; however, generating a core is unwanted. Type: fix Signed-off-by: Christian Hopps <chopps@labn.net> Change-Id: Ibccfe5e676547e913c8a205ff16ab56d9abb1c82
2020-09-03crypto: Add async crypto APIsNathan Skrzypczak11-5/+307
Type: feature This adds api calls for the following CLIs: * set sw_scheuduler worker <N> crypto on|off * set crypto async dispatch polling|interrupt * set crypto handler * set crypto async handler Change-Id: Ic701d149c440e42ea4575da42b9f69e4c8759602 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-09-03crypto: SW scheduler async crypto enginePiotrX Kleski8-71/+1027
Type: feature This patch adds new sw_scheduler async crypto engine. The engine transforms async frames info sync crypto ops and delegates them to active sync engines. With the patch it is possible to increase the single worker crypto throughput by offloading the crypto workload to multiple workers. By default all workers in the system will attend the crypto workload processing. However a worker's available cycles are limited. To avail more cycles to one worker to process other workload (e.g. the worker core that handles the RX/TX and IPSec stack processing), a useful cli command is added to remove itself (or add it back later) from the heavy crypto workload but only let other workers to process the crypto. The command is: - set sw_scheduler worker <idx> crypto <on|off> It also adds new interrupt mode to async crypto dispatch node. This mode signals the node when new frames are enqueued as opposed to polling mode that continuously calls dispatch node. New cli commands: - set crypto async dispatch [polling|interrupt] - show crypto async status (displays mode and nodes' states) Signed-off-by: PiotrX Kleski <piotrx.kleski@intel.com> Signed-off-by: DariuszX Kazimierski <dariuszx.kazimierski@intel.com> Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com> Change-Id: I332655f347bb9e3bc9c64166e86e393e911bdb39
2020-09-02vcl: handle svm fifo write failureFlorin Coras1-1/+3
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I4b132cad8ff906ef24846cc43935ccfd6aa7b4ec
2020-09-02tcp: fix connection refused errorFlorin Coras1-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I436741e061f11685980a71fb3989befc7af1e081
2020-09-02nat: twice-nat static mapping pool addressFilip Varga10-95/+354
Let twice-nat static mapping pick specific address from the twice-nat pool. Type: improvement Change-Id: Iadaa036af2fa3b0e6e9a68ff6e68b4bbe1650eb1 Signed-off-by: Filip Varga <fivarga@cisco.com>
2020-09-02fib: IPv6 lookup data structure MP safe when prefixes changeNeale Ranns4-15/+84
Type: fix adding routes should be MP safe. When new prefixes with differrent prefix lengths are added, adjust the sorted list in an MP safe way. Change-Id: Ib73a3c84d01eb86d17f8e79ea2bd2505dd9afb3d Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-09-02fib: fix ADJ_NBR_ITF_OK param erroryedg1-1/+1
Type: fix Signed-off-by: yedonggang <yedg@wangsu.com> Change-Id: I3bf67070ed01df40626f3b90f2762158b6c3ce05
2020-09-02bonding: add bond_create2 API to include gso optionSteven Luong6-20/+234
gso option is available for the debug CLI version of bond create. This patch is to create a new API to have the corresponding option in the binary API. The old binary API bond_create is marked deprecated. Type: improvement Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Id9501b8e6d267ae09e2b411957f181343da459c0
2020-09-02session: fix non-blocking msg enqueue to vpp mqFlorin Coras1-1/+2
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I7228a01d38e61cc00358419b2512ca0da4f76ff5
2020-09-02ipsec: add ipsec set async mode apiYulong Pei2-1/+26
Type: improvement Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I841f4407ed8c1a448e5102059fc79ae1f7d461de
