Age | Commit message (Collapse) | Author | Files | Lines |
|
Report if the messages were marked as deprecated,
but not yet deleted.
Useful for building the release notes and comparing
between the releases.
Also, put the dict_compare() call into the report(),
since latter always consumes the output of the former.
Change-Id: Iceab3e94ff66da931a4669b612026bd162dd5d1a
Type: improvement
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 62bd50de97cd90cc09559a09fe46f98211279a1e)
|
|
Type: improvement
Change-Id: Ib64c9b8207776986656e5a26c13a221edc6cc950
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit 698eeb126d01427313949241b961c27347db8c72)
|
|
Type: fix
add UT for sneding handshale init and transport packets
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Iab1ed8864c666d5a0ae0b2364a9ca4de3c8770dc
(cherry picked from commit d75a2d12c431fcffba2a2b4d59f18c9cec483ed9)
|
|
VAT crashes when the one_add_del_local_eid api is invoked with mac
address as eid.
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I29e246f6cad4b350fec52d54e94dbed586d488c4
(cherry picked from commit 5f473c0efc9e0ff068273520b058b8ac498dc597)
|
|
The lisp|one show eid-table command's help msg does not display the
available options. This patch fixes that.
show lisp eid-table [local|remote|eid <eid>]
show one eid-table [local|remote|eid <eid>]
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id39148db2ff291a7fe859830c1488b69ccd15c05
(cherry picked from commit b418c397dc8c870c6561ea1d7565067333db9df4)
|
|
In the vat help msg for one_add_del_l2_arp_entry the IP address option
is misspelled as "ip4 <ip4>" when it should have been "ip <ip4>".
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Id4058a3ddfdb78b840d7e5a3c330e67b393f5d3b
(cherry picked from commit 8c6ba2957c985a1670e9fca6bc869008e6722364)
|
|
The local|remote options to vat's lisp|one_eid_table_dump api command
does not print the eid details instead it produces the following error
messages:
Filter error, unknown filter: 1
Filter error, unknown filter: 2
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: I000c290b400dbf39bd883d57115923167092c9bd
(cherry picked from commit 2237cc8ce1e0eb7222a34bb30bdeb2f3f1df9a81)
|
|
It may happen that process node is suspended while it waits for response
from adminq and during that time CLI or API process can call
avf_delete_if. When avf process node resumes, it may happen that device
is not there anymeore.
This patch delegates interface deletion to process node, so CLI/API
process just sends signal instead of deleting device instance itself.
Type: fix
Change-Id: I7f12e12df3071650f6e60ad7eb5af23b7acfe335
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit 66bb7dd64ee2377103e18b96f1e6bf6405de44b5)
|
|
Multiple (> 1) workers leads to handoff node being enabled.
This node pops next feature index to nat.arc_next to make sure
that packet will be pushed to the next feature in the arc.
But node nat44-ed-in2out-output also pops next feature and changes
arc_next. So actual next feature will be skipped in that case.
It leads to all nat44-ed-in2out packets being dropped if we have
multiple workers (handoff node enabled).
To resolve this a new node was added (nat-pre-in2out-output) to fill
arc_next in single worker case and multiple worker case is already
handled by handoff node.
Type: fix
Signed-off-by: Vladimir Isaev <visaev@netgate.com>
Change-Id: I9dfba68f00164d2d5ab867224871811bef4411ed
(cherry picked from commit 8fb4d10dc208fb3f284fe79e838343797cb2d813)
|
|
Type: fix
Change-Id: Icf6ce0ddb5fe9d078503e9d9ff7e7b26423f53f8
Signed-off-by: Filip Varga <fivarga@cisco.com>
(cherry picked from commit 2fe25370ba0deed78c1240fa6788c5b5f14d6f97)
|
|
Type: fix
Change-Id: I4c19636c2be8a577c6cba272708cb04bcc24785b
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
(cherry picked from commit 8847749269ffd591c7fb6c290b4a311f186fb7c5)
|
|
With packet trace on, VPP crashes when an arp packet arrives. This patch
fixes the crash and also ensures that the packet trace displays the eid
info.
