Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ie0eb0127affd3d771d19bb7c60e79c31858d82cd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I1f7c634328f25b33580a215af2daeb498cd3b181
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Iaa28f96d613d6fb75bd29958d757de206448eb22
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Due to union, l2 sub-interface bits were wrongly set
causing sporadic misconfiguration of l2 mode on some
interfaces.
Change-Id: Id77ee281e3a0030878641a786c22ffe16ce1c759
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Clean up default and vpp_api_test custom private api segment allocator
ring configurations.
Change-Id: I145b6d64ba0a6315b5ccb07909c8256eeb772146
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
It is much cheaper to use ctzll than to do shift,subtract and mask
in likely case when we are looking for 1st set bit in the uword.
Change-Id: I31954081571978878c7098bafad0c85a91755fa2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6306b81e0e1c3e1c591f929a76bb265c1c1d0859
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic5304749935f69018eb00183bb4670bb9f16273c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The pointer to IP header was derived from l3_hdr_offset,
which would be ok, if l3_hdr_offset was valid. But it does not
have to be, so it was a bad solution. Now the previous nodes
mark whether it is a IPv6 or IPv4 packet tyle, and in esp_decrypt
we count get ip header pointer by substracting the size
of the ip header from the pointer to esp header (which lies
in front of the ip header).
Change-Id: I6d425b90931053711e8ce9126811b77ae6002a16
Signed-off-by: Szymon Sliwa <szs@semihalf.com>
|
|
When a DHCP client is in the bound state, it wakes up
halfway through it's lease (by default) to try and renew
the lease. The ip4-dhcp-client-detect is not enabled as
a feature at this point, so replies sent from the DHCP
server do not get applied to the lease. Eventually the
lease expires, the address is removed from the interface,
a new discovery is performed and the same address is added
back to the interface.
Before sending a request to renew in the bound state, enable
the feature to process the reply.
Change-Id: I95332ee0596f47df6f3c8bf8e3f0698dde9a1fc5
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Id02d613b8613a2d448840fe2d6a5e3b168a3c563
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1c8a14d4d51aa730f0edcf491e3c4725e2d8bd66
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I921465ea64b59d42674cc8f19069ed04e3b25026
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I3669068f694614f8555b33bf0b703c41e45363ef
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I65c12617ad49e4d5ef242e53988782f0cefa5684
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- rework the function to declutter and avoid building more than one tx
frame
- add dual loop although benefits in my tests seem to be minimal
- improve tcp/udp echo external apps. They have slightly better
throughput than internal echo apps.
- udp bugfixes
Change-Id: Iea4a245b1b1bb407a7f403dedcce2664a49f774b
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ifea9c772e8784642433b92091f5769eb9ec06890
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I387b22427b3f322969bcf32fcfc189123c8ed6ae
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: Iba1cc1179ee80478e29888790a6476571d1904dc
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I4bb582d55b1071d3581155eb158995ca5153ba3c
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I16557189aa4a763ec496cb4a45f6e12f2d46971f
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1c49a12ef7fa7bd0046f1a420b01c1654b6d21ec
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
Change-Id: I2b50e3fc06b4e905395d4706083f12ebc76826ce
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I9937912cd760698e39044e8ae022a90b58c8db30
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I2896dbde78b5d58dc706756f4c76632c303557ae
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ic1e189c22e3d344d165e0eab05ccb667eef088a9
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
|
|
Change-Id: Icf1a30c9df4d3298407c00383020debe99acdbff
Signed-off-by: Thomas F Herbert <therbert@redhat.com>
|
|
Change-Id: I9363cf54b73f7cfd8622af6f1cb250438ea0d3b6
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
- Same makefile will be used to support DPAA1 and DPAA2 platforms.
- Support added to have both on Host compilation as well as Cross compilation.
- If Cross compiling, by default NXP cutomized toolchain "aarch64-fsl-linux" will be used.
To use Linaro toolchains, please set env variable CROSS_PREFIX.
Like: export CROSS_PREFIX=aarch64-linux-gnu
- Added CPU_MTUNE to modify xxx_mtune , if CPU is not A72 which is default.
