summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-11-26hs-test: document host stack test frameworkMaros Ondrejicka4-9/+242
Type: docs Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech> Change-Id: I47d2794283a85a644448e60538f543644a0edfdc
2022-11-25interface: remove the pending interrupt from deleting interfaceMohsin Kazmi2-5/+16
Type: fix Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I3138f97519d216b89a9c46865271db1f9ddd53cd
2022-11-25hs-test: auto register test actionsFilip Tehlar8-78/+62
Type: improvement Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: Icb5db6f69eda93181aba69b1f8676a73c0a4561b
2022-11-24sr: srv6 path tracing apiJulian Klaiber4-0/+160
Implements the API for SRv6 Path Tracing Type: feature Signed-off-by: Julian Klaiber <julian@klaiber.me> Change-Id: Iefa7e512c8e1894595a9e3f5d42eab4160db1f28
2022-11-23gso: add gso documentationMohsin Kazmi4-0/+157
Type: docs Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com> Change-Id: I8a96e6cc73b5f7ab3049fef37aafba43f3ef4d84
2022-11-23vpp-swan: Fix segfault for multiple addressesTimur Celik1-2/+2
In order to loop over the list of `vl_api_ip_address_details_t`, increment the pointer by one instead of `i`. Type: fix Change-Id: I8554d1388d67bb95e029eddf444d383fb85ecac7 Signed-off-by: Timur Celik <mail@timurcelik.de>
2022-11-23linux-cp: fix FIB_ENTRY_FLAG_ATTACHEDAlexander Skorichenko1-0/+10
Type: fix     Fib entries for attached routes when sourced from FIB_SOURCE_API or FIB_SOURCE_CLI get the FIB_ENTRY_FLAG_ATTACHED flag raised on the source. Such a route added from linux-cp doesn't get this flag.     Fix this flag for linux-cp sources by passing it to the fib entry's update/create function in lcp_router_route_add(). Signed-off-by: Alexander Skorichenko <askorichenko@netgate.com> Change-Id: I24278ef86886cfee8a14acb250fb6992a754cc3c
2022-11-22policer: adding documentationMaxime Peim14-4/+236
Type: docs Several kinds of policers are implemented in VPP. However, they could differ from the RFCs it is said they are from. Additionally, the CLI command's help has been updated with the current list of acceptable parameters. Signed-off-by: Maxime Peim <mpeim@cisco.com> Change-Id: Ic9bf94e1094bea0fcc87ccaa882c2c5f88824041
2022-11-22acl: fix set acl-plugin cli unformat free.Huawei LI1-1/+2
Type: fix Signed-off-by: Huawei LI <lihuawei_zzu@163.com> Change-Id: Icb5450f4bd0eaef7684eb7e3816d1d6051e889d7
2022-11-21tests: add VCL Thru Host Stack TLS in interrupt modeFilip Tehlar1-0/+22
Type: test Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I7d5a9e9fedfc85bd7fad88f8eae1e46476ec0b7b
2022-11-21ipsec: improve ipsec policy adding performanceXiaoming Jiang1-19/+15
Type: improvement Signed-off-by: jiangxiaoming <jiangxiaoming@outlook.com> Change-Id: I91ba1ff4c1085f4aca60ca111cbbaf14a3b4d761
2022-11-18tls: memory leak due to missing call to vnet_crypto_key_delSteven Luong1-1/+6
We add the crypto key to the vnet crypto library via vnet_crypto_key_add. However, when the session is disconnected, we don't call vnet_crypto_key_del and the memory is leaked in vnet_crypto library as well as in pico tls key store. It seems dispose crypto is the appropriate place to add vnet_crypto_key_del. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: If6d1266baf686fefe5bb81330ce60b35c8ff574e
