Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I26087cbde40cc5f2f1cb501ca6e791292e02badf
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I0755f731b1b01e6a1a231948d498c625a2c966b7
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
The command set interface placement is supposed to remove the existing
interface placement and add a new interface placement based on the given
options. My quick test for the CLI shows that the old interface placement
continues to exist. But the new interface placement is also added.
The bug exists in vnet_device_input_unassign_thread which checks
the old thread index is the same as the passed thread index and skips the
deletion if they are the same.
The fix is to remove the check which is not supposed to be there.
Change-Id: Ib055721fad47513949a03b3cb6dc292bd19fd1e8
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I9a6bcb7d173a2c13d89784e7ff8a6e42dcee201f
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ic07ec5d4c2560a414d5f4f7eb37e10faf591664a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If98355bebe823f45b11b0908a8d7700ab273a6db
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic16bc10d0b2877b2afdf052615f9334f31b9519f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
This pathch deprecates "show dpdk placement" and
"set dpdk placement" CLI commands.
Change-Id: I4e052ec3e8b8e6c54b4816e1e689e5b7a24892db
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id9cc1fbe18099fae483a823dc7c2b16d6bc46a8c
Signed-off-by: jerryian <gu.jian1@zte.com.cn>
|
|
- Add cpu index to the vring structure for quick lookup
- Reduce the code that needs to be protected by
vlib_worker_thread_barrier_sync
- Set minimum timer no less than 1 ms
Change-Id: Iafef4bf6879a8efb350abf4e0f517e38f7ff7a8b
Signed-off-by: Steven <sluong@cisco.com>
|
|
epoll was supposed to not sleep when timeout
is less than 1ms, but a typo made it not sleep
any time the requested timeout is lower than
1000 seconds (in practice, never...).
This patch replaces "1e3" with "1e-3", which
represents 1ms.
Change-Id: I731851b27a6bf6ab8e41586e017e94b962b09bf3
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
(cherry picked from commit ec06222ae189fe8d84b63410130fff04bf446573)
|
|
Change-Id: I71f34dc64d4ddc5f2ec1164cb3c353d0fe2d95ab
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Add code which checks if vpp doesn't crash/exit immediately after
startup to aid debugging stuff like mistyped graph node name or so.
Refuse to run tests if the vpp is unable to start, complain loudly
and print vpp's stderr at critical log level if this happens to make
spotting these problems in jenkins easy.
Change-Id: I40d3fbd05c822c0534713bae6bef05ecfb0e0c1d
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I23b588eb56a3f5690158449a1f9bc8053cd3d251
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icd25ec2e5faf69898178199aa44f21790ce664e1
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I691d1bfb2923a07c0003485b1d0272aaf9ed27ee
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Set rxmode.enable_scatter field in DPDK port config parameter so ENIC
driver will use multiple mbuf's for receiving jumbo packets.
Also remove ENIC driver check to disable setting ENIC MTU as this
capability is now working with the new ENIC driver, subject to 9002B
limit.
Change-Id: I563976201c4968d4538c0759505cef2de876934a
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Icf7420b7ee212e9341f63f005dc287d019fd8e4c
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
1 - interface-DPO
Used in the Data-plane to change a packet's input interface
2 - MPLS multicast FIB entry
Same as a unicast entry but it links to a replicate not a load-balance DPO
3 - Multicast MPLS tunnel
Update MPLS tunnels to use a FIB path-list to describe the endpoint[s]. Use the path-list to generate the forwarding chain (DPOs) to link to .
4 - Resolve a path via a local label (of an mLDP LSP)
For IP multicast entries to use an LSP in the replication list, we need to decribe the 'resolve-via-label' where the label is that of a multicast LSP.
5 - MPLS disposition path sets RPF-ID
For a interface-less LSP (i.e. mLDP not RSVP-TE) at the tail of the LSP we still need to perform an RPF check. An MPLS disposition DPO performs the MPLS pop validation checks and sets the RPF-ID in the packet.
6 - RPF check with per-entry RPF-ID
An RPF-ID is used instead of a real interface SW if index in the case the IP traffic arrives from an LSP that does not have an associated interface.
Change-Id: Ib92e177be919147bafeb599729abf3d1abc2f4b3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I4e3df197eed33acbceaff495279def8716773303
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I2d1c5e4dbdcab2a81d6c88801183ca0bbc83e1d9
Signed-off-by: flyingeagle23 <wang.hui56@zte.com.cn>
|
|
(VPP-682)
This fixes the previously-implicit "drop all non-first fragments" behavior
to be more in line with security rules: a non-first fragment is treated
for the purposes of matching the ACL as a packet with the port
match succeeding. This allows to change the behavior to permit
the fragmented packets for the default "permit specific rules"
ruleset, but also gives the flexibility to block the non-initial
fragments by inserting into the begining a bogus rule
which would deny the L4 traffic.
Also, add a knob which allows to potentially turn this behavior off
in case of a dire need (and revert to dropping all non-initial fragments),
via a debug CLI.