Type: fix
Signed-off-by: Onong Tayeng <otayeng@cisco.com>
Change-Id: Iaad09a5e2b33e931ab9bd7bc3d4573b5ed5e4bfd
(cherry picked from commit a3960a8b74de5cef51db2c7575f8f2d71a013d0a)
|
|
Type: fix
Change-Id: I96e8c5c9c792b1d9aefd39ce3e240d220827b7d1
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
(cherry picked from commit cf527882e2fe49eda108cd63af175431222beebe)
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Icc1c458474d357c7d9b3b4df1897500de0c314a1
(cherry picked from commit a26b0d11e91e9abca6220e50f0240ab6ae09c6d3)
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I7f98d0c7847ecc40b90b78e5ae83f320575be310
(cherry picked from commit 69f77a3a3cca70876bd27c84b5ae932ca942d8de)
|
|
Type: fix
Change-Id: Id61aa407eeeb4d44cf47ed39283a0c79ed3abbee
Signed-off-by: Damjan Marion <damarion@cisco.com>
(cherry picked from commit 139a6ae0dd460a6b8a5884e65cfd96f0c409f69e)
|
|
1. Remove uncessary runtime dependency;
2. Add missing build dependency;
3. Fix runtime dependency for api-python3 RPM;
Type: make
Change-Id: I2700f1a15112effba8d1527aca6467158f81f486
Signed-off-by: Yichen Wang <yicwang@cisco.com>
(cherry picked from commit 466872f0896139b34ef8ccf12f7fcc0093d7cb19)
|
|
Type: fix
Change-Id: If44c807d188b3e88d819f4132d73e6a34402a525
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
(cherry picked from commit 999395cd6644a297c01dd6de033cf1ffb4e9951b)
|
|
Type: fix
Change-Id: Ic07d0ae313b32e420ba93693cb75960a86f752a9
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 3f0ae664faf33578515ffa1fd5287ad692f16c6f)
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ibbe438aa6f2fe6d9f55c56ca6d3aec1a29b32cad
(cherry picked from commit 4a2c794c431c72364e241fa14327f03e35b886b7)
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ib1eabbc87a573c660ac251602d631f167928259b
(cherry picked from commit 76770fd659420c23e43422d672a55e268f042129)
|
|
Type: fix
Change-Id: I1b4f52e186165b04db5bd5f11058dc77b647bc94
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 268e3b647733807dbecf402fcebedceff4c85544)
|
|
Type: fix
Static analysis identified a possible null pointer dereference. It
was introduced by a recent patch which expanded the DMAC comparison
on inbound packets on a BVI interface to include any secondary MAC
addresses which were added to an interface.
Check if the pointer is null before dereferencing.
Change-Id: Ic2afe2b062eda32977e05bf3f98d82c1fe64620c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
(cherry picked from commit 78681def21b931309a779dfc6a5cbc6ff8b1f814)
|
|
- make sure everything is freed on cleanup
- reuse already allocated vectors where possible
Type: fix
Change-Id: Ibd8da1edb37126522dc2d525596521d32dceb73a
Signed-off-by: Benoît Ganne <bganne@cisco.com>
(cherry picked from commit 730cec8c0697627cc1fb6a34acd094c77ba07622)
|
|
vpp-20.05 on up-to-date Centos 7.8 host with enforcing SELinux fails to
create a host-interface due to two missing SELinux-permissions:
vpp_t self:packet_socket { read write }
This simple patch adds these two permissions. Tested successfully on
local installation.
The steps to reproduce:
$ ip link add vpeer-host type veth peer name vpeer-vpp
vpp# create host-interface name vpeer-vpp
create host-interface: Permission denied (errno 13)
[...]
