summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-04-17vxlan:remove counters writeback cacheEyal Bari2-519/+242
+refactor decap loop to remove repetitions and goto's slightly improves performance in scale (3k-4k tunnels) tests (7-9 clocks) slightly deteriorates performance in single tunnel tests (3-4 clocks) Change-Id: I1a64ed0279c00481b61a162296c5a30f58bf29c4 Signed-off-by: Eyal Bari <ebari@cisco.com>
2018-04-17acl-plugin: VPP-1241: fix the "show acl-plugin tables applied" outputAndrew Yourtchenko2-45/+20
It is a relatively rarely used low level command for code that didn't change, but due to infra changes it did not survive. Having it working may be very useful for corner-case debugging. So, fix it for working with the acl-as-a-service infra. Change-Id: I11b60e0c78591cc340b043ec240f0311ea1eb2f9 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 18bde8a579960aa46f43ffbe5c2905774bd81a35)
2018-04-17igmp: fix debug macroJakub Grajciar3-13/+13
Change-Id: I071d4cfcf6ea9763dd4842a3594c486a8e400e8c Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-04-16Makefile: Removed clang build from verifyEd Kern1-7/+0
Removed clang build from main verify since that will be driven in a seperate job going forward Change-Id: I6efcad0b99fcc6babc4a7eb1475c99816f2cf175 Signed-off-by: Ed Kern <ejk@cisco.com>
2018-04-16Implement ip_probe_neighbor APIJohn Lo4-10/+135
Add API support similar to VPP CLI "ip probe-neighbor" except API call is asynch and will not wait, as the CLI does, for address resolution of probed neighbor. The API client can use the APIs want_ip4_arp_events or want_ip6_nd_events to get notified of the desired address resolution event. Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3 Signed-off-by: John Lo <loj@cisco.com>
2018-04-16session: use generic session pool for listenersFlorin Coras8-103/+42
Change-Id: I825f3822910a6ee368b9004e39ca16ac6833e30c Signed-off-by: Florin Coras <fcoras@cisco.com>
2018-04-15vhost: add vhost interface add/delete/dump API test cases to make testSteven3-0/+160
The vhost binary APIs for add/delete/dump interface were available long ago. But no unit tests were ever added in make test. This patch is to retrofit the missing unit tests. Change-Id: I489521b5ae359a1168ac5880a1f13a5f7e93ce4a Signed-off-by: Steven <sluong@cisco.com>
2018-04-13Revert "MTU: Setting of MTU on software interface (instead of hardware ↵Damjan Marion25-315/+246
interface)" This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa. Reverting as this patch is causing following crash: 0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails Aborted Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-13acl-plugin: VPP-1239: acl-as-a-service does not match IPv6 packets, works ↵Andrew Yourtchenko2-4/+5
only in lookup context 0 In process of extracting the matching out of the ACL plugin internals, a couple of pieces setting the miscellaneout fields in the 5tuple structure did not make it, so they are initialized to zeroes. Move the assignments to the right place to make both traffic acls and acl-as-a-service working. Change-Id: I66a7540a13b05113b599f0541999a18fad60385d Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit d3b96ef0d75889f09dc51efb89e5123cdbe7ffe8)
2018-04-13NAT66: Do not translate if packet not aimed at outside interfaceJuraj Sloboda4-0/+78
Change-Id: Id5a2a90d81cc9cb87cb6fb89ac2f4ca3cbcb51e2 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-04-13VOM: GBP: update subnet is type changesNeale Ranns2-5/+16
Change-Id: Ic04f419b9c09be34afc390e672793180d56c4665 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-13MTU: Setting of MTU on software interface (instead of hardware interface)Ole Troan25-246/+315
Change-Id: I98bd454a761a1032738a21edeb0fe847e801f901 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-13GBP V2Neale Ranns74-1168/+7570
