Age | Commit message (Collapse) | Author | Files | Lines |
|
Type: improvement
Change-Id: I7f28a3f03ab1ea8461c52743c61dc23a57965237
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Direct Verb allows for direct access to NIC HW rx/tx rings. This patch
introduce TX direct verb support for Mellanox ConnectX-4/5 adapters.
'dv' mode must be explicitely selected at interface creation to benefit
from this.
Type: feature
Change-Id: If830ba9f33db73299acdbddc68b5c09eaf6add98
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: feature
Change-Id: I3f287ab536a482c366ad7df47e1c04e640992ebc
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Type: feature
Showing number of allocated chunks by size, in addition to the freelist chunks by size.
Signed-off-by: Ryujiro Shibuya <ryujiro.shibuya@owmobility.com>
Change-Id: I50f7b695a217f132d5f0b307182a34752d3fe1dc
|
|
Type: refactor
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: I7a952fd95e49468a0d1c763b3e289648c93539da
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I7f6f37ec6eed780322e2488d6eb0f5681945ba09
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
ICMP error messages are translated to ICMPv6 error messages with
erroneous destination address in the outer IPv6 header because sender
port is used instead of receiver port.
Both source and destination addresses in the inner IPv6 header are
translated erroneously because source and destination addresses of the
inner IPv4 header are getting zeroed during the translation.
With this commit, use receiver port for translation and save addresses
of the inner IPv4 header before translation of the inner header.
Type: fix
Change-Id: I1e93d54c1bbc154b401adcbb0fb661299655d01a
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
|
|
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I5ec761bfcdc13a8238b83ff46c2f1c53ec0e79d8
|
|
Type: refactor
Change-Id: I761fc764e6771dc95eb64614479c27fd44016690
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
|
|
This fixes a bug in the initialization of handoff_out2in_index and
handoff_in2out_index where the node index for out2in was set to the
in2out node, and vice versa.
Type: fix
Signed-off-by: Elias Rudberg <elias.rudberg@bahnhof.net>
Change-Id: I983ddd3b3cec06f4cb3fb95b2a9cda4ab6d1270f
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I915dace4afe07ac3281f248ef7468fa5247c9668
|
|
Fixes 4 coverity issues
Type: fix
Signed-off-by: Pablo Camarillo <pcamaril@cisco.com>
Change-Id: Ib3ef1df3e5d601d7751445ae1c9603bb6ce0f80c
|
|
Type: fix
Fixes: b49bc1a
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3dd81a2484c8b4925fd07556576c29d1cde337e1
|
|
Patch changes the behavior of session scavenging and fixes multiple
nat issues. Allows proper session clearing and removes issue with lingering sessions
in session db. Patch also updates and fixes CLI/API calls for better readability
of session state metrics. Fixes security issue that would allow attacker to
reuse timed out session in both directions (in2out/out2in).
Type: improvement
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: I78897585a2a57291fad5db6d457941aa0a0457bd
|
|
Type: fix
fetch the sa_index from the correct location
Change-Id: I351035ee0226c47585995ff9122320fd5c73ec53
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Improve dependency tracking on vapi_test directory so that vapi_c_test
rebuild doesn't force vapi_cpp_test rebuild and vice versa.
Type: improvement
Signed-off-by: Klement Sekera <ksekera@cisco.com>
Change-Id: I00094c6374981333858ddbe6ae934cfda3b33a36
|
|
Type: improvement
Change-Id: I298bbb81c753d60288ac63bebf2bdfea323af68b
Signed-off-by: Benoît Ganne <bganne@cisco.com>
|
|
Type: refactor
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I2426211f48b242e51aeb1edc87c1cd21c526dbfa
|
|
Add a clib_time_t * argument to clib_timebase_init(...), to encourage
client code to share the vlib_main_t's clib_time_t object.
Display the current day / date in GMT via the "show time" debug CLI.
Fix the test framework so it processes the new "show time" output format.
Type: refactor
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5e52d57eb164b7cdb6355362d520df6928491711
|
|
A partial revert of gerrit 25729. The last_run_time == 0.0 check is
necessary and remains in place.
