Age | Commit message (Collapse) | Author | Files | Lines |
|
It is more appropriate to use log_debug instead of log_warn when inoking
clib_file_add and clib_file_del.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I544d97037cfca3f22ce94242aef0c7b0fea2fa9b
|
|
Need to add msg_id_base with VL_API_AVF_DELETE to properly set the
correct is_mp_safe variable.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I20f6e9441727fb7ffc132965b93c0a90482e1a52
|
|
When deleting an avf interface which is not the very first interface
that was created (dev_instance == 0), VPP crashes.
The reason is every avf interface delete always removes the very first
device instance due to ad->dev_instance was wiped out prior to the
statement pool_put_index (am->devices, ad->dev_instance)
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I69bd1588aab9a176f8eef46be7aa5063f5d29482
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I07920a61e64cf1556c6b795d573cbd6a74675c1c
|
|
Type: make
Change-Id: I47cf68ecd546cad05732a572579569594f96a1ff
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic1d88c01e48bb926932030c3c5a03f35e345e9eb
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Id2c06f49bcae1a26a2d16d58f9da7a4d3175bf3c
|
|
The crypto op flags must be reset to frame flags minus invalid values
depending of the operation, instead of forcing them to specific values.
Type: fix
Change-Id: Ib02c2a738bbca6962394b3c03088d516d0da56a0
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Improve the code by removing another kind of wrappers.
Type: improvement
Change-Id: I5292ef6c1761e3c6c2edd15f2aa625dac26c3732
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Experimental support for session layer interrupt mode. When enabled
(use-private-rx-mqs must be set) session queue node switches to
interrupt state when lightly loaded, i.e., no events and less than 1
vector/dispatch.
Because transport protocols require a periodic time update, when in
interrupt state the session queue node workers register a timerfd with
the unix-epoll-input node that when triggered signals, i.e., wakes up,
the queue node. Under light load, the timer is set to trigger every 1ms
whereas if no session is allocated, the worker moves to idle state and
the timeout is set to 100ms.
Type: feature
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I905b00777fbc025faf9c4074fce4c516cd139387
|
|
Initialize the local variables as to prevent first fall
through one by one processing; skip prefetching rather
than doing one by one when count below 12.
Type: improvement
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Change-Id: If02935da081e24f7cfe408811ccf6922cf982092
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I998c0686f9f7dc556dda8b28e23bbed127d0aafc
|
|
Patch 24601 introduced description into template. In vhost_user_process,
template is reused inside the while loop to call clib_file_add. But
description is allocated outside of the loop only once. As a result, the
same storage for description is being referenced by all instances of call
to clib_file_add. As long as we don't call clib_file_del, we may be
good with multiple fds sharing the same storage for the description. When
one of the fds disconnects and frees the description, the other fds is
holding onto the free memory pointer. Bad news eventually happens when
another fd disconnects and frees the description that was already free
previously.
The fix is to move the allocation of description inside the loop to avoid
sharing.
Type: fix
Fixes: gerrit.fd.io/r/c/vpp/+/24601
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ie670931acdc2c7b851982d98fd0d837284a19036
|
|
coverity is trying to outsmart human by guessing on COPY_PASTE_ERROR.
Have it your way.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I0239c9745e21384aebbaf9e977962746b81ded58
|
|
The session db (bihash_40_56_t) was inheriting BIHASH_USE_HEAP=1 from
vppinfra/bihash_24_8.h through a convoluted set of #includes. Set
BIHASH_USE_HEAP in cnat_bihash.h, to avoid a surprise long after
anyone remembers the story.
Type: improvement
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I8aa3be09b306fc99ba0b6baa5096a0a6829a8951
|
|
Type: fix
The fib source IP6_ND is used for all link-local entries, hence
solicitation responses were sent for a peer's address. Constrain the
source check to also in clude the LOCAL flag, which indicates that the
link-local address is ours.
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Iba7e66049e4d89ee3f36d77aeb09310b978d70de
|
|
This avoids chunk allocation/collection deadlocks if either of the sides
crashes.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I98619e6e035fa8688889ca34db2143c8898732df
|
|
Type: improvement
Change-Id: I260580cf2d32ff949f44d80c764937ee6102486c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add linux similar arping command to VPP.
syntax: arping [gratuitous] <address> <interface> [repeat <count>] [interval <secs>]
Type: feature
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I9267c054235207b8fae8e3f159246777eb0340dd
|
|
Replace clib_warning with vlog_log_debug when sending garp. There is nothing
to alert/warn the operator about sending garp. vlib_log is more appropriate.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ib88a2b46d2ab8b3c35162538ead0dd0983fb7093
|
|
Type: make
Change-Id: I20e1509092e79a91cc015b932a06af4b466bfc84
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This change allows one to inject multiple streams for different workers
on the same PG interface at the same time.
Type: improvement
Change-Id: I29d80369aabada261eda466e5a5d8d3518bb8bc8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I47b5b1ad693d131cfc332f6942c86967687a3f2b
|
|
Type: fix
Change-Id: I9bb19a5c9b5b48825f19a4ac124a3628ceaa081d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fix ordering of feature nodes so that ACL runs after NAT in in2out
direction so it can properly track stuff like ports after NAT rewrite.
