Age | Commit message (Collapse) | Author | Files | Lines |
|
Remove functions which have native C equivalent (i.e. _is_equal can be
replaced with ==, _add with +)
Add SSE4.2, AVX-512 implementations of splat, load_unaligned, store_unaligned,
is_all_zero, is_equal, is_all_equal
Change-Id: Ie80b0e482e7a76248ad79399c2576468532354cd
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
MLX DPDK mlx5_glue.so, compiled under RTE_LIBRTE_MLX5_DLOPEN_DEPS,
provides a run-time check for OFED libraries.
To do so, it links with -libverbs -lmlx5 so that the binding could
occur or fail at runtime (see DPDK 59b91be and VPP 59b91be).
However RPM install fails on systems without OFED installed since
RPM spec has an entry "Requires: libmlx5".
To overcome this, exclude such requirement from the spec.
Same applies to mlx4_glue.so, compiled under RTE_LIBRTE_MLX4_DLOPEN_DEPS
Change-Id: I0ff6efc49581104743cc7e5b1f7cdbc1665ce9ba
Signed-off-by: Igor Mikhailov (imichail) <imichail@cisco.com>
|
|
Change-Id: I6d1218c17ee055275596b9a49767f15994aa1b2b
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
This fixes ARM64 build where we dont have defined u16x8_msb_mask(...)
Change-Id: I864f5134a0d951601810c800f587d173b3b7ef41
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6d8e1351e088728f7363550a0fc117256cae2841
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I4f245fd225bcc563fafee2696cd039477d661c57
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I1042c0fe179b57a00ce99c8d62cb1bdbe24d9184
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If01400e3434b25b2da36ba28ceb8444b216d0e38
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I44278dea2ee1daa147b0928bfe26e861907a209f
Signed-off-by: Jon Loeliger <jdl@netgate.com>
|
|
Change-Id: I8c64a0d2f757d96ffa7fd042c23b0d814217c215
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Change-Id: I17ba98b48409d907081a0fd8d7db35adf45192ef
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Add a session process node that handles main thread tx and retransmit in
order to avoid having a polling input node.
Change-Id: I3357e987c023a84b533b32793e37ab4204420f64
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Idff55a19d27fed0d57e222f38d2e16c5367911cb
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Add support of NAT66
Change-Id: Ie6aa79078a3835f989829b9a597c448dfd2f9ea3
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
|
|
Change-Id: Ib3fcc3ceb7f315389bcdecbb7d9632540a5dd6ba
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I238106c2afc46904fb0eb17164f30dbd1378892e
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
vnet_feature_enable_disable_with_index() checks the
return status of vnet_config_{add,del}_feature().
If the config string heap index returned is the same
index that was in use prior to the add/delete, it is
concluded that a failure occurred and processing of
the feature stops.
Sometimes the config index that is returned
can legitimately be the same index that was in used
before the add/delete. The old list of features can
have its heap entry deallocated before a new entry for
the new list is allocated. The heap entry for the new
list can be the entry that was deallocated while
deleting the old one.
Make vnet_config_{add,del}_feature() return ~0 on
failure. Look for that return value as an indication
that an error occurred in
vnet_enable_disable_feature_by_index().
Change-Id: I88bb3ff88a76971c1b5e5ece74784ce8ba78373c
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: I2ab7f5d2a30620b12bd345d6102a3d381ee5d5ec
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Add default route to the VRF table in which the interface is bound.
Add missing pool_put.
Change-Id: Id76c7dbfbf9bcf18357f372f3eee9b931df1995e
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: I4b6577b496c56f27f07dd0066fcfdfd0cebb6f1a
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: I484d79000c1bbd87ff83847cf567bf3414a719d3
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I9ede6bc861350c7d9e78fa4d96cd584c2816d06f
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Set vnet_buffer2(b0)->pg_replay_timestamp, for use when desired.
Fix a memory leak in pg_stream_free(...), which wasn't freeing the
replay packet templates.