Change-Id: I546b372b65ff2157d9c68b1d32f9e644f1dd71b4
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 9fc0c26c6b28fd6c8b8142ea52f52eafa7e8c7ac)
|
|
Change-Id: I97e03d98758a08b1f75a9a1f35f0181385a10ae8
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
|
|
- single-hop BFD: attach a delegate to the appropriate adjacency
- multi-hop BFD [not supported yet]: attach a delegate to the FIB entry.
adjacency/fib_entry state tracks the BFD session state. when the state is down the object does not contribute forwarding hence and hence dependent objects will not use it.
For example, if a route is ECMP via two adjacencies and one of them is BFD down, then only the other is used to forward (i.e. we don't drop half the traffic).
Change-Id: I0ef53e20e73b067001a132cd0a3045408811a822
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- update default flags
- add missing flag learn
Change-Id: I50a1a001848769836468838775b59d3414d27710
Signed-off-by: Choonho Son <choonho.son@gmail.com>
|
|
This patch deprecates stack-based thread identification,
Also removes requirement that thread stacks are adjacent.
Finally, possibly annoying for some folks, it renames
all occurences of cpu_index and cpu_number with thread
index. Using word "cpu" is misleading here as thread can
be migrated ti different CPU, and also it is not related
to linux cpu index.
Change-Id: I68cdaf661e701d2336fc953dcb9978d10a70f7c1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
when tunnel is deleted reply should include the tunnel's sw_if_index
instead of ~0
Change-Id: Ie5e04f4feab9cf2c90f0e155ec0fb9ca839a956d
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I0a6989c6963956f3e60e8c50835c57845fccef8c
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Make BFD ARP-aware when sending out packets.
Fix a few one-liner bugs discovered while integrating with cisco
nexus. Enhance CLI view to better observe session state.
Change-Id: I266c29492f351207b84328ab665d9d697969da9c
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Id15b401223aabe7dacb7566c871ebefc17fbb1fc
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 7fd3f513c7df198c45204eba0a3e9a3abe509593)
|
|
Change-Id: I935620798d6fe82b99b6bd564749e20a189b4ae3
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: Ic7128d4f8a13c021e0fd4731a717193d050431d2
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
|
|
Change-Id: Ib83baf6ddec4ac192f6b4123d9eb599fb370fd0c
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I190696da5555c05074ee0eee32eb914bd16e38fb
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Refactors the GRE node to work with both IPv4 and IPv6 transports.
Note that this changes the binary configuration API to support both
address families; each address uses the same memory for either
address type and a flag to indicate which is in use.
The CLI and VAT syntax remains unchanged; the code detects whether
an IPv4 or an IPv6 address was given.
Configuration examples:
IPv4 CLI: create gre tunnel src 192.168.1.1 dst 192.168.1.2
IPv6 CLI: create gre tunnel src 2620:124:9000::1 dst 2620:124:9000::2
IPv4 VAT: gre_add_del_tunnel src 192.168.1.1 dst 192.168.1.2
IPv6 VAT: gre_add_del_tunnel src 2620:124:9000::1 dst 2620:124:9000::2
Change-Id: Ica8ee775dc101047fb8cd41617ddc8fafc2741b0
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
|
|
Change-Id: Ic5bd7da08f8a46b548d56516e4633f0b8badf2a1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I16606757176649e61f0a51895329586311144766
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic2d33b31ba88f6d9602a22439865637d98cf4a33
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Ibc293aa1305126920c0b2c44df1f7a7d5ae9ea9d
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I24577bd32ae23fbe8515cc8d960eab5448ce3b5c
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I48bf6c46d78773669e76dc4749be3b1af80782f4
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Increased time intervals mean longer test runs, but also reduce
the chance of getting annoying (especially in gerrit) random failures.
Now that tests are split into `basic' and `all', the increased runtime
of BFD tests (of which majority doesn't run in basic case) doesn't
matter too much..
Change-Id: I4a15bb4facad634f123bc9cc6f45eddbf4976fd1
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Create an elog_merge utility, extracted from test_elog.
Change-Id: Ide137b4858c88b3a2885583b7fbb15ddc4963af9
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iee6016757e45c832e8868f0bdcfd4192dd3380c8
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I844ec53b55ceaa1e00996f5cf8a018537ea8b481
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
- update of CSIT operational branch to be used for VPP-patch test
Change-Id: I4bf32bc12c7417f7c19b23287a2b2899eb8fb02d
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
Change-Id: I2a1246061e57c4caae0a1a1b861c459d115860cd
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I316862e1d33e5d10c058317cc4827304e55ceba4
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I03195a86c69f84a301051c6b3ab64456bbf28645
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
- added persist timer
- update rcv_las whenever sending an ack
- moved fifo size to its own cache line
- improved session and builtin client debugging
Change-Id: Ia649cf942cf0c061a713e8b67f0eb6974a6cd55b
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|