Type: fix
Fixes: 3d9f134
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I3d2c9f90b2bc867f02c4749a5b19f997b84185b9
|
|
DPDK provides two new APIs to retrieve information about the Tx/Rx
packet burst mode:
rte_eth_tx_burst_mode_get
rte_eth_rx_burst_mode_get
This patch leverages these two APIs to describe the tx/rx mode.
Currently, Intel X710/E810 and Mellanox Mlx5 support the new APIs.
For NICs that don't support the new APIs, still use the original way
to print their tx/rx function name
Type: refactor
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Change-Id: Ibe47f5debe3b3f17f462fbf9834394e22845cc08
|
|
Type: fix
Fixes: 39e9428b90
VRRP unit tests fail sometimes for changes which have not touched any
code related to VRRP. There were some timing-related changes recently
which probably made the VRRP tests, which rely on a VR changing state
within a certain amount of time, start failing.
Set the VRRP tests to only run with the extended tests rather than
running by default. This is temporary so VRRP will not cause spurious
build failures while a proper solution is figured out.
Change-Id: I5826ea39b944dfb9b0ca4bdfa2ebbe86d269f935
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
When logging is enabled, an empty line input (press Enter only)
will cause SIGSEGV. This patch fixes the problem by checking
the command length first.
Type: fix
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Change-Id: Ib4cbd1c7bfd6a694e289d28958875c7d2356a93e
|
|
Use consistent API types.
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: Ia14f33992353b419b70b55beed63ab8ed6a2e837
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: fix
Change-Id: I2c89accddf2307fa975b71e974d4091499f104ed
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Implements the uN behavior
Type: feature
Change-Id: Icb5efc560e09052cd183b468772cf7f799f81194
Signed-off-by: pcamaril <pcamaril@cisco.com>
|
|
Type: refactor
Signed-off-by: Filip Varga <fivarga@cisco.com>
Change-Id: I81546423200cc7f8a06b527dac8ead191a9e0519
|
|
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Change-Id: I6a938f426b9a8e1242fa5c6f9716a3f9db4d4976
|
|
Type: docs
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I5b27d8b945472388498a4afc4be8dd868bb45ac3
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I5db3457a9fed11d6ecf6eaabcdf8f1d1177b2a9f
|
|
This changeset modifies the log output so that cli commands now look like:
cat /tmp/vpp-cli.log
2020/03/10 19:24:42:186: ***** Start: PID 29570 *****
/* [0] is stdin */
2020/03/10 19:24:53:518[0]: show clock
2020/03/10 19:24:56:078[0]: show clock
2020/03/10 19:25:01:983[0]: show pci
/* [1] is vppctl socket */
2020/03/10 19:26:14:372[1]: show ver
2020/03/10 19:26:23:395[1]: show hardware-interfaces
2020/03/10 19:26:28:507[1]: q
instead of:
cat /tmp/vpp-cli.log
2020/03/01 00:40:12:834: ***** Start: PID 29974 *****
2020/03/01 00:40:24:969[0]: show interface2020/03/01 00:40:31:945[0]: show clo2020/03/01 00:40:41:288[0]: show classify 2020/03/01 00:40:43:753[0]: show classify ?2020/03/01 00:40:53:392[0]: show classify tables2020/03/01 00:40:57:352[0]: quit
Type: improvement
Change-Id: I38d85535977296d174db7121ae340850b6476a39
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Mark a few code coverage tests appropriately:
@unittest.skipUnless(running_gcov_tests, "part of code coverage tests")
def test_my_coverage_unittest(self):
<etc>
Almost exactly like "make EXTENDED_TESTS=yes test".
Type: feature
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ic6d0a097a608ba93442b3d88252f66f8e6805b97
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I0c3b847044d522f55dfd8262afa7c161d5bd5dd3
|
|
Deal with arbitrary kernel reference time changes: for example,
yanking the kernel reference clock back to a time before vpp started.
Best practice involves aligning the kernel reference clock with
reality prior to starting apps which use 10us granularity timers.