Change-Id: I01822a9e91a52de4774d2b95cf0c2ee254a915e9
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
During dpdk_lib_init, it calculates MRU and MTU and later calls
rte_eth_dev_set_mtu with calculated MTU value. However, dpdk_device_setup
calls rte_eth_dev_set_mtu with hi->max_packet_bytes, which is set to be
MRU value in dpdk_lib_init earlier.
Most of the time, MRU != MTU in dpdk_lib_init and it looks like
hi->max_packet_bytes is treated as MTU in other parts of vpp codebase.
Therefore, dpdk_lib_init should be consistent and use MTU instead of MRU
for hi->max_packet_bytes.
Change-Id: I23ff2a6cd45d6bc819b6f64d5f0fc0490b8a44de
Signed-off-by: Rui Cai <rucai@microsoft.com>
|
|
Packets arriving on an IPsec tunnel interface
are decrypted and forwarded even if the
interface is down.
Check interface flags. If the interface is down,
cause packet to be dropped and increment the
counters for drops.
Change-Id: I94456bda3bd8eade0f3f522ad7cc341251174e6e
Signed-off-by: Matthew Smith <mgsmith@netgate.com>
|
|
Change-Id: If9cc7c5e32ebecff398fd38b39e8f485754a4ad4
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
- The dpdk plugin always looks for libnuma library during compilation.
For non-numa aware platforms compilation breaks, if third party
libnuma lib is not available.
- Issue is more severe with Cross Compilation scenario where one has to
download and cross compile libnuma-dev package even when target platofrom
is NUMA disabled.
Like when cross compiling for ARM platforms, Linaro tool-chain doesn't have
libnuma by default.
Change-Id: Ib85b3188b787c23ba33b47e3f6123c74fd37190e
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
|
|
Change-Id: I9e2cf74ebe3e8750fa8d03930d2d72f4cae453c2
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: Ie942efab86d24a953fe34754e3d50df54b560dc0
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
DBGvpp# set int ip addr loop0 10.10.10.10/24
DBGvpp# set int ip addr loop0 10.10.10.11/24
set interface ip address: failed to add 10.10.10.11/24 which conflicts with 10.10.10.10/24 for interface loop0
Change-Id: Iba63ffafbd36b6146ce86adb78139da9d55b40ba
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I8f41c659c6f50efd679a56878c6fdcf426ac9410
Signed-off-by: Neale Ranns <neale.ranns@cisco.com>
|
|
Thanks to DucTM for spotting the issue.
Change-Id: I7985560f224c99cf0fdeea0c8457a3ac6f10b03c
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I7b9d28a940e0d7c4a4acda3f4048261c67bf49ff
Signed-off-by: Mohsin Kazmi <sykazmi@cisco.com>
|
|
Replace binary API communication between CP and DP with
direct communication using function calls and callbacks.
Change-Id: Ib54f09062217c028e5ee0e96ae2449cf7e9224e3
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
Change-Id: Id25b447bddccb7b321123e4abc4134e7261a0807
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Instead of repeatedly cutting, pasting, and hacking to create a new
callback, use vnet_flow_rewrite_generic_callback(). Add three
arguments to the flow rewrite callback:
(in) pointer to an array of report elements,
(in) length of array,
(out) pointer to the stream index
Change existing code prototypes. Code owners encouraged to evaluate
whether they can use the generic callback or not, at leisure.
/* ipfix field definitions for a particular report */
typedef struct
{
u32 info_element;
u32 size;
} ipfix_report_element_t;
Best generated like so:
_(sourceIPv4Address, 4) \
_(destinationIPv4Address, 4) \
_(sourceTransportPort, 2) \
_(destinationTransportPort, 2) \
_(protocolIdentifier, 1) \
_(flowStartMicroseconds, 8) \
_(flowEndMicroseconds, 8)
static ipfix_report_element_t simple_report_elements[] = {
foreach_simple_report_ipfix_element
};
...