update the GBP plugin to implement the full NAT feature set of opflex agent Change-Id: Ic06a039c889445ed0b9087fa1f292634192b0f8d Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-13bond: ping fails between l2 BD [VPP-1238]Steven4-15/+91
In dpdk based bonding, when the bond interface is configured for l2, it automatically sets the bond interface to promiscuous mode and sets rx redirect to ethernet-input. This allows traffic to be bridged to non compute node facing interface when it is received from the compute node interface. For native vpp bonding, we need to do similar things. When the bond interface is configured for l2, we set the slave interfaces to promiscuous mode and set rx redirect to ethernet-input because dpdk does not know anything about the bond interface. Likewise, when a new interface is enslaved, we also need to do the same thing if the bond interface has already been configured for l2. Change-Id: I7e168008e8a4221be74929b2a20e6db0ce8f3110 Signed-off-by: Steven <sluong@cisco.com>
2018-04-13Enable check of VRF reset - IPv4Jan Gelety3-71/+122
Change-Id: I60818a22f543f9a3c3f62f9c67f5e4239e5b045a Signed-off-by: Jan Gelety <jgelety@cisco.com>
2018-04-12VCL IOEvent external API callbackKeith Burns (alagalah)7-98/+373
Change-Id: I417357b00c43b27872aa3f681335bdc1ef574eca Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com> Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
2018-04-12export new VOM hpp post 11648Neale Ranns1-0/+1
Change-Id: I3e670c22b3b8a674c98ff30eb093c5c6ab873e53 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-12libmemif: fix clang compilation errors/warningsJakub Grajciar3-16/+15
Change-Id: I09444281a932d367162a10b90c3759db71c03350 Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2018-04-12Fixes for 'make UNATTENDED=yes CC=clang CXX=clang verify'Neale Ranns51-180/+215
Change-Id: I994649761fe2e66e12ae0e49a84fb1d0a966ddfb Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-12vom: Fix the itf stats replayMohsin Kazmi3-1/+39
Change-Id: Iedc6bbaa1c0a1c3c6e1b8ed6d67db28046a551f4 Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
2018-04-12fixes python3 TypeError; python2 intactAndrey "Zed" Zaikin1-1/+1
exception in vpp_api.vac_write(): "TypeError: initializer for ctype 'char *' must be a bytes or list or tuple, not str" Change-Id: Ib6bcfb86e6e36c557174979a110113af689c6754 Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
2018-04-12bond: 1 packet/frame == bad performance [VPP-1236]Steven1-6/+8
While https://gerrit.fd.io/r/#/c/11316/ took care of 1 packet/frame for most of the bonding modes, it missed the broadcast mode. This patch is to fix the 1 packet/frame for the broadcast mode. Change-Id: Iac48a2977c7f702f341479cc712a6448090dbc60 Signed-off-by: Steven <sluong@cisco.com>
2018-04-12NAT: disable CLI/API not supported in active mode (VPP-1234)Juraj Sloboda2-3/+215
When in deterministic mode disable nondeterministic CLI/API. When not in deterministic mode disable deterministic CLI/API. Change-Id: Ibf485c14612297e51d3815a6fde541542c8fe7ab Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2018-04-12Handle DHCP replies with NAT44 forwarding enabledMatthew Smith1-48/+57
When NAT44 forwarding is disabled, if a DHCP server-to- client packet arrives on an outside interface, it is handled correctly by setting the next node to the next feature on the ip4-unicast feature arc, where it can be processed. When NAT44 forwarding is enabled, if a DHCP server-to- client packet arrives, it is not handled any differently than other packets and ends up going to ip4-lookup which results in the packet being dropped. Move the check for DHCP server-to-client packets outside of the block that is executed if forwarding is disabled so DHCP replies will be processed in either case. Change-Id: Ia795cce3fd459f3252c2c17d53bb88ceaeaafca4 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-11VPPAPIGEN: Consistent CRC32 on complete file.Ole Troan1-17/+25