2022-11-18ipsec: Failure at the start of the batch should not invalidate the rest of ↵Neale Ranns3-15/+53
the batch Type: fix Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: Icd1e43a5764496784c355c93066273435f16dd35
2022-11-15session: add transport main structureFlorin Coras1-39/+37
Leave tp_vfts vector out for now. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ic20a1671be9424280d0645f48ef2131a694cd16f
2022-11-14crypto-ipsecmb: fix plugin crash in VirtualBoxMaros Ondrejicka2-1/+2
Plugin checks just for AVX2 instruction set, while the v1.3 of IPsec Multi-Buffer library checks for both AVX2 and BMI2 sets during init. VirtualBox VM doesn't provide BMI2 by default to guest operating system. Result is that VPP plugin decides to use AVX2 initialization and library then doesn't do it. Since flush_job remains empty, the self-check fails and with that the whole VPP crashes on start-up. Type: fix Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech> Change-Id: I6b661f2b9bbe6dd03b499c55c38a9b814e6d718a
2022-11-14hs-test: skip vcl reattach testFilip Tehlar1-0/+1
Type: test Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I594ecc347f367887890a3182e7c24028bf9a7f50
2022-11-13build: fix lib install dir and add vat2 lib install when build rpm.Huawei LI1-6/+15
Type: fix Signed-off-by: Huawei LI <lihuawei_zzu@163.com> Change-Id: I5ac557756ff2b3de13ce328a27ffdd289ab3173e
2022-11-11http: use safe pool reallocFlorin Coras1-1/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I572017433a1ba0f8576522f02138928e303e10ab
2022-11-11srtp: use safe pool reallocsFlorin Coras1-2/+5
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I15fea1f90640ea54cafe3ea929e871ec6e86fc67
2022-11-11session: safe pools for cut-through sessionsFlorin Coras1-1/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I6dd400285ae475974c416f9b94e8a5b4b6257ca1
2022-11-10session: reduce safe pool expand rateFlorin Coras1-2/+1
Make sure they only double in size. Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I18d5508c7f32836deb3b25943e8e3af39d0dbc33
2022-11-10misc: ignore clangd cache folderMaros Ondrejicka1-0/+1
Type: make Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech> Change-Id: Id6ee2cbf3bf14083a470ef45ef1b6ff3ff8d03aa
2022-11-10linux-cp: fix lcp_itf_pair_create()'s memory leakluoyaozu1-0/+3
need free args.error if args.rv < 0 Type: fix Signed-off-by: luoyaozu <luoyaozu@foxmail.com> Change-Id: I8ceebfc36f51798d8d1a8e4c41bec33d74344396
2022-11-10hs-test: add http client connect testFilip Tehlar5-36/+111
Type: test Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: If705d311065e128b4b6df7d8d80910e4be72d3e6
2022-11-10http: support client connectFilip Tehlar6-53/+981
Type: feature Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I0738c0aefb41ab6c0ff717cfccd1df75ddb481fa
2022-11-10nat: updating my maintainer email addressFilip Varga1-1/+1
Type: fix Signed-off-by: Filip Varga <filipvarga89@gmail.com> Change-Id: I1f5069df2dc743ecd1269e947dd375cb1b84970f
2022-11-09tests: initial asf framework refactoring for 'make test'Pratikshya Prasai45-47/+1907