/* Set up the ipfix report */
memset (&a, 0, sizeof (a));
a.is_add = 1 /* to enable the report */ ;
a.domain_id = 1 /* pick a domain ID */ ;
a.src_port = UDP_DST_PORT_ipfix /* src port for reports */ ;
a.rewrite_callback = vnet_flow_rewrite_generic_callback;
a.report_elements = simple_report_elements;
a.n_report_elements = ARRAY_LEN (simple_report_elements);
a.stream_indexp = &jim->stream_index;
a.flow_data_callback = simple_flow_data_callback;
/* Create the report */
rv = vnet_flow_report_add_del (frm, &a, &template_id);
if (rv)
return rv;
...
Change-Id: If6131e6821d3a37a29269c0d58040cdf18ff05e4
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Idae4ecb60351f2e74bad2f2a33c073de8412fcb0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Change-Id: I1f7877af61f3726cfb7b93ce7893f6df23e866a6
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Adding name, enum constants and formatting code
for failsafe PMD.
This is part of initial effort to enable vpp running over
dpdk on failsafe PMD in Microsoft Azure(2/4).
Change-Id: I4eb0093db9f666e2635f7ddff451e3c9064bd0c4
Signed-off-by: Rui Cai <rucai@microsoft.com>
|
|
Added build related keywords for TAP, FAILSAFE PMD
and also added some missing keywords for mlx4 PMD
This is part of initial effort to enable vpp running over
dpdk on failsafe PMD in Microsoft Azure (1/4).
Change-Id: I2aebf209fbc6db030185f41971b51a593a003a3a
Signed-off-by: Rui Cai <rucai@microsoft.com>
|
|
When port_type_from_speed_capa() is called before the port link update isn't completed,
xd->port_type becomes VNET_DPDK_PORT_TYPE_UNKNOWN. This happens with Mellanox NIC
without lsc interrupt. Calling rte_eth_link_get before getting dev_info will ensure
the link state is up-to-date.
Change-Id: I83a59654778eb4bf0c65a4a4e225a326227b9641
Signed-off-by: Steve Shin <jonshin@cisco.com>
|
|
Scan IPv4 and IPv6 neigbor pool entries once a minute to keep them
up to date. The neighbor of an entry is probed if its time-stamp
is older than 1 minute. If the neighbor respond, its time-stamp
will be updated. If there is no response from a neighbor, its
entry will be deleted when the time-stamp of the entry become more
than 4 minutes old. Static neighbor entries are not probed nor
deleted.
Implemented CLI and API to enable and disable priodic scan of IPv4,
IPv6 or both types of IP neighbors. CLI is "ip scan-neighbor" and
API is "ip_scan_neighbor_enable_disable". Other IP neighbor scan
parameters can also be changed from their defaults via the CLI/API.
Change-Id: Id1a0a934ace15d03db845aa698bcbb9cdabebfcd
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: Ie0eb0127affd3d771d19bb7c60e79c31858d82cd
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I1f7c634328f25b33580a215af2daeb498cd3b181
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: Iaa28f96d613d6fb75bd29958d757de206448eb22
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Due to union, l2 sub-interface bits were wrongly set
causing sporadic misconfiguration of l2 mode on some
interfaces.
Change-Id: Id77ee281e3a0030878641a786c22ffe16ce1c759
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Clean up default and vpp_api_test custom private api segment allocator
ring configurations.
Change-Id: I145b6d64ba0a6315b5ccb07909c8256eeb772146
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
It is much cheaper to use ctzll than to do shift,subtract and mask
in likely case when we are looking for 1st set bit in the uword.
Change-Id: I31954081571978878c7098bafad0c85a91755fa2
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I6306b81e0e1c3e1c591f929a76bb265c1c1d0859
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: Ibea4a96bdec5e368301a03d8b11a0712fa0265e0
Signed-off-by: Damjan Marion <damarion@cisco.com>
|