2020-09-02misc: fix pcap [rx|tx|drop] filename stem overflowBenoît Ganne1-1/+1
Type: fix Change-Id: I2b6b7b6f28cbf7accf883743e390b0031dd13bbb Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-09-02tap: add the static assert for api flagsMohsin Kazmi1-0/+19
Type: improvement Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: Ia1276d00dded36ee28b4b2e93b4cc7c1df6b1eef
2020-09-02virtio: add virtio 1.1 api flagsMohsin Kazmi5-12/+199
Type: feature Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I95d7fc1cc8db5199570c66535f45e867a7cae676
2020-09-02build: Fix 'make build VPP_EXTRA_CMAKE_ARGS=-DVPP_ENABLE_SANITIZE_ADDR=ON' ↵jiangxiaoming1-2/+2
error on Centos 7 Type: fix Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com> Change-Id: Ic47f5e8627923c951333c70004850b53ed4cab06
2020-09-02tap: add virtio 1.1 API flagMohsin Kazmi5-3/+19
Type: feature Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I3e00deb94943c545d1649865b2efdf7d51b90f4d
2020-09-01crypto-openssl: add chacha20-poly1305 to crypto-opensslArtem Glazychev3-9/+223
Type: feature Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: Iec28fb11b6edff1bee23117f56aa3a3e5729541a Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-09-01virtio: fix the bar starting indexMohsin Kazmi1-1/+1
Type: fix Change-Id: Ia28161b583ea26ab820a494332a79b64add7004d Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-09-01virtio: fix the NULL deferenceMohsin Kazmi1-1/+2
Type: fix Change-Id: I8d55c2bfdd3c4607044370ebabf40cbac78b4996 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-09-01virtio: fix the error returnMohsin Kazmi1-9/+12
Type: fix Change-Id: I12b08333f3f69aaa882e8801f4f69bca2d7bd558 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2020-09-01misc: fix uninitialized use warnings with gcc-{8,9}Aloys Augustin2-3/+3
Change-Id: I4930c3c2a8025ec9ceb17e994137be67d88d455f Type: fix Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
2020-09-01vppapigen: supports backwards compatible marking of enumsOle Troan1-18/+38
enum bar_enum { BAR1 = 0, BAR2, BAR3 [backwards_compatible], BAR4 = 9 [backwards_compatible], }; This allows adding backwards compatible (as guaranteed by the developer) enums. The enums marked backwards compatible are not considered in the CRC calculation. Type: improvement Change-Id: I6fc0c21b19e1a02cff7f5d279a0f3a32d2f8b630 Signed-off-by: Ole Troan <ot@cisco.com>
2020-09-01crypto: add chacha20-poly1305 algoArtem Glazychev1-2/+5
Type: feature Signed-off-by: Artem Glazychev <artem.glazychev@xored.com> Change-Id: I3697cf7fab7abb7c3d2f61ef326c9116bc1eed66
2020-09-01ip: fix ip zero checksum verificationBenoît Ganne10-19/+20
In one's complement, there are two representations of zero: the all zero and the all one bit values, often referred to as +0 and -0. See RFC 1624 section 3 for more details. This used to be taken care of in ip4_header_checksum(), but it is no longer the case. The check ip->checksum == ip4_header_checksum (ip) is no longer correct in the -0 case. Always use ip4_header_checksum_is_valid() instead (which behaves correctly since 9a79a1ab931c3b5a7ae07d6f0fcfef7c4368a2c4). Type: fix Fixes: e5f0050c7a5d411f96af6401797529d58825e2af Change-Id: Iacc6b60645a834287b085aecb9e3fdb4554cf0cf Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-09-01dpdk: fix mac address length was wrongjiangxiaoming1-1/+1
Type: fix Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com> Change-Id: I87c6f423ea8fdd9fb764693055eb1509f994d6f1
2020-09-01fib: detect wrong adj neighbour bugsBenoît Ganne1-0/+23
Type: improvement Change-Id: Ie063ee0a0c59a9ad632200ce2b23703bc0d936e6 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-09-01mpls: fix adjacencies walk in case of restackBenoît Ganne1-1/+1