$ semodule -i vpp-packet-socket.pp
vpp# create host-interface name vpeer-vpp
host-vpeer-vpp
Type: fix
Ticket: VPP-1931
Change-Id: I2b3d92b27b9a9f26aa1c85af2946b15e83e27944
Signed-off-by: Martin Millnert <martin@millnert.se>
(cherry picked from commit 68849350c56b0258d21fc906b09df71a1951f694)
|
|
Change-Id: Ic31cde8564a0705710d91e0a7b90dcc6cf2f8db6
Type: fix
Signed-off-by: Aloys Augustin <aloaugus@cisco.com>
|
|
Type: docs
Change-Id: If8602d4b73cc1f04e42d19b8df60a05f67aa90c9
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
(cherry picked from commit 5d2091da2a96cb1092b0744cdee8bb481788a6dc)
|
|
Type: fix
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ie328834159687cdb4314c37d36697f2fb9081fbd
(cherry picked from commit 504bcb7c29da6ab45656f54cda394cccb0d97dae)
|
|
Change-Id: Ic40bf11210cf1c36420578281f5a42668bad9801
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit f8b319359cd2a24271dbe7cebfc8a4147ab89727)
|
|
Change-Id: Ibb982c877427c8382a30ee561c23d878adc9c28d
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: docs
Change-Id: I5f20ac0232c5cdc3cf64015185b0d0fc5c4a3100
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: docs
Change-Id: I1a37450261e0bcedf90685243b14027f3cf23704
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
VRRP cannot be used on a BVI interface currently because packets sent
to the virtual mac address of the VR fail the destination mac check in
l2_to_bvi().
Apparently people want to use VRRP on BVI interfaces, so update the
check in l2_to_bvi() so that it will check any secondary mac addresses
which have been added to the ethernet interface if the destination mac
address does not match the primary mac address for the interface.
An equivalent check is already done in ethernet_input_inline() for L3
interfaces which are in promiscuous mode.
Change-Id: I7c5bf624dafda8744fea236c704e8e17e5f53b35
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: docs
Change-Id: I91a954abf77335e1ddcbd1468633d9d7980bbac2
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: fix
Change-Id: Ia9cd71ce12584cd8ef90bfe357cf762dd7653f71
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
also, remove a duplicate 17.01.1 section and wrong page tag for 20.09
Change-Id: Ia2cc77faa75cccab38972ad46517762cb7456466
Type: docs
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Type: feature
The main information about plugin you can see in README.md
vpp# wireguard ?
wireguard create wireguard create listen-port <port> private-key <key> src <IP> [generate-key]
wireguard delete wireguard delete <interface>
wireguard peer add wireguard peer add <wg_int> public-key <pub_key_other>endpoint <ip4_dst> allowed-ip <prefix>dst-port [port_dst] persistent-keepalive [keepalive_interval]
wireguard peer remove wireguard peer remove <index>
Change-Id: I85eb0bfc033ccfb2045696398d8a108b1c64b8d9
Signed-off-by: Artem Glazychev <artem.glazychev@xored.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jim Thompson <jim@netgate.com>
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
This patch updateds cryptodev engine uses new DPDK Cryptodev
API planned to be upstreamed in DPDK 20.11.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Piotr Bronowski <piotrX.bronowski@intel.com>
Change-Id: I8dd1a8ac643f1e952deb787e466b76ea7aa5f420
|
|
This patch adds the RSS steering queues set interface, and it's
implementation in DPDK device:
/* Interface to set rss queues of the interface */
typedef clib_error_t *(vnet_interface_rss_queues_set_t)
(struct vnet_main_t * vnm, struct vnet_hw_interface_t * hi,
clib_bitmap_t *bitmap);
This patch also introduces a command line to set the RSS queues:
set interface rss queues <interface> <list <queue-list>>
To display the rss queues, use "show hardware-interfaces"
Below is the example to configure rss queues for interface Gig0:
vpp# set interface rss queues Gig0 list 0,2,4-7
vpp# show hardware-interfaces brief
Name Idx Link Hardware
VirtualFunctionEthernet18/1/0 1 down VirtualFunctionEthernet18/1/0
Link speed: unknown
RSS queues: 0 2 4 5 6 7
local0 0 down local0
Link speed: unknown
vpp#
Users can also configure the rss queues on a dpdk interface in
startup.conf:
dpdk {
dev 0000:18:01.0 {
rss-queues 0,2,5-7
}
}
Type: feature
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: I1835595a1c54016a84eabee9fd62ce137935385d
|
|
Type: fix
Signed-off-by: Rajesh Goel <rajegoel@cisco.com>
Change-Id: Ib37802f4270fe894a31e871c7fbb12b5a1cdf058
|
|
Type: fix
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: If5a8313262da828616db8b1d9ef831d42b11d952
|
|
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: I4dee2ea723631e1bd95b33a74b9431d984565aef
|
|
- These were displaying blank, apparently dpdk extended stat strings
must be within the heap so they are identified as vectors by
format_c_identifier even though they are not.
