Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: I927c9358915e03187cf7d3098c00b85b5ea2f92d
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Improve igmp membership report performance, introduce group and source specific timers.
(side effect compatible with Group-specific query).
Change-Id: Ie3dd2c0dabe5f7138c2f8029e6bbbbfcb5e4904f
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Change-Id: Id90e6fb1211b7789e6e3df0b6579c4757e7fdfa6
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Icdeaad1d5df63bd5e9426958a3b73582bbd226b7
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
[VPP-1251]
Problem:
When the bond subinterface is removed, it was observed that we lost the lacp
partner. Show hardware shows rx counter goes up, but show interface does not
for the slave interfaces.
Cause:
We reset the interface promiscuous mode when the bond subinterface is deleted.
This causes dpdk not to accept any packet. Leave the interface in promiscuous
mode fixes the problem.
Other fixes:
There are few places we use hw_if_index as if they are sw_if_index. But they
don't necessarily have the same value. As soon as a subinterface is created,
they start to diverge. The fix is to use the correct API for the hw_if_index
and sw_if_index.
Change-Id: I1e6b8bca0a4aae396d217a141271cbf968500c91
Signed-off-by: Steven <sluong@cisco.com>
(cherry picked from commit 42c6599bf3057a7e8f4f00f5b6a9dd72af48d283)
|
|
obvious leak of parent_indices
Change-Id: I572b33de1756c8062a87c754117d990622fe12fe
Signed-off-by: Kingwel Xie <kingwel.xie@ericsson.com>
|
|
Change-Id: I228728bacfca6056dc409a96de1bffb9cadcd3e6
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I55f978c84a56bc089e5657c528195b6c84409364
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
(cherry picked from commit df53f5fda277a035984f1de4474f0b58ae15b114)
|
|
Some scenarios not involving ip[4,6]-input paths might benefit from IP
header QOS fields recorded and applied.
An example: L2 (overlay) traffic being encapsulated by VPP in VXLAN
and transmitted on another (underlay) interface might want the QOS
information carried over in the outer IP header.
Change-Id: I4d9462c47ae6ba97680edb1e53340b17cfd7845b
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
For further details, please see
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2018-1059
Change-Id: Icd207f129e5fdcc3d9d8ad56ba5a368926f2804d
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- Add Ole Troan's script from vpp-dev email:
https://lists.fd.io/pipermail/vpp-dev/2017-October/007037.html
Change-Id: I0cbf5118169dc25f0edd659a5a9f5cde8619f780
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
(cherry picked from commit b0a517b6c881ad82ac15e52e832056314216058d)
|
|
set the IS_RX flag based on CLI 'l2-input-on'
Change-Id: I53d9129a7c09f605c1eb55753426f392b1b480bc
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
We should be sending LACP PDU every second if the partner has LACP_TIMEOUT flag
set which means it will time us out in 3 seconds.
Add interface name for lacp trace
Change-Id: If7d816c062d03e80cc0dd7d10dba0b76ace0664a
Signed-off-by: Steven <sluong@cisco.com>
|
|
Should be more resilient to ack losses
Change-Id: Icec3b93c1d290dec437fcc4e6fe5171906c9ba8a
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I9ab11ba9f958c679112eb22c8db39cb269a29dc7
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
When creating an IPsec tunnel interface, allow a numeric
identifier to be set for use in the interface's name in
place of the dev instance. Default to using the dev instance
if no value is explicitly set.
When an IPsec tunnel is deleted, the interface is deleted
now instead of being kept in a pool of available hw
interfaces. Otherwise there was the possibility of
conflicting tx node names between deleted tunnels and
newly created ones.
Change-Id: Ic525466622a0dec38a845fa5871c084f6d9da380
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When enabled then Twice-NAT is applied only when
source IP equals destination IP after DNAT
Change-Id: I58a9d1d222b2a10c83eafffb2107f32c1b4aa3a8
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ibf3ef82950f50b746394a731cd2e7cba1cd16ec4
Signed-off-by: John Lo <loj@cisco.com>
|
|
- use of vlib_log for non-dataplane logging
- redirect of dpdk logs trough unix pipe into vlib_log
- "show dpdk physmem" cli
Change-Id: I5da70f9c130273072a8cc80d169df31fc216b2c2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I1c72d9ddefdc83c7d5ab2564f89d83ffd3fa6110
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I008a4d7ad7160d1f07e7ceef712a5318a9368308
Signed-off-by: Andrey "Zed" Zaikin <zed.0xff@gmail.com>
|
|
hard code the address mask offsets. This are protocol specific and only used on ethernet when used at all.
Change-Id: Ib1f6f33682f53254ffbb5a241a1583e65420e0c7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I53bb1e289ba16ee6d9aed7285b18437c996077a4
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7e6b0e7e91cc032b1685f35de5d84363a85158a5
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I8b57250d5578ec7979c99da15d0ed7d0b70a8872
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: I6c1c855cf5fc2ee06f1c7ddd6576ca16cd556fdd
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This patch addresses the warning 182994
Change-Id: I071f3cbdf9965c7b57d444f79430ee75c66c856e
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
- adds session layer support for datagram based protocols
- updates udp to work in pure connectionless and datagram mode. The
existing connected mode is now 'accessible' for apps as a dummy UDPC,
as in, connected udp, protocol.
- updates udp_echo, echo client, echo server code to work in datagram
mode.
