Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: fix
"set int state <interface> down" puts the virtio device link
down. It will not put the link in "UP" state, when
"set int state <interface up>" will be used again to change
the interface admin up. This patch fixes it.
To test:
create tap
set int state tap0 up
set int state tap0 down
sh hardware
sh int
set int state tap0 up
sh int
sh hardware
Change-Id: I3c0e31539f8a2a1e40220e7fb57eedecf408f067
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Type: feature
Change-Id: Ifee2b3dca85ea915067b9285e3636802bf0c19a8
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Type: fix
Some vhost-backends give used descriptors back in
out-of-order. This patch fixes the native virtio to
handle out-of-order descriptors.
Change-Id: I57323303349f6a385e412ee22772ab979ae8edbf
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
On SMP architecture, '/sys/bus/pci/devices/<devices id>/numa_node' file
will return -1 as a valid value if it does not have any NUMA node information.
Using -1 as a valid node id to access data structures will cause memory issue.
Fix the error by setting the value of numa_node to 0 if '/sys/bus/pci/devices/
<devices id>/numa_node' returns -1 and it is a SMP system.
Type: fix
Change-Id: Ib60e79c3656fe5b17e08fd9011122683e8b08b6f
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I6ce6fb0fe0ceb8a70b6a13e6a72fdb842bfded7a
|
|
Type: improvement
Change-Id: I09b017d60bc38ff8a4a7a73aff42b27611bd8955
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: I45c6f434065ab0ad8ada3184b5a875a32a1b3faa
|
|
Type: fix
Signed-off-by: Jawahar Santosh Gundapaneni <jgundapa@cisco.com>
Change-Id: Ife0f7749a72cc834a3d811f8cf6b5a0840157014
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I6b2c7550ae5918c27b02b1173533d2042c6c15c7
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5120eb321e9e2050eb64dca9e2dfb6256ff2b62d
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Iae9f118f710153b6c0e390265039db7434e67ed8
|
|
Type: improvement
Use only one api to retrieve transport send parameters. Additionally,
allow transports to request postponing and descheduling of events.
With this, tcp now requests descheduling of sessions when the
connections are stuck probing for zero snd_wnd
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I722c974f3e68fa15424c519a1fffacda43af050c
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: Ia2e29b4776c0f8df666da39a14c5ef2fa1693c21
|
|
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I73d27520726543d6375caad76a841339f68c3533
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ib7a9e457cb2462e6ce9e5e2af53d1f997f4ae6cf
|
|
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5a5efde5378f63d89d82d71ae009c7595aaa800c
|
|
Rather than leaving 2 bytes of junk in the upper word
of a mac address represented as a u64, zero them out.
That way later compairsons stand a chance of matching
when deleting a bridge's arp termination entries.
The volatile qualifier shouldn't be needed here, but
without it the compiler removes the clib_memcpy() at -O2.
Bad compiler. No biscuit.
Type: fix
commit: faf22cb303b65e2a6bf8dad959d7f5ee6d031c4f
Change-Id: Iebcf35fdd421293dccbcaefadef767f7e139438e
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
update packet generator test scripts to reflect latest code changes
Type: fix
Signed-off-by: ShivaShankarK <shivaashankar1204@gmail.com>
Change-Id: I048a5e8b9b0506dcb0b664e5549d13f51b2e2ea6
|
|
Type: improvement
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ia8dff15855a81cf29729bdaa3ff28fbe3254fa97
|
|
Type: feature
Adding a very simple test case just to confirm that setting fifo size
same as the current in-use size would result no space to enqueue, which
is zero-window in the TCP.
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I6d60449386eaa270f801d2046cc7e546f843bf34
|
|
Type: improvement
type re-use.
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: Ic2a2e6babf9ae66a1e53aec53a6cd157e1893dc8
|
|
Type: fix
Change-Id: I901c9384710eee5847b3fbce060c78e115ba4169
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ic108311e09c56cc2b3db63d5850598b6896a7897
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: fix
Signed-off-by: Neale Ranns <nranns@cisco.com>
Change-Id: I3a21afef86990c1198ffcc47ffe2dba8a97125ee
|
|
Type: improvement
Change-Id: I7f28a3f03ab1ea8461c52743c61dc23a57965237
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Direct Verb allows for direct access to NIC HW rx/tx rings. This patch
introduce TX direct verb support for Mellanox ConnectX-4/5 adapters.
'dv' mode must be explicitely selected at interface creation to benefit
from this.