Compute change in the reference and cpu clocks. Recompute the vpp
start time reference and and total cpu clock count, using the current
clock tick rate.
Next, compute a new clock rate sample. If the sample seems sane,
factor it into the exponentially smoothed clock rate and recalculate
total cpu ticks based on the new clock rate.
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: Ib6132ffbbe0e6d140725676de5e35be112a31dfe
|
|
siphon used cgi.escape which was deprecated in python 3.2 and
removed in python 3.8.
Update the code to use html.escape instead.
Type: fix
Change-Id: I3192e3f69a4a95fe23cb24e1c29194ba5310932b
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
The recent changes to Makefile lead to the lack of libssl-dev
dependency for ubuntu 16.04 and 18.04. Add libssl-dev to DEB_DEPENDS
variable for corresponding ubuntu version.
Type: fix
Change-Id: I42e0e4761d5ec377de71b11cccf747c7f55ca337
Signed-off-by: Jieqiang Wang <jieqiang.wang@arm.com>
|
|
Type: fix
Ticket: VPP-1837
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I357eb72d478d8175ab9c7cf502d312ab3112213e
|
|
This allows a user creating MPLS tunnel through the bin_api to add a name tag. This is useful
to correlate the Tunnel with its use-case. Also useful if the user needs to recover the MPLS
Tunnel after a restart (mark-sweep).
Type: feature
Change-Id:
Signed-off-by: IJsbrand Wijnands <ice@cisco.com>
Change-Id: Idc080a63810a176ab090a2678a73d2cf9f7b523f
|
|
Use consistent API types.
Change vl_api_ipsec_proto_t to iana values:
ESP 50,
AH 51,
Type: fix
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Change-Id: I2becefb343246e0233f290fefbfdd172d8237325
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
Type: improvement
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I89d33d8e7e7ab049750439b22ba50372fd2261ca
|
|
Type: fix
Signed-off-by: Dave Barach <dave@barachs.net>
Change-Id: I4b3ff6e9c8e1d76037b168aeab36dcb5b4482260
|
|
Type: docs
Change-Id: I311301328fb5e47ba1c3caaff18431738bbd1233
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The port registry uses host byte order for while the session API
uses network order. In a single place the conversion was missing.
Type: fix
Signed-off-by: Andreas Schultz <andreas.schultz@travelping.com>
Change-Id: Ic8cfe2cb4e0711b3e0614060ff6b4f2fe4ed4391
|
|
Use consistent API types.
Type: fix
Change-Id: I7ac7cd00606101864fa3422e7b9ea2f1143665dd
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
|
|
(provided by Andrew/Damjan: git grep -h -B20 VLIB_NODE_FLAG_TRACE_SUPPORTED | grep VLIB_REGISTER_NODE | awk -F [\(\),] '{print $2 }' | sed 's/_/-/g' | sort |sed 's/-node//' )
Type: docs
Change-Id: I4a58fe5ed6bb3598551482ea1c5f16e502cbd6a7
Signed-off-by: Paul Vinciguerra <pvinci@vinciconsulting.com>
|
|
Type: fix
Change-Id: I23250fcbc70086584b5448baec9af9a1528992f5
Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Type: fix
Signed-off-by: Florin Coras <fcoras@cisco.com>
Change-Id: I35fba8f17bdd6e2f5612358608ff6c13f4b431fe
|
|
Type: refactor
Signed-off-by: Simon Zhang <yuwei1.zhang@intel.com>
Change-Id: Ic34729d58a4218046afacaffc765649beb056a24
|
|
policycoreutils-python is now called python3-policycoreutils on
CentOS 8.
Type: fix
Signed-off-by: Renato Botelho do Couto <renato@netgate.com>
Change-Id: I46264c66a2a719d546e0926f3bd716e986461963
|
|
When we get ip-neigbor information using VPP API,
it's age can be very useful information.
This patch adds age entry to API and neighbor type
Type: feature
Signed-off-by: Vladimir Ratnikov <vratnikov@netgate.com>
Change-Id: I822e70ba7a2bdd85fec40930cfc9341ab71f7cb3
|