summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-02-14crypto-native: refactor CBC codeDamjan Marion5-606/+446
Type: refactor Change-Id: I61e25942de318d03fb3d75689259709d687479bc Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-13nsim: fix quad-loop packet traceDave Barach1-11/+12
Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I756170bd799d1f482186cbb4b5dff9373ae6e08f
2020-02-13vcl: clear accept msg flagsFlorin Coras2-1/+1
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idb513232e7b091c8f767726bfa1deb10a7e3b751
2020-02-13vrrp: add plugin providing vrrp supportMatthew Smith19-0/+6912
Type: feature Add a new plugin to support HA using VRRPv3 (RFC 5798). Change-Id: Iaa2c37e6172f8f41e9165f178f44d481f6e247b9 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-02-13vppinfra: add 128-bit and 512-bit a ^ b ^ c shortcutDamjan Marion4-18/+33
This allows us to combine 2 XOR operations into signle instruction which makes difference in crypto op: - in x86, by using ternary logic instruction - on ARM, by using EOR3 instruction (available with sha3 feature) Type: refactor Change-Id: Ibdf9001840399d2f838d491ca81b57cbd8430433 Signed-off-by: Damjan Marion <damjan.marion@gmail.com>
2020-02-13vcl: handle close after resetFlorin Coras2-10/+32
Can happen if a connection is reset before fully accepted. Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I0ae68d71b66722dd19ca6f1cee44a080e5ff4447
2020-02-13crypto-native: add AArch64 AES-GCM native implementationDamjan Marion7-55/+78
Type: feature Change-Id: I4f96b0af13b875d491704b010328a1814e1dbda1 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-13dpdk: Add iova-mode to startupVladimir Ratnikov1-1/+2
In some cases of using vfio-pci driver, it should be required to enable pa or va mode. Without it, rtl_eal_init unable to allocate memory required. Debugging told that iova-mode pa/va could help. And it helps. This patch allows to pass iova-mode to vpp startup.conf Type: feature Change-Id: I36b87f5d3d141891b37cda2c306d50433954a34a Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
2020-02-13fib: Fix some more realloc errorsNeale Ranns5-55/+34
Type: fix Change-Id: I6011f5d6eae79019d3c16a260a9bedf0a76d2151 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-13ikev2: Responder honours the protected tunnel configNeale Ranns2-0/+10
Type: feature Change-Id: Iee84f94c617c53658f13c5430b945568c5e06ce9 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-13crypto-native: add AArch64 ghash supportDamjan Marion1-1/+23
Type: improvement Change-Id: I1f204685ea9374389fc24fc53184ce06806beed3 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-13vppinfra: add cmake option to grow vectors by 1Dave Barach3-0/+13
For debugging. Do not set this option in production. Type: feature Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I5e59671c4932e064bc087b85bf9c62c6f3bf48cf
2020-02-12classify: fix "show classify filter" debug CLIDave Barach1-3/+1
Null pointer bug, memory leak. D'oh! Type: fix Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ic2865757ed9cbb7f48d23c7c30b64299eb5f6674
2020-02-12vppinfra: add clib_prefetch_load and clib_prefetch_storeDamjan Marion1-0/+12
For people tired of typen CLIB_CACHE_LINE_BYTES.... Type: improvement Change-Id: I7658a8525ff6e3edc81a29b05a6fda33e537806e Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-12vppinfra: add ARM NEON implementation of u8x16_word_shift_{left,right}Damjan Marion1-0/+12
Type: improvement Change-Id: I310e421513e9d3f96ad7debc72c9407e231962b8 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-12tcp: improve invalid packet handling in syn-rcvdFlorin Coras2-4/+14
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie356b4d45d47e30c185caf2e66cdb16f1a97046f
2020-02-12tcp: move connections to wrk ctxFlorin Coras3-58/+50
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I06cc3f032a72eacc716eed8d6fe8856a2839def1
2020-02-12crypto-native: fix ghash function namingDamjan Marion1-6/+6
Type: refactor Change-Id: I1d594af6d7c0d065d5c2decc5b22d549189b1882 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-12crypto-native: use and instead of blendDamjan Marion1-4/+1