Type: feature
Change-Id: If830ba9f33db73299acdbddc68b5c09eaf6add98
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I3f287ab536a482c366ad7df47e1c04e640992ebc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Showing number of allocated chunks by size, in addition to the freelist chunks by size.
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I50f7b695a217f132d5f0b307182a34752d3fe1dc
|
|
Type: refactor
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I7a952fd95e49468a0d1c763b3e289648c93539da
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7f6f37ec6eed780322e2488d6eb0f5681945ba09
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
ICMP error messages are translated to ICMPv6 error messages with
erroneous destination address in the outer IPv6 header because sender
port is used instead of receiver port.
Both source and destination addresses in the inner IPv6 header are
translated erroneously because source and destination addresses of the
inner IPv4 header are getting zeroed during the translation.
With this commit, use receiver port for translation and save addresses
of the inner IPv4 header before translation of the inner header.
Type: fix
Change-Id: I1e93d54c1bbc154b401adcbb0fb661299655d01a
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5ec761bfcdc13a8238b83ff46c2f1c53ec0e79d8
|
|
Type: refactor
Change-Id: I761fc764e6771dc95eb64614479c27fd44016690
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
This fixes a bug in the initialization of handoff_out2in_index and
handoff_in2out_index where the node index for out2in was set to the
in2out node, and vice versa.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I983ddd3b3cec06f4cb3fb95b2a9cda4ab6d1270f
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I915dace4afe07ac3281f248ef7468fa5247c9668
|
|
Fixes 4 coverity issues
Type: fix
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
Change-Id: Ib3ef1df3e5d601d7751445ae1c9603bb6ce0f80c
|
|
Type: fix
Fixes: b49bc1a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3dd81a2484c8b4925fd07556576c29d1cde337e1
|
|
Patch changes the behavior of session scavenging and fixes multiple
nat issues. Allows proper session clearing and removes issue with lingering sessions
in session db. Patch also updates and fixes CLI/API calls for better readability
of session state metrics. Fixes security issue that would allow attacker to
reuse timed out session in both directions (in2out/out2in).
Type: improvement
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: I78897585a2a57291fad5db6d457941aa0a0457bd
|
|
Type: fix
fetch the sa_index from the correct location
Change-Id: I351035ee0226c47585995ff9122320fd5c73ec53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Improve dependency tracking on vapi_test directory so that vapi_c_test
rebuild doesn't force vapi_cpp_test rebuild and vice versa.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I00094c6374981333858ddbe6ae934cfda3b33a36
|
|
Type: improvement
Change-Id: I298bbb81c753d60288ac63bebf2bdfea323af68b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2426211f48b242e51aeb1edc87c1cd21c526dbfa
|
|
Add a clib_time_t * argument to clib_timebase_init(...), to encourage
client code to share the vlib_main_t's clib_time_t object.
Display the current day / date in GMT via the "show time" debug CLI.
Fix the test framework so it processes the new "show time" output format.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5e52d57eb164b7cdb6355362d520df6928491711
|
|
A partial revert of gerrit 25729. The last_run_time == 0.0 check is
necessary and remains in place.
Type: fix
Fixes: 3d9f134
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3d2c9f90b2bc867f02c4749a5b19f997b84185b9
|
|
DPDK provides two new APIs to retrieve information about the Tx/Rx
packet burst mode:
rte_eth_tx_burst_mode_get
rte_eth_rx_burst_mode_get
This patch leverages these two APIs to describe the tx/rx mode.
Currently, Intel X710/E810 and Mellanox Mlx5 support the new APIs.
For NICs that don't support the new APIs, still use the original way
to print their tx/rx function name
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibe47f5debe3b3f17f462fbf9834394e22845cc08
|
|
Type: fix
Fixes: 39e9428b90
VRRP unit tests fail sometimes for changes which have not touched any
code related to VRRP. There were some timing-related changes recently
which probably made the VRRP tests, which rely on a VR changing state
within a certain amount of time, start failing.
Set the VRRP tests to only run with the extended tests rather than
running by default. This is temporary so VRRP will not cause spurious
build failures while a proper solution is figured out.
Change-Id: I5826ea39b944dfb9b0ca4bdfa2ebbe86d269f935
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When logging is enabled, an empty line input (press Enter only)
will cause SIGSEGV. This patch fixes the problem by checking
the command length first.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Ib4cbd1c7bfd6a694e289d28958875c7d2356a93e
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: fix
Change-Id: I2c89accddf2307fa975b71e974d4091499f104ed
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Implements the uN behavior
Type: feature
Change-Id: Icb5efc560e09052cd183b468772cf7f799f81194
Signed-off-by: pcamaril <pcamaril@cisco.com>
|