Type: refactor Change-Id: I41455b759a5d302ad5c4247c13634c471e7d49a8 Signed-off-by: Pratikshya Prasai <pratikshyaprasai2112@gmail.com> Signed-off-by: Saima Yunus <yunus.saima.234@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2022-11-09sr: fix added for configuring vlan sub interface as iif interface in ↵ChinmayaAgarwal1-8/+0
End.AD.Flow localsid Type: fix Signed-off-by: ChinmayaAgarwal <chinmaya.agarwal@hsc.com> Change-Id: Ifad23978b98c5e05d86f6254bfb65baa0b380436
2022-11-09acl: verify that src and dst have sane and same address familyAndrew Yourtchenko1-1/+5
API refactoring moved the address-family tag from rule level down to prefix level. This necessarily warrants the check that they are the same. Also, add a check that the address family is sane. Change-Id: Ia63b688cc9e7c9e9cc773e89708d9e9f99185fb7 Type: fix Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2022-11-09ip: fix unformat_ip_address forcing version to IP4 for some IP6 addressesAndrew Yourtchenko2-18/+20
dd2f12ba made use of ip46_address_is_ip4() in order to determine whether the address is ipv4 or ipv6 within unformat_ip_address - however, its logic is correct only for some addresses. e.g. a valid IPv6 address of :: (unspecified) will result in "true" result. This is probably not an issue for most of the cases (the unspecified address is quite rare), however if the unformat_ip_address is used as part of the prefix parsing, the ::/0 is a fairly often utilized construct, which gets parsed as 0.0.0.0 Solution: return the old logic, but use a temporary variable to avoid overwriting the target memory on failure. Type: fix Fixes: dd2f12ba6ab952d9d66f4d9ba89ffde6309b1ff2. Change-Id: I272f740dfdf07036cec68516e153f0701a53233d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
2022-11-08policer: improvement show policer cli.Huawei LI1-3/+3
cli show policer's help info is not consistent with it's arguments. Type: improvement Signed-off-by: Huawei LI <lihuawei_zzu@163.com> Change-Id: I8332fe97ba343e98511db9ff1bb6afd6f3c657cd
2022-11-07prom: fix stats vector leakFlorin Coras1-0/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I620447c9aa8606a125063cdd724bfe74f8a870f6
2022-11-07nat: fix per-vrf session bookkeepingJing Peng3-34/+26
Each NAT44 ED session has a per_vrf_sessions_index referencing an element in the thread-local vector per_vrf_sessions_vec. However this index can be possibly invalidated by vec_del1() in per_vrf_sessions_cleanup(), before a session is registered. Such a stale index can cause an assertion failure in function per_vrf_sessions_is_expired() when we use it to locate the per_vrf_sessions object. A possible sequence to reproduce is: 1. Create two NAT44 ED sessions s1, s2 so that two per_vrf_sessions are created: index 0: between VRF pair 10 and 11 (expired=0, ses_count=1) index 1: between VRF pair 20 and 21 (expired=0, ses_count=1) For the sessions we have: s1->per_vrf_sessions_index == 0 s2->per_vrf_sessions_index == 1 2. Delete the first session via CLI, now the two per_vrf_sessions become: index 0: between VRF pair 10 and 11 (expired=0, ses_count=0) index 1: between VRF pair 20 and 21 (expired=0, ses_count=1) For the sessions we have: s2->per_vrf_sessions_index == 1 3. Delete the VRF 11: index 0: between VRF pair 10 and 11 (expired=1, ses_count=0) index 1: between VRF pair 20 and 21 (expired=0, ses_count=1) For the sessions we have: s2->per_vrf_sessions_index == 1 4. Create a new session s3 between VRF pair 20 and 21 so that the first per_vrf_sessions will be deleted: index 0: between VRF pair 20 and 21 (expired=0, ses_count=2) For the sessions we have: s2->per_vrf_sessions_index == 1 s3->per_vrf_sessions_index == 0 Here, note that the actual index of per_vrf_session is changed due to vec_del1(). The new session is added after the cleanup so it gets the correct index. But the index held by the existing session is not updated. 5. Trigger the fast path of the session s2. To achieve this, session s2 could be created in step 1 by ping -i20 -Iiface_in_vrf_10 1.1.1.1 and steps 2-4 should then be performed within the 20-second interval. This patch fixes this by changing per_vrf_sessions_vec to a pool so that indicies are kept intact. Type: fix Signed-off-by: Jing Peng <jing@meter.com> Change-Id: I4c08f9bfd50134bcb5f08e50ad61af2bddbcb645
2022-11-07nat: fix byte order error.Huawei LI1-6/+4
fix byte order error about the struct snat_address_t's member net. for example configurations: set interface ip table loop1 1 set interface ip addr loop1 10.10.10.2/24 nat44 add address 10.10.10.2 tenant-vrf 1 the snat address's net should be "as_u8 = {0xa, 0xa, 0xa, 0x0}", but now it's "as_u8 = {0x0, 0xa, 0xa, 0x2}" because of missing transition of byte order about the member net of snat_address_t. (gdb) p/x *snat_main->addresses $3 = {addr = {data = {0xa, 0xa, 0xa, 0x2}, data_u32 = 0x20a0a0a, as_u8 = {0xa, 0xa, 0xa, 0x2}, as_u16 = {0xa0a, 0x20a}, as_u32 = 0x20a0a0a}, net = {data = {0x0, 0xa, 0xa, 0x2}, data_u32 = 0x20a0a00, as_u8 = {0x0, 0xa, 0xa, 0x2}, as_u16 = {0xa00, 0x20a}, as_u32 = 0x20a0a00}, sw_if_index = 0x3, fib_index = 0x1,addr_len = 0x18} (gdb) Type: fix Signed-off-by: Huawei LI <lihuawei_zzu@163.com> Change-Id: I4f25f0639ae90a7f2e8715b44f825571283d994d
2022-11-06ip6-nd: set router flag on NA if appropriateMatthew Smith3-1/+19
Type: fix The router flag on a neighbor advertisement can be used by neighbors to detect that a router has changed to a host (RFC 4861 section 4.4). If a neighbor adds routes after receiving a router advertisement sent by VPP and subsequently receives a neighbor advertisement sent by VPP, it may remove any routes it added based on the RA if the NA does not have the router flag set. It appears that this is how windows behaves. When sending a neighbor advertisement, set the router flag if sending RAs is enabled on the interface. Signed-off-by: Matthew Smith <mgsmith@netgate.com> Change-Id: I1f3e42bbd8ea1a4c116b1ce5a8273652d4cd763d
2022-11-05ip6-nd: initialize radv_info->send_radv to 1Dave Barach1-0/+3
Otherwise, the newly configured interface will never send RADV's. See below. In the typical case, suppress = 0 and is_no = 0, which propagates the current value of radv->send_radv: radv_info->send_radv = (suppress != 0) ? ((is_no != 0) ? 1 : 0) : radv_info->send_radv; No other bit of code will set send_radv, at least in straightforward ways. Type:fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: If9368155f7676460ca1f87729c2b3c453405d08d
2022-11-05hsa: echo client crash when it fails to connect to remoteSteven Luong1-1/+1