Faster and more portable... Type: improvement Change-Id: I915f8d3c45d1ba76ddfdbfac98482b04c98d148b Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-12crypto-native: add missing static_always_inlineDamjan Marion1-6/+6
Type: improvement Change-Id: Ibfa756f5f489882bc2ac658ae4d238e98da73875 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-12tcp: postpone rst handlingFlorin Coras3-71/+133
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Id09fa54cc5657b3b5616ea6a6180c1344b0141d4
2020-02-12crypto-native: refactor GCM code to use generic typesDamjan Marion3-291/+325
Type: refactor Change-Id: I76733a9ed362ec60badd22c0fbc2a9c5749da88d Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-12api: do not truncate api dump file sizeBenoît Ganne1-1/+1
Type: fix Change-Id: I5c81d2f55057f5fba780cb12154a3fb1aef79f20 Signed-off-by: Benoît Ganne <bganne@cisco.com>
2020-02-11vppinfra: remove the historical mheap memory allocatorDave Barach18-2195/+14
The mheap allocator has been turned off for several releases. This commit removes the cmake config parameter, parallel support for dlmalloc and mheap, and the mheap allocator itself. Type: refactor Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I104f88a1f06e47e90e5f7fb3e11cd1ca66467903
2020-02-11misc: fix coverity warningsDave Barach4-9/+19
Type: fix Ticket: VPP-1837 Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: I6b1ea13fc83460bf4ee75cb9249d83dddaa64ded
2020-02-11ikev2: Configure a profile with an existing interfaceNeale Ranns7-30/+141
Type: feature ... rather than always creating a new interface. Change-Id: If8a22ad5a8a3a4e511bea7cab7d8bbf7e6af9433 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-11crypto-native: fix ARM compilatiion flagsDamjan Marion1-1/+1
Type: fix Change-Id: I3b39c17d9cfadc1d383d9c4dba9029ea279d09d7 Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-11vppinfra: add ARM cpu typesDamjan Marion1-0/+4
Type: improvement Change-Id: Ib2cb708fdcb14fdea9298c10d67f8fe73887f18b Signed-off-by: Damjan Marion <dmarion@me.com>
2020-02-11ipsec: add support for chained buffersFilip Tehlar17-351/+1376
Type: feature Change-Id: Ie072a7c2bbb1e4a77f7001754f01897efd30fc53 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-11session: avoid scanning new io list under loadFlorin Coras2-21/+51
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Idaa7cc26ad941be86daec4ed5920727237712f4a
2020-02-11vppinfra: remove unused variable from timing wheelKlement Sekera2-4/+0
Type: fix Change-Id: I77b03efcac04cc46550d03657464ab8de5d7da78 Signed-off-by: Klement Sekera <ksekera@cisco.com>
2020-02-11http_static: VPP web application HowToDave Barach2-1/+275
This sketch should save a lot of time working out uninteresting but important details. Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Icd5705230adfda6539360ef3c46ff3a68b3bed74
2020-02-11sr: update NH value for Ethernet payloadspcamaril12-38/+39
Upon encapsulation of L2 frames, IETF has replaced the NextHeader value from 59 (IPv6 No Next Header) to 143 (Ethernet). https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml Type: fix Signed-off-by: pcamaril <pcamaril@cisco.com> Change-Id: I88aa5590c81d16700ff7a0bbe6337e113179496e Signed-off-by: pcamaril <pcamaril@cisco.com>
2020-02-11tls: refactor picotls ctx_read process to improve CPSSimon Zhang2-58/+55
Type: refactor Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com> Change-Id: I2bb675b4df3c4151f4b0791efcfe05b1d0f87a33 Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
2020-02-11svm: numa awareness for ssvm segmentsFlorin Coras4-26/+70
Type: feature Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I999836a7893a89aac5243b111eac35fddd03e2a6
2020-02-11ip: fix ip-local errorsFlorin Coras4-5/+6
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Ie8bc5c9a03e858487cf565b4e9b520e6b496337a
2020-02-11vlib: Skip core 0 if workers are configured.Jon Loeliger1-0/+15