Change-Id: I2960c0d2d246cb166005f545794ec31fe0d546dd
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
https://gerrit.fd.io/r/#/c/7701/ accidentally removed 3 lines of code in
dpdk/device/init.c which were added by https://gerrit.fd.io/r/#/c/7826/
case VNET_DPDK_PMD_VHOST_ETHER:
xd->port_type = VNET_DPDK_PORT_TYPE_VHOST_ETHER;
break;
Those lines were needed to recognize vhost-user interface which is created
via vdev command in dpdk and display VhostEthernet. Without them,
UnknownEthernet is displayed.
Change-Id: I6d7ee6aecc6a415fbb7308595d515649475bcd5f
Signed-off-by: Steven <sluong@cisco.com>
|
|
IP header is set as data + sizeof(ethernet_header_t),
what does not need to be true. The solution is to use
l3_hdr_offset.
Change-Id: I5d9f41599ba8d8eb14ce2d9d523f82ea6e0fd10d
Signed-off-by: Szymon Sliwa <szs@semihalf.com>
|
|
Change-Id: Ieac9cf50156dbbb4962411e900d59256441915ef
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I5e679f2601e37688f2768620479dc2efb7d19ca3
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I3792c524323ce9e300648abe85454cff5d19aba7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I0d10f13a56420b119fdfad97dcc135b245c269e1
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
A poor man's flow switching or policy based rounting.
An ACL is used to match packets and is associated with a [set of] forwarding paths
that determine how to forward matched packets - collectively this association is a
'policy'.
Policies are then 'attached', in a priority order, to an interface when thaey are
encountered as an input feature. If a packet matches no policies it is forwarded
normally in the IP FIB.
This commit is used to test the "ACL-as-a-service" functionality,
which currently compiles, and the existing traffic ACL tests pass in both hash and linear modes.
Change-Id: I0b274ec9f2e645352fa898b43eb54c457e195964
Signed-off-by: Neale Ranns <nranns@cisco.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: Ie20aaf0eb1a5a338a54f0de4d6da661431be5163
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: If813346b665468b25aaf5d95629bcad87212aa3e
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
show vhost-user <interface> may cause a crash if interface is semi-bogus.
Semi-bogus means it is a known vpp interface which has a hw_if_index, but
it is bogus because it is not a vhost-user interface.
The fix is to add a check to reject non vhost-user interface for the
command.
Change-Id: I63f1e8bfbf46f5ec4c30f9fb3546982b63cd7cc5
Signed-off-by: Steven <sluong@cisco.com>
|
|
This patch addresses 182346, 182347, 182353.
Change-Id: I59c3d74bd3a2122b836c93e22ddb632fa032f7fe
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
+refactor decap loop to remove repetitions and goto's
slightly improves performance in scale (3k-4k tunnels) tests (7-9 clocks)
slightly deteriorates performance in single tunnel tests (3-4 clocks)
Change-Id: I1a64ed0279c00481b61a162296c5a30f58bf29c4
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
It is a relatively rarely used low level command for code that didn't change,
but due to infra changes it did not survive. Having it working may be very
useful for corner-case debugging. So, fix it for working with
the acl-as-a-service infra.
Change-Id: I11b60e0c78591cc340b043ec240f0311ea1eb2f9
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit 18bde8a579960aa46f43ffbe5c2905774bd81a35)
|
|
Change-Id: I071d4cfcf6ea9763dd4842a3594c486a8e400e8c
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Removed clang build from main verify since that will be driven
in a seperate job going forward
Change-Id: I6efcad0b99fcc6babc4a7eb1475c99816f2cf175
Signed-off-by: Ed Kern <ejk@cisco.com>
|
|
Add API support similar to VPP CLI "ip probe-neighbor" except API
call is asynch and will not wait, as the CLI does, for address
resolution of probed neighbor. The API client can use the APIs
want_ip4_arp_events or want_ip6_nd_events to get notified of the
desired address resolution event.
Change-Id: Ieab58abe75b5cc7f5185b3b91418b6362f8992d3
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I825f3822910a6ee368b9004e39ca16ac6833e30c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
The vhost binary APIs for add/delete/dump interface were available long ago.
But no unit tests were ever added in make test. This patch is to retrofit
the missing unit tests.
Change-Id: I489521b5ae359a1168ac5880a1f13a5f7e93ce4a
Signed-off-by: Steven <sluong@cisco.com>
|
|
interface)"
This reverts commit 70083ee74c3141bbefb185525315f1b34497dcaa.
Reverting as this patch is causing following crash:
0: /home/damarion/cisco/vpp3/build-data/../src/vnet/devices/devices.h:131 (vnet_get_device_input_thread_index) assertion `queue_id < vec_len (hw->input_node_thread_index_by_queue)' fails
Aborted
Change-Id: Ie2a365032110b1f67be7a9d832885b9899813d39
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
only in lookup context 0
In process of extracting the matching out of the ACL plugin internals,
a couple of pieces setting the miscellaneout fields in the 5tuple structure
did not make it, so they are initialized to zeroes. Move the assignments
to the right place to make both traffic acls and acl-as-a-service working.
Change-Id: I66a7540a13b05113b599f0541999a18fad60385d
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
(cherry picked from commit d3b96ef0d75889f09dc51efb89e5123cdbe7ffe8)
|
|
Change-Id: Id5a2a90d81cc9cb87cb6fb89ac2f4ca3cbcb51e2
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Ic04f419b9c09be34afc390e672793180d56c4665
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|