Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I7fb5402d4a530b5f2ffd9bb5787632099f4b4189
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
* running linting/pycodestyle under python3 provides the additional benefit
of access to the python3 AST.
Change-Id: I659dbd2733471285867be95eec078f7415aa0bcd
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Remove the last remnant from extra/wireshark, update the Sphinx docs
Change-Id: I5886557f17192475c03fcb0dfde581e1e63cea5c
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I764c6565f96e0cb9078503e54e3cf3bb3fd9ff3f
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: Ide06350dfb083ec25a52f6ef79f106abd80ccdbc
Signed-off-by: drenfong.wang <drenfong.wang@intel.com>
|
|
The code that was manipulating interface names with ifreq was
causing warnings about possible truncation and non terminated
strings.
These are warnings only since kernel would allow a interface
name > 15 characters anyway.
Change-Id: I794a94fe310b8568403d4e3523c61d53468a6f02
Reported-by: Burt Silverman <burtms@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Doing strncpy(ifr.ifr_name, s, sizeof(ifr.ifr_name)) will cause
a warning about string truncation with GCC 8 (and other tools).
Fix this by using sizeof(ifr.ifr_name) - 1. Also, there is no
need to manually zero the end of the string since the whole
ifr structure is already zeroed by memset.
Change-Id: I9440d602ecdd9f8592b69bab2e77479146d00d76
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
|
|
Change-Id: I47d021522cfc92cfb3877449333cbf31022c06f4
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Fixed NAT issues with dropping reverse packets in case NAT worked
in 'endpoint-dependent' mode and outside interface has FIB different
from 0 when the output-feature is set.
In this case, the out2in_ed dynamic hash key was not being created
correctly.
Change-Id: I6362967f4b09a375a4606eedaa8e264795b25453
Signed-off-by: Dmitry Vakhrushev <dmitry@netgate.com>
|
|
Change-Id: I4309cefe13ee861342e7962c7652919a47748656
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Remove the source code, replace with reference to the upstreamed
patch.
Change-Id: I6f5430b1e9804530afbec1805353852e1da745d6
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Allocate physmem on the same numa
set link speed
cap vmxnet3 support version to 3 if the device supports higher version
Change-Id: Id47dd83b0da53e623fd6cf3ad010e58158b1ab15
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I7d2385b9e9bf5a62f3e9382ca2627a74a4e30785
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
The detection login in vpp_papi is significantly more advanced than
the implementation in vpp_papi_provider.
Let's take full advantage of it and ensure consistent behavior.
Change-Id: I786e6d5f4588a0d74e863cce1b0bc1a93fa0e614
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
It came to my attention that Ole added a simple test in:
https://gerrit.fd.io/r/#/c/16381/ and the framework forced him
to launch an instance of VPP to test the formatting of a mac address.
This change allows the test framework to run standard unittest.TestCases
without the need to spawn a VPP instance.
Change-Id: I56651ab27c4c6bf920081a526f168a743d643201
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Specify use of version <2.3.1 released Jan 13, 2019
Change-Id: I23cfb802a677956b77897e0c2b690fac50e18541
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I2ef33c7c15b3eb1f55bbfd5cbdd230d6a4d58936
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
Change-Id: I78fe58144fa3ba2e1c7135897a13a2541f235c91
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Some dpdk driver does not support rte_eth_dev_rss_hash_conf_get. When that
happens, we display whatever that was in the stack variable for rss_hf which
is confusing.
The fix is to clear rss_hf prior to the call.
Before the fix
--------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:599: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
...
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: ipv4 ipv4-frag ipv4-tcp ipv4-udp ipv4-other
After the fix
-------------
DBGvpp# sh hard
Name Idx Link Hardware
format_dpdk_device:600: rte_eth_dev_rss_hash_conf_get returned -95
GigabitEthernet13/0/0 2 up GigabitEthernet13/0/0
Link speed: 10 Gbps
Ethernet address 00:0c:29:c4:8c:eb
VMware VMXNET3
..
rss avail: ipv4 ipv4-tcp ipv6 ipv6-tcp
rss active: none
Change-Id: If8f8327f0012eecc8d23cd7f3f9cc581ca025654
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I7e59ae718d2722c49d42b22a0874e1645a191e89
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I747ca01dc8df9fb5e11168ec46979c4a1f1baa7c
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Allow to display longer interface names, e.g. VirtualEthernet0/0/0.102
The field length (32) is now the same as for 'show interface'.
Change-Id: I1cb1efd459acb800bfaeeec40b672c8b17cd8c3d
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
When running tests interactively (i.e. not using child process) the
tests are split into small suites each containing tests from a
VPPTestCase, but only the first suite is run. Fix this by creatin a new
suite with all of these small suites in it and running that suite.