- You may set DPDK_PATH to dpdk installation folder, if wish to use locally compiled DPDK.
- In case of Cross compilation, OPENSSL_PATH will be required to include OPENSSL libs.
Change-Id: I9057dfc57522b60e306810f684b3085bfccf85e9
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
|
|
Object sizes must evenly divide alignment requests, or vice
versa. Otherwise, only the first object will be aligned as
requested.
Three choices: add CLIB_CACHE_LINE_ALIGN_MARK(align_me) at
the end of structures, manually pad to an even divisor or multiple of
the alignment request, or use plain vectors/pools.
static assert for enforcement.
Change-Id: I41aa6ff1a58267301d32aaf4b9cd24678ac1c147
Signed-off-by: Dave Barach <dbarach@cisco.com>
|
|
When Cross-compiling VPP for arm64 target and build machine is x86_64,
based on build_cpu value, the march variable is set to corei7 which is
an unrecoganized option for ARM tool chain.
This breaks the VPP compilation.
Change-Id: I4cba5b4990e7cf0bdc1403e90c3d18110900bbef
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
|
|
This patch addresses the changes in the JDK to build headers (javah no
longer available)
Change-Id: I3e94b1cf97c8c474535c26b75ea08379338fe0af
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Output string 's' was not assigned the return value of format() for
the destination address, which, in case the underlying memory was moved
by the realloc, resulted in an invalid memory access by the subsequent
invocations of format().
Change-Id: I2b5dfd85db085c553ca5ec0b3257aeeb437c360a
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I8d54415972d6644190857175b0e895c5319ce7b6
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Static mappings with equal local and external IPs
but different ports were dumped as identity mappings.
Change-Id: Ifea7cef5b78aea4c2eb31cf1620185eeef2681e5
Signed-off-by: Milan Lenco <milan.lenco@pantheon.tech>
|
|
Change-Id: I565d79af410825c72f291ab40178883b1bc6f1df
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: If379247f0574fbfcca39e752684bf6c81b95187b
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
When a packet with an unknown proto arrives
on an inside interface and there are no existing sessions
for the source address, a segv occurs.
snat_in2out_unknown_proto() finds the head of the sessions
dlist, fetches the address of the next element using
head->next, and then dereferences the next element. On the
first packet received from a source address, head->next is
~0, so this results in a segv.
Check that the session list is not empty before trying to
traverse it.
Also removed unnecessary lookup against tsm->user_hash.
Prior call to nat_user_get_or_create() already performed
that lookup and added a user if one didn't exist.
Change-Id: If73e79aa2f8e3962ab7b876ecf55aea40d7a5472
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
If sessions are not preallocated, the rx retries counters are not
correctly validated/initialized
Change-Id: Iaf7456f3a0e2181fcea0c370613d694f8e98276d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Two vxlan union/struct initializations caused gcc on
CentOS 7 to puke. Modified them to make the build
work again.
Change-Id: Iad667444b86cfde5ee4329993b520028d3b593ad
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: Ibcae49ab106efa9cd0ff60be60904ac5a2fc0b65
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
moving the rewrite into the tunnel struct
Change-Id: Iec74b48e13456d32957e826cffb5ea35a8ebd1a0
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I906e58b4f9827a79a6ab673f8fa2e03036c69820
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ide4e2d2a06dff20c94ae5436ba6361b246052867
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I54a00686a7f3a61f583a5f701a0ab6c5480a455b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I2d39e56ff605e3a24927d6330d65d0406f588381
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I0f24e0f0fde0568161edf52f40c5b83877ed7130
Signed-off-by: Chris Luke <chrisy@flirble.org>
|
|
Change-Id: If33854f9c32736edf571fb66cdfa759db1c9de25
Signed-off-by: Szymon Sliwa <szs@semihalf.com>
|
|
Change-Id: Id9bad9a2fd99d22296a705ab08d1daedc3fef5c1
Signed-off-by: Florin Coras <fcoras@cisco.com>
|