When echo client fails to connect to remote, it should quit. Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: I787423bdc61a58eea48bab7bd8b73137626c02b4
2022-11-04classify: fix crash when update nonexistent classify table.Huawei LI1-1/+3
vpp crash when update nonexistent classify table. Program received signal SIGABRT, Aborted. 0x00007fbf3b49b337 in raise () from /lib64/libc.so.6 (gdb) bt 0 0x00007fbf3b49b337 in raise () from /lib64/libc.so.6 1 0x00007fbf3b49ca28 in abort () from /lib64/libc.so.6 2 0x00000000004079db in os_panic () at /usr/src/debug/vpp-23.02/src/vpp/vnet/main.c:417 3 0x00007fbf3bb611c7 in debugger () at /usr/src/debug/vpp-23.02/src/vppinfra/error.c:84 4 0x00007fbf3bb61529 in _clib_error (how_to_die=2, function_name=0x0, line_number=0, fmt=0x7fbf3d03af08 "%s:%d (%s) assertion `%s' fails") at /usr/src/debug/vpp-23.02/src/vppinfra/error.c:143 5 0x00007fbf3c67062c in vnet_classify_add_del_table (cm=0x7fbf3d438f00 <vnet_classify_main>, mask=0x7fbf00fdc088 "", nbuckets=2, memory_size=2097152, skip=4, match=1, next_table_index=4294967295, miss_next_index=4294967295, table_index=0x7fbeed930b98, current_data_flag=0 '\000', current_data_offset=0, is_add=1, del_chain=0) at /usr/src/debug/vpp-23.02/src/vnet/classify/vnet_classify.c:780 6 0x00007fbf3c672bf4 in classify_table_command_fn (vm=0x7fbefb465740, input=0x7fbeed930ef0, cmd=0x7fbefc45ec18) at /usr/src/debug/vpp-23.02/src/vnet/classify/vnet_classify.c:1622 7 0x00007fbf3d52b527 in vlib_cli_dispatch_sub_commands (vm=0x7fbefb465740, cm=0x4273f0 <vlib_global_main+48>, input=0x7fbeed930ef0, parent_command_index=1064) at /usr/src/debug/vpp-23.02/src/vlib/cli.c:650 8 0x00007fbf3d52b2c3 in vlib_cli_dispatch_sub_commands (vm=0x7fbefb465740, cm=0x4273f0 <vlib_global_main+48>, input=0x7fbeed930ef0, parent_command_index=0) at /usr/src/debug/vpp-23.02/src/vlib/cli.c:607 9 0x00007fbf3d52b9cb in vlib_cli_input (vm=0x7fbefb465740, input=0x7fbeed930ef0, function=0x7fbf3d597406 <unix_vlib_cli_output>, function_arg=0) at /usr/src/debug/vpp-23.02/src/vlib/cli.c:753 10 0x00007fbf3d59cb0c in unix_cli_process_input (cm=0x7fbf3d61fe00 <unix_cli_main>, cli_file_index=0) at /usr/src/debug/vpp-23.02/src/vlib/unix/cli.c:2616 11 0x00007fbf3d59d25a in unix_cli_process (vm=0x7fbefb465740, rt=0x7fbf00f7bfc0, f=0x0) at /usr/src/debug/vpp-23.02/src/vlib/unix/cli.c:2745 12 0x00007fbf3d555a25 in vlib_process_bootstrap (_a=140458063833296) at /usr/src/debug/vpp-23.02/src/vlib/main.c:1221 13 0x00007fbf3bb74204 in clib_calljmp () at /usr/src/debug/vpp-23.02/src/vppinfra/longjmp.S:123 14 0x00007fbef10028a0 in ?? () 15 0x00007fbf3d555b4e in vlib_process_startup (vm=0x7fbf3bb7d70f <clib_mem_size+24>, p=0x7fbef10028d0, f=0x7fbf00f06ae0) at /usr/src/debug/vpp-23.02/src/vlib/main.c:1246 16 0x00007fbf3d592be6 in vec_max_bytes (v=0x8) at /usr/src/debug/vpp-23.02/src/vppinfra/vec_bootstrap.h:161 17 0x00007fbf00f06af8 in ?? () 18 0x0000000000000004 in ?? () 19 0x00000000000000ff in ?? () 20 0x00007fbef1002980 in ?? () 21 0x00007fbf3d592dcb in _vec_set_len (v=<error reading variable: Cannot access memory at address 0xfffffffffffffff5>, len=<error reading variable: Cannot access memory at address 0xffffffffffffffed>, elt_sz=<error reading variable: Cannot access memory at address 