Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ic37f640b7f0d0a041c003e76c8f29c21b5e664b3
|
|
Type: improvement
Change-Id: I4ac6b1a6553e26a5c26b6761fa3c4cc5d4925486
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: fix
virtio/tap interfaces set the empty buffers in the input node
for receiving data. Backend uses those buffers, fills them with
data and notifies the virtio/tap driver. But virtio/tap driver
gets into stall state if interface is created and configured
through exec script on VPP startup.conf and put the interface in
interrupt mode while VPP is only configured with main thread.
This patch fixes the problem by prefilling buffers during the
interface creation.
Change-Id: Ibc4d0e70e127ccc4b7cf8b2b18406ae4b02c73b4
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
A given interface counter (e.g rx) can be accessed via
/interfaces/<interface_name>/<counter_name>.
Same goes with nodes: /nodes/<node_name>/<counter_name>
As interfaces may contain '/' in their names,
these are replaced by '_' in symlinks
Also added 2 tests for the stat segment
Type: feature
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I27da252e7b3dc177815616ca46b5c200a456bf0f
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Enable configuration of DPDK's max-simd-bitwidth through the startup.conf
Type: improvement
Change-Id: I455148714ffc7caa257931526f310dbefd7ab01c
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
|
|
Change-Id: I2c45b160d76883044a3a7db0afcac0c56bcd2bcf
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: feature
|
|
Change-Id: Ic2b853cda98c3010d2abb5c7ada1b1f6c5bc9f74
Signed-off-by: Mohammed Hawari <mohammed@hawari.fr>
Type: fix
Fixes: ca1812dbe714fc8e4de13f88df2d3b830d95a2c9
Ticket: VPP-1980
|
|
Type: feature
Change-Id: I911ee94b624ef5edf46b34666597eff93df1d1ed
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: improvement
Change-Id: I7b78a8470aa3fd271120587d08e82afb23cb195b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: make
Change-Id: Icf37873b461cd034567dc1b99e23d1bbb3f4b9f0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I277f2e9ae2b763f5833778406d11218211163e43
|
|
We add interface address to the global lookup table, so we should
use it as the key when lookup listener. Otherwise, when multiple
threads listen on 0.0.0.0 (local scope disable), duplicate
listeners and sessions would be allocated but only one works.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: I86f36475c16e217c6c5293a62c4fb5c9477a191e
|
|
Type: fix
Change-Id: Ifc4b30675365ebb5d69c018a34fd17a5090b30e1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Fact that it needs to copy buffer indices justifies this move.
Type: improvement
Change-Id: I5eb815ccc4cca0ef70b092eb83a49b713efdcbeb
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2992c66d11fe6adc96b525b0fde533e5ff58d7e4
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I433cc1b7a29f785a431618641317bbfbbe2cf2f4
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I06cd3721c1b534e9449bf96760c02ca30628c21e
|
|
trajectory trace has been broken for a while because we used to save the
buffer trajectory in a vector pointed to in opaque2. This does not work
well when opaque2 is copied (eg. because of a clone) as 2 buffers end up
sharing the same vector.
This dedicates a full cacheline in the buffer metadata instead when
trajectory is compiled in. No dynamic allocation, no sharing, no tears.
Type: refactor
Change-Id: I6a028ca1b48d38f393a36979e5e452c2dd48ad3f
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: make
Change-Id: I53f7995c7e7a7ff829c662d71f37d88780bdd140
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: make
Change-Id: I780c1c81a50cb92bc89c05856efd8ef88479c0ab
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: make
Change-Id: Iaeb9d22eec9a7a763b63899814a44e78c8050f1f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
A transport's custom_tx function must report the number of segments that
it enqueued.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie088c4215e6f17df639159820b8adf46b96fbb46
|
|
Add option to print per second tx stats
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I7f226a6521da13ab29de65a441f73d4e56fb57cf
|
|
Type: make
Change-Id: Ia39c2f847e7b4907fdd3fcac75897b8b4c545a65
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Makes sure we don't notify apps of sessions that are closing or multiple
times for the same session.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I07145e5e00bbe8eb1df2946059459e9fe05cfeb7
|
|
We should cleanup sessions in CREATED state when listener goes
down, otherwise they may use unpredictable sessions as listeners
later.