Type: fix
Change-Id: I2c689b64765628e9bc77108914f74c6c801d8ce2
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Original set, start, stop, reset, show etc interface was somewhat cumbersome, we
can improve slightly by combining set and start.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I7b865b2c29d2ab32adbd24d7f8a580da6990bb76
|
|
Type: feature
Add output of field maximum reassembly length with others
ip reassembly configuration fields. This field can be configured
via vpp API, but there was no output of this field in vpp cli.
Output added for ipv4/ipv6 and full/shallow virtual nodes.
Signed-off-by: Anton Nikolaev <anikolaev@netgate.com>
Change-Id: Ibbd61aab26189d4a93d32e047d8f4e589fe9f8a5
|
|
Need to add msg_id_base to the index
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Id7ebf168502e8fd811d8f2f0c5538e69e23242fb
|
|
Show % time spent per graph node in power level 0, 1 and 2.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I678ee812fa993af39568e9f9dfbf2396fc13ad42
|
|
Update of DPDK to latest stable release.
As this introduces new build dependency, it also adds install
of pyelftools to the build step. (note however that flush of pip downloads
cache dir is required)
https://doc.dpdk.org/guides-21.02/rel_notes/release_21_02.html
Type: improvement
Signed-off-by: Kepka, Krzysztof <krzysztof.kepka@intel.com>
Change-Id: I7ed2ca965f01c1062f5abc25ea428e8c1a016366
|
|
Type: refactor
It's only the nodes that require compiling for each arch,
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: Ibb2bfc756001735cc10ef0fd8db7e8b8358cf8e2
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I4a5d52d54aa2748008e896888bfeabb18a1088bb
|
|
The crypto op data offset passed into DPDK is relative to the mbuf
buffer address plus the mbuf data offset, therefore the mbuf data
offset needs to be set rather than left at whatever previous value it
was at, which is likely to be incorrect and result in the wrong
portion of the packet being encrypted/decrypted for GCM.
The fe->crypto_start_offset field is relative to the start of the vlib
buffer (as opposed to the current data pointer), so set the mbuf
data_off field to VLIB_BUFFER_PRE_DATA_SIZE when performing a GCM
crypto op enqueue to match the crypto_start_offset semantics. This
then matches the behaviour in the non-GCM case.
Type: fix
Change-Id: I0ac2a44139387158765a3e04cfcaa5ee6f11d395
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
|
|
Type: fix
Change-Id: I170f9d8c685f59b7ccf6f9ee7fdc1dcdf2a54fe1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: improvement
Change-Id: If35b40168414807e928cb3026633ae9d2fa703ed
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Add branches, branches taken (a meteric for branchy code), and branch
misses.
Type: improvement
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: If92d4aaf9d0a6e3b99b8c19e6311cc08ca470590
|
|
Type: feature
Change-Id: Ibfc412200ef5932fa40423075967df6d9156f3ed
Signed-off-by: Francois Clad <fclad@cisco.com>
|
|
Use actual thread index from hash table instead of doing calculation.
Calculated index might be different and could lead to crash.
Type: fix
Change-Id: Iede9a67fbe541cb44eccd0d6ddf4e2c51eb35423
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ibbb72e77c751b7e775620cfb160b52ceff2da86b
|
|
Type: fix
Coverity scan issue fix.
Change-Id: I9036fade15fd381da9c1e6b575f250fdcb21f876
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
Type: improvement
Adding support for enable&disable calls
(dynamic plugin configuration).
API (nat66_plugin_enable_disable) and
CLI (nat66 plugin enable/nat66 plugin disable) with support for
outside_vrf id configuration.
Change-Id: I5637ff1621d6662adc3b7c6f7f8176d84a4b492b
Signed-off-by: Filip Varga <fivarga@cisco.com>
|
|
This avoids
ModuleNotFoundError: No module named 'virtualenv.seed.embed.via_app_data'
https://github.com/pypa/virtualenv/issues/1873
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I860cc8c4ad2ba509815c5e7cf02fa5e01ee2ed63
|
|
Signal, and implicitly run, main thread session queue node via
interrupts instead of the queue process node.
Process node still needed for timers.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5efd393effc8dad65e4125a3d0ad1be6b7484cb7
|
|
Type: fix
Change-Id: Ia7652fe8e8c20f4f7a019ab7ca0649c2180c7e90
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The reimplementation of python stats module mishandled the case
where pattern to ls was not a list.
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I9ba189423a76f2fd4298c4c4b19a0875f705d719
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I65373f2cd5a33381da1e51ed7ab7a8b1358cef29
|
|
Type: feature
Added make target to install VPPTop - real-time
viewer of VPP metrics.
New targets in /extras/vpptop/Makefile:
* make start - starts the installed VPPTop binary
* make install - does the installation using the local VPP API
* make cleanup - removes the VPPTop local directory
* make help - prints the VPPTop help info
Signed-off-by: Vladimir Lavor <vlavor@cisco.com>
Change-Id: I1b93eaf67214e1fe0567d43409763882caea6416
|
|
Use correct vlib_main() in various code parts. Fix tests.
Type: fix
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: Ia379f3b686599532dedaafad2278c4097a3f03f3
|
|
CID #220403 ~ 220406
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibb65f9f2b17b9a9d45c077933b033ca3a65ae42f
|
|
Type: fix
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: Id3ad783a7b0321a8fa37b4e606c0c4551ca4edd4
|