0xffffffffffffffe5>) at /usr/src/debug/vpp-23.02/src/vppinfra/vec_bootstrap.h:196 Backtrace stopped: previous frame inner to this frame (corrupt stack?) (gdb) f 5 0x00007fbf3c67062c in vnet_classify_add_del_table (cm=0x7fbf3d438f00 <vnet_classify_main>, mask=0x7fbf00fdc088 "", nbuckets=2, memory_size=2097152, skip=4, match=1, next_table_index=4294967295, miss_next_index=4294967295, table_index=0x7fbeed930b98, current_data_flag=0 '\000', current_data_offset=0, is_add=1, del_chain=0) at /usr/src/debug/vpp-23.02/src/vnet/classify/vnet_classify.c:780 780 t = pool_elt_at_index (cm->tables, *table_index); (gdb) p *table_index $1 = 8 (gdb) p cm->tables $2 = (vnet_classify_table_t *) 0x0 (gdb) Type: fix Signed-off-by: Huawei LI <lihuawei_zzu@163.com> Change-Id: I1c5f6168f0a7e1d1989ce07ec6c30c6fd9f0aaa9
2022-11-04nat: cleanup of deprecated featuresFilip Varga3-296/+0
Type: refactor 1) Removed deprecated API. - These specific APIs do not have repleacement because features that they controled aren't part of current NAT44-ED implementation anymore. 2) Removed unused typedef of port allocation funciton. - Missed left over removed. Change-Id: Ib3f763449065eda7cdcb2c6565a9cae51baf23d6 Signed-off-by: Filip Varga <filipvarga89@gmail.com>
2022-11-03tls: crash in mbedtls due to ctx is already freeSteven Luong1-1/+0
_clib_error (how_to_die=2, function_name=0x0, line_number=0, fmt=0x7fffb3a7e1b5 "%s:%d (%s) assertion `%s' fails") at src/vppinfra/error.c:143 mbedtls_ctx_get (ctx_index=0) at src/plugins/tlsmbedtls/tls_mbedtls.c:114 tls_ctx_get (ctx_handle=536870912) at src/vnet/tls/tls.c:310 tls_app_session_cleanup (s=0x7fffbf102040, ntf=SESSION_CLEANUP_SESSION) at src/vnet/tls/tls.c:624 app_worker_cleanup_notify (app_wrk=0x7fffbef95f80, s=0x7fffbf102040, ntf=SESSION_CLEANUP_SESSION) at src/vnet/session/application_worker.c:445 session_cleanup_notify (s=0x7fffbf102040, ntf=SESSION_CLEANUP_SESSION) at src/vnet/session/session.c:262 session_free_w_fifos (s=0x7fffbf102040) at src/vnet/session/session.c:268 session_delete (s=0x7fffbf102040) at src/vnet/session/session.c:287 session_transport_delete_notify (tc=0x7fffbdf63c40) at src/vnet/session/session.c:1159 tcp_handle_cleanups (wrk=0x7fffbef46d40, now=133.30033046694487) at src/vnet/tcp/tcp.c:1298 tcp_update_time (now=133.30033046694487, thread_index=2 '\002') at src/vnet/tcp/tcp.c:1309 session_update_time_subscribers (smm=0x7ffff7f75ce0 <session_main>, now=133.30033046694487, thread_index=2) at src/vnet/session/session_node.c:1817 session_queue_node_fn (vm=0x7fffbdfad1c0, node=0x7fffbe0b1340, frame=0x0) at src/vnet/session/session_node.c:1934 dispatch_node (vm=0x7fffbdfad1c0, node=0x7fffbe0b1340, type=VLIB_NODE_TYPE_INPUT, dispatch_state=VLIB_NODE_STATE_POLLING, frame=0x0, last_time_stamp=4722227957546624) at src/vlib/main.c:960 Putting a breakpoint in gdb, I found out ctx was free in mbedtls_app_close. Looking at app_close function in picotls and openssl, I don't see they free ctx and they don't crash when processing cleanup. I am inclined to think that mbedtls_ctx_free should not be called in mbedtls_app_close at src/plugins/tlsmbedtls/tls_mbedtls.c:92 at src/plugins/tlsmbedtls/tls_mbedtls.c:559 at src/vnet/tls/tls.c:360 thread_index=2) at src/vnet/tls/tls.c:762 