Type: fix
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Change-Id: Ifbd0a0fb46275bd9d89e5aee19a70c1d01d15764
|
|
Type: fix
Change-Id: I984a3e577a4209e41d046eaf3a8eef8986dc6147
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
- poll session events in server
- init session buffers based on config
- cleanup some of the data structures
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I81c19e6546c8292db07b63c66e4da03ef7f55e22
|
|
Also avoid syscalls if timeout is 0.
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9193d731c51a1432a52c89d5e54e6406e5100c96
|
|
Type: improvement
Change-Id: I1382813211ea20c6204d7a3b6e6d470aa51aed69
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
While running test:
==============================================================================
NAT44ED Test Case
==============================================================================
==>
==============================================================================
NAT44ED Test Case [main thread only]
==============================================================================
==============================================================================
NAT44ED Test Case [1 worker thread]
==============================================================================
==============================================================================
NAT44ED Test Case [4 worker threads]
==============================================================================
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I61904b411ff1b58700564698079dc4c07cea5c5e
|
|
Type: improvement
Change-Id: Idc82d40a16cbc8a401a8fb359bc63083f47361b9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In preparation for removing Python shared memory support, change the default to use sockets.
This may affect users of PAPI. E.g. if running against instances of VPP where
the API socket is in a different location or disabled.
Type: improvement
Signed-off-by: Ole Troan <ot@cisco.com>
Change-Id: I96308ed70b9ff314c9b487722174f5e4b14efdd2
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
A number of the pg commands were being passed the whole exec file,
instead of just a line from the file.
Type: fix
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Change-Id: I2f96e7648b9b7d501088eddff7e4a761973e71f4
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I9a4bf384be65ba8b868d1172c7b6e00ae959601e
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ie0d5fe97a727465f8851fc2110219483a5bf3f27
|
|
Type: improvement
Signed-off-by: Arthur de Kerhor <arthurdekerhor@gmail.com>
Change-Id: I769db1213b0936abbf304bc6cf9dbcfbbebf06aa
|
|
Type: fix
The code for quota exceeded events is a u32 and was being copied
into ipfix packets in host byte order. Same for the limit field.
Swap the order before copying into packet buffer.
This change was applied once before but had to be reverted. This was
because between the time the change was uploaded/reviewed and the
time it was merged, a different patch was merged which activated a
NAT ipfix unit test that had formerly only been run as part of the
extended tests. The test was expecting the values to be in host byte
order so it failed with this patch applied. This time around, that
test has also been updated to expect network byte order.
Change-Id: If5413b1f806d664f6786e56ba13c3eee573c26d2
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: test
Signed-off-by: Neale Ranns <neale@graphiant.com>
Change-Id: I5c540b3a2f26689973daec80372c5a935a455a12
|
|
Type: make
Change-Id: I751b0a25161c6eb8614ca19f7c77a4de82401f3d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I08969e1c4a78f8ac92ec066a3b67e64dc931bc16
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: improvement
Change-Id: Ib7b2fa7d821f6d2708f6dc378a0f36f68c843f57
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Define custom connect, listen, accept, close handlers for transport
protos under test.
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ifa260d05917256c590f29078f465ce47c576cbc3
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I18eb1a71ac22017f75f835a23a57b023b46524ce
|
|
Type: make
Change-Id: I79d8d0aa8b8349df0b3c1f338861350e8df31ca6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: fix
Change-Id: I17e7b3fca390c0b0150c4606f7c93771ee9bdbdc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
arp and ip6-nd are not plugins [yet]. Change the files location to
reflect its current correct locations.
Type: fix
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ibcde8867cc50abbf2061d1e80390c528393ec4df
|
|
Type: fix
Signed-off-by: Ryo Nishikawa <nishikawa0320@gmail.com>
Change-Id: Iabf7e088245395ea3fff62a22266a31de3fc305e
|
|
Type: fix
The process node which wakes up when a timer expires and transitions
a backup node to master state may call a function to add a MAC address
to an interface. This works fine for some devices, but with DPDK 20.11
on i40e interfaces, the i40e PMD functions which enact the change cause
the stack to be exhausted. Increase the stack size for the node.
Change-Id: I824603e162f4f6d680486706210986572f0d9845
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Type: feature
Added target 'make go-api-files' creating compatible go bindings
using JSON API definition and GoVPP binary API generator.
Signed-off-by: Vladimir Lavor <vlavor@cisco.com>
Change-Id: I5bae113b85eaf5ebda8e292d34c9826075ef19b5
|