Adjacencies are only defined for IPv4 and IPv6. Type: fix Fixes: 20aec3db441074ee5a861a40d6e02fad2f3dcb37 Change-Id: I19b2b7f6958da49f41c6eabc9f248840769acbbb Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-09-01vppinfra: Fix bihash coverity warningNathan Skrzypczak1-2/+2
Type: fix Hitting a code not reachable when setting BIHASH_KVP_AT_BUCKET_LEVEL = 1 Change-Id: I24d539df67ae7650a3b1969f5709a6f7366d786b Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-09-01cnat: Fix typo in ts handlingNathan Skrzypczak1-1/+0
Type: fix Change-Id: I5287f6326726780c09e515eede0992bafb413bb2 Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
2020-09-01ip: improve ip4_header_checksum_is_validDamjan Marion1-5/+12
It is cheaper to include checksum field in calculation and simply compare result with zero. Type: improvement Change-Id: I6f77632c0a4d2f2c632d044d3a5d2fcf2b5bac62 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-08-31nat: fix type in api messageKlement Sekera4-2/+204
Translation memory size is internally a uword, but in api it was u32, resulting in the returned value being 0 all the time. Fix the "incorrect" API reply to return a u32 capped to 0xffffffff if the u64 is larger than that, introduce the message with the correct type, deprecate the message with the incorrect type. Also, while we are updating the message definition, add the max translations / max users per worker thread into the new message. Type: fix Signed-off-by: Klement Sekera <ksekera@cisco.com> Change-Id: I92e38a6a2bcb70fc8d1b129bbe416bf7f9e54280 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2020-08-31vlib: extend telnet protocol guardVladimir Isaev1-1/+1
There is a number of TERMs with big length, such as 'screen.konsole-256color' (23). These TERMs can not be processed properly by vpp because maximum telnet byte stream supported is 24 and we need 6 more service bytes to send TTYPE. So I extended maximum depth guard to 32. Type: fix Signed-off-by: Vladimir Isaev <visaev@netgate.com> Change-Id: I9ca506996a97e9567d06483c5f020d6cc394329c
2020-08-31vppinfra: convert A_extend_to_B to B_from_A format of vector inlinesDamjan Marion6-22/+22
Make it shorter and same format when converting to biggor or smaller types. Type: refactor Change-Id: I443d67e18ae65d779b4d9a0dce5406f7d9f0e4ac Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-08-31vpp_config: update node variants to skx and iclRay Kinsella2-4/+4
Node variant names have changed to skx and icl. Type: fix Signed-off-by: Ray Kinsella <mdr@ashroe.eu> Change-Id: I5be832aa59e4e440df53869077d801c011e3defa
2020-08-31ip: fix compiling error with gcc-10Jieqiang Wang1-0/+12
Building VPP using gcc-10 fails because of the array bounds check error for function ip4_header_checksum(), with option field in IPv4 header exceeding the ip4_header_t bound. Fix this error by turning off the array bounds check option for function ip4_header_checksum(). Change-Id: I68cc241ae9e403d35ac2e320549506dc6565a0b6 Type: fix Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
2020-08-31af_xdp: AF_XDP input pluginBenoît Ganne20-1/+2375
Type: feature Change-Id: I85aa4ad6b68c1aa0e51938002dc691a4b11c545c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-08-31rdma: bugfix in the descriptor refill logic. In case of a partial ↵Mohammed Hawari1-1/+1
allocation, the remainder modulo 8 must be returned to the pool so that the number of kept buffers is a multiple of 8. Type: fix Change-Id: Ifd97b03ea220300e7e6fe81a8ff4a25060fea6c1 Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
2020-08-31session: format app_ns_name with %v rather than %sjiangxiaoming1-1/+1
Type: fix Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com> Change-Id: Ie29dec803aa4ee02755190b09573c23f9b5f0ada