According to the description in the startup.conf, the assignment of worker threads starts with the lcore following the main_lcore. A non-zero skip_cores will correctly achieve this assignment. However, prior to this patch when workers are assigned, the code picks up and assigns core 0 even thought it shouldn't. This patch determins if a non-zero number of workers are desired and if so, marks CPU unavailable for a worker assignment. Type: fix Change-Id: I1fdf73a6f218dcbf146fda2efc90c553f7cd6d20 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2020-02-11tcp: fix input error countersFlorin Coras1-17/+30
Type: fix Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I87940d02813b66616f1944e41b16c8cc16f5dac0
2020-02-10tcp: add option to avoid endpoint cleanupFlorin Coras2-2/+4
Type: feature If set, avoid trying to cleanup the local endpoint table. Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: Iaa382ae74523d608217d2d17544bf1e7d82b2728
2020-02-10vppinfra: use vm memory allocator for numa mappingFlorin Coras6-50/+21
Type: refactor Signed-off-by: Florin Coras <fcoras@cisco.com> Change-Id: I13b239cd572ae6dfaec07019d3d9b7c0ed3edcfa
2020-02-10ipsec: fix AES-GCM block sizeDamjan Marion1-3/+6
Type: fix Change-Id: I0c9640dab2c0eaba369bc8f3ff7ae56d8e97e170 Signed-off-by: Damjan Marion <damarion@cisco.com>
2020-02-10vlib: properly configure main thread's core idJon Loeliger1-0/+2
Prior to this patch, the main thread's core id was always reported as 0. This patch makes a call to vlib_get_thread_core_socket() on the main thread so that its core id is set properly. Type: fix Fixes: 5d64c7868f67749a6c99eb4ee5998b518ab6c71c Change-Id: I019cb95eec031da25197e48d956038c4bd6b5040 Signed-off-by: Jon Loeliger <jdl@netgate.com>
2020-02-10misc: add FEATURE.yaml filesDave Barach4-0/+47
For src/vnet/classify, src/vnet/cop, src/vnet/pg, and src/vlib/unix Type: docs Signed-off-by: Dave Barach <dave@barachs.net> Change-Id: Ib6ab734608693a1e9562a44808246950616e8d36
2020-02-10sctp: API cleanupJakub Grajciar2-26/+30
Use consistent API types. Type: fix Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com> Change-Id: I344ff299e2a20552450d82064c86aecb4403a71d Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
2020-02-10ip-neighbor: fix MLD reports not being sentNeale Ranns2-4/+34
Type: fix Change-Id: I8f81cd6c29ff8cb4f0b4850b8b1f6611d89ddb38 Signed-off-by: Neale Ranns <nranns@cisco.com>
2020-02-10ikev2: better loggingFilip Tehlar5-187/+317
Type: refactor Change-Id: Iedcb24684c54f4d78583ab3aa3db1097e73df248 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-10ipsec: remove dead codeFilip Tehlar1-29/+0
Type: style Change-Id: Ifda9597bf4aee89cf1dfd287429a2772fed8f535 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2020-02-10ip: more detailed show reassembly commandsVladimir Ratnikov4-7/+33
Options like: expire_walk_interval_ms,max_reassemblies,timeout_ms can be configured via API, but it's impossible to check them using vppctl, but this can be a useful feature Type: feature Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com> Change-Id: Iac8a96201a7a70b82e9852edc89b819c5d451a58
2020-02-10ip6: fix l4 checksum with hop-by-hop headerMatthew Smith1-13/+23
L4 checksums for IPv6 should be calculated using a pseudo header that includes the source/destination addresses, payload length, and payload protocol. ip6_tcp_udp_icmp_compute_checksum() was using the payload length and protocol from the IPv6 header. If there is a hop-by-hop header (or any other extension header), the payload length used for the pseudo header should only include the upper layer header and payload and not the extension header bytes. Same deal with the protocol, the upper layer next header value should be used instead of the extension header. Type: fix Fixes: cb9cadad57 Change-Id: Ifa2c9ad41c0fc4eea674f0671255b637c8e01f71 Signed-off-by: Matthew Smith <mgsmith@netgate.com>
2020-02-08misc: fix the MAKE_PARALLEL_JOBS for 'make verify' targetAndrew Yourtchenko1-4/+2
MAKE_PARALLEL_JOBS was prepending "-j", which in case of nested targets like "verify" resulted in ninja being executed with "-j -j" flags. Solution: prepend -j only at the moment of setting the MAKE_PARALLEL_FLAGS variable, this keeps MAKE_PARALLEL_JOBS intact regardless of depth of the job call tree. Type: make Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com> Change-Id: I10a69fe527758e5a862852a9f2102aeaca30e88f