Change-Id: I0236f4a980d01765eb993f41d54d98640bb2cd39
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
Change-Id: I1b327309586c9234a22cda011953a1940d31e1ba
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Given n equals to the maximum number of bytes to copy from src in the API,
or the rough estimate strlen of src, strncpy_s_inline should not copy more
than the number of bytes, computed by strlen(src), to dst if n is greater than
strlen(src). The number of bytes to copy is computed by strnlen(src,n), not n.
Change-Id: I088b46125d9776962750e121f1fbf441952efc2b
Signed-off-by: Steven <sluong@cisco.com>
|
|
On ubuntu:
$cd <basedir>/extras/vpp_config
$./scripts/clean.sh
$./scripts/cp-data.sh
$sudo apt-get install python3-pip python3-setuptools
$python3 -m pip install .
$vpp-config
Changes:
* Convert to print() function.
* raw_input changes.
* floor division changes.
* replace vpp-config.py with a setuptools 'vpp-config' entry_point.
* replace netaddr with ipaddress from the standard library and backport.
* .decode() subprocess.Popen's stdout because in python3 they are bytes.
Change-Id: Id98894ee54e0c31a0ba0304134b159caef415705
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Iede0c30aacfe7289f428062bb9540410097c40e2
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ied476c417c8ba5b4d7c615125c36eecd9ca64fbc
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ic65f686aaccaf8450732d88d7471b587faccaa9d
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
The underlying failure has been fixed and now the test can be
re-enabled.
Change-Id: I75251f6150ef1771dc23ea079799229690cf87d9
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
The underlying failure has been fixed.
Change-Id: If2ca92a17cfed1c2d7253e46ab161f301f847f29
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>
|
|
Change-Id: Ia34a4278eedc8cf450688b1fa0291e1f976868d3
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I8993132bdd0931c96ba8bc879ec3b4ae938a46c5
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: I1bd14d5aff4918b58aef18fa0a9264e033989f6e
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Change-Id: Iea64d246008b298edeeae338d781b79362f42046
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Change-Id: I68cc509b594b09751ff5e0e09bbca187a4a88edd
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: Ia95a75295e4865b4720573f164ccba8bcc7679ae
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I25b2a28513821bc5eab9ac6890a3964d412b0399
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I640e69388f2ab0f66ad60c5165c749f5a5a9f525
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Remove the needless tests and checks which coverity complains about in
string_test.c
Change-Id: I971650cada77136f06528a65625ef99bd3d7e915
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I26f99d95f52c9fe107d17dcbbf5c6185523beade
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: Ic56ee4ce83b282a5f0f5aed500721fe639b941b3
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- fixes in ip.api for dumping mroute path flags
Change-Id: I13b0cfb15d374250ed71bd4e13dda9b798c18204
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Implement API/CLI to clear IP-MAC tables used for ARP-termination
in the specified bridge domain.
The CLI to flush MAC IP tables for a BD is:
set bridge-domain arp entry <bd-id> del-all
The API added is bd_ip_mac_flush.
Change-Id: I34ceb87c0f480c7102f6559312c24081ed485af8
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I6031f3f9cfa048a901a8424d33d47679115c2eb3
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
PR in openssl community is almost done, and need to change some code in VPP
to align with the openssl interface.
Change-Id: Ic7da53e507b67b53958760d07738dd774b1c526d
Signed-off-by: Ping Yu <ping.yu@intel.com>
|
|
It's not OK to crash due to a transient buffer allocation failure.
Return 1 if the requested operation failed, otherwise 0.
Buffer index parameter change to a value-result, so the caller can
differentiate between partial and complete allocation failure: callers
which request an initial allocation (inbound bi = ~0) need to check
the (out) value to decide whether or not to call vlib_buffer_free(...).
Change-Id: I03029d7f2714c17dca4630dfd95a1eb578b68384
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Set TCP checksum to zero, before calculate the TCP checksum.
Change-Id: Id96743334481804b8ebb74afef2f1dbfed29e0cb
Signed-off-by: Andrej Kozemcak <andrej.kozemcak@pantheon.tech>
|
|
Moves LDP logic that allows sharing of sessions between multi-process
app workers into a separate VCL shim layer. Also refactors LDP to use
the new layer.
Change-Id: I8198b51eae7d099a8c486e36b29e3a0cb8cee8e9
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I8195bae1421f68a823b86e12373840f5292ac0df
Signed-off-by: Dave Barach <dave@barachs.net>
|