Prior to this fix vppapigen would just do a crc32 on the Python representation of the file as a set of dictionaries. That of course was not a good idea. Change-Id: Ie454736ffec02fa4679ab27e684b1d6c6406a0f1 Signed-off-by: Ole Troan <ot@cisco.com>
2018-04-11Clean up temp dir in failure casesDave Barach1-0/+3
Change-Id: Icfb99a09726c01e96ff14967afbafa4116e02eff Signed-off-by: Dave Barach <dbarach@cisco.com>
2018-04-11fix: sample vpp-api C client hangs vpp daemon because of NULL callbackAndrey "Zed" Zaikin1-4/+3
Change-Id: I686254b332a4527cb0cad3c5c0a17ea4c9f40e1d Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
2018-04-11NAT44: fix setting of flag SNAT_SESSION_FLAG_LOAD_BALANCING (VPP-1235)Matus Fabian4-24/+36
Change-Id: Ieeafb41d10959700bfd434cd455800af31944150 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-04-11acl-plugin: VPP-1231: add error checking to acl_plugin_set_acl_vec_for_contextAndrew Yourtchenko1-1/+26
The users of ACL lookup contexts might not check the data they supply, so do it on their behalf in this function, and return an error if an ACL does not exist or if they attempt to apply the same ACL twice. Change-Id: I89d871e60f267ce643f88574c83baf9cd0a2d7b3 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit e5cbccf35f4d230afafa633abbc88e64ef33d758)
2018-04-11acl-plugin: VPP-1230: fix the "undefined symbol" error for acl_main when ↵Andrew Yourtchenko3-9/+31
using the inline functions The acl_main struct, which is defined in the acl_plugin, is not visible when the ACL plugin inline code is being compiled within the context of other plugins. Fix that by using the global pointer variable, which exists in both the ACL plugin context and is set in the context of the external plugins using ACL plugin. Change-Id: Iaa74dd8cf36ff5442a06a25c5c968722116bddf8 Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> (cherry picked from commit 1286a15a6e60f80b0e1b349f876de8fa38c71368)
2018-04-11dpdk: fail in early init if we cannot alloc hugepagesDamjan Marion1-4/+19
Change-Id: If536ae142dc0109b587d92981d337bc6f15e070a Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-10test: Fix issues with new version of pycodestyle (VPP-1232)Chris Luke3-3/+5
- Ignore warnings W504 (newline after binary operator) which otherwise occurs a significant number of times. - Fix two instances of lines >79 chars. Change-Id: I8cef56f8afc237187995e638e610c8c0554e2bb5 Signed-off-by: Chris Luke <chrisy@flirble.org>
2018-04-10Makefile: Added new ifeq to cover opensuse leap15Ed Kern1-4/+9
So current makefile covers opensuse tumbleweed and current opensuse leap 12.3. Neither of these cover new leap 15 package naming. Cannot only use Name or ID do to release differences. Change-Id: I7ffcabb3a5af5b0789ba827209355050f6dc5204 Signed-off-by: Ed Kern <ejk@cisco.com>
2018-04-10when deleting l3 static mapping with addr_only,ahdj0071-1/+4
lb session with the same user maybe deleted. Change-Id: Ie58579cf4f8babb594f3c44aa185720134c58c3d Signed-off-by: ahdj007 <dong.juan1@zte.com.cn>
2018-04-10CSIT-895 dpdk/ipsec: add locks on session data hash updatesRadu Nicolau2-33/+40
Change-Id: I6400b77de388c01e85209e5dc5f11ccafb79a459 Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
2018-04-10srv6-ad: fixing cache size issueFrancois Clad3-11/+18
Change-Id: Iaadfbc75832e37ae52511b25448da14116214fc1 Signed-off-by: Francois Clad <fclad@cisco.com>
2018-04-10Make IPsec tunnel intf work with IPv4 output featuresMatthew Smith2-0/+13