Type: fix
Change-Id: I2b153b100203b9856ce3af6d5ecb2daae410fb5b
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
Was seeing imissed counter become negative. Reuse the RX_ERROR code for all
three error counters to avoid the problem.
Type: fix
Change-Id: I99a69c8816326682745785ecd30e18a131ac2969
Signed-off-by: Christian Hopps <chopps@labn.net>
|
|
Type: fix
- Document that ooo dequeues with ooo lookups cannot be done in
combination with in order dequeues.
- Added assert to capture this scenario and de-initialized rbtrees for
cut-through tx fifo
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic40d020b3f0391fcf022ea3c906b86121744144f
|
|
Not all ESP crypto algorithms require padding/alignment to be the same
as AES block/IV size. CCM, CTR and GCM all have no padding/alignment
requirements, and the RFCs indicate that no padding (beyond ESPs 4 octet
alignment requirement) should be used unless TFC (traffic flow
confidentiality) has been requested.
CTR: https://tools.ietf.org/html/rfc3686#section-3.2
GCM: https://tools.ietf.org/html/rfc4106#section-3.2
CCM: https://tools.ietf.org/html/rfc4309#section-3.2
- VPP is incorrectly using the IV/AES block size to pad CTR and GCM.
These modes do not require padding (beyond ESPs 4 octet requirement), as
a result packets will have unnecessary padding, which will waste
bandwidth at least and possibly fail certain network configurations that
have finely tuned MTU configurations at worst.
Fix this as well as changing the field names from ".*block_size" to
".*block_align" to better represent their actual (and only) use. Rename
"block_sz" in esp_encrypt to "esp_align" and set it correctly as well.
test: ipsec: Add unit-test to test for RFC correct padding/alignment
test: patch scapy to not incorrectly pad ccm, ctr, gcm modes as well
- Scapy is also incorrectly using the AES block size of 16 to pad CCM,
CTR, and GCM cipher modes. A bug report has been opened with the
and acknowledged with the upstream scapy project as well:
https://github.com/secdev/scapy/issues/2322
Ticket: VPP-1928
Type: fix
Signed-off-by: Christian Hopps <chopps@labn.net>
Change-Id: Iaa4d6a325a2e99fdcb2c375a3395bcfe7947770e
|
|
Add the ability to configure the pp2 rx and tx queue sizes in the CLI.
Type: improvement
Signed-off-by: Christian E. Hopps <chopps@chopps.org>
Change-Id: I6a824f92e22fa47fec3d84525cc2d82524ddf639
|
|
Type: fix
Calling vlib_get_node_by_name via the VPE api
doesn't work due to hash weirdness. Haven't
gotten around the real cause of this. But this
fixes it.
Change-Id: I89f95dba2bcd9573b8f1f435e063e9dd57f9ca93
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Type: docs
Change-Id: Ib985ed6a644ae3f4c330bf6a27dc69c49a489a2f
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
|
|
Otherwise, the debug CLI command is unusable in a script because it
will eat (and complain about) subsequent lines in the script. Missing
this guitar lick, etc:
/* Get a line of input. */
if (!unformat_user (input, unformat_line_input, line_input))
return 0;
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Id328e6f1cc4d2e1672c3946db3865ab5a1a3af8d
|