conn_index=536870912, thread_index=2 '\002') at src/vnet/session/transport.c:332 at src/vnet/session/session.c:1608 elt=0x7fffbdfef3dc) at src/vnet/session/session_node.c:1672 node=0x7fffbe0b1340, frame=0x0) at src/vnet/session/session_node.c:1966 node=0x7fffbe0b1340, type=VLIB_NODE_TYPE_INPUT, dispatch_state=VLIB_NODE_STATE_POLLING, frame=0x0, last_time_stamp=4721919444027682) at src/vlib/main.c:960 Type: fix Signed-off-by: Steven Luong <sluong@cisco.com> Change-Id: Ic5c13e659aee618c8accee42af9f40931b62f467
2022-11-03misc: fix failing TestNs/TestHttpTps test in hstfMaros Ondrejicka1-1/+6
Type: fix Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech> Change-Id: I03cbd05d6d887d2ce8e7b7d20522e04012c5fe7a
2022-11-03session: fix tx_fifo clear and incorrect bitmap invalidationDongya Zhang2-5/+12
The tx_fifo of session may not be set up yet, if app request to disconnect the session, svm_fifo_dequeue_drop_all will crash. In debug image, ho_session_alloc will do clib_bitmap_validate to prevent race condition, however the input is not correct which will make vpp crash. Type: fix Change-Id: Ia8bff325d238eacb671e6764ea2a4eecd3fca609 Signed-off-by: Dongya Zhang <fortitude.zhang@gmail.com>
2022-11-02sr: SRv6 Path Tracing Midpoint behaviourJulian Klaiber4-0/+196
Type: feature Signed-off-by: Julian Klaiber <julian@klaiber.me> Change-Id: I866a2d2e06013380309c98a54078c1b3f6ad76fc
2022-11-01vpp-swan: remove step to copy vpp_sswan source for docker imageYulong Pei6-6/+4
Since vpp_sswan plugin already merged in /vpp/extras/strongswan, no need to provide additional vpp_sswan source files for docker image. Type: fix Signed-off-by: Yulong Pei <yulong.pei@intel.com> Change-Id: I35bad22b1046e0dddbcf39e1af38d589d1438239 Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2022-10-31quic: use safe pool reallocFlorin Coras1-1/+2
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia03c3fe0ca669b319dec8decd503254d0a95e58b
2022-10-31tls: use safe pool reallocsFlorin Coras5-56/+14
Type: improvement Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ia2c771cbf826526d2d06b6da022509ab02917350
2022-10-31tests: session in interrupt modeFilip Tehlar1-0/+9
Type: test Signed-off-by: Filip Tehlar <ftehlar@cisco.com> Change-Id: I2deba97a8dfff907f0e2452e9347d6a68474ce92
2022-10-29build: add extra rpm build dependenciesTianyu Li1-0/+1
make install-ext-dep failed with, sudo rpm -Uih vpp-ext-deps-23.02-4.aarch64.rpm error: Failed dependencies: perl(IBswcountlimits) is needed by vpp-ext-deps-23.02-4.aarch64 vpp-ext-deps have dependencies on infiniband-diags and libibumad Type: fix Signed-off-by: Tianyu Li <tianyu.li@arm.com> Change-Id: I2aea453f53d6507285b4f87f04c6dfc4845098cd
2022-10-28cnat: Fix unformat_cnat_snat_interface_map_typeMiguel Borges de Freitas1-1/+1
Fix initialization of the table u32 var which is leading to the incorrect unformat of interface map type Type: fix Signed-off-by: Miguel Borges de Freitas <miguel-r-freitas@alticelabs.com> Change-Id: I1e56acd0e4c735df755e85b172bb6623bf47a57b
2022-10-27vcl: register workers when reattaching to vppMaros Ondrejicka8-12/+235
Type: improvement Signed-off-by: Maros Ondrejicka <maros.ondrejicka@pantheon.tech> Change-Id: I82a286e2872338974c1930138c30db78103ae499