With no IPv4 output features on an IPsec tunnel inferface, when packets are forwarded to that interface, they reach the ipsec-if-output node via the output_node_index on the hw interface and they are handled correctly. When an IPv4 output feature (e.g. output ACL, outbound NAT) is enabled on an IPsec tunnel interface, outbound IPsec stops working for that interface. The last node in the ip4-output feature arc is interface-output. From there a packet is sent to ipsec<N>-output, and then ipsec<N>-tx. The tx function for an IPsec tunnel interface that is called by ipsec<N>-tx is a dummy that doesn't do anything except write a warning message. Enable a feature on the interface-output feature arc for an IPsec tunnel interface so the ipsec-if-output node is reached from the interface-output node. Change-Id: Ia9c73d3932f5930ec7ce0791a0375b1d37148b01 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2018-04-09features: don't break linked list, create separate one for arcDamjan Marion4-14/+16
We need to keep original linked list so destructire can remove entries. Change-Id: I5ff5ca0e1a417d88707255207725bba46433c943 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-09L2: no-flood interface type in the Bridge-DomainNeale Ranns5-11/+42
Change-Id: I50ff0cacf88182f8e0be19840c50f4954de586e2 Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-09plugins: unload plugin if early init failsDamjan Marion12-5/+215
Change-Id: I32f68e2ee8f5d32962acdefb0193583f71d342b3 Signed-off-by: Damjan Marion <damarion@cisco.com>
2018-04-09NAT44: don't add static mapping to resolution vector if failed (VPP-1225)Matus Fabian1-3/+27
Change-Id: I71660eb327124179ff200763c4743cc81dc6e1c6 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2018-04-09jvpp: log error output of Java process on test failureMarek Gradzki1-3/+6
helps troubleshooting JVpp test failures. Change-Id: I4747832a0610ace168285bfe423c506ba4e00700 Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
2018-04-09Autodetect plugin pathDamjan Marion4-16/+61
dpdk plugin self-disables if there are no hugepages available Change-Id: Ib286e1a370deeb21248e6e961573ef9c68759b4c Signed-off-by: Damjan Marion <damarion@cisco.com> Signed-off-by: Dave Barach <dave@barachs.net>
2018-04-09DVR: save the rewrite length in packet meta-data for featuresNeale Ranns1-3/+9
Change-Id: I0efd03bdb84bc9ff2334d398bfdb82486228114a Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
2018-04-09make test: fix failure on centosKlement Sekera1-1/+1
Change-Id: I1fcc742699a60ef99ce97b35f7b964ee6ad29ddf Signed-off-by: Klement Sekera <ksekera@cisco.com>
2018-04-08Restore building of debuginfo RPMsThomas F Herbert1-10/+2
JIRA: VPP-1227 Remove rpm tmp dir build debuginfo rpms. Reverses commits to fix a build problem with old versions of rpmbuild that prevented builds in chrooted environments with short paths and short project names. Change-Id: I852696dccc984bf4882fd3ca9ec4c8da080bdb41 Signed-off-by: Thomas F Herbert <therbert@redhat.com>
2018-04-08Remove subunit from Centos requirements.Thomas F Herbert2-2/+4
JIRA: VPP-1229 Subunit and Subunit-devel in Fedora and Epel but not Centos. This patch moves the Fedora from the Centos specific requirements. Change-Id: I093a4571cddf14af5ee2827ba8ee00c7bcbe6fc0 Signed-off-by: Thomas F Herbert <therbert@redhat.com>
2018-04-07BIER coveroty fix for unintialised return value on errorNeale Ranns1-1/+1
Change-Id: I2b1d1035f810cb58356626cf081d46eb289265b4 Signed-off-by: Neale Ranns <nranns@cisco.com>
2018-04-06Change l2-fwd node to allow possible feature before UU-FLOODJohn Lo1-6/+14
If l2-fwd node does not find an L2FIB entry for DMAC of packet, use input feature bitmap to find next node instead of always sending packet to l2-flood node to perform unknow unicast flood. It provides possibilty of using other feature to forward unknow unicast packet instead of flooding the BD. Change-Id: I56b277050537678c92bd548d96d87cadc8d2e287 Signed-off-by: John Lo <loj@cisco.com>
2018-04-06Remove mbedtls from build requirement for CentosThomas F Herbert2-2/+4
Although mbedtls is in Fedora and Epel, it is not in Centos yet. It is not strictly necessary for TLS which also can use openssl. Change-Id: Id62d52000f9ecda2fc10d1938f02be1142fa5bdb Signed-off-by: Thomas F Herbert <therbert@redhat.com>